Used High Pressure Casting Machine for sale (79,639)

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Bedpfx Akorhidmotjlp Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 6234-3, drilling capacity: 40 mm, total length: 3,490 mm, quill stroke: 200 mm, total height: 2,950 mm, total width: 1,800 mm, table length: 1,800 mm, spindle speed (max.): 2,800 rpm, table width: 600 mm, type of input current: AC, overall weight: 2,900 kg, column diameter: 195 mm, input voltage: 400 V, input frequency: 50 Hz, distance table to spindle center: 705 mm, spindle motor power: 5 W, table height: 900 mm, distance table center to spindle nose: 95 mm, input current: 25 A, • Work table 1800 x 600 mm with 4T slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • CE marking • Includes attachments as shown in the photo Bjdpfsz R Rv Rjx Aktslp

Condition: good (used), Year of construction: 2016, machine/vehicle number: 160409, Offer 26217 Technical specifications: Blsdpsz Arnijfx Aktep - Drilling capacity in full steel ST 60: 40 mm - Thread cutting ST 60: M 30 - Drill spindle connection: MK 4 - Quill stroke: 200 mm - Drill spindle speeds, stepless: 50 - 2000 rpm - Drilling feed rates: 0.08 - 0.50 mm/rev - Height adjustment of the drill column: 380 mm - Overhang: 950 mm - Travel of the upper slide: 590 mm - Table size: 1200 x 500 mm - Drive: 400 V / 4.5 kW - Space required (approx.): W 1200 x H 2400 x D 1700 mm - Weight (approx.): 2700 kg - Includes: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots, vertical, on the left side of the machine - Various accessories

Condition: excellent (used), Year of construction: 2008, Stationary high-pressure pump unit Hammelmann HDP 127 on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 127 Operating pressure: 600 bar Flow rate: 66 l/min Drive speed: 1500 rpm Drive power: 74 kW with SCHORCH KA7280S-BB01B-Z 3~ IP55 75kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,700 x 1,000 x 1,300 mm Weight: approx. 1,300 kg Year of manufacture: 2008 Bedoh Uc Iuepfx Aktolp Condition: In very good used condition.

Condition: used, functionality: fully functional, USED MILLING MACHINE WITH HIGH-SPEED HEAD FIRST ISO30. WITH HOOK/PNEUMATIC RELEASE SCREWDRIVER AND AUTOMATIC GUIDE LUBRICATION SYSTEM. Bledpfx Akezht Nletjp

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60: 35 mm - Drilling capacity in steel ST 60: 40 mm - Drill spindle connection: MK 4 - Drill spindle stroke: 170 mm - Overhang: 345 mm - Rotary table with 2 T-slots: 550 mm - Max. distance table – drill spindle: 650 mm - Max. distance base plate – drill spindle: 1000 mm - Feeds: 0.09 - 0.16 - 0.28 mm/rev Bjdpfx Askt Nqqjktslp - Variable speed AZ gearbox with gear shift - Continuously adjustable drill spindle speeds: 40 - 720 rpm - Right/left rotation - Drive: 400 V / 2.5 kW - Lighting - Coolant system - Space requirement: approx. W 750 x H 1950 x D 1000 mm - Weight: approx. 700 kg

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW Blsdjzwftzjpfx Aktsp - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high-pressure pump unit Hammelmann HDP 112, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 112 Operating pressure: 300 bar Flow rate: 153 l/min Drive speed: 1500 rpm Drive power: 90 kW with VEM motor 90 kW, 3-phase, IP55 with pressure regulating valve with safety valve with oil cooling system Dimensions L x W x H: approx. 2300 x 1000 x 1400 mm Bodpohtnnisfx Aktslp Weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Condition: excellent (used), Year of construction: 2011, operating hours: 5,303 h, functionality: fully functional, machine/vehicle number: 5847, travel distance X-axis: 600 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 42,000 rpm, spindle speed (min.): 5 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 550 mm, table length: 450 mm, type of input current: three-phase, table load: 350 kg, overall weight: 5,500 kg, workpiece weight (max.): 350 kg, input frequency: 50 Hz, controller manufacturer: Heidenhain, controller model: TNCi530i, operating hours of spindle: 5,303 h, Equipment: documentation/manual, rotational speed infinitely variable, High-Speed Milling Machine HSC500/3 HSC500 - 3 Axis Annual maintenance Spindle operating hours HVC140: 5303h Travel range X/Y/Z: 700/590x580x360 mm Actual machining area: 580x530 mm Table area: 550x450 mm Workpiece weight: 350 kg Bsdpsy R U Azofx Aktjlp Distance table to spindle nose: 160/520 mm Machine dimensions (W x D x H): 3200x2250x3000 mm Rapid traverse: 30 m/min Equipment: Heidenhain iTNC530i control Prepared for dust extraction Tool changer with 60 stations, HSK40 (Minimum quantity lubrication) Adjustable air nozzle Tool length measurement with Blum laser Workpiece measurement with Renishaw OMP-400 touch probe Additional lighting Electronic handwheel with enabling switch Milling spindle: Steptec HVC140-15/42 42,000 rpm, 5303 operating hours MMS Lubtools 3 kW cooling system Loading door at rear of machine Length compensation, temperature compensation for accuracy package Warranty: 3 months (milling spindle excluded) Transport, commissioning, training Options on request

Year of construction: 1988, condition: used, Offered is a high-frequency welding press with film feed. Equipped with: press unit, hydraulic power unit with electric motor, control panel with switches and indicator lights, worktable with film guide, side-mounted roll holders, film unwinding unit and separate electrical cabinet. Inspection possible by appointment. Bodpfo Adt Eiex Aktolp

Condition: ready for operation (used), A high-pressure pump BFT with Rexroth and VEM components is available. Pressure: approx. 4000bar, motor power: approx. 37kW. An on-site inspection is possible. Bedoxxa T Eopfx Aktelp

Condition: good (used), Year of construction: 2009, machine/vehicle number: HD 10906347, pressure: 350 bar, overall weight: 850 kg, rotational speed (max.): 1,500 rpm, power: 35 kW (47.59 HP), Equipment: type plate available, Used high pressure pump. Technical specifications: Year of manufacture: 2009 Type: RS716E/350 Serial number: HD 10906347 35 kW 350 bar 1500 1/min 47 l/min With Küenle KDGN 225S4 NV 400 / 690V 67.2 / 39A 50Hz 37kW 1475 1/min Bjdpfxotuqmko Aktolp Condition: used (see pictures and nameplates) Scope of delivery: 1 pump

Year of construction: 2013, condition: excellent (used), machine/vehicle number: B3.00122.2279, Stationary high-pressure pump unit, Hammelmann HDP 122, mounted on a base frame. Similar to, but not a Kamat, Uraca, or Woma. Pump type: HDP 122 Operating pressure: 440 bar Flow rate: 92 l/min Drive speed: 1500 rpm Drive power: 75 kW Bedpohf Ixmsfx Aktslp with AC motor ACM 208S 75 kW, electric motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. Dimensions L x W x H: approx. 1,800 x 900 x 1,450 mm Weight: approx. 1,230 kg Year of manufacture: 2015 Condition: in very good used condition.

Condition: repair required (used), Year of construction: 2001, functionality: not functional, FRECH DAK 720-71 RC Die-Casting Machine, used Machine number 440403, clamping force 8,000 kN, clamping stroke 825 mm, ejection force 364 kN, ejection stroke 180 mm, mould height 350 to 1,000 mm, clamping platens 1,300 x 1,300 mm, tie bar spacing 825 mm, tie bar diameter 180 mm, maximum casting force 713 kN, casting stroke 600 mm, casting piston diameter 70 to 120 mm, casting volume 1,539 to 4,523 cm³, operating pressure 160 bar, drive motor 45 kW, equipped with MELTEC AVDF 1200/5000 dosing furnace, year 2017, serial number System sold as a donor for spare parts Technical details: Dimensions (L x W x H): approx. 8,000 x 7,500 x 3,500 mm Weight: approx. 36,000 kg Year of manufacture: 2001 Bedpfx Akjwc Tdzotjlp

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Blsdpfx Akoyuty Setep Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Bljdpfx Aozuarmjktsp Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 1-13 mm arm length: 100 mm workpiece height max.: 400 mm Bodpfjz Hfl Tex Aktslp total power requirement: 3 kW dimensions of the machine ca.: 2.0 x 1,2 x 2,2 m bore spindle turning speed range: 0-3000 U/min boring spindle drive: 2,2 kW max. Y-axis travel: 550 mm max. Z-axis travel: 300 mm The machine has a 2.2 kW spindle motor with a 2-stage gearbox for drilling and tapping. Table size is 100 x 50 cm Stroke length approx. 200 mm *

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head Bledozpfy Sjpfx Aktop -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted.

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank Blodpofdkb Ejfx Aktep  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: like new (used), functionality: fully functional, power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Bjdeym Atrjpfx Aktelp Manufacturer: Bauerrichter Model: PM 88 This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing! Motor approx. 3 kW, 230/400V Polishing shaft height / working height approx. 900 mm Polishing ring diameter max. 450 mm Usable polishing width 140 mm Storage table for e.g. polishing agents, tools... approx. 350 x 350 mm Execution - Stable, welded steel construction with mounting flange for floor fastening - One continuous polishing shaft, with polishing rings mounted on both right and left sides - Integrated storage table for polishing materials - Cover/protective hoods over the polishing rings Dimensions approx. 1600 x 1000 x 1200 mm (LxWxH) Weight approx. 400 kg Including brand-new pleated polishing mop set

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Bedpfsvylh Uex Aktelp Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Bodpfx Aexw T Ugoktjlp Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: used, final pressure: 1,400 bar, pressure: 1,400 bar, Good working high pressure pump with 20mm plungers 1400 bar 35 ltr/min Bsdpfxov Suhzj Aktolp IL 375 TF375H

Condition: good (used), Year of construction: 2008, Professional, compact, and high-performance strapping machine from a renowned European manufacturer with internal frame dimensions of approximately width 650 x height 500 mm, designed for high speed and trouble-free operation. Equipped with an ergonomic and straightforward threading system as well as a quick-change coil system. -Up to 70 strappings per minute. Bjdpfjy Akphjx Aktelp -Strap tension adjustable. -Soft tension possible. -Automatic strap feed. -Strapping activation possible from both sides (optionally from the front or rear of the machine) via foot pedals. Alternatively, automatic strapping activation via sensor in the tabletop is possible. -Wear-free strap guides with quick-change system. -Machine can be moved and locked using castors. -Documentation includes operator’s manual, spare parts lists, and wiring diagrams. The machine can be demonstrated under power.

Condition: good (used), Year of construction: 1979, functionality: fully functional, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Bjdpfjz Ad Rcex Aktolp Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm