Used Hole for sale (3,408)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Bledpfx Ajzhub Aebtol Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 2019, - Magazine loading system - Clamping table for frame parts - 3 horizontal, longitudinal drilling units from the rear - 4 vertical drilling units from above 1 Drilling machine Manufacturer: KOCH Type: BL 2500 NC select line - used - Year of manufacture: 2019 Workpiece dimensions Workpiece length 150 - 2500 mm Workpiece width 20 - 300 mm Workpiece thickness 10 - 50 mm Material: Solid wood Blodpezuynhofx Abtjl Magazine loading system 1 with workpiece return. Workpiece insertion via 2 parallel-controlled servomotors. The number of workpieces in the magazine depends on the workpiece weight. Manual workpiece insertion Clamping table for frame parts 1 By inserting 3 support segments into the longitudinal drilling units, workpieces can be inserted manually and clamped with clamping cylinders and templates. This also allows for special workpiece dimensions. Work cycle triggering via 2 manual controls on the swappable control panel. 3 horizontal, longitudinal drilling units from the rear Construction width 160 mm Drilling motor 2 kW Longitudinal adjustment (X) with LCD display Vertical adjustment (Z) With dust extraction 4 vertical drilling units from above (supported on one side in a linear guide) Adjustable over the entire working width (X), reading LCD display. Adjustable in working depth (Y), reading LCD display One vertical clamping cylinder mounted directly on the unit Counterpieces for through-holes are available as an option. Drilling motor 1.5 kW at 50 Hz Drilling stroke 50 mm Speed 2,800 rpm Total drill length 70 mm With 4 rotary indexing heads with quick adjustment (for vertical drilling units) with fixed stops at 0 and 90 degrees Positioning control KOCH NUMERIC Basic 1 Positioning control with Beckhoff C6920 industrial PC Intel Celeron 2.2GHz CPU 2.5 320GB HDD 1x RS232, 2x USB, 1x Ethernet available 15-inch touch panel Operating system Windows 7: English User interface in English Input of all machine commands via the touch panel Software is prepared for an online connection. The configuration of the online connection (network) and commissioning are carried out by the customer or their software company. USB port on the PC 4 x Dynamic NC axis (with bearing control) for Z axes Connection data 1 Electrical connection 400 V, 50 Hz, 3 phases Voltage fluctuations max. + 6 % to - 10 % If protected by an RCD (residual current device) on the customer's side, an all-current sensitive (R CCB, Type B) RCD with a rated residual current of /= 300 mA must be used. Air connection 7 bar Dust extraction air velocity min. 30 m/s Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Vitap's smart solution for through-hole drilling and grooving with automatic return to the operator. Three controlled axes: - X-axis – continuous workpiece transport via a patented belt system. - Y-axis – drilling head movement, guided by rack and pinion. - Z-axis – drilling, guided by ball screw. The fewer limitations, the greater the progress! With our machine, we do not impose any limits on workpiece length. Simple TPA programming: - You can position the holes individually. - The machining operations are displayed on a virtual workpiece. - If the workpiece dimensions change, the holes can be automatically adjusted. Office software license – Power lies in tranquility. - Perhaps you have better ideas in a quieter environment? This allows you to make better use of the flexible CAD system. - With this license, you can write programs where they are developed and discussed, in the office. Color LCD TFT 19" 5/4 screen USB port for loading programs from any office workstation 3 password-protected access levels (operator, supervisor, assistance) Bljdpfxszutqio Abtsl Technical data: - 9 vertical spindles, individually controllable - 2+2 horizontal drilling spindles in X - 1+1 horizontal drilling spindles in Y - 1 grooving saw unit (saw blade diameter 100 mm) - Max. workpiece thickness 50 mm - Max. workpiece weight 50 kg - Max. workpiece size: X unlimited, Y 920 mm, Z 50 mm - Min. workpiece size: X 270 mm, Y 150 mm, Z 10 mm - Workpiece transport speed: 25 m/min - Spindle speed 3,600 rpm - Max. horizontal drilling depth, X and Y axes 30 mm - Max. vertical drilling depth 45 mm - Max. vertical tool diameter 35 mm - Max. horizontal tool diameter 12 mm - Motor power 1.7 kW - CE standard

Condition: used, The scope of delivery includes: 1x bracket for rear panel grid, used Material color: Sendzimir galvanized Internal designation: Variant 3 Bledjzvb Dmjpfx Abtsl Diagonal length: approx. 250 mm Overall width: approx. 110|74 mm Protrusion: approx. 125 mm Material thickness: approx. 3.00 mm Weight / piece: approx. 0.48 kg 2 elongated holes: 55 x 9 mm (W x H) Height: approx. 35 mm General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Year of construction: 2010, operating hours: 540 h, condition: ready for operation (used), travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,735 mm, travel distance Z-axis: 250 mm, overall weight: 2,000 kg, number of axes: 4, This 4-axis SCM TECH Z2-27-C wood boring machine was manufactured in 2010. It features a maximum workpiece height of 160 mm, length of 2700 mm, and width of 1300 mm. The machine includes a routing spindle and a horizontal boring unit, ensuring versatility in operations. If you are looking to get high-quality wood processing capabilities, consider the SCM TECH Z2-27-C machine we have for sale. Contact us for further details. • Electrical: 400 V, 3 + N, 33 A, 50 Hz, breaking capacity 10 kA Bedpfx Ajzug A Ejbtsll • Control: Xilog Plus • Machining units: saw unit (included), horizontal boring unit (included), routing spindle: 1 • Workpiece capacity: max height 160 mm; max length 2700 mm; max width 1300 mm; max width (double posts) 1210 mm • Max travel speed: 60 m/min • Clamping system: pneumatic locking bars; number of clamping bars: 6 • Suction cup sizes: 120x120 mm and 55x120 mm • Machine on: 5.500 h

Year of construction: 2014, condition: ready for operation (used), spindle motor power: 4,000 W, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis BIESSE Skipper v31 was manufactured in 2014. It features a powerful 12 kW machine with a main spindle speed of 15,000 rpm. The machine is equipped with 16 drilling spindles (6 horizontal and 10 vertical) and a grooving blade, allowing for versatile drilling and milling capabilities. If you are looking to get high-quality wood boring capabilities, consider the BIESSE Skipper v31 machine we have for sale. Contact us for further details. Bjdpfozug Dijx Abtell • Quantity available: 2 units • Machining type: Drilling and milling • Drilling spindles: 16 total (10 vertical, 6 horizontal) + grooving blade • Maximum workpiece size: X 2500 mm, Y 900 mm • Axis travel speeds: X 25 m/min, Y 50 m/min, Z 25 m/min • Electrical/power: 12 kW installed power; 415 VAC; 21 A

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2018, total width: 2,550 mm, total height: 980 mm, Equipment: ABS, Krone ZZB18eLZ Dolly, Mega or standard axle, actively steered axle, SAF axles, 23,000 km, large Wabco Trailer Smart Board, first owner, like new. Technical description: Frame as a double T-longitudinal beam with welded cross members, fifth wheel coupling, mounted on a turntable, overall height approx. 185 mm, underrun protection according to EC regulations. Drawbar for steered axle with bolted 50mm or 57.5mm drawbar eye, length when coupled low 4,150 mm, extendable by 4x100 mm, length when coupled high 3,500 mm, extendable by 3x100 mm (center of drawbar eye to center of fifth wheel plate). Blodpfx Aezxixqebtel Front support with crank and gear. Actively steered dolly axle, low maintenance with disc brakes (430mm), offset 120, air suspension with lifting and lowering device, 1 valve, center hole centering. Tires: 4, size 445/45 R 19.5, manufacturer according to Krone's choice. Wheel covers according to EC directives 78/549/EEC and 91/226 EEC with corresponding splash protection device, black plastic mud flaps as quarter panels with upper tarpaulin cover, at the rear with mud flaps. Braking system according to ECE-R13, including vehicle stabilization function, spring brake parking brake, EBS system, 2S/2M, 2 sensors on one axle, diagnostics via ISO7638 connector (EBS supply cable), Palm coupling connections, brake connections for trailer on a strip in the frame. Lighting and signaling system according to ECE-R48, two 7-pole sockets DIN1185/3731, license plate, outline and side marker lights in LED design, multi-function tail lights including 1 rear fog light and 1 reversing light, electrical connections for trailer on a strip in the frame, connection cable for electrical and air connections (trailer). Steel parts shot-blasted, KTL-primed and powder-coated, standard paint finish (single-color), underrun protection and lighting carrier powder-coated in white, axles including wheel hubs in RAL 9005, components in black or galvanized, rims in silver, contour marking according to ECE-R48. Despite the greatest care, errors in the advertisement cannot be ruled out. Errors and prior sale are reserved!

Condition: new, power: 405 kW (550.65 HP), axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list; complete equipment list available upon request. Equipment: * Chassis height MED (medium); please refer to VBl/WIS for precise dimensions (depending on tire size) * Tag axle * Electro-hydraulically steered, single-tired * Rear axle suspension with air suspension * 1 drive axle * 1 tag axle * Globetrotter XL safety cab * FH wheelbase 6,000 mm * Exhaust emissions: Euro 6 compliant * with SCR (Selective Catalytic Reduction) * Particulate filter and exhaust gas recirculation * Euro 6 emission level, diesel engine 12.8 l, 551 hp / 405 kW, 2,652 Nm * Fuel type: diesel, Volvo Engine Brake+ (VEB+) * Braking performance: 340 kW/462 hp (D13S), 430 kW/585 hp (D13T/TURBO-TC), or 525 kW/714 hp (D17A); complies with ADR * Braking regulations, 1-Shift AT2612 * Automated 12-speed transmission (direct gear), max. input torque: 2,652 Nm * Liftable axle, rear axle RSS1370C, single reduction * Axle load 13 t, GVW 70 t * Differential lock * Front tires: 295/60R22.5 * Drive axle ratio 2.64: 1 * Driver comfort package * Extended static LED cornering light * Air conditioning with automatic temperature control * Sun sensor, fog sensor * Air quality sensor and activated carbon filter * Armrests covered in leather, grab handles for entry * Leather steering wheel * Leather finish for sunroof and emergency exit * Electrically operated (tinted glass) * Rearview mirrors, heated and electrically adjustable * with wide-angle mirror on both sides and close-range mirror on the passenger side * Additional close-range camera on the passenger side for blind spot monitoring * Upper bunk, 700x1900 mm, foldable and height-adjustable, with safety net * Lower bunk, foldable, 2000x815/740/660 mm (center, top, bottom) with safety net * Air suspension on front axle(s), lift on air suspension * Front axle: Basic (more ground clearance, shorter suspension travel) * Max. front axle load 18.0 t (technical) * Max. rear axle load 19 t (technical) * Axle load limiter 11.5 t, first tag axle 7.5 t * Dual-circuit power steering, disc brakes Bedpfx Abszxv Sqstsll * heavy-duty disc brakes, EBS (Electronic Braking System) * Electronic brake system * Medium package, air suspension on the rear * 380 L aluminum tank, right side, 0-shape, 560 mm high, 1230 mm long * AdBlue tank, usable volume 48 liters, 560 mm height * Trailer coupling with D-value = 190 kN for G-150/G-260 * Trailer coupling hole pattern, Rockinger400 G-150 (note D-value/max. trailer load!) * Aluminum rims, Dura-Bright EVO (polished) * Standard bore for long wheel studs * Standard wheel nuts * Chrome protective rings * Front tires: 385/55R22.5 AA * Tires: 295/60R22.5 * Tag axle tires: 355/50R22.5 * Eco-Cruise Control (cruise control), including brake cruise control * Manual gear shifting possible in automatic mode (incl. kickdown function) * Additional off-road program * Digital tachograph * Generation 4 speed limiter, 90 km/h * Electronic Stability Program (ESP) * Package 4 for solo vehicles or vehicle combinations with a high or extra-high center of gravity (loaded) * Adaptive Traction Control, Adaptive Cruise Control (ACC) * with collision warning and emergency braking function * Lane Keeping Assist, Side Collision Avoidance and Turning Assist (on both sides) * Driver warning system according to GSR standard * Driver fatigue monitoring * 8 speakers: 4 in the dashboard, 1 in each door, and 2

Condition: used, mileage: 335 km, power: 390 kW (530.25 HP), first registration: 09/2026, fuel type: diesel, overall weight: 18,000 kg, color: red, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), soot filter, Vehicle number: 263354 First owner, accident-free, regularly serviced according to service schedule, non-smoker ---- ASSISTANCE SYSTEMS * Electronic braking system with ABS and ASR * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Keeping Assist * Traffic Sign Recognition ENGINE, TRANSMISSION & CHASSIS * High Performance Engine Brake * Air compressor, 2 cylinders * Single-plate clutch * Front axle, stub axle version * Stabilizer bar, front axle INTERIOR * Automatic climate control LIGHTS & VISIBILITY * Night driving light switch WHEELS * Aluminum rims 11.75 x 22.5, front axle, Dura-Bright, Alcoa * Aluminum rims 9.00 x 22.5, Dura-Bright, Alcoa * Tire pressure monitoring system EXTERIOR * Air intake, behind the cab, mounted * Footplate over the frame, partial cover * Fifth wheel coupling, low maintenance * Fifth wheel angle, with hole pattern * Fifth wheel coupling height, H = 190 mm * Cab entry left/right, fixed * MirrorCam mount chrome, lower cover in cab color OTHER EQUIPMENT * Wheelbase 3700 mm * Rear axle, bevel gear 440, hypoid, 13.0 t * Rear axle with active lubrication, unregulated * Front suspension 8.0 t, 2-leaf * Tank 570 l, left, 650 x 700 x 1450 mm, aluminum * Second tank, right * Main tank, left * Fifth wheel position +600 mm * Cab width 2.50 m Additional Features * 3rd generation engine OM471 * AdBlue tank 100 l, left * Secondary oil retarder * ProCabin-Giga, flat floor * Digital tachograph, 2nd generation, version 2, ADR Bsdpjzxkzgofx Abtoll * Frontguard Assist * ATS warranty according to general terms and conditions, 4th year/600,000 km * Auxiliary climate control system * Secondary oil retarder * Driver and passenger air-suspended seats * Fuel tank right 430 L * ProCabinGiga cab ---- Subject to prior sale and errors. The vehicle description is for general identification purposes only and does not constitute a guarantee in the legal sense. Please contact our sales team for detailed information on the equipment. Please contact us.

Condition: used, mileage: 150 km, power: 129 kW (175.39 HP), first registration: 09/2026, fuel type: diesel, overall weight: 7,200 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, tail-lift, Are you looking for a different model, engine type, dimensions, or other specifications? Feel free to contact us. We offer financing and leasing at attractive conditions – also for Austria, the Netherlands, and new business founders! Vehicle: * Wheelbase: 4100mm * 6-speed manual gearbox * Single cab * Twin tires on rear axle * Gross vehicle weight 7.2 tonnes * Digital tachograph * Speed limiter 90km/h Interior: * Luxury driver's seat, sprung, heated * Grab handle on A-pillar * Comfort headrests * Multifunction steering wheel in leather * Seat covers in fabric Safety & Assistance: * ESP * AEBS + City Brake System * Airbag for driver * Front Obstacle Detection (MOIS) * Operating and maintenance instructions, electronic * Parking sensors rear * Lane Centering Assist Plus (LC) * Eco-Smart function * Driver Drowsiness Detection (DDAW) * Turning Assistant for Passenger Side (BSIS) * Rear blind spot radar * Traffic Sign Recognition (ISA) * Spare wheel Wheels & Technology: * Mirrors electrically adjustable and heated * Digital radio DAB 7" touch * Apple CarPlay/Android Auto * All-weather tires * AIRPRO air suspension rear axle * Air conditioning with automatic climate control * Heated fuel filter * Hot water auxiliary heater * Light and rain sensor * Fog lights * Full-LED headlights * Connectivity Box 4G incl. TCO * Adaptive Cruise Control (ACC) * Preparation for toll system (OBU) * AdBlue tank 20 L incl. driver's side filler * Fuel tank 90l integrated Refrigerated box: * Insulation 80mm/100mm * Aluminum floor with non-slip surface * Two rear doors with separate latch and 270° opening angle * Side door with separate latch and step * Combination anchor and lashing rail (1 on the left & 1 on the right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drainage holes in the front of the box * Double sealing system at the loading openings * Reversing camera * Side underrun protection * Wheel arch made of aluminum with mud flaps * Side marker lights Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Running and standby cooling * With heat pump * Temperature recorder (thermograph) * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000kg * Platform depth 1800mm * Roll-off safety * LED warning light * Remote control with spiral cable * Trailer coupling up to 3.5t trailer load (tow hitch, tow hitch socket 12V 13-pole) Additional extras for the body are available at an extra cost. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will be happy to deliver it from our stock. Bledpfsy Ngmpox Abtel Individual customization possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Subject to errors and prior sale. Best regards, Pimenta Automobile

Condition: used, mileage: 150 km, power: 125 kW (169.95 HP), first registration: 09/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Are you looking for a different model, engine type, dimensions, or other specifications? Please feel free to contact us. We offer financing and leasing at attractive conditions – also for the Netherlands, Austria, and new businesses! Vehicle: Wheelbase: 4325 mm * 6-speed manual transmission Blodpfxswnvvkj Abtel * Single cab * Twin rear tires * Gross vehicle weight 5 tons * Speed limiter 90 km/h * Digital tachograph 4.1 Technology/Comfort: Digital radio * Acoustic package * Apple CarPlay/Android Auto * MBUX multimedia system * Smartphone integration package * Air conditioning “Tempmatic” * Cruise control * Electrically adjustable, extended, and heated exterior mirrors * Multifunction steering wheel adjustable in height and inclination * Light sensor * 93L main tank * 22L AdBlue tank * Driver’s single seat with armrest * Comfort driver’s seat * Passenger’s double seat * 3 seats * Seats with black leatherette upholstery * Electrical pre-installation, configurable special module * Hill start assist * On-board computer with color display * Preparation for toll system * Central locking with remote control * Electric windows (front) * Fuel filter with water separator Safety: * All-season tires * Reinforced front axle * Side wind assist * Lane keeping assist * Rain sensor * Intelligent speed assist * Reversing warning * Fog lights with cornering light * Attention Assist * Battery main switch * Halogen headlights * Outline lights * Side marker lights * Adaptive brake light * Seat belt warning * Rear view camera Refrigerated box: * Insulation 80mm/100mm * Floor reinforced with anti-slip structure * Two rear doors with separate lock and 270° opening angle * Side door with separate lock and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the box front * Double sealing system at the loading opening * Side underrun protection * Wheel arch protection with mud flaps Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and stand-by cooling * With heat pump * Temperature recorder (thermograph) * ATP certificate possible Additional extras for the body are available at an extra charge. ----Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not located in Wachtendonk, we will gladly deliver it from our stock. Custom bodywork is possible upon request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and spelling errors Errors and prior sale excepted Best regards Pimenta Automobile

Condition: new, table length 4000 mm table width 2000 mm table height 850 mm Blodpfx Aekuculebtol Vertikal stroke 50 mm weight of the machine ca. 2,5 t dimensions 4,0 x 2,0 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: used, Year of construction: 2005, functionality: unexamined, overall weight: 1,500 kg, total length: 1,250 mm, total width: 1,250 mm, plate height: 150 mm, plate width: 1,250 mm, plate length: 1,250 mm, Equipment: type plate available, FIBRO 4x Precision Changeable Pallet 1250x1250 mm / 1,500 kg / Pallet Changing System Description Bledozxz Azopfx Abtjl Manufacturer: FIBRO GmbH, Rotary Table Division Type: Precision Changeable Pallet 1,250 × 1,250 mm Year of Manufacture: 2005 Quantity: 4 pieces Package consisting of 4 solid FIBRO precision changeable pallets from an industrial pallet changing/rotary table system. The pallets were used as a machine interface and as a carrier for large workpiece clamping devices. These are not simple clamping plates, but precisely manufactured changeable pallets with indexing, pallet clamping, and integrated pneumatic transfer. Each pallet has a clamping surface of 1,250 × 1,250 mm and a weight of approximately 1,500 kg. The top surfaces have different, customer-specific hole patterns. The pallets are equipped on the underside with two mounted and aligned indexing rings each. The clamping slots have hardened strips as running and contact surfaces. In addition, each pallet has a pneumatic connection with one line. Technical Data - Quantity: 4 pieces - Dimensions per pallet: 1,250 × 1,250 mm - Height: approx. 150–160 mm - Weight: approx. 1,500 kg per pallet - Total weight of 4 pallets: approx. 6,000 kg - Pneumatic connection: 1 line per pallet - Indexing: P1 / P2 - Underside: 2 indexing rings per pallet - Clamping slots with hardened strips - Thread/hole patterns including M12, M20 and M30 - Customer-specific hole patterns - Original drawings or technical FIBRO documents available According to the manufacturer's data, the documented plan parallelism of the pallet top to the bearing surface is 0.025 mm, and the flatness is 0.040 mm. These are explicitly the original manufacturer's values and not a current measurement of the used pallets. Factory/Serial Numbers 1817739 / 002 1817739 / 003 1817739 / 004 1817739 / 005 The pallets have partially different article numbers and different customer-specific hole patterns. Accessories: The offer also includes the mechanical guide and rail set of the pallet changing system shown in the pictures, consisting of roller/guide rails, solid guide and support strips, stop and guide elements, and the existing fastening parts. Condition: Used condition from industrial application. The clamping surfaces show corresponding machining, clamping and wear marks, as well as some discoloration and superficial corrosion marks. The existing hole patterns originate from the original application. A current metrological check of the geometric accuracy has not been carried out. Sold in the existing condition and scope of delivery as shown in the pictures.

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Blodpfx Ajzx D A Djbtjl Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: ready for operation (used), Fanuc A06B-0853-B100 / B-65152E AC spindle motor, serial number: C987J1757 – has a hole in the shaft (see photos), used, in good condition, 100% functional, scope of delivery as shown in the photos. Bodpfszu El Ssx Abtell

Condition: used, maximum load weight: 19,740 kg, overall weight: 28,000 kg, axle configuration: 2 axles, first registration: 12/1999, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,630 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion, subject to errors, typographical errors, and prior sale: Spier 2-axle double-deck box trailer with beams (Vehicle 159) Bsdpozxvkysfx Abtjll First registration: 16.12.1999 Type: SGL 290 Permissible gross vehicle weight: 28,000 kg Unladen weight: 6,590 kg Payload: 19,740 kg Overall length: 13,800 mm Overall width: 2,550 mm Overall height: 4,000 mm Interior length: approx. 13,450 mm Interior width: approx. 2,480 mm Interior height: approx. 2,630 mm Double deck with 13 beams 12 x beam hole strips from top to bottom + 3 x stacked approx. 3 m in the rear area Reinforced floor Roller shutter door Air suspension with lifting and lowering function 2 x 12-ton 2-gear winch Chock 2 x LED reversing lights Tires: 385/65R22.5, 1) approx. 80/40%, 2) approx. 40/40% Ideal for storage, watertight Price: € 2,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to € 5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available Bsdezxd Ruspfx Abtoll - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Bjdpfozxna Tox Abtsll Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? Bjdpfx Abszxncuetell - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Blsdpfx Ajzxndlobtel Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: new, Hot-dip galvanized pallet racking for outdoor use Data : - H : approx. 450 cm - D : approx. 110 cm - L : approx. 14 running meters - Load: 3000 kg shelf load - Stand in hot-dip galvanized - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in hot-dip galvanized - New BLT / PR45 FVZ - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x uprights approx. 450 cm x 110 cm, pre-assembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x locking pins. - 40 x M8 x 20 locking screw incl. nut. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. Blsdpfxezxpb Ee Abtjl -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 2.990,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Customer note : When installing the locking pins / locking screws, it may be necessary to re-drill holes that have been glued through the hot-dip galvanizing. Unfortunately, this cannot be ruled out with high-quality hot-dip galvanizing. Please contact us if you have any questions.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm Bsdpfx Abozxpdystsll - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), HOLE-DRILLING MACHINE Manufacturer: IXION-AUERBACH (GERMANY), Type: AX 1 - TL, Year of manufacture: 2002, Drilling depth: 600 mm. Bodozyakyjpfx Abtjll

Condition: new, Kessler DMQ .4.AFB motor, mounting hole spacing: 248 x 248 mm, drive shaft diameter: 55 mm, unused with storage marks, 100% functional, scope of delivery as per photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Bsdpfxsi D Iyze Abtjll

Condition: ready for operation (used), Rexroth MAC093B-0-JS-4-C/130-A-1/WI517LV 3-Phase Permanent Magnet Motor, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, overhauled by the manufacturer in 2007, has not been used since, very good condition, in original packaging, 100% functional. Blsdpfx Asi D Nf Rebtol