Used Homag Panel Saw for sale (481)

Condition: used, Year of construction: 2011, machine/vehicle number: 0-201-50-1289, operating hours: 7,062 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,400 mm, controller model: POWERCONTROL PC 85, plate height: 300 mm, spindle speed (max.): 24,000 rpm, CNC machining center for milling, drilling, and edge banding! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel passage height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of working stations: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total number of vertical + horizontal spindles: 25 Number of milling spindles: 2 Total number of tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Flow rate of vacuum pump: 300 m³/h Positioning via NC Vacuum suction cups for workpiece clamping Gkodpjy Uviwsfx Ap Dec Positioning of vacuum suction cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Total number of vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes milling spindle 1: 5 Motor power milling spindle 1: 15 kW Speed milling spindle 1: 24,000 rpm Automatic tool change Milling spindle 2: Top Number of controlled axes milling spindle 2: 4 Automatic tool change milling spindle 2: Yes Motor power milling spindle 2: 11 kW Speed milling spindle 2: 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Positioning: Mounted on the main beam of the machine Number of positions edge band roll magazine: 2 Gluing unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Tool magazines Number of tool magazines: 4 Positions tool magazine 1: 72 Position tool magazine 1: At the rear of the machine Positions tool magazine 2: 2 Position tool magazine 2: At the rear of the machine Positions tool magazine 3: 2 Position tool magazine 3: At the rear of the machine Positions tool magazine 4: 1 Use tool magazine 4: Only for saw unit D: 350 mm MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Work table pod and rail NC-positioned workpiece clamping Vacuum suction cups Vacuum pump Drilling unit on top 2 milling spindles POWER EDGE 360° edge banding unit Glue tank for hot melt adhesive Pre-melter for hot melt adhesive Edge band roll magazine 4 tool magazines Barcode reader DATALOGIC Protective screen Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8527

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 0-201-09-5124, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump Godpsydl Nwsfx Ap Djkc

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool changer with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Mill Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Gkodpfx Aeytr Hbjp Djc Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial data. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and use of the machine at the destination. External reference: 6216

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,550 mm, workpiece height (max.): 40 mm, number of spindles: 30, travel speed (max.): 80,000 mm/min, TECHNICAL DETAILS Travel range X-axis: 4,175 mm Travel range Y-axis: 1,550 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Maximum workpiece height: 40 mm Number of suction traverse beams: 8 Spindles Number of spindles for vertical drilling: 20 Number of spindles for horizontal drilling in X-direction: 10 Total number of spindles: 30 Gkjdpfeyttcwjx Ap Dec Milling unit Number of controlled axes: 4 + Flex5 Motor power: 15 kW Automatic tool changer Liquid-cooled Saw unit Tool magazine 1 Number of slots: 18 Tool magazine 2 Number of slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and milling cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for installation, securing, and usage of the machine at the destination. External reference: 7350

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Gkjdoywxraspfx Ap Dsc Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit Gksdpfx Aozdzmkop Dec MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 0-200-03-9040, functionality: fully functional, edge thickness (max.): 20 mm, feed rate X-axis: 18 m/min, year of last overhaul: 2025, The machine underwent a complete overhaul on November 10, 2025, and was fitted with two new adhesive tanks. The machine has been serviced annually; in 2023, the software and computer system were completely replaced. The machine is equipped with the following units: Gluing/pre-coating unit Pressing zone Godpfxjzap H So Ap Dskc Cutting unit (HL) Milling unit (MFL) Profiling unit (PN) Polishing unit (SM) Gluing system FE-MA-TECH Advanced PUR 2 kg TECHNICAL DETAILS Feed speed: 18 m/min Panel thickness: 10 - 60 mm Edge thickness: 0.3 - 20 mm MACHINE DETAILS Gluing system: FE-MA-TECH Advanced PUR 2 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No Gkjdpfx Ajy Tnuvjp Djc CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: new, BENZ HSK TILTING AGGREGATE DRILLING HEAD MILLING CUTTER Gkjdpfjzq Dgaex Ap Dsc

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-43-0070, functionality: fully functional, operating hours: 2,731 h, power: 10 kW (13.60 HP), input voltage: 300 V, input current: 32 A, year of last overhaul: 2026, Equipment: documentation/manual, 3-AXIS (X-Y-Z) CNC MACHINING CENTER Movable table (workpiece), movable machining head Vertical table (workpiece) Cec Ard Uoyywcvspnjrd Control system: POWERCONTROL + POWERTOUCH Software: woodWOP Gkodjzi Ul Rjpfx Ap Doc Safety cabin for the machining head No. 1 locking system for workpiece clamps in the working area Workpiece drive with transport chain Minimum workpiece dimensions (X-Y-Z) mm 200 x 70 x 12 Maximum workpiece dimensions (X-Y-Z) mm 3050 x 850 x 60 Total connected power (kW): approx. 11.5 WORKING GROUPS: No. 1 drilling unit (Power (kW) 2.3) with vertical spindles: - No. 13 independent vertical drilling spindles (V13 High Speed) - No. 6 independent horizontal drilling spindles (4 in X + 2 in Y) No. 1 grooving saw unit (for operations in the X-axis) diameter (mm) 100 No. 1 vertical main spindle (milling unit) HKS63 (Power kW 5) Automatic tool changing system - magazine positions (No. 4 tool positions)

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: pivoting -Engine: 2 x Perske DVMS 903/2 -Power: 0.4 kW -Frequency: 200 Hz Gsdsvyz Hgopfx Ap Dekc -Speed: 12000 rpm -Number: 1x milling unit available -Dimensions: 490/370/H610 mm -Weight: 53 kg

Condition: good (used), Aggregate kit, format processing unit, chipping unit, milling unit, form milling unit, jointing milling unit, trimming unit, double-end tenoner, edge processing machine, scoring motor, chipping motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motor -Milling unit: with guide -Engine: Perske VS 31.09-2 Gedpfx Ajvy Ah Eop Dekc -Power: 0.4 kW -Frequency: 200 Hz -Speed: 11300 rpm -Number: 2x milling unit available -Price: per piece -Dimensions: 600/360/H310 mm -Weight: 20 kg/piece

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, milling unit for edge processing machines with Perske motors -Milling units: with guide -Engines: 2x Perske VS 40.09/2 -Power: 0.26 kW -Voltage 220/380 V 50 Hz Gedpfx Apsvy Tuce Dekc -Speed: 2660 rpm -Quantity: 1x milling unit available -Dimensions: 750/270/H300 mm -Weight: 40 kg

Year of construction: 2010, condition: like new (used), I sell the radius copy milling aggregate for edges suitable for CNC working centres with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12.000 rpm. Radius R2mm. HSK63 holder. Available immediately. Gsdpohw Db Iefx Ap Djkc

Condition: used, Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -Finishing unit: from BRANDT KM 36 edge banding machine -Motor: 0.18 kW Gkodpfx Aogx Am Iep Doc -side: adjustable -Height: adjustable -Number: 2x aggregates available -Speed: 1x 1360 rpm, 1x 1250 rpm -Price per piece -Dimensions: 260/370 / H510 mm / 260/370 / H480 mm -Weight: 22 kg / pc.

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, profile holder edge banding machine -Manufacturer: Homag, profile holder from edge banding machine BRANDT KM 35 -Individual components: see photos -Dimensions: 665/540 / H375 mm -Weight: 30 kg Gkjdpfxogy T Nbj Ap Djc

Condition: used, Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -Finishing unit: from BRANDT KM 35 edge banding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm -side: adjustable -Height: adjustable -Dimensions: 350/230 / H415 mm -Weight: 20 kg Gksdpfxegy T Nfe Ap Djc

Condition: good (used), Tax cards -Replacement cards for: -Homag Type: KFL 53 -Homag Type: KFL 54 -Homag entrance cards -Homag control cards Gkjdpfx Apsb A Nf Tj Dec -Homag controller cards -Cabinet: only sold as a complete unit -Weight: 200 kg

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Gjdpskbx Eaefx Ap Dekc Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. grooving aggregate with jump for softforming function Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 1998, Double end tenoner Homag 4+4 motors Opening side 2500 mm Feeding speed 4-24 m/min. Perfect for panels, windows, furniture Gksdporcbccefx Ap Doc

Condition: used, Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm Gjdpsrp Ikvefx Ap Dekc -Dimensions: 380/75/H160 mm -Weight: 8kg

Condition: used, Linear drive, linear gear, screw jack, spindle drive -comes from a Homag edge banding machine -difficult execution -Adjustment path: 100 mm Gkedpob R Iulofx Ap Doc -Number: 2 pieces available -Price: complete for 2 pieces -Dimensions: 250/230/H800 mm/piece -Weight: 66 kg/piece

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x Perske motors -Engine type: KCS 70.12-2D -Power: 2.7/4.5 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz Godpjb R Ua Nefx Ap Djkc -Speed: 2860/5860 rpm -Other engines with different performance levels are available from us for an additional charge. -Dimensions: 1060/660/H1010 mm -Weight: 326 kg

Condition: good (used), Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG cutting unit for cutting off edge protrusions on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x Perske engines -Engine Type: -Power: 0.22 kW -Voltage: Volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with different performance levels are available from us for an additional charge. Gsdpfx Apob Sab He Dokc -Dimensions: 1240/600/H1100 mm -Weight: 296 kg

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with oscillation -Swiveling -side: adjustable -height: adjustable Gedpfsb Sc Sxjx Ap Dskc -Number: 4x units available -Price: per piece -Dimensions: 580/350/H460 mm -Weight: 28 kg