Used High Pressure Compressor for sale (32,533)

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Lhedpjfzrapefx Akmon The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: for Ø 40 mm shaft -for gland tape Lhodjdfgk Tepfx Akmsn -conical socket suitable for high pressure -Number: 1x glands available -Price: per piece -Dimensions: 160/160/H103 mm -Weight: 3 kg

Condition: like new (used), Woma 150Z P16 Ljdpfx Akjd Hny Asmehn 2000 bar at 20 ltr/min at 1800 rpm

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift pockets, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/200 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW Salmon 75/150 | 75 l/min at 150 bar | Engine: Vanguard 35 HP 26 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Vanguard 35 HP 26 kW Salmon 45/240 | 60 l/min at 200 bar | Engine: Vanguard 35 HP 26 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 760 x 1,250 x 1,200 mm Dimensions with 400 l water tank (L x W x H): approx. 1,220 x 1,250 x 1,200 mm Dimensions with 800 l water tank (L x W x H): approx. 1,670 x 1,250 x 1,200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400 l water tank: approx. 320 kg Empty weight with 800 l water tank: approx. 350 kg HIGH-PRESSURE PUMP:  Manufacturer: HPP  Model: CLW ENGINE:  Manufacturer: Vanguard  Model: 35 HP  Fuel: Gasoline  Max. Output: 35 hp (26 kW) CONTROL PANEL:  Start button  Operating hour counter  Electronic fuel gauge  LED display for oil temperature  LED display for low lubricating oil pressure  LED display for clogged air filter  LED display for engine speed  LED display for generator  LED display for spark plugs  Emergency stop button ELECTRICAL CONTROL:  Winding/unwinding of hydraulic hose reel;  On/Off bypass;  Engine speed control +/-;  Emergency stop button;  Switching to wireless remote control; INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shut-off function. Ljdpfx Aksf Arugjmehn SAFETY AND PRESSURE REGULATING VALVES:  The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: Electric hose reel  Material: Stainless steel  Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose  Hose: 80 m ½“ high-pressure hose (included)  Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER:  With washable cartridge and drain valve.  Filtration degree: 50 Mesh INCLUDED IN DELIVERY:  Multi-function wireless remote control IMET; - On/Off motor; - On/Off bypass; - Engine speed control +/-; - Winding/unwinding of hydraulic hose reel; - Emergency stop button;  Battery charger for wireless remote control;  300, 400, 500 or 800 l (with steel frame) water tank made of polyethylene; OPTIONAL ON REQUEST:  Pulsation/booster pump;  50 or 60 m ½“ high-pressure hose;  50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Version with 2 HD hose reels;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request.

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland. Lhodpfeq Ru Amsx Akmen

Year of construction: 2010, condition: as good as new (ex-display), Woma 1002 P35 High Pressure Pump in New Condition 300 bar - 84 ltr/min - 1500 rpm Lhsdpfxof Dybze Akmen 300 bar - 101 ltr/min - 1800 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. HIGH-PRESSURE PUMP HT SERVO-JET4000 A well thought-out principle with great effect. + Up to 40 % energy savings compared to conventional systems, Investment eligible for subsidies + High energy efficiency: servo direct drive, no reactive current, low and and flexible power consumption + Low connected load required: no power consumption when the WSS system is at a standstill of the WSS system, suitable for companies with low energy supply + 3-piston plunger pump: high liter capacity and high efficiency of up to 98 %, replaces 6000 bar technology, long maintenance intervals, simple design, no hydraulic system, no warm-up and start-up phase - ready to start immediately + Permanent pressure control and integrated pulsation damping: Continuous readjustment of the cutting pressure to the set value - no pressure fluctuations, higher cutting speed than with a pressure intensifier in a comparable combination Lhedpju Hz Tqjfx Akmsn + Lowest noise level of 75 dB: high-quality complete unit with soundproof housing + Can be used universally for all waterjet machines and brands

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump Lhsdef S Nchspfx Akmon -Manufacturer: KSB, Movichrom high pressure pump - G 3/5 PN25 G2 -Drive: 0.75 kW -Speed: 2810 rpm -max. delivery rate: 3 m³/h -max. head: 33 m -Dimensions: 220/250/H580 mm -Weight: 34 kg

Condition: used, Hydraulic machine vise, high-pressure clamping device KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guide rail height: 140 mm - 2 clamping ranges adjustable via pins - Rotating plate Dimensions L x W x H: 900 x 400 x 210 mm Lhedsd Amwijpfx Akmjn Weight: 125 kg Good condition

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h Lhodpfsb A Ni Njx Akmen -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.75 kW 2810 rpm -Max. flow rate: 9.0 m³/h -Max. pressure: 18 mWS Ljdpfxjcxq Ato Akmohn -Quantity: 1 available -Dimensions: 380/225/H565 mm -Weight: 36 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Lhodpfxow Rd Avo Akmen Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Technical specifications: Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: good (used), Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump Lhedpfx Akef S Ncpjmen -Manufacturer: KSB, inline pump MOVI -V 25/1Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: m³/h -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in cleaning unit on hot-dip galvanized and painted high-quality steel frame with forklift attachments, suitable for installation in service vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Whale 30/250 | 30 l/min. at 250 bar | Engine: Honda GX630 14.7 kW Whale 36/210 | 36 l/min. at 210 bar | Engine: Honda GX630 14.7 kW Whale 43/180 | 43 l/min. at 180 bar | Engine: Honda GX630 14.7 kW Whale 55/160 | 55 l/min. at 160 bar | Engine: Honda GX690 17.7 kW DIMENSIONS / WEIGHT: Dimensions without water tank (L x W x H): approx. 650 x 1,000 x 1,030 mm Empty weight without water tank: approx. 250 kg Dimensions and empty weight with 300 l water tank: approx. 1,160 x 1,000 x 1,030 mm and approx. 280 kg Dimensions and empty weight with 500 l water tank: approx. 1,260 x 1,000 x 1,030 mm and approx. 300 kg HIGH-PRESSURE PUMP:  Manufacturer: COMET  Model: TW 13022S Premium ENGINE:  Manufacturer: Honda  Model: GX 690  Fuel: Gasoline  Cooling: Air  Cylinders: 2  Displacement: 688 cm³  Max. Power: 24 hp (17.7 kW)  Max. Engine Speed: 3,600 rpm TRANSMISSION: Gearbox housing CONTROL PANEL:  Ignition key  Operating hour counter  Electronic fuel gauge  LED indicator for low lubricating oil pressure  Emergency stop button INSTALLED ALARM:  Water shortage protection against dry running of the high-pressure pump with automatic shutdown function. SAFETY AND PRESSURE RELIEF VALVES:  The unit is equipped with a safety valve, a pressure relief valve and a pressure gauge. HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 60 m ½“ high-pressure hose  Hose: 50 m ½“ high-pressure hose (Included) LOW-PRESSURE WATER FEED HOSE REEL:  Type: manual hose reel  Material: Stainless steel  Capacity: max. 35 m ¾“ low-pressure hose  Hose: 35 m ¾“ low-pressure hose (Included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration rating: 50 Mesh INCLUDED IN DELIVERY:  Multifunctional radio remote control IMET; - Engine on / off; - Bypass on / off; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  300, 400 or 500 l water tank made of polyethylene; OPTIONAL (UPON REQUEST):  60 m ½“ high-pressure hose;  Pulsation/booster pump;  2nd high-pressure hose reel  Electric high-pressure hose reel (connection to the vehicle battery required) ACCESSORIES (UPON REQUEST):  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint and quick coupling;  High-pressure lance kit with flat spray nozzle 15° / rotating nozzle;  Lance kit for high flow rate; Ljdpfsdqmttex Akmehn  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispensing kit;  Step cleaning device;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories upon request

Condition: used, High-pressure hydraulic power unit up to 630 bar, WEBER Type E45 / 59600.0 High-pressure unit + hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic power unit, Type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader – jaws, WEBER Type SP30 / 59 198.0 Outreach = arm length 340 mm Spreading distance max. 610 mm Spreading force in the working area max. 132 kN Closing force 99 kN - Double hose with plug-in connection Ljdpfx Akjdzp S Rsmohn Rated power 0.9 kW Mains connection 220 volts, 50 Hz Weight of hydraulic power unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Hydraulic fire and rescue set with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. It can also be used to compress or lift loads. Versatile due to the multifunctional spreader jaws made of die-forged and hardened steel.

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Lhsdpfx Aod Tk Sqekmjn -Voltage: 380-415 V 690 W -Max. flow rate: 2 m³/h -max. H: 36/46 m -Max. pressure: 6 bar -Maximum temperature: 90 °C -Price: per piece -Quantity: 2 pieces -Dimensions: 400/143/H203 mm -Weight: 12.4 kg

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Ljdpfx Akeflpmqemehn The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,848 kg, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Lsdpewrrgmefx Akmjhn Frequency: 50 Hz Volume flow: 13.98 m³/min Speed: 4050 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 13 bar g Full load current: 159 A The CompAir screw compressor L75SR-13A is a reliable and powerful solution for compressed air supply in industrial applications. This model impresses with its robust design, high efficiency, and easy operation. It is specifically designed for continuous use and provides stable compressed air performance that meets the requirements of various businesses. Thanks to its compact design, the L75SR-13A can be flexibly integrated into a wide variety of systems and ensures smooth operation with minimal maintenance effort.

Year of construction: 1997, condition: ready for operation (used), machine/vehicle number: 41110, Nominal pressure: 110 bar at a given flow rate: 6 l/min Lhodpfx Aksd D U T Remjn Maximum inlet pressure: 12 bar Electrical connection: 230 V, 1.5

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar at intake capacity: 2.2 m³/min outlet nozzle diameter: 50 mm Lhodpfxedzw I Ns Akmon speed: 2780 rpm drive motor: 220/380 V, 0.95 kW space requirement: 510 x 350 x 480 mm

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. Lsdpjfz Ax Sjfx Akmohn High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 349029, overall weight: 2,010 kg, noise level: 69 dB, Equipment: type plate available, Voltage: 400V Phase: 3 Frequency: 50 Hz Flow rate: 14.72 m³/min Ljdpfx Akowrrn Demohn Speed: 3000 min⁻¹ Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 7.5 bar g Full load current: 169 A The CompAir screw compressor L80-7.5A is a reliable and efficient solution for compressed air supply in various industrial applications. With its robust design and modern technology, this model ensures stable and continuous compressed air supply that meets the high requirements for performance and reliability. The compressor is characterized by its easy operation, low energy consumption, and minimal maintenance, making it an economical choice.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Lhedsfz Dvvspfx Akmen

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: A34902974, Equipment: type plate available, Technical details: Voltage: 400V Phase: 3 Frequency: 50 Hz Lhsdpfx Aewrq Icekmon Volume flow: 12.44 m3/min Speed: 3000 rpm Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: Air Stage pressure: 10 bar g Full load current: 174.3 A The CompAir screw compressor L75-10A is a powerful and reliable solution for generating compressed air in industrial applications. With its robust design and modern technology, this compressor ensures stable and efficient compressed air supply that meets the high demands of various operations. Thanks to its compact design, the L75-10A can be easily integrated into a wide range of systems and provides long-lasting, reliable performance.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: A34904774, overall weight: 1,765 kg, Equipment: type plate available, Technical details: Voltage: 400 V Phase: 3 Frequency: 50 Hz Air flow rate: 12.44 m3/min Speed: 3000 min-1 Intake pressure: 1 bar Installed motor power: 75 kW Compression medium: air Stage pressure: 10 bar g Full load current: 169 A Lhedpfx Aowtfk Uekmjn The CompAir L75-10 A screw compressor is an efficient and reliable solution for compressed air supply in industrial applications. Thanks to its modern technology, it operates energy-efficiently and ensures stable compressed air performance. The compressor is equipped with integrated heat recovery, allowing the useful utilization of the waste heat and further reducing energy consumption.