Used Honer Exact for sale (557)

Condition: good (used), mileage: 4,50,000 km, Year of construction: 2008, Equipment: crane, 4-axle 320ptt truck, set up with MEC/BTE SC266XXL series unloading rig, payload capacity 16150kg, MEC series crane CL140.83.1Z1 with hydraulic polyp, manual ZF gearbox, towable, wheelbase 4500mm, euro 5 regulation. N.B. Please note that the vehicle description is to be considered indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the exact correspondence of the data. Lodjr Ncckopfx Abcohd

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single axle. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Ledpfx Asykxmpjbcshd Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 62 kg, warranty duration: 12 months, TRUVOX ORBIS OCB 451500 FLOOR POLISHER 1500 RPM Lhsdpjyf Dtdefx Abcjd NEW SONNENSCHEIN 12V 50Ah BATTERIES (2x) The 430mm cleaning head is equipped with a new, soft pad, ideal for polishing all types of surfaces. The built-in charger simplifies everyday use. High maneuverability thanks to its compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are buying the exact device you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 430 Rotation speed (rpm/min): 1500 Power supply: battery-powered Weight (kg): 62 Dimensions (L x W x H - mm): 700x450x860 INCLUDED: NEW SONNENSCHEIN 12V 50Ah BATTERIES (2x) NEW 430mm cleaning pad - white Built-in charger Center-lock handle 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage A clearly legible and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 62 kg, tank capacity: 12 l, TRUVOX ORBIS OCB 451500 FLOOR POLISHER 1500 RPM NEW SONNENSCHEIN 12V 50Ah BATTERIES (2x) The 430mm cleaning head is equipped with a new, soft pad, ideal for polishing all types of surfaces. The built-in charger simplifies everyday use. High maneuverability thanks to its compact size. The centrally located, powerful motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. You are buying the exact device you see in the photos. Other models are available in our other auctions, which we encourage you to check out. TECHNICAL DATA: Working width (mm): 430 Rotation speed (rpm/min): 1500 Power supply: battery-powered Weight (kg): 62 Ljdpfx Aoyf Dltobcshd Dimensions (L x W x H - mm): 700x450x860 INCLUDED: NEW SONNENSCHEIN 12V 50Ah BATTERIES (2x) NEW 430mm cleaning pad - white Built-in charger Center-lock handle 5 liters of TENZI NORMAL cleaning fluid - FREE KEY FEATURES: Thanks to its design, the machine is highly maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface coverage A clearly legible and intuitive control panel.

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 100 L/h Ledsv Srabjpfx Abcehd Power requirement: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. • Very user-friendly Lhodpfx Abov Srblscjd • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Height: 880 mm Weight: 130 kg

Condition: good (used), Technical Specifications for the Pallet Racking System: Racking System: Mecalux Technical Specifications for Installation: Number of rack rows: 01 unit Length per rack row: 17,625 mm Number of bays per rack row: 09 units Number of levels plus ground level: 02 units Volume Specifications: Pallet spaces per bay: 06 units Number of pallet spaces per row: 54 units Total number of pallet spaces: 54 units Lhedpfjvzappex Abcod Included in scope of delivery: 10x pallet rack uprights, used Material finish: sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Including horizontal and diagonal bracing, base plates Uprights are pre-assembled (bolted lattice work) 2,000 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box section profile: 100 x 50 mm Clear width: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 72x integrated safety pins, new For securing the longitudinal beams against unintentional lifting 40x wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 20x leveling plates, used Version: fully galvanized For leveling the rack uprights installed on uneven floors 01x load capacity sign with field and compartment load details, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping is required, this will incur additional costs. Please enquire with us for exact costs, which vary depending on delivery location and scope.

Condition: reconditioned (used), functionality: fully functional, working width: 430 mm, overall weight: 62 kg, warranty duration: 12 months, TRUVOX ORBIS OCB 451500 FLOOR POLISHER 1500 RPM NEW SONNENSCHEIN 12V 50Ah BATTERIES (2x) The 430mm cleaning head is equipped with a new, soft pad, ideal for polishing all types of surfaces. The built-in charger simplifies everyday use. High maneuverability thanks to its compact size. The powerful centrally located motor ensures uniform pressure and significantly simplifies operation. Perfect for small spaces where easy maneuverability is essential. This makes the machine suitable for use in places such as car showrooms, boutiques, museums, hotels, restaurants, offices, public buildings, and many others. Ljdjyfuc Nspfx Abcshd You are buying the exact device you see in the photos. Other models are available in our other auctions, to which we cordially invite you to view them. PRICE: PLN 3,000 net PLN 3,690 gross TECHNICAL DATA: Working width (mm): 430 Rotation speed (rpm/min): 1500 Power supply: battery Weight (kg): 62 Dimensions (L x W x H - mm): 700x450x860 INCLUDED: NEW SONNENSCHEIN 12V 50Ah BATTERIES (2x) NEW 430mm cleaning pad - white Built-in charger Center lock handle TENZI NORMAL 5-liter fluid - FREE KEY FEATURES: Thanks to its design, the machine is very maneuverable. The small turning radius allows operation even in narrow passages and alleys. The large working width (430mm) ensures high surface efficiency. The control panel is very clear and intuitive to use.

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. Lhjdpjx Hwhxsfx Abcsd These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: No - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - Type milling table: Beam table - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1550 - Z-axis working range [mm]: 160 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). Ljdpfoibx S Nex Abcshd St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Year of construction: 2005, condition: ready for operation (used), Two identical CNC lathes Mori Seiki are available. Turning diameter: 356mm, max. machining length: 705mm, travel X/Z: 260mm/795mm, speed: 4000rpm, spindle bore: 91mm, spindle power: 18.5kW, tool positions: 12. Machine dimensions X/Y/Z: approx. 2800mm/1900mm/2150mm, weight: approx. 6000kg, control: Mitsubishi/Fanuc. The operating hours have a maximum display value of 9999h, therefore the exact runtime cannot be determined. Documentation available. An on-site inspection is possible. Lhjdpoxph Raefx Abced

Condition: used, mileage: 5,62,000 km, power: 213 kW (289.60 HP), first registration: 03/2010, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 11/2026, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN A 78 with 41 seats - Air conditioning - Automatic transmission - LED text display system - Euro 5 EEV - 100 km/h - Seat belts at every seat - Lhjdpfxsx In S Ds Abcod * Diesel - 6,871 cm³ - 213 kW - 290 HP - Euro 5 EEV - Green emissions sticker - TÜV valid until 11/2026 - * 41 passenger seats + 1 driver seat + 1 wheelchair space with manual wheelchair ramp - * Auxiliary heater / Radio / ABS / ASR - Double-width rear door - Single front door - * Vehicle dimensions: Length: 11,857 mm x Width: 2,550 mm x Height: 3,174 mm * German vehicle - German registration certificate - Sale on behalf of customer - * Errors / misprints & intermediate sale reserved - available immediately - * Please schedule an appointment for viewing & test drive * Contact: Andreas Vogel * ATTENTION - Vehicles are stored offsite - Please inquire exact location - ATTENTION -

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 10,322 h, load capacity: 1,600 kg, lifting height: 3,200 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,210 mm, fork length: 1,150 mm, drive type: Elektro, Electric 3-Wheel Forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Duplex Condition: Refurbished without warranty Technical Condition: Good Description: Truck type: Electric 3-wheel forklift, Manufacturer: Jungheinrich, Model: counterbalance forklift, Year of manufacture: 2009, Operating hours: approx. 10,500, Drive: electric, Battery: replaced in 2017, Battery condition: visual condition unknown (according to entry, battery from 2017), Charger available on request, Load capacity: approx. 1.6 t (please refer to the data plate for the exact capacity), Mast: duplex high-lift mast with fork carriage, Tyres: rubber, Colour: yellow/black, Bodywork with signs of use. Features: Overhead guard, beacon, hydraulic lift and lowering functions, rear steering angle. Condition: Used warehouse forklift, visibly heavy signs of use Application: Indoor and warehouse operation, pallet handling, loading and unloading Subject to errors and prior sale. Sale only to commercial customers. All sales of used equipment are made with exclusion of warranty or guarantee. If you have not found your forklift, please contact us. We have a large selection of further equipment on site. Lhedpfeykcrijx Abcjd Side shifter,

Condition: new, empty load weight: 480 kg, maximum load weight: 820 kg, overall weight: 1,300 kg, loading space length: 2,510 mm, loading space width: 1,530 mm, tire size: 195/50r13c, Lowering trailer from trailer manufacturer STEMA model WOM XT - STS XT O2 Lhedpofr Uxbefx Abcod A Senkomat or lowering lift trailer is often purchased by motorcyclists. It is well suited for one or two motorcycles, but also for quad bikes, ATVs, lawn mowers and small machines. A three-sided perforated railing and a perforated profile in the middle of the floor secure the load. The trailer is lowered using a manual hydraulic system. The car trailer is characterized by its user-friendliness and stability. The standard equipment of the lowerable car trailer includes the three-sided perforated railing, lashing profile in the middle of the floor, support wheel, fold-down license plate holder, manual hydraulics, sturdy welded hot-dip galvanized frame and a V-drawbar. The exact equipment and technical details can be found below. As accessories we have motorcycle rockers, motorcycle stand rails, tarpaulin and frame, side wall attachment, 100 km/h damper and TÜV, tool box, motorcycle lashing straps, lashing straps and trailer lock.

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Ljdpfx Aeyh Smbobcjhd Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: new, mileage: 50 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 330 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, FMX 540 6x2 chassis CHH-MED, NLA hydraulically steered, single bed. Use for good roads Distribution traffic Topography predominantly flat Ambient temperature up to +40°C, at more than +40°C max. 25 h/year Ambient temperature down to -25°C, below -25°C max. 25 h/year Center of gravity height (body and load) approx. 0.5 - 1 m above the top edge of the frame Clean roads, max. 10% dirty Flatbed chassis without preparations Total train weight, technical: 60 t (note the towing capacity of the trailer hitch!) Ledpfjyh Sl Rjx Abcehd Vehicle for special bodies Vehicle for crane behind the driver's cab Rearview mirror for body width 2600 mm Main components New model Chassis height: MED (medium), exact height dimensions can be found in VBI/WIS Electrohydraulically steered trailing axle, single tires Safety long-distance driver's cab FMX Wheelbase 3200 mm Exhaust emissions according to Euro 6 Stage E, with SCR, particle filter and exhaust gas recirculation Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm Engine brake Volvo Engine Brake+ (VEB+). Braking power 510 hp/375 kW (D13K) Meets ADR braking regulations. I-Shift AT2612F, automated 12-speed gearbox (direct gear), max. input torque: 2,652 Nm Liftable axle Rear axle RSS1370A, single gear, 13 t axle load, GZG 70 t AA tires 315/80R22.5 Drive axle ratio 3.08:1 Diesel fuel Equipment packages Driver comfort package Central locking with remote control on the key Two armrests on the driver's seat Air conditioning with automatic temperature control and sun sensor Armrests covered with vinyl Roof window and emergency exit, can be opened manually (tinted glass) Info and media package with navigation Radio reception: AM/FM (analog) USB connection Construction: ? Fifth wheel plate with sliding device and self-lubricating (type Jost JSK), mounted on the subframe ? Covering the front support with FASSI LOGO (lasered/smooth steel sheet) ? Rear view camera fully installed. Assembly: ? Carrying out all chassis work required for the crane assembly, dismantling and assembling add-on parts, exhaust system, tanks, etc. Adjusting the vehicle frame. ? All chassis and assembly work complies with the assembly guidelines of the respective chassis manufacturer and is therefore carried out to the highest quality. ? Complete assembly of the special subframe made of fine-grain steel, developed in-house and produced in-house, for the crane and body. The subframe, which is welded and bolted to the chassis frame, guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. It is manufactured to the highest quality and painted in the frame color. ? Assembly/screwing of the crane and main support beam to the subframe. Installation of all hydraulic and electrical connections. Installation location: front ? Platform design as a steel/welded construction, removable ? Length approx. 330 cm, width approx. 248 cm. ? Platform body painted. Color RAL (chassis color) ? Removable aluminum side walls, made by Suer, height 600 mm, anodized version with steps, stanchions, removable chin grip. ? Standard platform floor with welded steel checker plate 4 mm painted in RAL (chassis color) ? 6 retractable lashing eyes 2000 daN per side, in perforated profile with flexible arrangement. ? 4 x lashing brackets for chains 6500 daN (2x at the front and 2x at the back of the body) ? Stable front wall consisting of welded frame, welded steel sheet 4mm and 5x accessory hooks, front wall height

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), first registration: 11/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ? Retarder Air suspension rear, 4 air bellows ? Aero Globetrotter XL safety cab FH ? Wheelbase 3,700 mm ? Emissions according to Euro 6 with SCR, particulate filter and EGR ? Euro 6 emission class EM-EU6 ? I-Torque: efficiency-optimized cruise control with torque management, incl. IRoll & brake cruise control ? Aero/spoiler package ? Roof spoiler. The exact configuration is calculated automatically depending on chassis height, cab, tires, etc. (Please note the planned body height!). ? Side underrun protection, foldable and removable ? Driver Comfort Package Selected ? Static LED cornering lights ? Roof window and emergency exit, manually operable (tinted glass) ? Rain sensor (sensor-controlled wipers) ? Steering wheel adjustment for height and tilt, with additional steering column adjustment ? Living package FH, two beds ? Upper bunk 700x1900 mm, foldable and height adjustable, with safety net ? Lower bunk, foldable, 2000x815/740/660 mm (center, upper, lower) with safety net ? Cab auxiliary heater, 2 kW ? Refrigerator with freezer compartment 33 L ? Interior lighting with dimmer and red night light ? Info and Media Package High ? EBS, Electronic Braking System, Medium Package ? Rear air suspension ? 365 L aluminum tank right, D-shape, 710 mm high ? 610 L aluminum tank left, D-shape, 710 mm high, 1530 mm long ? Marker lights at the rear and on the side (with indicator function) ? Rear connection for trailer/semitrailer, 2x7-pin ? Trailer/semitrailer connection according to EU standard ? Lift function for trailer axles ? LED rear lights ? Brake lights with emergency brake flash function ? I-Shift drive modes: Standard, Performance, and Economy ? I-See with map-based topography and traffic data (high resolution) ? Instrument cluster High with digital, fully dynamic driver information display, 4 selectable views, with traffic sign recognition (in conjunction with lane departure warning). Size: 12 inch with chrome trim ? Digital tachograph, generation 4 ? Speed limiter 90 km/h ? Adaptive cruise control (ACC) with collision warning and emergency braking ? Lane keeping assistant ? Side collision avoidance and turn assist (both sides) ? Radio reception: AM/FM and DAB/DAB+ (analog & digital) ? Reversing monitor/camera ? Side sun visor, driver's side ? Internal sun blind, manual roller ? With writing board for the steering wheel ? Assistance and emergency call service with voice channel ? Comfort driver's seat, air-suspended, heated, seatbelt integrated ? Comfort foam mattress for lower bunk, firm ? Premium mattress topper (30 mm) ? Curtains for windshield and windows ? I-Park Cool (integrated parking air conditioning with automatic temperature control) ? Control console (luxury) at bunk (interior lights, auxiliary heater/AC, roof hatch, door lock, alarm clock, window lifter, and radio) ? Storage compartments above bunk, capacity: 245 ? Two flexible reading lamps Lhedpfx Ajyhx U Sebcsd ? Tinted windows ? Reinforced cab insulation ? Vehicle overall height max. 4.0 m ? Cab paint Arctic White, DB9147 ? Bumper with spoiler ? Lockable front panel via central locking ? Camera monitor system (CMS) with close-range camera on co-driver side ? Front mirror ? LED main headlights ? Automatic switching between daytime running lights and low beam via light sensor ? Headlamp cleaning system ? Automatic headlight leveling ? LED daytime running lights, 'V-light' ? LED front fog lights ? Jericho horn / air horn (single, front mounted) ? Roof antenna and CB radio preparation

Condition: new, power: 309 kW (420.12 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 32,000 kg, empty load weight: 13,050 kg, maximum load weight: 18,950 kg, tire size: 315/80R22.5, axle configuration: 8x4, number of seats: 2, emission class: euro6, brakes: engine braking, suspension: steel, driver cabin: day cab, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: in transit, registered as a house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, raised exhaust, automatic, differential lock, fog lights, leaf suspension, aluminum tank, 2nd axle steered, underbody protection, roof hatch, green environmental badge Body: Karrena 9/10m³ concrete mixer. Exact equipment slightly different from the pictures! Can be sent upon request! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, intermediate sale, and errors! Lhjdpfxjv Sdkle Abced - .

Condition: used, mileage: 2,54,732 km, power: 353 kW (479.95 HP), first registration: 06/2022, fuel type: diesel, overall weight: 40,000 kg, gearing type: automatic, Equipment: soot filter, Vehicle number: 253519 1st owner, accident-free, full service history, non-smoker ---- ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) EXTERIOR * External sun visor OTHER EQUIPMENT * ZF Intarder Additional Features * Rear overhang: 0.99 m * Front underrun protection * Splash guards * Work lights, LED * Rear lights with LEDs * Longitudinal members 260/6.0 mm, without internal reinforcement * ks: 765 step left +340 right, H 620 mm * Axle load monitoring * Body connector on chassis * Mains connection * Automatic cab climate control * Refrigerator and drawer * Accessory power supply: standard + 2x 40 A * Luxury LED interior lighting * Automated gearbox, TraXon, 12-speed * Rear axle ratio 2.21 * Mechanical differential lock * MX-13 engine, 355 kW / 483 HP, cab badge: 480 * Adaptive cruise control with FCW and AEBS-3 * Sleeper High Cab * Two LED spotlights for cab rear wall * Headlight beam pattern for right-hand traffic * LED skylights * LED headlamps, cornering and fog lights * Kingpin diameter 2 inches * Kingpin offset 670 mm * JOST JSK37C, cast iron, 150 + 12 mm * Electrical connections trailer 24V/2x7-pin cables: 2x7-pin + EBS Ledox Ibgnspfx Abcohd * Compressor 2 cylinders without clutch * Battery power monitoring * Alternator 110 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors excepted. The vehicle description serves solely for general identification of the vehicle and does not constitute a warranty in the context of commercial law. The exact equipment details can be obtained from our sales staff. Please contact us.

Condition: used, mileage: 2,87,315 km, power: 353 kW (479.95 HP), first registration: 05/2022, fuel type: diesel, overall weight: 40,000 kg, gearing type: automatic, Equipment: soot filter, Vehicle number: 253518 1st owner, accident-free, full service history, non-smoker ---- DRIVER ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control (ASR) OTHER EQUIPMENT * ZF Intarder Further features * Rear overhang: 0.99 m * Front underrun protection * Splash guards * LED work lights * LED rear lights * Longitudinal frame members 260/6.0 mm, without inner reinforcement * Axle load monitoring * Stabilink rear axle suspension * Front leaf suspension: standard * Electrically operated roof hatch * Automatic cab climate control * Accessory power supply: standard + 2x 40 A * Luxury LED interior lighting * Auxiliary heater with waste heat pump and timer * Rear axle ratio 2.21 * Mechanical differential lock * 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 * MX-13 engine, 355kW/483hp cab badge: 480 * Adaptive cruise control with FCW and AEBS-3 * Sleeper high cab * Two LED spotlights for rear cab wall * Headlights for right-hand traffic * LED skylights * LED headlamps, cornering and fog lights Lhsdpfox Ibhfjx Abcsd * Fifth wheel pin diameter: 2 inches * Fifth wheel offset (KA): 670 mm * Pneumatic trailer connection, rotary coupling * JOST JSK37C, cast iron, 150 + 12 mm * Electrical trailer connection 24V/2x7 pin cable: 2x7-pin + EBS * Electronic stability control (VSC) * Battery energy monitoring * Alternator 110 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors. The vehicle description serves only for general identification and does not constitute a warranty in the sense of sales law. For the exact scope of equipment, please contact our sales staff. Please get in touch with us.

Condition: used, mileage: 2,76,984 km, power: 353 kW (479.95 HP), first registration: 08/2022, fuel type: diesel, overall weight: 40,000 kg, gearing type: automatic, Equipment: soot filter, Vehicle number: 253522 1 owner, accident-free, service book maintained, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system ENGINE, TRANSMISSION & CHASSIS * Traction control system (ASR) EXTERIOR * External sun visor OTHER EQUIPMENT * ZF Intarder Additional Features * Sleeper High Cab * Two LED headlights for cab rear wall * Headlights adjusted for right-hand traffic * LED skylights * LED headlights, cornering and fog lights * Adaptive cruise control with FCW and AEBS-3 * Electrically operated roof hatch * Automatic cab climate control * Refrigerator and drawer * Dashboard table * Accessory power supply: standard + 2x 40 A * Luxury LED interior lighting * Auxiliary heater with waste heat pump and timer * Heated fuel pre-filter * Automated gearbox, TraXon, 12 speeds * Rear axle ratio 2.21 * Mechanical differential lock * MX-13 engine, 355kW/483hp, cab badge: 480 * Axle load monitoring * Electronic stability control (VSC) * Standard immobilizer * Wheelbase 3.80 m / rear overhang 0.99 m * Front underrun protection Lhodpfx Abox Ibg Uecod * Splash protection * LED work lights * LED tail lights * Frame rails 260/6.0 mm, without inner reinforcements * Kingpin diameter 2 inches * Fifth wheel lead 670 mm * Pneumatic connection for trailer, turntable coupling * JOST JSK37C, cast iron, 150 + 12 mm * Electrical connection for trailer, 24V/2x7-pin cables: 2x7-pin + EBS * Battery energy monitoring * Alternator 110 A, batteries 2 x 210 Ah AGM ---- Subject to prior sale and errors. The vehicle description serves only for general identification of the vehicle and does not constitute a warranty in the legal sense. The exact equipment details will be provided by our sales staff. Please contact us.

Condition: new, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm capacity 90 degrees: flat 700 x 410 mm capacity 45 degrees: round 410 mm capacity 45 degrees: flat 500 x 410 mm capacity 45 degrees: round links 410 mm capacity 45 degrees: flat links 430 x 410 mm capacity 30 degrees: round 320 capacity 30 degrees: flat 320 x 410 15 - 150 m/min workpiece weight max. 250 kg/m kg 5,5 kW 3200 kg 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneering electric saw feed with ball screw: - highest cutting performance and quality, while being gentle on the saw band - Consistent use of the most modern recirculating ball bearing systems: - smooth-running, highly resilient, low-maintenance and play-free - Unique and patented double miter system: - Material is always clamped at right angles Furnishing: - Automatic cutting pressure and feed monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic material full stroke clamping - Automatic movement of the vices - Saw frame height adjustment automatically Lodpfx Aox Sr Drebcshd - Minimum speed and saw band monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA pliers insertion system from 5-2300 mm per stroke with integrated roller conveyor *Special equipment: - Laser light for cutting line display/marking saws - Chip brush driven - Micro dosing system - Clamping pressure regulation - Material bundle tension - Job menu - Material database - Zero stop - Scraper belt conveyor for optimal chip disposal, 2000 mm long - Cutting progress control

Condition: used, mileage: 4,50,000 km, power: 309 kW (420.12 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,250 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro4, suspension: air, number of seats: 2, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 2,350 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, spoiler, tail-lift, traction control, Vehicle location: Bovenden, Lg. house, 1x comfort seat, 1x couch, seat heating, electric mirror, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heating, ABS (anti-lock braking system), traction control (ASR), constant throttle, roof spoiler, lift+lower, differential lock, fog lights, storage box, air suspension, aluminum tank, low-noise G1, last axle liftable, U-protection, alu tail lift, upright, environmental sticker green Aluminum tail lift, upright, green environmental sticker Wheelbase: 5250 mm Body: Insulated box body with 2t tail lift Hiab Zepro Z200-175 with radio The exact mileage cannot be determined as the tachograph is defective! A used engine costs approx. 8.000,00€ net! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Lhjdpfx Ajvhlhksbcjd - .

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley Lsdow Uvv Aspfx Abcohd -Type: unfortunately no exact type designation -Wheel: Rail width intermediate dimension 52 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1 piece available -Dimensions: 220/123/H160 mm -Weight: 9 kg

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos Lhsdew Uy Uijpfx Abcsd -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg