Used Hess for sale (58)

Condition: excellent (used), Year of construction: 1990, Glue press for thickness 6 meters working height 1150 mm width 150 mm. Hydraulic power unit 1,5 kW .Hydraulic press for gluing elements for windows and doors. Ppodpet Iuuiofx Afhel

Condition: like new (used), functionality: fully functional, total width: 2,600 mm, total height: 1,250 mm, Motor power: 0.75 kW with a drill head for drilling corner bearings and olives Ppedox Ez Uajpfx Afhel automatic height sensing

Condition: ready for operation (used), Year of construction: 1993, mobile, drilling from the front, 1 core drill D=34 mm, 2650 mm long, approx. 1200 mm deep, operating manual Ppjdpfx Afox Ez Nkshsl

Condition: excellent (used), Year of construction: 2003, Hess RH 1500 Pjdpjxza Hqefx Afhopl Year 2003 Pallet size: 1400 x 950 mm, extendable to 1100 mm. With surface mixing, automatic opening/closing via remote control, machine in as-new condition. 2 Hess lifts with height for 18 levels, single pallet Hess pallet truck, single pallet, laser positioning. 14 Rotho curing chambers, good condition Hess cuber with 4-sided clamp. Plate conveyor, approx. 25 m long. Pallet turner, pallet brush. Siemens S7 control system. 7-mould block 1500 Assyx pallets Ridder horizontal strapping machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Double feed vibropress Hess RH 1500, year of manufacture 2008/2009, hydraulics – 2 moulds, control unit. Hess product packaging machine, year of manufacture 2008/2009, hydraulics. Ppedpfoxzal Hox Afhel

Condition: like new (used), Year of construction: 2024, operating hours: 5 h, functionality: fully functional, Mini Rheometer – Precise Analysis of Crosslinking Behavior The Mini Rheometer is a high-precision testing device for determining the crosslinking behavior of rubber and other crosslinkable polymers. Versatile Application Options ✔ Determination of processing time for resins, cements, and adhesives ✔ Use in the dental industry ✔ Suitable for research, development, and rapid product inspection Efficient & Fast Testing The test duration matches exactly the crosslinking time of 1 g of material at the set temperature. Operating principle: Linear shear deformation according to DIN 53529 Part 1 Pjdpfexzrbajx Afhopl Innovative Technology for Reliable Results ✔ Hinged measuring chamber with integrated sensor paddle ✔ Fast temperature stabilization due to the small chamber volume ✔ Dynamic measurement using sinusoidal shear loading with low amplitude and frequency ✔ Precise data acquisition via a load cell, connected to modern electronics & software ✔ Display of the crosslinking isotherm & evaluation according to DIN 53529 Part 2 Scope of delivery: Mini Rheometer, software, Windows 11 PC, volume punch

Condition: used, Year of construction: 1986, - 2 pneumatic printing cylinders in length - 2 pneumatic pressure cylinders in width - 2 pneumatic workpiece hold-downs - feed belt width: approx. 680 mm - feed belt length: approx. 3.400 mm Psdpfjiim Rnox Afhjpl - clamping area: 680 x 1.400 mm - control panel Machine dimensions: - Length: approx. 3,400 mm - width: approx. 1.700 mm - height: approx. 1.400 mm - Weight: approx. 800 kg

Condition: used, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja_yes Pedjvu Hgzepfx Afhjpl boring of olive 1=yes, 0=no 1 ja_yes 1 HESS fitting drilling station for corner bearings and olives This Hess drilling station for tradesmen offers a lot of drilling technology for little money. A complete station for drilling corner bearings and olives with all the important features, such as 2 clamping cylinders, drilling depth sensing, effective suction, stop systems for corner bearing and olive drilling, drilling head with interchangeable chuck, adjustable drilling feed speed, automatic program sequence. This means technology for perfect work: just one machine with just one drilling unit and just one drilling head for 2 work steps. The system: - Base frame as a support wall for frames and sashes up to 100 mm - Drilling unit positioned in the middle, height manually adjustable via threaded spindle - Drill hole position and depth set to the specified fitting type, can be adjusted via a stop system when changing types - Drilling feed speed can be variably regulated via throttle valve - Direct extraction - Electro-pneumatic control system with automatic Program sequence for - Fixing workpieces - Drill motor on - Drilling unit forwards - Drilling - Drilling unit backwards - Drill motor off - Releasing workpiece fixation - Fixed stop systems Basic equipment / Technical data: Sturdy base frame as a support wall, precise support made of abrasion-resistant and dimensionally stable plastic, for frames and sashes up to 100 mm thick, Corner bearing and olive drilling in one machine and in one drilling unit, simple and convenient, vertical work, easy handling, no templates, minimal time required for the safe workpiece positioning, guarantee for exact and precise drilling, 2 clamping cylinders for immovable fixation of sash or frame, adjustable to different wood thicknesses, side stop in the rebate for the corner bearings, ergonomically arranged stop system for olive drilling with 14 swiveling stops and additional color markings, fixed stop system for drill hole height determination when changing from corner bearing to olive, automatic drilling depth sensing for corner bearing and olive, drill unit with quick-change chuck for the various tools for corner bearing and olive, tool change in "no time", automatic program sequence, clean work thanks to effective suction, small space requirement and mobile thanks to steering/brake rollers. Electrical equipment in accordance with VDE. Electrical connection: 0.55 KW, 400 V, 50 Hz. Pneumatic connection: R 3/8", 4 - 8 bar Extraction connection nozzle: 1 x 100 mm diameter Extraction speed: 25 m/sec. Space required: Width: 2600 mm Height: 1250 mm Depth: 800 mm Support height: 300 mm Paint finish: RAL 7030 stone grey with RAL 1018 zinc yellow 1 drill set with 1 drill 25 mm and 2 drills 10 mm plus 1 drill 34 mm diameter (technical data according to manufacturer - no guarantee!)

Condition: used, Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with Psdsv D Rg Dspfx Afhopl forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: used, Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Ppsdpfot Tqy Esx Afhsl Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Year of construction: 2008, condition: ready for operation (used), Single hopper vibropress with full circulation, 2008. The line includes : - Rotho dryer for 2,970 places, - pallets (bretts) 1400x1100, - Sicoma MP2250 / 1500 mixer, - charge for 4 materials for production, Psdpfx Aeiwa H Defhepl - silos 120 and 60 tons, - over a dozen forms, mainly produced by Rampf Formen The line has been operating since 2009, only 5 days a week. It is used for the production of ceiling blocks and concrete blocks. The line layout was built under the existing hall so it does not take up much space.

Condition: used, Year of construction: 1993, used, in excellent condition Brand: Hess Podpfx Afsxuv N Uehjpl Model: Express Year of manufacture: 1993 Machine no.: 100914/28 Cylinders per press element: 2 - 110 mm stroke Number of press elements horizontal: 3 Number of press elements vertical: 3 Working width: 2500 mm Working height: 1350 mm Press depth: 600 mm Pneumatic Height adjustment: electric Space requirement approx. 3600 x 800 x 2450 mm Weight approx. 1200 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Ppjdpfx Afjtgkwfehsl Pneumatic

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Rotary press Hess Year of manufacture: 1990 Technical condition: Very good Ppsdpfx Afswyum Sshsl Maximum dimensions of the manufactured product: length 3.2 m, height 1 m, width 145 mm

Condition: excellent (used), Year of construction: 2000, HESS rack trolley, lifting and extending platform, year of manufacture 2000 Podoxmu Elepfx Afhjpl

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Ppodjw I Ui Uepfx Afhel Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: used, mileage: 9,31,635 km, power: 228 kW (309.99 HP), first registration: 12/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Euro standard: Euro 5 Mileage according to speedometer Gearbox: Automatic ZF Seats: 30+2+1 high/fixed Standing places: 49 _____ Safety * Retarder * ABS, EBS * Fog lights * Rear view camera Passenger compartment * Auxiliary heating * Air conditioning * Double glazing * Driver microphone * Stroller space * Wheelchair ramp * Wheelchair space * Stop request Exterior * Matrix Ppedpfevl Ui Eox Afhsl * 3x double-width doors * Raising/lowering system * Power steering * Sun visor * Electric exterior mirrors * Roof hatches, ventilation, roof ventilator Audio & communication * Radio * USB port Other * Twin tires * Tires: VA 70%, HA 70%. * Our internal vehicle number: 11241. Subject to errors. Images and text may differ from the vehicle. Always over 300 additional vehicles on offer.

Condition: used, mileage: 8,84,791 km, power: 228 kW (309.99 HP), first registration: 11/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, next inspection (TÜV): 11/2012, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Euro standard: Euro 5 Mileage according to speedometer Gearbox: Automatic Seats: 30+2+1 high/fixed Standing room: 49 _____ Safety and security * Retarder * ABS, EBS * Fog lights * Reversing camera Passenger compartment * Auxiliary heating * Air conditioning * Double glazing * Driver's microphone * Stroller parking space * Wheelchair ramp * Wheelchair space Ppjdpfx Afovinvgohsl * Stop request Exterior * Matrix * 3x double-width door * Lifting / lowering system * Power steering * Sun visor * Electric exterior mirrors * Roof hatches, roof ventilator Audio & communication * Radio * USB connection Miscellaneous * Twin tires * Tires: VA 40%, HA 40%. * Our internal vehicle number: 11219. Errors excepted. Pictures and text may differ from the vehicle. Constantly over 300 other vehicles on offer.

Condition: used, mileage: 9,61,060 km, power: 228 kW (309.99 HP), first registration: 12/2012, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Equipment: ABS, air conditioning, parking heater, Euro standard: Euro 5 Mileage according to speedometer Gearbox: Automatic Seats: 30+2+1 high/fixed Standing places: 50 _____ Safety * Retarder * ABS, EBS * Fog lights * Rear view camera Passenger compartment * Auxiliary heating * Air conditioning * Double glazing * Driver microphone * Stroller space * Wheelchair ramp * Wheelchair space * Stop request Exterior * Matrix * 3x double-width doors * Raising/lowering system * Power steering * Sun visor * Electric exterior mirrors * Roof hatches, roof ventilators Audio & communication * Radio * USB port Pjdpfjvl A T Ssx Afhjpl Other * Twin tires * Tires: VA 30%, HA 20%. * Our internal vehicle number: 11220. Errors excepted. Images and text may differ from the vehicle. Always over 300 additional vehicles on offer.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: P 0981000432100, Strong hydraulic press used for gluing block wood and door or window frames after service all functions are functional can work in manual and automatic mode. Ppsdpfx Afovzbcwehel

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Ppedpfx Afjbnnyiohol Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg in mobile version

Condition: used, Year of construction: 1980, Used machine Condition: Function tested Ppsdpfxswkbd Ss Afhel Equipment and technical data: Vertical cylinders: 4 pcs Vertical cylinder stroke: 80 mm Vertical cylinder adjustment: manual Vertical cylinder clamping: perforated grid Horizontal cylinders: 2 pcs Horizontal cylinder stroke: 80 mm Cylinder type: pneumatic Pressure beam adjustment: manual Horizontal pressure beam clamping: perforated grid Pressing process control: push button Dimensions (L x W x H): 3200 x 750 x 2350 mm Location: Röllbach Availability: Short-term

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: HL 2100 4290 0215, Hess Pressen Ppedpfoxqcdwsx Afhjl Type: Hydro-LUX Year of manufacture: 1990 Serial No.: HL 2100 4290 0215 380V 2.6 kW

Condition: excellent (used), Year of construction: 1984, Oil-hydraulic frame press Type: Hydro Year of manufacture: 1984, 1.1 kW Weight: approx. 1500 kg 3 vertical and 2 horizontal beams Pressing dimensions: 4000 x 2550 mm Frame size: 4900 x 800 x 2500 mm Pjdjv Im Hnopfx Afhepl Clamping beam size: 2850 x 800 x 500 mm

Condition: excellent (used), Working length 250 cm Height 136 cm Width 60 cm Pneumatic drives Ppsdpowgky Usfx Afhel Electric lifting