Used Homag Bmg for sale (490)

Condition: used, Year of construction: 2019, functionality: fully functional, 6 heads, good, working condition, FREUD tool set Prodpfx Aoz Tymmeirjc

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction Podpoz Df Txjfx Airorc - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: used, Year of construction: 2012, Edge banding machine Manufacturer: Homag Type: KAL 211 Year of manufacture: 2012 Technical data Feed rate: 18-25 m/min; with FK11 max. 20 m/min Working height: approx. 950 mm Machine length: approx. 7,845 mm Workpiece thickness: 12-40 mm standard; version up to 60 mm Edge material roll: approx. 0.3-3 mm Edge material strip: approx. 0.4-6 mm Roll diameter: max. 830 mm Pjdpe Af Ip Defx Airorc Pneumatics: 6 bar, Electrical: 400 V / 230 V, 3 phases, 50 Hz Units / Equipment - Release agent spray unit top/bottom - Joining milling unit - Gluing unit - 2-roll edge magazine - Pressure zone - Trimming unit HL81 - Pre-milling unit BF10 - Profile milling unit FK11 - Profile drawing blade PN10 - Finishing unit with glue joint drawing blade and buffing unit - Preparation for HOMAG 1 laserTec - powerControl PC22 with touchscreen - Automation packages - In addition, drawing blades for both 2mm and 1mm edges are available. PUR retrofit 2023 In 2023, the machine was retrofitted with a PUR gluing system from GP Service, type EasyPUR AC 34, as well as a RIEPE spray system, type LP289/99 24 V. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: reconditioned (used), Year of construction: 2018, machine/vehicle number: 0-261-71-2124, functionality: fully functional, total length: 6,075 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The edger, after a complete overhaul, will be available at the end of October. Prsdpfxez A Tf Ts Airjc TECHNICAL DATA: Element feeding and removal ■ Pressure beam with pressure belt ■ Prepared for connection to a return system ■ Variable feed rate: 8-18 m/min ■ Automatically adjustable alignment guide, height of the pressure beam, and pressure zone Edge banding ■ QA65 glue pot ■ EVA preheating unit, 8 kg/h Element finishing ■ Anti-adhesive and cleaning fluid ■ Corner rounding unit with a double profile FLEXTRIM ■ Trimming unit ■ Multifunctional profile sanding unit with R-2 and R-1 tools ■ Edge milling unit with R-2 and R-1 tools ■ Flat sanding, upper and lower polishing unit Documentation ■ Selected languages: Croatian, German, English ■ Format: Data carrier + paper documentation General information ■ Control system: HOMAG POWERTOUCH control system ■ CE marking: YES ■ Operating condition: Ready for operation ■ Machine length: 6075 mm ■ Year: 2018 ■ Number of processed meters: 2.5 million/m

Condition: excellent (used), Year of construction: 2020, HOMAG CABTEQ S-250 / MPH 450/25/07 carcass press, year of manufacture 2020. Pjdpfo Adub Esx Airsrc Carcass press for furniture manufacturing. Model: MPH 450/25/07. Collection possible from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Disassembly, loading, and transport will be arranged. Price on request. Contact: DS-Maschinen – Owner: David Schulz.

Condition: excellent (used), Year of construction: 2020, Edgebanding machine HOMAG EDGETEQ S-380 / KDF 650 C, year of manufacture 2020. Pedpo Adubrofx Airsrc Single-sided edgebanding machine. Type OPTIMAT KDF 650 C. Screen-based operation. Matching XES 200 service station available separately; not included in the offer. Year of manufacture 2020 according to the nameplate. Collection from December 15th. Earlier collection only possible by arrangement. Inspection by appointment. Dismantling, loading, and transport after consultation. Price upon request. Contact: DS-Maschinen – Owner David Schulz.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,198 h, Brandt Ambition 1120 c edge banding machine with 2 glue tanks, joining, corner copying, and two trimming blades. A good entry-level machine with extensive features. A video of the machine in operation can be sent upon request. Edge thickness: approx. 0.4 - 3 mm Workpiece height: approx. 10 - 40 mm Feed rate: approx. 8 m/min Noise protection hood Extendable workpiece support Dust extraction connection 1x100mm, 4x80mm including the piping shown, connected to 200mm Easy-Touch control with color screen for easy operation of the machine 10 programs can be stored Units: Upper pressure, manual adjustment with crank and SIKO counter Infeed guide, manual adjustment with SIKO counter Jointing cutter with diamond cutters, sharpened A total of 2 replaceable glue tanks for quick color change from white to transparent Gluing unit with automatic edge feed for roll material up to 3 mm Pressure zone with 3 rollers Crosscut saw with 2 motors Combination milling unit, easily adjustable by hand for flush trimming, chamfering and radius Corner rounding cutter R2 with diamond cutter, 1 motor Radius trimming blade R2, manually adjustable Glue joint trimming blade with large roller, pneumatically controlled Hood locking mechanism CE marking Operating manual in folder format All indexable inserts of the milling units and trimming blades have been replaced or resharpened, saws sharpened, diamond jointing cutters sharpened. The machine is therefore ready for immediate use. Only the diamond cutter of the profiling cutter has not been replaced, but it is still sharp. Original paint, only a few spots have been touched up. Dust extraction hoses renewed. Approx. 1200 operating hours, i.e. only 1/2 hour per day. Machine dimensions approx. 4300 (with table) x 1250 x 1600 mm (L x W x H) Weight approx. 950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider". Pjdpfx Aiszn Afpsrjrc

Condition: used, Year of construction: 2012, PUR retrofit 2023 / EasyPUR AC-34 / RIEPE spraying system LP289/99 24 V. Retrofit including 2x spare glue reservoirs. Output approximately 15,000 - 20,000 linear meters per year. Annual maintenance by HOMAG. Feed rate: 28-25 m/min; with FK 11 max. 20 m/min. Working height: approx. 950 mm. Machine length: approx. 7845 mm. Workpiece thickness: 12-40 mm standard; up to 60 mm available. Edge material roll: approx. 0.3-3 mm. Edge material strip: approx. 0.4-6 mm. Roll diameter: max. 830 mm. Pneumatics: 6 bar. Electrical: 400 V / 230 V, 3 phases, 50 Hz. Equipment: Release agent spraying unit top / bottom. Joint milling unit. Glue application unit. 2-roll edge magazine. Pressing zone. Cutting unit HL 81. Pre-milling unit BF 10. Profile milling unit FK 11. Trimming blade PN 10. Finishing unit with glue joint trimming blade and buffing unit. Preparation for HOMAG laserTex powerControl PC 22 with touchscreen. Automation packages. Trimming blades for 2mm as well as for 1 mm edges. Location: Customer. Prsdoz Hb Hmspfx Airec

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Pedpfx Aie Adr Hxororc Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-303-21-0734, functionality: fully functional, operating hours: 19,436 h, input voltage: 400 V, input current: 7 A, input frequency: 50 Hz, type of input current: three-phase, total height: 3,000 mm, total length: 14,000 mm, total width: 3,400 mm, overall weight: 2,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOMAG VKS 250 cardboard cutting machine For sale is a HOMAG VKS 250 for the automated production of customized corrugated cardboard packaging. The system is designed for both series production and single-item production and enables cutting, creasing, and perforating in both longitudinal and transverse directions. The machine has been further modernized and expanded and is ideal for companies that want to produce packaging flexibly and according to their specific needs. Technical data / Features: 8 real + 8 virtual longitudinal tools 1 transverse tool automatically adjustable tools Multi-line processing automatic 5-position endless cardboard changing system, 3 of which are side-by-side intelligent remaining length management Infeed width: 350–2,500 mm Cardboard thickness: 2–7 mm Processing of 1- and 2-ply corrugated cardboard Longitudinal cutting tolerance: max. 0.5 % Transverse cutting tolerance: max. ± 2 mm Pjdezv S Snopfx Airsrc Working height: 900 mm IntelliCut machine control HOMAG powerTouch multi-touch control panel PLC control and industrial PC automatic production according to production lists Connected load: 4.5 kW Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Space requirement approx. 10,500 × 3,400 × 3,000 mm Weight approx. 2,800 kg Further information on condition, modernization and price available upon request.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-250-75-2227, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine by HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Year: 2020 Workpiece length (X): 200mm to 2500mm Workpiece width (Y): 70mm to 850mm Pedszvxz Aspfx Airjrc Workpiece thickness (Z): 12mm to 60mm Safe clamping system protects delicate panel surfaces Power supply: 400V (3 phases), 50Hz

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. Prodpfxsz E S E Re Airoc If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, Year of construction: 2012, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Podpfxo Aba Rte Airsrc

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-8843, input frequency: 50 Hz, input current: 21 A, For sale: a powerful, compact, vertical CNC drilling machine from HOMAG. Used in the production of custom-made furniture, regularly serviced, and in very good condition. Ready for immediate use. Key information and technical condition: Model: Drillteq V-200 / Optimat BHX055 Prsdpfx Aiozvx Ucjrjc Year of manufacture: 2022 Workpiece length (X): from 200mm to 2500mm Workpiece width (Y): from 70mm to 850mm Workpiece thickness (Z): from 12mm to 60mm Safe clamping system to protect delicate surfaces Power supply: 400V (3 phases), 50Hz

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. Prsdoz H Rp Dopfx Airsc 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps.

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2627, functionality: fully functional, input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 80 mm, workpiece weight (max.): 60 kg, number of axes: 3, total height: 2,500 mm, total length: 2,500 mm, overall weight: 3,200 kg, table width: 4,740 mm, Equipment: CE marking, documentation/manual, HOMAG / WEEKE OPTIMAT BHX 200 CNC – Year of manufacture 2016 – HSK63 9 kW – Clamex-P – automatic tool changer – extensive equipment We are selling our HOMAG / WEEKE OPTIMAT BHX 200 vertical CNC machining center, manufactured in 2016. We purchased the machine directly from HOMAG Polska in 2018. Before the purchase, the machine was presented at a trade fair in Germany. It was exhibited with a very extensive range of equipment, which was one of the main reasons for our purchase. Prsdpezzxzmjfx Airec Originally, we planned to integrate the BHX 200 into our production line as part of further automation by connecting it to an industrial robot. Ultimately, we did not receive EU funding for this investment. At the same time, our current production volume is not large enough to utilize the full potential of this machine. This is also evident in the relatively low operating hours. For this reason, we have decided to sell the machine. The BHX 200 has served us reliably for many years and is still in continuous production today. We use it to manufacture furniture components from sheet materials. The machine operates very precisely and reliably and is ideally suited for flexible furniture production. This is not a basic BHX 200 with standard equipment. The machine has a very extensive configuration for drilling, milling, grooving, and hardware processing. Equipment: * Vertical drilling head V15 High Speed with 15 individually controlled spindles * 6 horizontal drilling spindles in the X-axis * 4 horizontal drilling spindles in the Y-axis * Additional vertical 3-spindle drilling head for hardware * HSK63 milling spindle * Power up to 7.5 / 9 kW * Speed range 1,250–24,000 rpm * Automatic tool changer * Automatic pick-up tool magazine with 4 positions for HSK63 tools or units * Special unit for Lamello Clamex-P * Unit for grooving in the X and Y axes * Optical workpiece control in X and Y * Automatically positioned workpiece clamps * Automatic adjustment to workpiece thickness * Integrated 1D/2D barcode system including wireless Datalogic barcode scanner and base station Workpiece dimensions: Length: 200–3,050 mm Width: 50–1,250 mm Thickness: 8–80 mm Maximum workpiece weight: 60 kg Control system and software: * HOMAG powerControl / powerTouch * 21.5" Full-HD touchscreen * woodWOP * DXF Import Basic * Tool database * Production list management * woodScan * Ethernet * UPS * ECO Plus * Climate control for the control cabinet The particular strength of this machine lies in its versatility. It is particularly suitable for manufacturers who produce many different types of furniture, sizes, and small to medium batch sizes. The combination of vertical and horizontal drilling, milling, grooving, Clamex-P processing, and automatic tool changer allows a very large number of machining steps to be performed on a single machine. The machine is available immediately. We are confident in its very good technical condition. It is still in use in our production. An inspection and demonstration of the machine in operation can be arranged by appointment. Location: Białystok, Poland.

Condition: used, Year of construction: 2022, operating hours: 1,700 h, Panel dividing saw Manufacturer: Homag Type: Sawteq B-200 Optimat HPL200/38/22 Year of manufacture: 2022 Technical data - Cutting length: 3800 mm - Width of feed table: 2200 mm - Number of clamping devices: 7 - Feed rate: max. 80 m/min - Stepless feed rate Podpfxj Abaqyo Airorc - Panel thickness: min. 9.5 mm - Saw blade overhang: 95 mm - Saw blade diameter: max. 380 mm - Main motor: 9.2 kW - Scoring saw - Labeling manually via HOMAG PICA - Control system: CADMATIC 5, Homag POWER CONTROL V2 - CE marking - Operating hours: 1700h Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles Prsdpfx Aioylp Slorec 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW Pjdpozz N Uqjfx Airjrc - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal - Projection laser SL LASER Pro Director 6 - Slotted table/magnetic table

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Prodpszy I Tcofx Airec

Condition: used, Year of construction: 2003, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Construction year: 2002 year Condition: used Category ID: 2094 Podozq Hwhepfx Airorc Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, operating hours: 489 h, Homag EDGETEQ 300 The machine will be available from approximately the end of December 2026. For further information about the machine, please see the images or feel free to request it. Pjdpfxez D U A As Airerc

Condition: used, Year of construction: 2015, The machine is suitable for precise and efficient drilling and dowel insertion in furniture production. Technical specifications: Year of manufacture: 2015 Machine dimensions: 2.6 × 1.6 m 3 × vertical drills 3 × horizontal drills X, Y, and Z axes – NC controlled and computer-adjustable Barcode scanner Uses dowels with a diameter of 8 mm Machine is in good condition Podpfx Ajz Incdeirerc The machine is available for inspection by prior arrangement. For additional information, pricing, or to arrange an inspection, please contact me.

Condition: used, Year of construction: 2022, operating hours: 1,700 h, PIŁA PANELOWA Producent: HOMAG Psdozkmrfspfx Airorc Typ: SAWTEQ B-200 Optimat HPL200/38/22 Rok 2022 Z załadunkiem only 1700 working hours !!!!

Condition: used, Year of construction: 2002, functionality: fully functional, 4-axis machine with WOODWOP 4.5, from a carpentry workshop Working dimensions: X-axis 3,200 mm Y-axis 1,250 mm Work table: 6 pcs workpiece supports, each with 3 vacuum cups 4 pcs lifting rails for heavy workpieces 1 rear and 1 front stop row Vacuum pump 100 m³/h Tool arrangement: Main spindle 7.5 kW HSK 63 F with water cooling Speed 1,500 - 18,000 rpm with C-axis / positioning axis for adapter tools Drilling unit with 18 vertical spindles 6 drilling spindles horizontally Dado saw unit fixed in the X-direction Tool changer magazine, 8 positions, mounted at the rear of the support, moving in the X-direction, for milling tools and units Control: HOMATIC 2000 with WOOD WOP 4.5 Safety equipment: ----- * Foot mat protection in front of the machine Without tools Prsdpfj Afh Izox Airjc