High pressure fan

MÜLLER

Condition: new, Müller co-ax 5-PCS-2 15 NC valve with external drive, 24V DC, unused, 100% functional, scope of delivery as shown in the photos. Fodpfx Aoi Eb Tdodrsgf

Condition: used, Technical details: welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Welding process TIG/E/MIG-MAG Delivery consists of: Fgodpfxjwc R Udj Adref Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: new, Müller Co-Ax 5-PCS-2 10 NC valve with external 24V DC actuator, unused, 100% functional, scope of delivery as shown in the photos. Fodpsi Eb Taefx Adrogf

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm Fjdpfoxukpcox Adregf hole in the table 130 mm

Condition: used, Technical details: welding current: 500 A weight of the machine approx.: 129 kg dimensions L x W x H: 1,1x 0,7 x 1,2 m Control: Display for welding current with 2/4-cycle switchover, pulse, infinitely variable Fodpfx Adowtctmeregf Cooling system: Water-cooled with frost protection Shielding gas: Solenoid valve without pressure reducer 3.0 m hose package Torch head: Gas-cooled Ground clamp with ground cable 2.5 m Wire feed: 4 roller drive with wire Ø 1.0/1.2 mm *

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t Fodpeyif Nrofx Adregf dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Fedpfxjztd Nyj Adrjgf

Year of construction: 2026, condition: new, Magnetic separator for chip transport lines Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Fgedpecqvhxofx Adref Available immediately Location: In stock at warehouse 54634 Bitburg

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Fgjdpfezr Uh Dsx Adrof

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Fodpfx Aszr Uihodrjgf

Condition: good (used), Trolleys, transport trolleys, wheelchairs, transport dog -Angle frame: 825 x 550 mm -Angle frame made of: stainless steel (VA) -Rolls: made of polyamide Fodpfxob A Htio Adregf -Diameter: 160 mm -2 swivel casters and 2 fixed casters -Quantity: 24 pieces available -Price: per piece

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. Fgsdpfeyr Tlcjx Adrsf This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, empty load weight: 5,750 kg, maximum load weight: 24,250 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/1993, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Customer vehicle. Subject to printing errors, errors and changes. Sample images. More details available at: ! Fgedpfx Adjzr Sgkjref

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. Fgsdpfx Adefyadbjrjf For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Manufacturer: Müller Stanz- und Umformtechnik GmbH & Co. KG Type: PMLE250x1700 R-HK Machine No.: A05036-02 Year of manufacture: 2006 Machine type: Eccentric press Press force: 2500 kN Press force: 250 t Stroke rate: 20–120 min⁻¹ Stroke: 25–125 mm Ram adjustment: 100 mm Voltage: 400 V Motor power: 55 kW Connected power: 100 kW Weight: 47,000 kg Draw cushion: No Condition: Used Machine is leaking hydraulic oil Fsdpfjzrz Ecox Adrjgf Several leaks are present in the hydraulic system Tension pins for the ram adjustment have been deactivated due to the hydraulic leaks Sold without conveyor system Videos available upon request Location: Freiburg