Used Herma for sale (1,356)

Year of construction: 2015, condition: used, functionality: fully functional, REGENERATIVE THERMAL OXIDIZER (RTO) system RELOX REGENUS 2040/2 for sale! Availability: November, 2025 Layout in attachment below REGENERATIVE THERMAL OXIDIZER (RTO) Main Technical Parameters – Relox REGENUS 2040/2 (RTO) Production year: 2015 Max. exhaust air flow: 40,000 Nm³/h Thermal power (hot water exchanger): 1,000 kW Kedpfx Asw Hb Ebsanjfa Heat recovery efficiency: > 96% Oxidation temperature: ~800–850 °C Max. burner chamber temperature: 1,000 °C Gas burner power: ~600 kW (turn-down ratio ~1:5) Control system: PLC Hot water heat exchanger Installation dimensions (L×W×H): Approx. 7,100 × 5,250 × 6,300 mm Weight: ~36.2 t

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Kfsdpfev Si Szjx Aanoa Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 1999, thermal exhaust air incineration plant, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -System: is currently still in operation and can be demonstrated -Protocols: regarding maintenance and emissions are available Kodpfxjvtzdlo Aanofa -Documentation: fully available -Combustion chamber temperature: 850° C -Heating medium: natural gas -Heating value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Kfedpjvx E Rajfx Aanoa Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Kfodpsvkg H Tefx Aanoa Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: used, This listing is for the Techne TC 3000 Well Thermal Cycler The unit is in full working condition and is ready for immediate use The Techne TC‑3000 (models FTC3/02 and FTC3/05) is a compact, robust, and cost-effective PCR thermal cycler, ideal for personal use, educational settings, and basic molecular biology research. Despite its small footprint, it delivers high performance, reproducibility, and flexibility. Key Features Compact and Low Cost One of the smallest and most affordable thermal cyclers on the market. Weighing ~5 kg with a footprint of just 33 × 17 cm, it's perfect for labs with limited space. Available with interchangeable blocks: FTC3/02: 25 × 0.2 mL microtubes FTC3/05: 20 × 0.5 mL microtubes Fast Peltier-Based Cycling Efficient thermal transfer with rapid heating (up to 3.6 °C/s) and cooling (up to 2 °C/s) using advanced Peltier elements. Heated Lid with Selectable Temperature Adjustable from 100–115 °C, the heated lid minimizes condensation and reduces the risk of sample evaporation. It can be enabled or disabled as needed, making it suitable for a range of PCR tubes and strip types. Kfjdpexhfzaofx Aanea Unparalleled Block Uniformity Delivers consistent results with ±0.1 °C block uniformity at 50 °C, ensuring optimal reproducibility across samples. Wide Temperature Range From 4 °C to 99 °C with precision control (±0.1 °C), supporting even demanding PCR protocols.

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow Kfsdpfx Aspm U U Noanea * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: excellent (used), functionality: fully functional, mileage: 5,30,200 km, power: 235.36 kW (320.00 HP), first registration: 08/2020, fuel type: diesel, maximum load weight: 8,000 kg, overall weight: 18,000 kg, color: white, loading space length: 8,350 mm, loading space width: 2,450 mm, loading space height: 2,530 mm, 2020 RENAULT D WIDE 180-320 REFRIGERATED TRUCK FRC DIMENSIONS 8.35 X 2.45 X 2.53H Kedpow Tl Ufefx Aansfa

Condition: used, Refrigeration compressor, refrigeration machine, refrigeration compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermal expansion valve -Manufacturer: Alco, thermal expansion valve, unused in original packaging -Type: TIE-MW 55/PCN 802456 -Price per piece -Number: 2 piece -Dimension package: 105/80/H70 mm -Weight: 0.4 kg/piece Kfsdpsfyh Dtsfx Aanja

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Ksdpfjwtg Hdox Aanefa

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2022438, type of input current: AC, power: 28 kW (38.07 HP), input voltage: 400 V, Equipment: documentation/manual, Monti Antonio 200 VSP-2250x1600 Thermal Press – As New Condition (Year of Manufacture: 2023) For sale is a nearly new Monti Antonio 200 VSP-2250x1600 thermal printing press (year of manufacture 2023, serial number 2022438). The system has been used exclusively for sublimation printing on blankets and is in perfect, fully operational condition. Technical specifications: Year of manufacture: 2023 Serial number: 2022438 Connected load: 28.7 kW Kjdpfsw Skhujx Aanefa Power supply: 400 V / 3~ / 50 Hz Working area: 2250 x 1600 mm Net weight: approx. 5,870 kg Condition: as new, fully functional Application options: Sublimation printing (textiles, blankets, large formats) Laminating, bonding Thermal transfer and finishing processes Also suitable for applications in advertising technology and industrial textile printing The machine is immediately available and can be inspected on site by appointment.

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Kfjdpfow Hxgvox Aanja Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, For sale are 10 high-quality aluminum tent halls from 2016, model LX1200.320.T.100.001_E, which are characterized by their exceptional stability, durability, and flexibility. These modern tent halls are the perfect solution for a variety of applications, including storage areas, workshops, showrooms, event tents, and much more. PRODUCT FEATURES: Model: LX.1500.520E.S100.P252 Kjdpfx Aasv N Txgonofa Double-skin PVC thermal tarpaulin Frame material: Robust aluminum – corrosion-resistant and particularly lightweight, ideal for permanent or temporary structures Dimensions: Length: 50 m Width: 12 m Ridge height: 5.20 m Inner clearance: 3.25 m from base plate Trafter spacing: 5 m Sandwich roof thickness: 10 cm roof / 6.5 cm walls Structural analysis available Tent testing can be re-performed Roof tarpaulins have been cleaned once Tents are dismantled and picked Roof material: High-quality double-skin thermal tarpaulin, UV-resistant PVC tarpaulin, water-repellent, weather-resistant, and durable Floor: Optional floor structure or anchoring as required Color: Standard in White Weather resistance: High wind and snow load tolerance – ideal for year-round use Certifications: Meets all relevant standards for wind and snow loads, certified according to European standards Snow load zone 1-3 SPECIAL BENEFITS: Lightweight: The aluminum frame makes the tent hall particularly light and easy to transport and set up without compromising on stability. Flexibility: Assembly is quick and easy – ideal for both temporary and permanent use. Versatility: Suitable for many applications such as event tents, warehouses, workshops, exhibitions, retail spaces, or as emergency shelter. Price upon request – We will provide you with a customized quote. Conclusion: The aluminum tent hall LX1200.320.T.100.001_E is the ideal solution for anyone needing stable, cost-effective, and durable accommodation. Their versatility and ease of use make them an excellent choice for companies seeking fast and flexible solutions. Visit and further information: You are welcome to visit the tent halls or request further technical details.

Condition: new, T63290IO - Armor Kodpfx Aaek Abhasnefa INKANTO thermal transfer ribbon, AWR 470 wax, 90mm, black INKANTO thermal transfer ribbon, AWR 470 wax, roll width: 90mm, core: 25,4mm, length: 450m, color: black

Condition: used, Thermal motor contactor relays, relays, heating current monitoring, preheating for generators, contactor, semiconductor contactor, contactor -60-100 A Class 10 Ksdpfeb A Svyox Aanjfa -Weight: 0.8 kg

Condition: good (used), Tricool Thermal oil heater Model: SHK509A Sheik Thermail oil heater, adjustable digital controls, up to 350'C, mobile Kfsdpfx Ajrwz N Ijanoa

Condition: not inspected (used), 7m x 1000mm thermal oil fryer with top hold down belt. Has come from factory producing chicken burgers and nuggets for major fast food chain. 7m frying length, 1000mm belt width. Kfodpsigruyofx Aansa

Condition: excellent (used), Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. With its compact dimensions of 188 x 80 x 98 mm, the system can be easily installed in or on production lines. The printhead achieves top speeds of more than 180 m/min and has an IP65 protection rating. The printing system is equipped with a display for data entry, as well as for changing and reviewing system settings. Operators can review or change variable print information and settings directly on-site using the user-friendly display. Intuitive control is via an i-Logic button. Maintenance status can also be displayed on the display. The Integra One is particularly compact, measuring 188 x 80 x 98 mm, and was specifically designed for system integration. Smart Cartridge Monitoring The intelligent SmartCard cartridge monitoring system identifies the current ink type and automatically sets the appropriate ink parameters. The chip records and stores the current ink level and therefore detects opened cartridges. Thanks to the Click'n Print cartridge holder, changing ink is quick and easy. Maximum print speed (300 dpi horizontal) up to 180 m/min depending on configuration Horizontal print resolution adjustable from 50 to 900 dpi Vertical print resolution 300 or 600 dpi depending on configuration Maximum print height 12.5 mm Technology HP MK3 Authentication SmartCard Text field yes Counter yes (depending on configuration) Time yes (depending on configuration) Date field/date offset yes (depending on configuration) Logo yes Variable input yes (depending on configuration) Action fields yes (depending on configuration) 1D code/2D code yes (depending on configuration) Data transfer via USB stick yes (USB-C) Ethernet yes (depending on configuration) Wi-Fi optional EIA232 yes Kodpoq Tp Rmofx Aanofa Password levels yes (depending on configuration) Configurable inputs and outputs yes (depending on configuration) You can find more items - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Kodak Thermal Imaging Head Part-Number R507-00134A Kedsiy Nx Ajpfx Aanjfa • 50W 630nm • 10mW 680nm

Condition: used, functionality: fully functional, Thermal oil fryer for products with or without coating. Includes: * Heat exchanger: 6.10 m x 0.50 m x 2.40 m (L×W×H) * Oil filter: 1.25 m x 1.14 m x 1.05 m * Cylindrical filter: Diameter: 40 cm x 60 cm High * 2 Centrifugal pumps: 1.04 m x 0.40 m x 0.67 m * Control panel: 1.10 m x 0.50 m x 1.95 m Operation: Press the transfer pump switch so as to fill the machine with the frying oil. Kedpfxswnx Rds Aansfa Once you reached the level that the rotary filter indicates, you have to start the recirculating oil pump, the rotatory filter, the lumps collector helicoid and the upper and lower conveyors. At this point, select the frying temperature which will depend on the product to fry. By reaching the selected temperature, you will be able to start the run switch of the blowers located in the extractor hoods.

Condition: used, thermal switch, circuit breaker, electric circuit breaker, thermal switch, temperature switch, thermostat controller -Manufacturer: AEG, thermal switch thermostat controller unused original packaging Kfsdpfx Asmt Rawjanja -Type: EGO II K 662 980 599 -Voltage: 16(4)A/380V -Number: 2x controller available -Price per piece -Dimensions cardboard: 140/85/H40 mm -Weight: 0.1 kg/pc.

Condition: used, A good used Thermal Transfer Overprinter from Domino - Model V320i with Touch Screen Controls & Printer mounting Frame Kodswmfp Depfx Aansfa

Condition: good (used), functionality: fully functional, Tunnel Freezer (Thermaljack Freezer) Brand Mayekawa (Japan) Kfedpfexxl Diox Aansa Mode lMMF-2409 T L-AX-Dual Belt width 240 mm Belt lenght 3100 mm Production Capacity nugget 400 kg/hr,(50 mm product width) Total Volume/Cap. 1000 kg/hr, (100-150 mm-product width),120 g/pcs Power 150 kW, 3 Phase Cooling type NH3

Year of construction: 2023, condition: new, We are exclusive agent and distributor for China top class machine tools with stocks and Maintenance team. Here is Shenyang SYMG slant bed CNC turning lathe HTC 50P. Product description: 1. High rigidity feed system: In order to compensate for the elongation of the lead screw caused by the rise of the working temperature, and ensure the positioning accuracy of the lead screw and the system rigidity of the ball screw when it is used, the lead screw is pre-tensioned and pre-tensioned according to a certain thermal elongation before assembly to eliminate the impact of temperature rise on the accuracy. 2. High rigidity servo tool rest: Adopt servo 12-position tool rest. The turret adopts servo-driven hydraulic locking mode, and the turret is silent, high speed, large torque and fast tool change. The locking cylinder inside the turret is matched with a precise concave and convex tooth positioner, which has high positioning accuracy for tool change, can convert the tool forward and backward, and can bear heavy cutting. 3. Slide rail configuration: HTC50 series optional sliding guide rail structure, higher rigidity, suitable for re-cutting, etc. Max. swing diameter 700/670/670mm Max.turning diamter ShaftΦ500/ DiscΦ550mm Max.swing diameter over slide 500mm Max.working length 1000/1500/2000mm Spindle hole diameter 104mm Spindle speed 35-3000 rpm Kodpfji Ewi Dox Aanofa Chuck diameter 12" X axis travel 320mm Z axis travel 1050/1550/2050mm 12 position turret. With FANUC system. This series SHENYANG CNC Slant bed lathe also with related types: HTC 40P, HTC40B, HTC 4050S, HTC 50E, HTC 50B, HTC 50P Just contact us if any further details are required.

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph Kodpsx D Dfisfx Aanofa FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET