Used High Performance Drills for sale (26,404)

Condition: used, High-performance drilling machine ALZMETALL, type Abomat 20 Production drilling machine Serial No. 452, Year of manufacture 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Credpfxeikrtqo Abzjf Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Distance from spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, infinitely variable Drill slide feed: 20 - 224 mm/min, infinitely variable Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Mains connection: 400 volts, 50 Hz - Spindle speed infinitely variable via frequency inverter - Drill slide feed infinitely variable via frequency inverter - 2 operating modes: setup and automatic operation - Central lubrication - Control cabinet on the back of the machine - Swiveling control panel - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Credpfst Uzk Rjx Abzof Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Technical data: Drilling capacity in steel: 50 mm Tapping capacity: M33 face milling cutter: 100 mm end mill: 25 mm spindle: MK 4 throat depth: 340 mm Speeds: (6) 50 - 1510 1/min quill stroke: 200 mm quill feed: 0,1 / 0,2 / 0,3 / 0,4 mm/rev table size: 820 x 240 mm Crodpfx Aepxmlqebzef traverse path X: 460 mm traverse path Y: 280 mm column diameter: 180 mm Number of T-slots: 4 T-slot size: 16 x 26 mm motor power: 3 kW Weight, approx.: 750 kg Equipment: - Cross table - thread tightening spindle - Thread cutting device - Automatic spindle feed - LED machine light - Rotatable table - Manual fine feed - Coolant device - Height adjustable protective cover - Limit switch protected spindle

Condition: used, High-performance drilling machine, ALZMETALL, Type Abomat 20 Production drilling machine Serial No. 449, Year of manufacture 1995 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle mount: SK 40 - M16 Overhang: 280 mm Drill slide stroke: 500 mm Spindle distance, max.: 685 Spindle distance, min.: 185 Table size: 490 x 400 mm Spindle speed: 2000 rpm Automatic feed: 224 mm/min Rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drilling spindle motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Production drilling machine with a spindle speed and a feed rate - Current spindle speed: 2000 rpm - Current feed rate: 224 mm/min - 2 operating modes: manual and automatic operation - Electric drill head height adjustment - Central lubrication Crsdpegd Ipkefx Abzjf - Control cabinet on the back of the machine - Mounted on a steel plate (700 x 650 x 40 mm) with precise height adjustment Space requirement L x W x H: 1200 x 700 x 2530 mm Weight: approx. 900 kg Good condition

Condition: excellent (used), Normal drilling capacity 20 mm Continuous drilling capacity in St 60-2 / E 335 18 mm Spindle mount MK 2 10 spindle speeds 240 - 3800 rpm Drilling depth 100 mm Overhang 215 mm Distance spindle/table up to 360 mm Distance spindle/baseplate 560 mm Table surface 350 x 290 mm Column diameter 75 mm Motor with pole change 0.6/1.2 kW Overall height 1050 mm Weight 100 kg Current new price: €4,022.00 net Cedpfjfzbkhsx Abzsrf Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW Cedpjy En I Hofx Abzsrf - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Year of construction: 1992, condition: good (used), machine/vehicle number: 144202, Technical data: - Drilling capacity in steel ST 60: 32 mm - Thread cutting capability up to: M 20 - Drill spindle mount: MK 3 - Feed rates: 0.1 + 0.2 + 0.3 mm/rev - Drill spindle stroke: 150 mm Csdpfx Abegbykrszsrf - 12 drill spindle speeds: 80 - 1400 rpm - Overhang: 280 mm - Max. distance table - drill spindle: 760 mm - Table with 2 T-slots: 550 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.4 / 2.3 kW - Space requirement: approx. W 550 x H 1950 x D 850 mm - Weight: approx. 360 kg - Includes: - Coolant system - Quick-change drill chuck - 20 pcs. HSS various drills, 8 - 25 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3815-130-3235, Offer 25380 Technical Data: - Drilling capacity in steel ST 60: 40 mm Crjdpfx Ajxr Ayhjbzof - Maximum drilling capacity in steel ST 60: 50 mm - Tapping capacity in steel ST 60: up to M 42 - Spindle taper: MK 4 - Spindle stroke: 200 mm - Spindle speeds steplessly adjustable: 40 – 1100 rpm - Right and left-hand rotation - 3 automatic feeds: 0.1; 0.16; 0.25 mm/rev - Throat depth: 350 mm - Max. distance spindle – table / baseplate: 790 / 1210 mm - Table with 2 T-slots: 630 x 540 mm - Table height adjustable via rack with hand crank - Drive: 400 V / 1.6 / 2.9 kW - Required floor space approx.: W 600 x H 2050 x D 980 mm - Weight approx.: 650 kg - Includes: - Tapping device - Quick-action drill chuck 1–13 mm - Emergency stop button - Work light - Coolant device

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60: 35 mm - Drilling capacity in steel ST 60: 40 mm - Drill spindle connection: MK 4 Crodpfjkt Nqqex Abzof - Drill spindle stroke: 170 mm - Overhang: 345 mm - Rotary table with 2 T-slots: 550 mm - Max. distance table – drill spindle: 650 mm - Max. distance base plate – drill spindle: 1000 mm - Feeds: 0.09 - 0.16 - 0.28 mm/rev - Variable speed AZ gearbox with gear shift - Continuously adjustable drill spindle speeds: 40 - 720 rpm - Right/left rotation - Drive: 400 V / 2.5 kW - Lighting - Coolant system - Space requirement: approx. W 750 x H 1950 x D 1000 mm - Weight: approx. 700 kg

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm Codpst Etiyjfx Abzsrf - Stage 2 210 - 765 rpm - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Year of construction: 1995, machine/vehicle number: 953003, Order No. 25072 Technical Specifications: Codpsv Uy Npefx Abzorf - Drilling capacity in steel ST 60: 40 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 150 mm - Drill spindle speed: infinitely variable rpm - Throat depth: 350 mm - Max. distance between drill spindle and table: 580 mm - Table with 2 T-slots: 600 x 450 mm - Height adjustable via gear rack and hand crank - Table tiltable left and right - Drive: 400 V / 3 kW - Space required: approx. W 700 x H 1950 x D 950 mm - Weight: approx. 650 kg - With: - Machine vise - Keyless drill chuck: 1-13 mm - Lighting

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling diameter in steel ST 60: 32 mm - Drill spindle mount: MK 3 - Right/left rotation - Drill spindle stroke: 150 mm - Drill spindle speeds, stepless: 80 - 1170 rpm - 2 feed rates: 0.1 / 0.2 mm/rev - Overhang: 290 mm - Max. distance table - drill spindle: 780 mm - Table with 2 T-slots: 480 x 400 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement, approx.: W 600 x H 2100 x D 900 mm - Weight, approx.: 420 kg - Includes: Cjdodkx Anspfx Abzerf - Coolant system - Quick-change drill chuck 1-13 - Lighting

Condition: good (used), Year of construction: 2021, REF: MM6468 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Crsdpfezn Rbfjx Abzjf Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Machine weight - 390 kg.

Condition: excellent (used), Year of construction: 2008, Manufacturer: KALTENBACH Type: KBC 350 NA Year of production: 2008 Dimensions (WxHxD): approx. 220x200x150 cm, with chip conveyor, 3 roller conveyors Dimensions: (WxHxD): approx. 220x80x60 cm, 2 of them with storage table. We also offer: 1. Kaltenbach KMR 100 AP 2008 (304096) Crsdpfx Abjt Ia Syozof 2. Kaltenbach KBC 350 NA 2008 (304133) 3. Kasto SSB 260 VA-CNC 2002 (6510 115 305) 4. Kasto SBA 280 AU 1998 (6406 102 056) 5th Kasto HBA 420 AU 1985 6th Kasto HBA 420 AU 1995 (6019 107 306) 7th Kasto HBA 420 AU 1995 (6019 159 107) 8th Kasto, type SSB 260 VA, year of construction 1994

Condition: used, Year of construction: 2000, functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,050 mm, feed length Z-axis: 200 mm, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and Travel Ranges Tool holder: SK 40 Table dimensions: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance: - Spindle bottom edge: min. mm 140 - Table top edge: max. mm 740 Boring radius: - min. mm 540 - max. mm 1590 Travel range U-axis: mm 2600 Travel range Y-axis: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling performance in solid material: - St 60: mm 40 - GG 22: mm 50 Thread cutting: - St 60: M 36 - GG 22: M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque: Nm max. 250 Constant from: min-1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Cjdpfxoy Ttrto Abzerf Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min 7.5 / 3 Feed rates, infinitely variable: mm/min 5 - 2000 Feed force: N 12000 Accuracy Positional accuracy X, Y axis at 1200 mm: mm ± 0.075 Repeatability X, Y axis: mm ± 0.03 Positional accuracy Z axis: mm ± 0.05 Repeatability Z axis: mm ± 0.03 Positional accuracy W axis: mm ± 0.05 Repeatability W axis: mm ± 0.03 Electrical data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen, backlit, easily readable from all sides Position data: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining cycles: Cycles for centering, drilling, threading, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible in each cycle Chip breaking / chip removal: possible in drilling cycle Drilling patterns: Hole pattern, hole circle, matrix Basic software: Programming in dialog mode, 38 zero-point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning cast and sintered parts - Angle detection for round parts by probing the reference edges or surfaces Data interfaces Paint finish with signs of use Standard paint finish, two-component textured paint Machine upper part: light grey RAL 7035 Machine lower part: light blue RAL 5012 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test report for mechanics, electrical system and safety devices

Condition: used, Year of construction: 2018, Manufacturer: ONI, Model: TCW90 Plus, Year of manufacture: 2018, Serial No. 18026, Heating capacity: 18 kW, Cooling capacity: 164 kW, MC control system Crjdjzn Anqepfx Abzof +++ Attention: This unit is part of an online auction! +++

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Credezpb Eqopfx Abzof

Condition: good (used), functionality: fully functional, High-performance band saw / HIGH SPEED FRAME SAW EWD HDN 600 TECHNICAL DATA: Well-maintained, high-performance band saw Frame width: 710 x 735 mm Stroke: 600 mm Speed: 310 rpm Fully hydraulic with automatic overhang adjustment Cedpfx Abozfwl Eozsrf Hydraulic saw tensioner and saw chuck Drive motor and gearbox Electrical control cabinet with control system Splitting wedge, type AVER, with hydraulic drive In very good condition, (complete overhaul available upon request!) Excellent condition with remotely controlled clamping carriage and 1 band saw EWD LSH as well as one band saw EWD GDZGE 600 in stock!

Condition: like new (used), Year of construction: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focus system for extended depth of field • Continuous, blink-free white illumination Cedpswbg Drsfx Abzjrf • Region-of-interest windowing for higher frame rates • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabyte Ethernet and SyncNet high-speed connectivity • PackTrack feature for closer item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic's patented "Green Spot" technology for visual good confirmation • Dual laser targeting for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and Tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50°C Communication Interfaces: 2 Ethernet TCP/IP, 2 serial ports, Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, 32 frames per second image capture, dynamic or adjustable focus, and various lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 10019781, total length: 894 mm, total height: 1,746 mm, total width: 650 mm, overall weight: 330 kg, type of input current: three-phase, input voltage: 400 V, Like-new, high-performance circular saw machine from Berhinger Eisele. Max. 10 operating hours. Designed to accommodate saw blades up to 350 mm in diameter. Min./max. cutting range at: 90° 45° Round (in mm) 10 / 120 10 / 120 Square (in mm) 8 / 100 8 / 100 Crsdpszrlnuefx Abzef Rectangle (in mm) 8 x 8 / 170 x 100 8 x 8 / 120 x 100 With continuously adjustable hydro-pneumatic feed, pneumatic maintenance unit, pole-changeable three-phase motor, 400 V, 50 Hz, 1.4/1.9 kW, including automatic clamping device to the left and right of the saw blade, stationary base with integrated coolant system and chip drawer, material support height 900 mm. Operating pressure of 6–8 bar required. Machine design complies with CE standards. Saw machine is designed for a voltage supply of 400 V / 50 Hz (3LNPE400V/50Hz). With continuously adjustable hydro-pneumatic feed, automatic clamping device to the left and right of the saw blade, pneumatic maintenance unit, pole-changeable three-phase motor, 400 V, 50 Hz, 1.4 / 1.9 kW. With additional gearbox for 4 speeds: 10/20/40/80 RPM. With clamping pressure reduction. With micro-spray system with coolant system, i.e. spraying or cooling can be selected. Incl. electrical equipment according to VDE 0.113 and CE compliant, ready for operation. Incl. initial equipment package for steel, consisting of: 1 pc Saw blade HSS 350x3.0x40 Z = 280 ZT04 1 pc Saw blade HSS 350x3.0x40 Z = 180 ZT 06 1 pc Saw blade HSS 350x3.0x40 Z = 110 ZT10

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty Credpfxswnn S Rj Abzof New paint RAL 7035/7031

Condition: good (used), Year of construction: 2005, Professional and high-performance strapping machine from a renowned German manufacturer with frame internal dimensions of approximately 500 mm wide x 400 mm high, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system, as well as a quick-change system for strap coils. Crsdpfx Abezq Ekyszsf -Up to approximately 50 straps per minute. -Strap dispensing triggered by a robust foot pedal. -Strap tension continuously adjustable. -Soft tensioning possible. -Automatic strap loop ejection when strap dispensing is triggered without packaging material. -Wear-resistant strap guides with a quick-change system. -Can be moved using foot rollers. -Documentation consisting of operating manual, parts lists, and wiring diagrams. The machine can be demonstrated while powered on.

Condition: excellent (used), Year of construction: 1993, wire diameter range: 2,4 - 3,8 mm nail length: 50 - 90 mm output: 820 nails/min Crsdpfxsd Ez Ero Abzef

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Crodpfx Abov If T Tozof Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” Cjdpfx Abozpfy Sjzjrf -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.