Used Homag Panel Saw for sale (478)

Condition: used, Year of construction: 1999, total height: 3,000 mm, total length: 6,400 mm, total width: 4,300 mm, No. 3269 CNC machining center HOMAG BAZ 41/30K Used, year of construction 1999 Working dimensions: X 3000 mm / Y 1300 mm / Z 250 mm Gluing unit Drilling and milling unit with 4 spindles Flush milling unit Sanding unit Interchangeable air jet Adjustable milling and drilling unit Under-table milling unit Tool changer 12-station turret changer Bwodpfx Adsy Dtp Hs Dol Control system WoodWOP 5.0 Installation dimensions with safety barrier approx. 6400 x 4300 x 3000 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Table thickness: 60 mm. Thickness of coiled material: 3 mm Release agent application device Sanding unit Gluing unit Edge pressure unit End trimming unit Milling unit Edge rounding unit Edge scraper unit Glue scraper unit Cleaning device Bedpey Icgpsfx Ad Dowl Brush unit Control: Homag powerTouch

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Bwodpjy Exwfsfx Ad Djl Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, Year of construction: 2021, input frequency: 50 Hz, input current: 21 A, We offer this used HOMAG DRILLTEQ V-200 through-feed drilling machine, year of manufacture 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI 2.2 kW/1650 Pa two-bag extraction unit and various tools. Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse: 25 A Control voltage: 24 V Bwjdpfx Adjy Extme Del If you have any questions or need further information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Machining Center HOMAG BOF 311 Available August 2026 - Year of manufacture: 2008 (annual service by HOMAG) Bwjdpfjy I Dtqjx Ad Del - Main spindle overhauled in 2024 - WoodWop software - AP table (automatic table) - Table dimensions: 6000 x 1525 mm (10 consoles) - 18.5 kW main spindle / C-axis + Flex-5 interface - Y-axis machining with front stops: 1525 mm - Y-axis machining with rear stops: 1850 mm - Drilling unit - 30-position tool chain changer - Grooving saw unit on X-axis (swivable 0-90°) - Without tools / aggregates / chip conveyor - Vacuum pump If you have any questions, feel free to contact us. Additional photos/video available upon request. A viewing during production operation is possible; we will be happy to organize this for you.

Condition: ready for operation (used), Year of construction: 1985, Used folding machine line consisting of: Lifting table with pusher Roller conveyor Feeding unit Transfer system and workpiece pre-cleaning Double-end profiler Brand: Homag Type: FG63 Year of manufacture: 1985 Technical Specifications - With adhesive strip application - Machine for profiling and folding trim strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding pre-folded workpieces - Sliding shoe for pressing - Discharge table for material removal Electric scissor lift table Brand: Altek Year of manufacture: 2014 Technical specifications - Max. load capacity: 1000 kg Bedpfx Aey Drirjd Dowl - With integrated roller conveyor - Dimensions: approx. 3100 x 1000 mm - With height sensor for automatic detection of stack height and corresponding cycle timing Tilting skip Brand: Bauer Type: WU-R 1500 Year of manufacture: 1995 Technical specifications - Capacity: 1.5 m³ Crosscut and miter saw Brand: Bosch Year of manufacture: 2016 Industrial vacuum cleaner Brand: Nilfisk Type: Attik 751-11 3 Panel Transport Carts Brand: Fetra Panel Rack Brand: Robering Type: Dexion D90 Plus Year of manufacture: 2018 Technical Specifications - Consists of 5 uprights - Upright height approx. 4000 mm - Max. permissible shelf load: 3000 kg - Total of 16 crossbeams, length 2700 mm Lot of single-sided pallet trucks - Width approx. 1800 mm - Load depth: between 800 and 1000 mm - Approx. 9 units Aluminum folding ladder Cross-slider - Total length approx. 3000 mm - Roller width approx. 800 mm Used folding machine lineconsisting of:Lifting table with pusherRoller conveyorFeeding unitTransfer system and workpiece pre-cleaningDouble-end profilerBrand: HomagType: FG63Year of manufacture: 1985Technical Specifications- With adhesive strip application- Machine for profiling and folding trim strips- Milling station on both sides- Control system: Siemens Simatic Touch- Glue application unit- Folding unit for folding pre-folded workpieces- Sliding shoe for pressing- Discharge table for material removalElectric scissor lift tableBrand: AltekYear of manufacture: 2014Technical specifications- Max. load capacity: 1000 kg- With integrated roller conveyor- Dimensions: approx. 3100 x 1000 mm- With height sensor for automatic detection of stack height and corresponding cycle timingTilting skipBrand: BauerType: WU-R 1500Year of manufacture: 1995Technical specifications- Capacity: 1.5 m³Crosscut and miter sawBrand: BoschYear of manufacture: 2016Industrial vacuum cleanerBrand: NilfiskType: Attik 751-113 Panel Transport CartsBrand: FetraPanel RackBrand: RoberingType: Dexion D90 PlusYear of manufacture: 2018Technical Specifications- Consists of 5 uprights- Upright height approx. 4000 mm- Max. permissible shelf load: 3000 kg- Total of 16 crossbeams, length 2700 mmLot of single-sided pallet trucks- Width approx. 1800 mm- Load depth: between 800 and 1000 mm- Approx. 9 unitsAluminum folding ladderCross-slider- Total length approx. 3000 mm- Roller width approx. 800 mmNote:The technical specifications and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2014, number of axes: 3, This 3-axis HOMAG WEEKE OPTIMAT ABD150 was manufactured in 2014. It is a used multi-spindle drilling machine designed for precision drilling and dowel inserting. If you are looking to get high-quality drilling capabilities, consider the HOMAG WEEKE OPTIMAT ABD150 machine we have for sale. Contact us for further details. • Used drilling and dowel inserting machine Bsdpfx Adoy Dgpas Dswl

Condition: ready for operation (used), Year of construction: 2010, Edgebander manufactured in 2010. This HOMAG KAL 210 Ambition 2264 is a used single-sided edge banding machine. If you are looking to get high-quality edge banding capabilities, consider the HOMAG KAL 210 Ambition 2264 machine we have for sale. Contact us for further details. Bwjdpfx Ajy Dgm Sjd Dol • Used single-sided edge banding machine

Condition: good (used), Year of construction: 2012, overall weight: 3,000 kg, year of last overhaul: 2025, Equipment: CE marking, - HOMAG KAL211 EDITION 2264 Year of manufacture: 2012 OVERVIEW OF AGGREGATE CONFIGURATION: - Control: powerControl PC22 - Top pressure with composite V-belt - Feed rate: 18 - 25 m/min - Workpiece thickness: 60 mm instead of 40 mm - Total length: 7845 mm - Electronic height adjustment FPR/L260+EDITION+FSQ - Quick-clamp system for application unit QA/PU - Separator spraying unit above/below - Jointing milling unit - Gluing station A20 with Quickmelt application unit - Magazine 2 manual, 2 rolls - Preparation for Lasertec activation unit - End trimming unit HL84 chamfer/straight - Automation package chamfer/radius AMB/EDITION2264/74 - Pre-milling unit BF10 1.5 kW Bwsdpfxeyz Dbbo Ad Dol - Contour milling unit FK11 manual - Profile scraper PN10 - Finishing unit - Glue joint scraper - Buffing unit - Drying box with nitrogen

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: 0-261-96-0637, Equipment: documentation/manual, Feeding and Discharge of Workpieces • Upper pressure belt • Variable feed rate: 8–18 m/min • Front air-cushion table Bedpfxoy Eft Ts Ad Dswl • Automatic infeed fence • Prepared for connection to return system Edge Banding • PUR pre-melter, capacity 2.5 kg/h • Glue pot QA65, quantity: 2 • Support for narrow workpieces • Automatic edge feed Workpiece Finishing • Anti-adhesive and cleaning fluid system • End trimming unit • Edge milling unit with R-2 and R-1 tooling • Flat scraper, top/bottom polishing unit • Multifunctional profile scraper unit with R-2 and R-1 tooling • Corner rounding unit with R2 tool, dual-motor MF50 Documentation • Language options: English, German, Croatian • Format: Data storage medium + paper documentation General Information • Year of manufacture: 2017 • Control system: HOMAG POWERTOUCH group • CE marking: YES • Availability: Ready for collection – April 2026 • Machine length: approx. 6,075 mm

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Bodpfxoy Edqws Ad Dswl Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 4 Nr

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Bedpfx Adsy Edqqo Djwl Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: good (used), Year of construction: 1999, machine/vehicle number: 0-200-21-3286, functionality: fully functional, input voltage: 400 V, input current: 56 A, type of input current: three-phase, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 79/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the right side. Year of Manufacture: 1999 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x3.5kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm Bjdpfx Adjy H Hzbe Dewl - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN11, with auto-revolver positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: - HOMATIC NC21 OPERATING SYSTEM

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, overall weight: 4,000 kg, TECHNICAL DETAILS Overall height: 2,200 mm Overall length: 7,500 mm Overall width: 1,500 mm MACHINE DETAILS Weight: 4,000 kg Bjdpfxey Akyte Ad Djwl Year of manufacture: 2007 Voltage: 400 V Power consumption: 46 A Fuse: 63 A Transport dimensions: 7,500 mm x 1,500 mm x 2,200 mm (L x W x H) Transport weight: 4,000 kg EQUIPMENT Tools included: Yes (for 1st, 3rd, 4th, 5th, 7th, and 8th unit) Tools included: No (for 6th unit)

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003616 - Manufacturer Code: 2-083-02-7120 - Condition: As new (display item) - Functionality: Fully operational - Compatible Machine: - Weight: 2.5 kg - Dimensions: 36x26x21 cm - If interested, we offer an overhaul service; please contact us. Bwedpfxjyz T Tts Ad Djl

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-261-04-6713, functionality: fully functional, operating hours: 6,836 h, input voltage: 400 V, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 18 m/min, actuation type: electric, total height: 2,300 mm, total length: 5,760 mm, total width: 1,555 mm, overall weight: 2,600 kg, Equipment: CE marking, documentation/manual, Single-Sided Edgebander HOMAG Optimat KDF 650 C (Ambition 1650 FC) – AIRTEC, Corner Rounding, powerTouch Basic Information: • Manufacturer: HOMAG • Model: Optimat KDF 650 C (Ambition 1650 FC) • Year of manufacture: 2017 • Condition: Used, fully operational • Location: Skwierzyna, Poland _____ MACHINE DESCRIPTION Professional single-sided edgebander designed for processing straight panel edges, applying various types of edging (tape and solid wood lippings), and complete finishing operations. This machine is a highly equipped configuration featuring, among others, the AirTec AT 15 unit for jointless edging technology, a dual WD 60 Corner Rounding unit, and the advanced powerTouch control system with touchscreen. Full automation and pneumatic adjustment of all processing units via the operator panel. Bedpfx Adjy Ec A Se Dswl TECHNICAL DATA • Feed speed: adjustable 8 – 18 m/min • Max. speed with corner rounding unit: 11 m/min • Working height: 950 mm • Workpiece thickness: 8 – 60 mm • Edging thickness (tape): 0.4 – 3.0 mm • Edging thickness (solid lipping/strip): 0.4 – 12.0 mm • Total machine length: 5,760 mm UNIT CONFIGURATION 1. Pre-milling unit: 2 x 2.2 kW with diamond-tipped heads. 2. Edging application A12: Quickmelt quick-change glue application unit, infrared pre-heating lamp for panel edges. 3. AirTec AT 15 unit: Enables processing of laser/function edging with hot air. Perfect invisible joints, no visible glue line. 4. Edging magazine: automatic for both tapes and strips. 5. Pressure zone: 1 main pneumatically-driven pressure roller + 3 secondary pressure rollers. 6. End trimming unit: 2 motors x 0.35 kW, for straight and angled cuts. 7. Top and bottom trimming unit: 2 x 0.55 kW, contra-rotating DFC cutters with pneumatic adjustment, position set via touchscreen. 8. Corner rounding unit (WD 60): 2 x 0.35 kW multi-function unit for complete corner finishing (3D corners). Adjustment via touchscreen. 9. Profile scraper MZ40: Pneumatically retractable (R1 / R2), settable via touchscreen. 10. Glue joint scraper: For removing excess glue (finished surface quality). 11. Buffing unit: 2 motors x 0.18 kW. CONTROL SYSTEM • powerTouch: modern control panel with 21.5" Full-HD touchscreen. • Intuitive graphical interface, production data logging (piece count, time, edging consumption). • Network capability (Ethernet connectivity). _____ Additional information for buyer: • Machine comes from official Polish distribution (HOMAG Poland). • Complete technical documentation included. • Possibility to inspect the machine during operation.

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 1-056-09-3351 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8 kg - Dimensions: 46x39x27 cm - If interested, we offer an overhaul service. Please contact us. Bedpfjyztt Hjx Ad Dswl

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 2-056-10-0220 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 6KG - Dimensions: 36X26X21 - If interested, we offer an overhaul service; please contact us. Bwodpfx Ajyztr Ajd Dol

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, input voltage: 415 V, Equipment: CE marking, documentation/manual, Homag BHX 050Cnc router boring machine centre Bodpfx Asytfkmjd Djwl

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Bodpswuuc Asfx Ad Dewl

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Bwodeu T Tt Tspfx Ad Dol Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Bwsdpfx Ajxvy Ukjd Djl Warranty: Without any warranty

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Bjdpfx Adex Swgfo Dowl Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 70004, functionality: fully functional, Equipment: CE marking, Technical Specifications Dimensions - length: 9.8 m Bwsdpfx Aoyzc Iged Dol - width: 1.5 m - height: 1.8 m Motor power: 40 kW Equipment - feed speed: 6 - 30 m/min - panel thickness: min. 8 mm, max. 60 mm - panel width (including edge): min. 65 mm (with edge thickness 0.4 - 3 mm) - panel length: min. 150 mm - edge height: min. 14 mm, max. 65 mm - edge thickness: min. 0.4 mm, max. 20 mm

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Bwjdpsyywcvsfx Ad Dsl Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)