Used Heavy Lathe for sale (9,397)

Condition: used, Steady rest for lathe fixed Lhsdpfexw Rc Ujx Aaasp Center height approx. 200 mm Bed width: approx. 220 mm Turning center from flat bed: approx. 210 mm Inner diameter: 120 mm Machining diameter: 90 mm Steady rest base: 220 x 60 mm - fixed - swing-open - 3 adjustable sliding bearings Net weight: 14.5 kg Good condition

Condition: used, turning diameter over bed 380 mm turning diameter over slide rest 190 mm turning length 1000 mm bar capacity 56 mm turning speed range 25 - 2000 U/min spindle nose A2-6 total power requirement 4,0 kW weight of the machine ca. 1,5 t Ljdpfx Aaexw Ik Njaohp dimensions of the machine ca. LBH ca. 2,5 x 1,2 x 1,8 m Includes 4-jaw chuck 200 mm Includes 3-jaw chuck RÖHM 200 mm Includes Multifix quick-clamping system with 3 cassettes Includes coolant pump with reservoir Includes various turning tool holders Includes various small parts and centers The electric motor is a bit loud and should be re-gilled if necessary. Otherwise, the gearbox runs quietly and the guides have no grooves, etc.

Condition: good (used), Year of construction: 2010, LZ-Lathe Fabr.JET Type :GHB-1330 Bj.2010 with 3 ash digital indicator, 3 jaws lathe chuck DM 160 mm tool holder Multifix size A, 2 steady rests coolant device. Turning diameter overbed: 330 mm Turning diameter over face: 197 mm Center width: 750 mm Spindle speeds: 70-2000 rpm Lhjdpfxjqwgzqj Aaaop spindle bore : 38 mm Machine in good condition from the training workshop Machine documentation available .

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 215 mm centre distance 750 mm centre height 210 mm hollow 52 mm 3-jaw chuck Röhm Ø 250 mm spindle turning speed range 31 - 1600 U/min connected load 7,5 kW Lhsdpoxxb E Aofx Aaasp dimensions ca. 2050x1350x1250 mm number of spindle speeds 18 weight of the machine ca. 1,5 t - Multifix steel holder - Rotary chuck guard - Work light - Chip guard - chip tray

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures. Lhjdpfx Aexf Iameaajp

Condition: good (used), Year of construction: 1969, operating hours: 9,999 h, functionality: fully functional, Used high-precision lead and feed screw lathe Model: B30 LZB Year of manufacture: 1969 Lhsdpsw Rrwhefx Aaaop Center height: 120 mm Distance between centers: 560 mm Spindle bore: 30 mm Max. swing diameter: 250 mm Speed range: 30-3000 rpm

Condition: used, Steady rest, steady for lathe, travelling type for mounting on lathe carriage. Centre height: approx. 200 mm. Machining diameter: 90 mm. Steady rest base: 60 x 45 mm, Ø 16 mm. Hole spacing: 208 mm. - 2 adjustable bronze guide shoes. Net weight: 6.5 kg. Good condition. Lodpfx Aexw Rc Ioaajhp

Condition: good (used), Year of construction: 2014, operating hours: 9,554 h, functionality: fully functional, machine/vehicle number: SL8-1620455DJAAH, turning diameter over cross slide: 300 mm, turning diameter: 256 mm, spindle speed (max.): 4,800 rpm, travel distance X-axis: 198 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 6,000 mm, total width: 2,200 mm, feed rate X-axis: 19 m/min, feed rate Z-axis: 24 m/min, overall weight: 5,500 kg, bar passage: 50 mm, bar diameter (max.): 32 mm, controller manufacturer: HURCO, controller model: MAX, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, operating hours of spindle: 2,027 h, HURCO TMM8i CNC Lathe - Operating voltage: 400 V Lhjdsxw Sr Dopfx Aaaop - Frequency: 50 Hz - Rated current: 40 A - Connection: 28 kW - Max. swing diameter: 525 mm - Max. diameter over cross slide: 300 mm - Chuck diameter: 200 mm - Acceleration: 0 - 3000 rpm - Turret type: VDI 30 - With a total of 12 stations - Max. spindle speed: 5000 rpm - Indexing time: 0.23 sec - Max. boring bar diameter: 32 mm - Tool shank cross-section: 19 mm - Including powered tool stations The machine is equipped with a bar feeder from BREUNING, type: ILS MUK 7012-III, year of manufacture: 2017. Also included are a chip conveyor, tailstock, and a three-jaw chuck with a diameter of 200 mm. Attention: The item must be collected firmly and bindingly between 19.01.2026 and 23.01.2026 on a date to be agreed. FCA D-76571 Gaggenau – loaded on truck.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Lsdowxw S Iopfx Aaaehp Immediately available! Can be tested under power.

Condition: excellent (used), Lathe, automatic copier LOCATELLI 900 SP C - machine in stock - after the technical review - Italian production TECHNICAL PARAMETERS: - turning length max. 900 mm - turning diameter max. 200 mm - dimension of the element fed automatically max. 110 x 110 mm - main engine power 5.8 kW - pump motor power 4.21 kW - six types of rotational speed Lodpfx Aaeg Dcavsashp - 865/1705/1730/2975/3410/5950 - three main collecting knives - two knives with a hydraulic stroke - feed speed regulation - stroke speed adjustment of the knives - automatic and semi-automatic operating mode - brake Machine dimensions: - length 240 cm - width 150 cm - height 280 cm - weight ~ 1000 kg

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Lhedpfoxxxbzsx Aaasp Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm Lhsdpfx Aaoxwzfysaep control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm

Condition: excellent (used), Year of construction: 1968, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Schaublin, lead screw and feed screw lathe type 135 -Machine bed: hardened -Turning length: 750 mm -Turn diameter over bed: 315 -Rotation diameter over recess: 355 mm -Turning diameter over support: 150 mm -Spindle bore: Ø 34 mm -Spindle speeds: 45 - 3000 rpm Lhodpjw Rd Hbefx Aaaop -Wedge bar chuck: Forkardt Ø 160 mm -Tailstock mount: MK3 -Drive: 1.5/3.0 kW -Accessories: Drawer cabinet with 2x bezels, 28x Multifix tool holders, collets, see photos -Lathe dimensions: 960/1700/H1290 mm -Weight of lathe: 1230 kg -Cabinet dimensions: 480/725/H1000 mm -Weight of cabinet: 222 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle drive power: 7.5/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle drive power: 5.5/3.7 kW - Minimum C-axis resolution: 0.001° - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 8 - Travel X: 140 mm - Travel Z: 235 mm - Travel Y: 70 mm (+/-35 mm) - Driven tool speed: 5,000 rpm - Driven tool power: 1.0 kW LOWER TURRET HEAD - Number of positions: 6 Lodpfx Ajw Igyroaaohp - Travel X/Z: 140 / 310 mm ELECTRICAL SUPPLY - Total connected load: 30 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: 3,100 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 42 mm, spindle speed (max.): 7,000 rpm, rapid traverse Z-axis: 60 m/min, overall weight: 5,500 kg, bar passage: 42 mm, bar diameter (max.): 42 mm, power: 57 kW (77.50 HP), bar length: 3,300 mm, Equipment: documentation/manual, rotational speed infinitely variable, 3 turrets Main and counter spindle C-axis on main and counter spindle Conveyor belt IEMCA Boss – bar feeder Chip conveyor High pressure Machine operates with emulsion Lhodpfx Aaexwwd Seajp

Condition: excellent (used), CNC cycle lathe Haas TL1 (Machine from training) Year of manufacture: 2010 Spindle hours approx. 500 Swing diameter over bed: 508 mm Swing diameter over cross slide: 279 mm Turning length: 762 mm Wedge bar chuck ROTA-S 200 (Prepared for hydraulic chuck with foot pedal) Travel paths: X: 203 mm Z: 762 mm Rapid traverse X/Z: 11.4 m/min Drive power: 7.5 kW Torque: 146 Nm Spindle bore: 58 mm The machine comes from training and was only rarely used. Therefore, the low spindle hours. Very good condition and immediately ready for use. Lhodpfx Ajxwtqboaaep

Condition: used, Year of construction: 2001, turning diameter 210 mm travel: . x-axis 215 mm Lodexwzhujpfx Aaajhp z-axis 508 mm Number of tools in turret 10 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2007, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32 model was produced, which has the following main features: Maximum turning diameter: 32 mm (optional 38 mm) Maximum turning length: 320 mm per clamping operation Maximum drill diameters (front): 12 mm Maximum tapping size (front): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Rear spindle speed: up to 8,000 rpm Lhsdpfxevz Atdo Aaajp Number of tools: maximum 25 to 27 Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm Weight: 4,300 kg This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in manufacturing.

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Lhodpfx Aswuddvjaajp Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: used, Year of construction: 2013, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32V model was produced, which has the following main features: The special feature of this machine is the open storage Maximum turning diameter: 32 mm (optional 38 mm) Maximum turning length: 320 mm per clamping operation Maximum drill diameter (front): 12 mm Maximum thread size (front): M12 (with cutting tap) Lhsdpfsvz Azbsx Aaasp Main spindle speed: up to 8,000 rpm Rear spindle speed: up to 8,000 rpm Number of tools: maximum 25 to 27 Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm Weight: 4,300 kg This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in production.

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Lhodpfx Aevzg Skeaaop Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: used, The Citizen M32 is a CNC lathe with a movable headstock that was designed for high-precision machining. The M32V model was current in 2008. Here are the most important technical data: Maximum bar diameter: 32 mm (optional 38 mm) Lhodevz Twgepfx Aaaop Maximum machining length per clamping operation: 320 mm Maximum drilling diameter (front spindle): 12 mm Maximum threaded hole (front spindle): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Maximum clamping diameter (counter spindle): 32 mm (optional 38 mm) Maximum drilling diameter (counter spindle): 12 mm Maximum threaded hole (counter spindle): M12 (with cutting tap) Maximum workpiece length for the counter spindle: 145 mm Counter spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Number of turning tools: 5 Number of driven tools: 5 to 7 Number of stations in the turret: 10 Tool sizes: Turning tools 16 mm square; Boring bar holders 25.4 mm diameter Dimensions (L × W × H): 2,860 × 1,465 × 1,900 mm Weight: 4,300 kg This machine is characterized by its high rigidity and precision, which makes it ideal for complex machining tasks. It has a powerful main and sub spindle and versatile tool configurations that enable efficient and flexible production.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Important Note: This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Lhsdpfoxgg Rmox Aaajp Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without regripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. tapping diameter: M 6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. tapping diameter: M 3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing on main spindle: 1° Rapid traverses Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Pneumatic connection Compressed air connection: Min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 x 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Minimum input increment: 0.001 mm Lhjdpfxsxgd Rke Aaaep Minimum output increment: 0.001 mm (Z) / 0.0005 mm (X) Input mode: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Part ejector and removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with swiveling spray arms Power chucking system for main and sub spindles

Condition: used, Year of construction: 2021, operating hours: 3,557 h, functionality: fully functional, Technical data With FANUC 0i-MF control - Table dimensions: 850 x 400 mm - Max. table load: 250 kg - Table height from the floor: 850 mm - Travel paths: - X-axis: 710 mm - Y-axis: 400 mm - Z-axis: 350 mm Spindles, tools and axes - Spindle speed: 12,000 min⁻¹ Lhjdpfxjvzaw Ts Aaasp - Spindle cone: BBT 30 - Max. number of tool positions: 20 - Rapid traverse (X, Y, Z): 60 m/min - Tool dimensions: - Max. tool diameter: Ø 68 mm - Max. tool length: 200 mm - Max. tool weight: 3.0 kg - Tool change time: 0.9 sec Drive power - Main spindle: 13 kW - Coolant pump: 3.7 kW Machine data - Dimensions: 2,100 x 2,600 mm - Machine height: 2,700 mm - Machine weight: 3,150 kg Control - Type: FANUC 0i-MF with 8.4" LCD color monitor Automatic door The machine is equipped with an automatic door that makes it easier to open and close the machine. This ensures greater user-friendliness and safety during operation. The machine is equipped with a Keyarrow chip conveyor that ensures the efficient transport of chips and makes cleaning easier. First commissioning: 03.2021  Disclaimer Disclaimer: All technical data and information have been provided to the best of our knowledge and belief. We accept no liability for any errors or mistakes. Please check the information carefully and do not hesitate to ask questions if you have any questions.