Used Gebr Hezel for sale (448)

Condition: new, Gebr. Heller uni-Pro DIGI-Drive E3 23.020212 X VPS 30A-N12, unused, in sealed original packaging, 100% functional Hnodsi D U Sfepfx Anvsn

Condition: used, Year of construction: 1993, Technical details: Hedpfxsu Nxdfo Anvonn material: PUR Schaum Rotor-Ø: 315 mm compressed air: 6 bar The milling plant with milling and opening-up machine REKORD BR-ex (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel *

Condition: ready for operation (used), * Brand: Gebr. Pfeiffer * Type: ball mill * Length: 4000 mm * Inner diameter: 1700 mm * Power: 110 kW e-motor Hjdszakl Nepfx Anvjnn * Includes: grinding balls 30–60 mm * With: rubber inner lining and protective covers * In stock: 2 units

Year of construction: 1984, condition: ready for operation (used), Distance between the uprights: 4300mm, cutting length: 4050mm, blade length: 4200mm, cutting angle adjustable: 1.5-2.5°, min./max. strip width with front gauge: 40mm, min./max. strip width with rear gauge: 1000mm, table height above floor: 850mm, table length: 4200mm, table width: 650mm, with 3 extension arms each 500mm, internal distance between cutting blade and hold-down plus 10mm: 35mm, lower blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, upper blade: 1 piece, length: 4200mm, thickness: 35mm, divided into: 2 sections, number of cutting edges: 2, guide rulers for square cuts: 1 piece, accessories/special equipment: gauge adjustment, table extension, sheet metal chute, side gauge 1000mm, cutting line illumination, with documentation. An on-site inspection is possible. Hsdoy U Nqbopfx Anvjnn

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: SV 5960/1, overall weight: 73 kg, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 21 A, type of input current: three-phase, rotational speed (max.): 2,930 rpm, protection type (IP code): IP55, For sale is a high-performance air blower / side channel compressor with a high-quality 11 kW three-phase motor. This unit is suitable for industrial applications such as ventilation and exhaust systems, dust extraction, pneumatic conveying, drying systems, or process air supply. Technical data: Power: 11 kW Voltage: 400 V (three-phase) Frequency: 50 Hz Current consumption: 21.8 A Speed: 2,930 rpm Efficiency: IE3 Premium Efficiency (91.2%) Protection class: IP55 Insulation class: F Operating mode: S1 (continuous operation) Hsdpfx Asy U Uhlonvonn Frame size: 132M Design: IMB5 Ambient temperature: up to 40 °C Weight: approx. 73 kg Made in Germany

Condition: used, Year of construction: 1971, Technical details: grinding length: 700 mm workpiece height: 80 mm Table dimensions: 105 x 725 mm feed range: mechanisch total power requirement: 0,8 kW dimension machine xH: 0,7 x 1,3 x 1,4 m Application: Grinding of linear surfaces for shearing knives and div. tools. Grinding support: -Vertical adjustment travel 45mm hand crank. -speed 2840 rpm -rotate 20° right/left -swivel 40° back and forth table: -with stop bar 730mm -equipped with 2x clamps / 2x fences -grinding depth by manual adjustment 80mm -mechanical feed, adjustment travel approx. 0.3 mm/double stroke -swivel 5° - 25° via hand toggle Hjdpfx Asu Ngk Tenvenn -1x chucking groove centered accessories: Box with div. grinding wheels *

Condition: good (used), Year of construction: 1973, machine/vehicle number: 73040, Embossing press Baier GEBA 1/F, installation height 90 mm, pressure capacity 800 kg, working size 10cm x 14 cm, built in 1973, machine number 73040, in good condition, immediately available If you are interested, we would be happy to inform you about other machines in our company. Hsdpfxovt Rpqs Anvenn You are welcome to view the machine in our company by prior appointment.

Condition: used, Turning steel grinding machine of the company Gebr. Bayer Hjdpog Tvn Ssfx Anvsnn Data: 

 Manufacturer: Bayer Bros. Type: DO25
 0,55kW 0,75 HP 2800 rpm

Year of construction: 1975, condition: good (used), machine/vehicle number: 12148, 2 hydraulic units Standing oil container with a hydraulic pump immersed in it and a flanged motor as well as 2 control blocks each with connection hoses Hydraulic pump: Maximum pressure: 55 bar Speed: 1500 rpm Hydraulic oil content approx .: 100 l Hnsdpfx Asghba Nenvsn

Condition: used, Antike Fadenheftmaschine / Antique Sewing machine Gebr. Brehmer 39 Serial-No. 2742 Wunderschön verarbeitete antike Fadenheftmaschine  Hnsdpfowtw Dgjx Anvjn Beautifully crafted antique Sewing machine Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 Hnodpfx Anedzzhxoven -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg

Condition: excellent (used), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest-Type Apparatus Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: Hnedpfxew Tbdpj Anven For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type unit designed for conducting condensation water tests. Ideally suited for laboratories, quality control, or industrial applications. Technical Specifications & Features: Model Variant: Constacon K 1000 M-TR – Condensation Water Unit without Ventilation Chamber volume: approx. 1000 liters Operation mode: Manual (Type M-TR) External dimensions (W x D x H): 2600 × 1120 × 1210 mm Internal chamber dimensions (W x D x H): 1535–1425 × 800–780 × 660–650 mm Testing standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Control: Simple manual control panel – parameters such as temperature and operation mode are set directly on the device. Temperature regulation: PID controlled, typical setpoints: Condensation tests: approx. 40 °C (up to max. 50 °C) Heating time: approx. 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chest-mounted units with a 1000-liter test chamber volume for salt spray testing. Constamatic® TR This series includes automatically controlled chest-mounted units of type A-TR. The internal controls are operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical specifications: Device type: S 1000 A-TR External housing dimensions: (W x D x H in mm) 2600 x 1120 x 1210 Internal test chamber dimensions: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. sample holder load: 10 kg / level 10 kg Hodpfxowf Dh Ns Anvenn Operating voltage: 230 V +6/-10% Power consumption S: 2700 W Humidity control range. S: up to / 70°C Test chamber control range K: up to / 50°C Test chamber control range S: up to / 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Overtemperature protection: yes Test chamber volume: 1000 liters Test solution storage capacity: approx. / 150 liters Test solution consumption per hour: approx. / 0.7 - 1.0 liters Water filling of base pan KON: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Liebisch KEA 300 Constanzo Functional condensate water test device for material and coating testing Description: This device is designed for performing condensate water or water vapor tests in accordance with common standards (e.g., DIN EN ISO 6270). It is ideal for testing the moisture and corrosion resistance of coatings, paints, metals, and plastics. The design is robust, low-maintenance, and perfectly suited for research, laboratory, and quality control applications. Technical specifications: Hjdpfoxlzm Tsx Anvsnn Manufacturer: LIEBISCH Model: KEA 300 Constanzo Nominal power: 1,400 W Chamber dimensions: approx. 500 × 450 × 500 mm (W × H × D) Voltage: 230 V / 50 Hz Chamber material: Stainless steel, corrosion-resistant Controls: None / manual operation Important notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data; specifications may be updated!) If you have any further questions, feel free to contact us by phone.

Condition: good (used), -KOM 1613- On offer here is a Gebr. Dickertmann hoist with a Demag chain hoist type PK2-F. Technical data chain hoist: Type: PK2-F Year of construction: 1968 With one load line: Load capacity (kg): 250 Main speed (m/min): 10 Fine stroke speed (m/min): 2.5 Hsdpfx Anevca Ubovsnn With two load lines: Load capacity (kg): 500 Main speed (m/min): 5 Fine stroke speed (m/min): 1.25

Condition: used, Gebr. Zaugg AG Snow Plough SP200-400-5 Snow Blade Width: 4000 mm Hedow Dwxxepfx Anvsnn Price: €3,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, French, Polish, and ????? Subject to typing errors, mistakes, and prior sale.

Year of construction: 1992, condition: good (used), Control system conversion 2022 to CYBELEC VisiTouch Pac pressure 200 t folding length 3050 mm column width 2550 mm Control system CYBELEC VisiTouch Pac ram stroke 524 mm Machine weight approx. 17.000 kg Equipment: - Control system conversion 2023 to CYBELEC VisiTouch Pac - controlled axes: Y1, Y2, X, R, crowning - hydraulic punch clamping - hydraulic die clamping - 4-stage pneumatic die displacement Hsdpsim R N Hsfx Anvenn

Condition: good (used), Year of construction: 1993, Pressure 150 t folding length 3550 mm column width 3050 mm Hnjdpfx Anjgz S S Sovon Control Cybelec DNC 880S stroke 700 mm throat 350 mm machine weight approx. 15.000 kg machine height 3.900 mm Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 pieces stop fingers

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, warranty duration: 18 months, input voltage: 240 V, measuring range X-axis: 250 mm, measuring range Z-axis: 320 mm, overall weight: 100 kg, feed length X-axis: 250 mm, feed length Z-axis: 320 mm, Equipment: type plate available, Modular extensible base basic Contour measuring system with down-direction Z-Scanning Anytime optionally via software updatable functions: - Up down measurement - Roughness measurement - Motorized Y-Supporting table - QR-Code Scanner (for tracingarms and reference files) - data export to QS-Stat (dfq file) - dominant waveness Hnsdpfx Asxgqlhenvjn Scope of supply: - Basic mechanics with integrated Y-adjustment table (17mm way) - Integrated control system - ConturoMatic Software; manual - PC W11/64Bit; 24"TFT flat screen; - Protective cover, sturdy and water repellent (material), Commodity-Code 63079098 Technical data: Measuring range 250mm Measuring range 320mm Resolution 1nm Sensing system optically incremental Inaccuracy +/-(0,9µm+L/100)µm* [L=mm] Measuring speed 0,1-3mm/s self-optimizing Positioning speed up to 25mm/s Gauging force regulation Table load 35kg Granite precision guides Weight 95kg

Condition: not inspected (used), Type: DO 25 - 0.55 kW - 2,800 rpm - 220/380 V Hnedjza Dk Espfx Anvjn

Condition: good (used), Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Mr: Simon Blank We offer you here a used shelf of the manufacturer SSI Schäfer for sale. Suitable for a rack depth of 400 mm Technical data of the shelf: Manufacturer: SSI Schäfer Type: R3000 Type designation: ZB341020 The scope of delivery includes: 01x shelf, used material colour: sendzimir galvanized length: approx. 994 mm Depth: approx. 390 mm Height: approx. 40 mm The shelves are used and may show slight show slight soiling, dents, scratches or similar. Our services at a glance: (prices on request) assembly, installation our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the Hnodpfx Aeg Snblenvon requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: Hardinge / Bridgeport (USA / UK) Hsdpsxqpruefx Anvenn Model: XP1000 Year of Manufacture: 2005 Reliable and efficient CNC vertical machining center designed for milling, drilling, and tapping a wide range of metal components. The Bridgeport XP series is renowned for its robust construction, high precision, and fast processing capabilities, making it ideal for both job shop and series production. Main technical specifications: (based on Hardinge Bridgeport XP1000 specification) Control: Heidenhain iTNC 530 Travel: X = 1020 mm / Y = 510 mm / Z = 635 mm Table size: 1200 × 520 mm Max. table load: 700 kg Spindle speed: up to 10,000 rpm Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 15 kW Machine weight: approx. 7,000 kg Power supply: 400 V / 50 Hz Cooling system: integrated Application: The Hardinge Bridgeport XP1000 is designed for precision metalworking—milling, drilling, tapping, and contour machining. Ideally suited for: - Tool, mold, and component manufacturing - Automotive, equipment, and industrial sectors - Situations requiring accuracy, reliability, and consistent performance If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2005, CNC Machining Center HARDINGE BRIDGEPORT XP610 (Year 2005) Condition: Good, technically sound. Manufacturer: Hardinge / Bridgeport (USA / UK) Model: XP610 Year of manufacture: 2005 A compact and reliable CNC vertical machining center designed for precise milling, drilling, and tapping of metal parts. The Bridgeport XP series is known for its high accuracy, robust construction, and reliable control system, making it an excellent solution for manufacturing processes where precision and repeatability are crucial. Main technical specifications: (according to Hardinge Bridgeport XP610 model specifications) Control system: Heidenhain iTNC 530 Travel (X / Y / Z): 610 × 510 × 510 mm Table size: 800 × 520 mm Max. table load: 500 kg Spindle speed: up to 10,000 rpm Hnjdpfjxqp Ensx Anvon Spindle taper: BT40 Tool changer: 20 positions (automatic) Spindle motor: 11–15 kW Cooling: integrated coolant system Power supply: 400 V / 50 Hz Machine weight: approx. 6,000 kg Application: The Hardinge Bridgeport XP610 is designed for precision machining of components and parts: - Metal, aluminum, copper, and brass workpieces - Tool and die manufacturing - Production of mechanical components and industrial parts Suitable for both small batch and series production where a precise, stable, and repeatable result is required. If you have any further questions, please feel free to contact us.

Condition: ready for operation (used), Koller Roller Mill,Roller mill, Roller Pan mill, Pan mill,Pan mixer, Used Machinery Model: Gebrüder Netzsch 205 ST; 251283 Dimensions: 1400 x 1300 mm Weight: 735 kg Year: 1965 Electrical Data: 400 V; 50 Hz; 4/2.9 A Stone Size: 500 x 150 mm Koller mills are designed to ensure excellent grinding quality for all industrial applications. Whether it’s for minerals, cereals, or food products, Koller mills provide reliability and durability. Choose Koller mills to experience outstanding performance and long-lasting reliability! Hnsdpfsuh Rkxex Anvon

Condition: used, container length: 14,400 ft, color: black, Equipment: bathroom, hot water, lighting, shower, We are selling our used office container, which is insulated and equipped with a toilet/shower and a kitchen. Hodpfx Anozcv Rcsvonn (Without air conditioning) Individual dimensions: approximately 6000x2400x2600mm (LxWxH), quantity: 6 units. Total length: 14400x6000 (LxW) Inspection is possible by prior arrangement. Collection only.