Used Horizontal Multirip for sale (6,506)

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Hodpfxs Aax U Is Airow Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: excellent (used), Year of construction: 2012, Horizontal conveyor 2500x410 mm year 2012 price: € 1,750.00 contact: Mr. Rainer Eckerle Hjdpfx Aijznb Ebsrjw

Condition: good (used), Year of construction: 1992, machine/vehicle number: 43817, Offer 26319 Technical data: - Cutting range at 90° (round): 50 to 420 mm - Cutting range (square): 420 x 420 mm - Saw band dimensions (approx.): 6280 x 38 x 1.3 mm - 6 cutting speeds: 16 x 105 m/min Hodpfxj Agvk Ss Airow - Cutting pressure, continuously adjustable: 0 - 400 mm/min - Hydraulic material clamping - Material feed automation: 8 - 520 mm - Multi-stroke up to: 2080 mm - Minimum remaining piece length: 70 mm - Pre-selection of the saw band stroke height - Chip conveyor - Coolant system - Total drive power: 400 V / 7.5 kW - Space requirement (approx.): W 2900 x H 2700 x D 2400 mm - Weight (approx.): 2900 kg - Motorized feed roller runs: 3 x 2000 mm - Total weight of roller runs (approx.): 1200 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, CNC horizontal machining center with pallet changer DECKEL MAHO DMC 55 H duoBLOCK Year of manufacture: 2008 Control system: Siemens Sinumerik 840D Machine type: CNC horizontal machining center Number of axes: 4 (X, Y, Z, B) Spindle hours: approx. 46,000 h Travel distances X-axis: 560 mm Y-axis: 600 mm Z-axis: 600 mm B-axis: 360° NC rotary table Rapid traverse X/Y/Z: 40 m/min Positioning accuracy according to manufacturer: ± 0.003 mm Repeatability accuracy according to manufacturer: ± 0.001 mm Main spindle Spindle speed: 12,000 rpm Tool holder: HSK-A63 Spindle power: 20 kW (40% duty cycle, standard version according to manufacturer) Spindle torque: 110 Nm (standard version according to manufacturer) Tool changer Hodpfs Agn H Ujx Airow Tool magazine: 40 tool positions Tool holder: HSK-A63 Maximum tool diameter: 80 mm Maximum tool diameter with free adjacent positions: 160 mm Maximum tool length: 330 mm Automatic tool change Work table and pallet changer Automatic 2-position pallet changer Pallet dimensions: 400 × 400 mm Maximum pallet load: 500 kg Maximum workpiece height: 850 mm NC rotary table with 360° B-axis Equipment Siemens Sinumerik 840D CNC control system HSK-A63 main spindle with 12,000 rpm 40-position tool magazine Automatic 2-position pallet changer NC rotary table / B-axis Internal cooling (IKZ) Chip conveyor Measuring probe Coolant system Electrical connection data Mains connection: 400 V / 50 Hz Connected power: approx. 58 kVA Maximum fuse rating: approx. 100 A Dimensions and weight Length: approx. 5,000 mm Width: approx. 3,000 mm Height: approx. 2,800 mm Machine weight: approx. 11,000–13,000 kg The machine has been regularly maintained. All hydraulic and air hoses have been replaced. Emergency stop switch on the control panel is defective. Clamping devices and tool holders are not included.

Condition: used, Year of construction: 2021, x-travel 1400 mm y-travel 1200 mm z-travel 1400 mm control Sinumerik 840 D sl Siemens tool taper HSK- A 100 no. of tools in the magazine 117 Stück size of pallet 1.000 x 800 mm numbers of pallets 2 rapid traverse 50 m/min table rotating 360.000 x 0,001 B-Achse ° table load 2200 kg turning speed range 7.200 U/min max. torque on the spindle 1.666/1.273 Nm power capacity - milling spindle 75/64 kW weight 34 t dimensions 7,0 x 5,8 x 4,0 m 4 axis horizontal machining centre in perfect condition Only 1600 h spindle running time First installation 2022 - 4x disc magazine for 117 HSK-A 100 tools - two pallets with installation station - pallets with six fluid connecting points - Chip conveyor - 2x spiral chip conveyor - Air though spindle - oil skimmer - coolant gun - hydraulic system for part clamping Hodo Adu Raopfx Airew - touch probe Renishaw - package for higher machining accuracy - coolant filter system - elec- mech. tool lenght control - laser system Blum for tools - tool cleaning system - oil dust collector 2.100 qm - Roto clean window

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC Machining Center, Horizontal Manufacturer: MORI SEIKI Machine Model: SH400 Control: MSC 518 (FANUC) Year of Manufacture: 1998 TECHNICAL DATA Travel Ranges - X-axis: (mm) 560 - Y-axis: (mm) 510 - Z-axis: (mm) 510 Rapid Traverse Rates - Rapid traverse in X (mm/min) 40,000 - Rapid traverse in Y (mm/min) 40,000 - Rapid traverse in Z (mm/min) 40,000 Main Spindle - Speed range RPM: 12,000 Tool Magazine - Tool holder: MAS BT 40 Hedpo Agwm Nefx Airsw - Number of tool positions: 60 - Maximum tool length (mm) 350 Pallet System - Pallet size (L x W) (mm) 400 x 400 - Number of pallets: 2 EQUIPMENT FEATURES + Chip conveyor + 3D measuring probe Renishaw + Tool length measuring device Blum + Tool breakage detection Blum Dimensions and Weight - Machine weight approx.: 9,000 kg Subject to changes and errors in the technical data and specifications.

Condition: refurbished (used), 105m3 horizontal steel tank with heating coil Diameter: 2.80m Length: 17.10m Hsdpfx Aisxqfwterew

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Technical specification: - horizontal spindle - spindle HSK-A63 - spindle torque 240 Nm - 4 axis machining - ATC 60 tools - pallet changer (2 pallets) - pallet size 500x500 mm - coolant chiller - coolant filtration system by Knoll - cooland pressure 50 bar through spindle - control system Fanuc - chips transporter - robot interface - linear measuring systems (scales) - manufactured in year 2014 Hodpfxozqyvwo Airew

Condition: used, Year of construction: 2007, functionality: fully functional, A used Mazak machining center is offered for sale. Technical specifications at a glance: • CNC control: MAZATROL Matrix NEXUS • Travel ranges: • X-axis: 730 mm Hedpfx Aez R Db Noirjw • Y-axis: 730 mm • Z-axis: 740 mm • B-axis (rotary table): 360° without stops / indexing 0.001° • Pallets & table: • Pallet size: 500 x 500 mm • Number of pallets: Standard 2 pallets (or extended pallet changing systems) • Max. workpiece weight: 700 kg • Max. workpiece diameter: Ø 800 mm • Max. workpiece height: 1,000 mm • Main spindle: • Spindle speed: Standard up to 18,000 rpm The spindle was replaced last year. However, the front bearing is making noise again. Renishaw 70 bar Consep 2000 2 additional pallets 80 tools Palltech preparation Big Plus Automatic tool changer Handwheel Simultaneous thread cutting

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, and fully functional – ready for operation. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Kombinat “Fritz Heckert” • Weight: approx. 1,700 kg • Work table: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1800 rpm • Power supply: 3x380 V / 50 Hz • Power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse 25 A • Mechanical and automatic feeds in all axes ✔ Equipment: • Robust machine vice on the table • Work light • Cooling system • Complete control panel with adjustment wheels and feeds ✔ Advantages: • Very stable, heavy-duty construction (1.7 tons) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for its durable machines • Fully functional and complete – ready for immediate use • 1000 mm table – allows for machining of larger parts This machine is reliable; it is not a lightweight, cheaply made Chinese product – it is a classic from a time when equipment was built to last. Hsdpfsz Slfmex Airjw

Condition: good (used), Year of construction: 2014, functionality: fully functional, Operating hours and spindle hours: 23.323 / 15.894 CNC control: Siemens 840D sl TECHNICAL DATA: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 880 mm Hodpfx Aij Aa S T Rorow Max. spindle speed: 12.000 rpm Max. torque: 102 Nm Tool taper: SK40 Max. workpiece weight per pallet: 500 kg Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm B-axis (table) indexing: 360 x 1 degree Number of tool positions: 40 FEED RATES Max. feed rate: 60.000 mm/min Rapid traverse: 60 m/min Jog feed rate: 0 – 5.000 mm/min Total power requirement: 57 kVA Machine weight: approx. 11.5 tonnes Space requirement: 5.5 x 3.0 x 2.8 m EQUIPMENT AND ACCESSORIES 2-station pallet changer; pallet size: 500 x 500 mm Chip conveyor, high-pressure coolant system (40 bar) Through-spindle coolant supply, tool changer, documentation B-axis in the table with 1-degree indexing Renishaw PP60op touch probe

Condition: used, Year of construction: 2011, x-travel 730 mm y-travel 730 mm z-travel 850 mm control MSX 701 IV MAPPS 4 max. spindle speed 14.000 min/-1 power capacity - milling spindle 22 / 18,5 kW tool taper HSK A-63 distance ground floor - table top edge 1.200 mm distance Spindlenose and center of table 100 - 950 mm numbers of pallets 2 size of pallet 500 x 500 mm max. workpiece weight 500 kg max. workpiecediameter 800 mm max. workpiece height 1.000 mm change time of pallets 7 sec Indexing-time 1,57 sec B-axis (table) 0,001 ° number of toolpositions 120 pos. tool taper HSK A-63 Hodpfx Aie Af Naierow max. tool diameter 70 mm max. tool-dia with free toolbox 140 mm max. tool length 500 mm max. tool weight 12 kg rapid traverse 50 m/min feed speeds max. 50.000 mm/min Tipp feed 0 - 1.260 mm/min total power requirement 51 kW weight of the machine ca. 12 t dimensions of the machine ca. 5,5 x 3,0 x 2,8 m CNC - MachiningCenter Horizontal MORI SEIKI - NH 5000 / 40 DCG - 2 pos. palletchanger - 2x mounting towers - Processing time: approx. 14,200 hours

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 1,850 mm, Year of manufacture: 1997 Colour: Blue Empty weight: 5.000 kg Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 9712854F - Drive system: Teach-in Hsdpfxo Agwr Re Airew - Power [kW]: 14.0 - Centre height [mm]: 275 - Swing over bed [mm]: 550 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 2000 - Bed width [mm]: 360 - Spindle bore [mm]: 105 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2500 - Options: Fixed steady, Three-jaw chuck, Travelling steady, Quick-change tool post - Transport dimensions: 4100mm x 1900mm x 1850mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, CNC machining center - horizontal Manufacturer: HELLER Machine model: MCH 250 Control: Siemens 840 D – Powerline Year of construction: 2006 TECHNICAL DATA - X-axis mm 800 - Y-axis mm 800 - Z-axis mm 800 Travel range along the center of the table, X-axis mm +400 to -400 Travel range vertically above the pallet clamping surface, Y-axis mm +120 to +920 Travel range transversely to the center of the table, Z-axis mm +150 to +950 Feed forces - X-axis at ED S3 – 40% N 15000 - Y-axis at ED S3 – 40% N 15000 - Z-axis at ED S3 – 40% N 17500 Speeds - Feed rate in X, Y and Z axes mm/min 1-50000 - Rapid traverse speed mm/min 50000 - Acceleration in X, Y and Z axes m/s² 4.0 - B-axis (360 x 1° rotary table) max. speed 1/min 25 Rotary table - Division degrees 360 x 1 - max. permissible clamping weight daN 800 - Max. tangential moment Nm 20000 - max. tipping moment Nm 18000 Spindle - Speed range 1/min 45 – 6000 - Tool holder DIN 69893 HSK 100 Form A - Motor Three-phase spindle motor - Drive power max. at the spindle at ED S1 - 100% kW 40 -- at ED S6 - 40% kW 60 -- at ED S6 - 25% kW 70 --- from speed 1/min 500 - Torque max. at the spindle at ED S1 - 100% Nm 765 -- at ED S6 - 40% Nm 1145 -- at ED S6 - 25% Nm 1340 -- up to speed 1/min 500 Tool magazine - Magazine type Rack - Magazine places incl. 2 x 7 setup positions 405 places - Magazine places for max. tool diameter 23 places Pallet changing device - Pallet size mm 630 x 630 - Workpiece dimensions: Swiveling diameter in the working area x height mm Ø900 x 1000 - Pallet changing accuracy in X, Y and Z axes mm 0.01 - Pallet changing time at 500 (800) daN s 12 (14) - Rotary storage RSP 4-fold - Pallets in the system, number 6 EQUIPMENT FEATURES + Coolant system ++ with vacuum rotary filter - high pressure 50 bar (Knoll VRF 250) ++ Coolant tank capacity l 1500 ++ Coolant pump 3 bar flow rate l/min 170 ++ Coolant pump 2 bar flow rate l/min 40 ++ High-pressure pump 70 bar flow rate l/min 22 + Chip removal ++ Conveyor spirals in the machine bed number 2 ++ Diameter mm 160 ++ Transverse chip conveyor ++ Conveyor speed m/min 1.5 ++ Discharge height mm 1200 + Rotary storage RSP 4-fold + Pallets in the system, number 6 + Integrated tool monitoring IPM + Drill breakage control + Measuring probe Renishaw + Status lamp 3 colors + Remote diagnostics via modem Machine weight daN 19000 Space requirement basic machine L x W x H approx. m 6.3 x 4.9 x 4.0 Power requirement basic machine kVA 85 Hedpfxj Agvffo Airew Maximum power requirement (including all options) kVA 131 Subject to changes and errors in technical data and specifications.

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Hsdpfe Adv Rujx Airjw Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1591, Equipment: documentation/manual, Dienst horizontal case erector – used, fully functional, and removed from a production line. It is stored in a warm and dry hall. Hedpfxo Af Utho Airsw The unit comes with a complete set of technical documentation, including a declaration of conformity. Detailed technical information regarding the design and performance can be found in the attached file – a document in German.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Hedpfxs Afxw Ho Airew Equipment: - Horizontal spindle - 2-position pallet changer - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control - Cooling unit BKW Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, controller manufacturer: Mazatrol, controller model: Matrix, workpiece height (max.): 100 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, table load: 700 kg, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 15 bar, spindle motor power: 35 W, number of spindles: 1, number of slots in tool magazine: 80, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak HCN 5000-II horizontal machining centre. This machine was manufactured in 2007 and is fitted with the tried-and-tested Mazatrol Matrix control system. A robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. Technical specifications: Table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Table indexing: 0.001° Spindle mount: CAT 40 Spindle speed: 35 – 18,000 rpm Spindle motor: 35/26 kW Magazine capacity: 80 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: Hjdjz Rmn Ejpfx Airjw With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2014, operating hours: 56,100 h, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840 D sl, table width: 500 mm, table length: 400 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,310 h, spindle nose: HSK-A 63, number of slots in tool magazine: 42, Equipment: chip conveyor, Horizontal Machining Center We offer you: Manufacturer: Starrag Heckert Model: HEC 400 D Year of manufacture: 2014 Control system: Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Main spindle: Speed range: 8,000 rpm Tool holder: HSK-A 63 NC swivel rotary table: Number of tables: 2 Table clamping surface: 400 x 500 mm Max. table load: 500 kg Tool changer: Number of tool positions: 42 Operating hours: approx. 56,100 h Spindle hours: approx. 5,310 h Hjdpfxj Agr Nho Airjw Technical Features & Accessories: - IKZ - Paper belt filter - Chip conveyor - 2 pallets There are 3 identical machines available. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 48014, Equipment: chip conveyor, For sale is a horizontal, high-performance machining center, HELLER MCH 280, in operational condition. This machine, manufactured in 2007, is specifically designed for high-precision series production and demanding heavy-duty machining. Thanks to its robust construction and powerful spindle, the center guarantees maximum stability and durability. Equipment: - Horizontal spindle - 2-position pallet changer with rotary table - Siemens 840D control system - BKW cooling unit - Knoll chip conveyor - Knoll coolant/lubricant treatment system, Siemens OP7 control - 2nd operating unit - Tool changer Accessories: - Table with mounted clamping device (Diebold) - Telescopic drawer cabinet Contents: Hand tools, machine accessories Attractive offer – flexible & hassle-free We offer not only a high-quality product but also customized financing options that can be tailored to your needs. Whether it's a down payment, installment payments, or individual financing models, we will work together to find the right solution. Hodpfx Ao Afwh Djirow If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please feel free to contact us for more information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 1990, cutting diameter 340 mm saw band length 5800 × 41 × 1,3 mm mm Hodpfe Agckyox Airjw cutting width 700 mm turning speeds 17-120 m/min 700 x 340 mm mm total power requirement 4 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 3,0 x 1,8 x 1,5 m The BEHRINGER HBP 340/700 G is a semi-automatic horizontal band saw designed specifically for cutting flat profiles, beams, and solid materials in heavy steel construction and metalworking. The "G" in the model name denotes an integrated miter-cutting function, which allows for precise angled cuts.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49063, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 69,700 h, For sale is a highly productive, horizontal 4-axis CNC machining center, type Heller H 4000, manufactured in 2008. This machine comes from a plant closure and is characterized by its exceptional stability, high precision, and maximum reliability in series and single-part production. It is fully functional and can be inspected while powered on, by arrangement. Equipment: - Horizontal spindle - Pallet changer with rotary table - Additional 4-position rotary table Keppler SN: M4.4906301 (each with a rotary table) - Chip conveyor Knoll 600K-1 - Fine chip removal system - Coolant/lubricant treatment with band filter Accessories: - Workbench (8 drawers) - Telescopic drawer cabinet - Storage shelf Contents: Hand tools, various analog and digital measuring instruments, machine accessories Attractive offer – flexible & worry-free We offer you not only a high-quality product but also customized financing options that are tailored to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. On request, we can also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don’t have to worry about anything. 📞 Feel free to contact us for more information or a non-binding offer. Hedpfs Afva Eox Airjw We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: good (used), Year of construction: 2011, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, 4-axis machine X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Rotary table, swiveling: 360 degrees Operating hours: 55,000 h Tool holder: HSK 63 Spindle speeds: 20,000 rpm Torque at the spindle: 85 Table size: 400 x 500 mm Table load capacity: 0.5 t Chain magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle Hodpfx Aij Afxqborsw

Condition: excellent (used), Year of construction: 2015, Horizontal conveyor 3000x800mm year 2015 price: €2,450.00 contact: Mr. Rainer Eckerle Hjdpfou N Argex Airew

Condition: excellent (used), Year of construction: 2015, Mazak Horizontal Machine Center NEXUS 8800 II Year 2015 Control : Mazatrol SmoothG (Faunc Base)  X-Axis Travel: 1,400 mm  Y-Axis Travel: 1,200 mm  Z-Axis Travel: 1,325 mm  C-Axis 360o x 0.001o  Pallet/Table Size: 800 x 800 mm Hjdpfsz Sc H Ijx Airsw  Maximum Workpiece 1,450 x 1,450 mm diameter  Maximum Workpiece Weight: 2,200 kg  Standard Spindle Speed: 8,000rpm  Tool Shank: BT50  Standard Tool Magazine Capacity: 120 tools  Pallet Changer: Standard 2-pallet automatic change  Spindle Thru’ Coolant 2 units avaliable