Used Horizontal Turning Lathe for sale (15,897)

Condition: ready for operation (used), Year of construction: 2008, Maier ML 125 Linear – Technical Specifications ML 125 Linear Year of Manufacture: 2008 Control System: Fanuc 16iTB Number of Axes: 7 Axis Acceleration: 2 g Through-hole: Main spindle 12 mm, counter spindle 20 mm C-axis: Kodpfx Adjzggy Uolodt Spindle Bore: 160 mm Spindle Speed: 0 – 10,000 rpm Electronic Indexing: 0.001 degrees Bar Feeder

Condition: ready for operation (used), Year of construction: 2004, The Maier ML 32 D pro Line with FMB mounting is a highly precise, CNC-controlled CNC long-turn lathe (Swiss-type) for demanding metalworking applications. Technical data: Main and counter spindle Kdedpfx Adoy D Nwaoljt • Maximum turning diameter: 32 mm • Maximum spindle bore: 32 mm • Maximum spindle travel (turning length): up to 310 mm • Spindle speed (main & counter spindle): up to 6,000 rpm • Spindle power (main spindle): 5.5 kW • Spindle power (counter spindle): 3.7 kW • C-axis: Available on both the main and counter spindle (0.001° or 5° mechanical indexing) Axes and control • Number of axes: 9 controlled CNC axes (X1, Z1, Y1, C1, X2, Z2, C2, X3, Z3). • Rapid traverse speed: 32 m/min. • CNC control: MAIER PRO - GE FANUC (Fanuc 18iT) Tooling system and machining • Total number of tool positions: Up to 24 tool stations (depending on the configuration, up to 16 of these are powered/rotating). • Cross-working: Typically 5 to 6 fixed turning tools (shank cross-section 16x16 mm) and 4 powered stations. • Back-working: Available for simultaneous machining on the main and counter spindle. Dimensions and weight • Machine weight: approx. 3,800 kg to 4,200 kg (machine weight only, excluding bar feeder). • Dimensions (L x W x H): approx. 2,640 mm × 1,600 mm × 1,900 mm. • Coolant capacity: approx. 240 liters

Condition: used, Year of construction: 2002, turning diameter 16 mm spindle passage 16 mm turning length 160 mm control GE FANUC Series 18 i-T spindle turning speed range 8000 U/min Kdedpfx Asvh I Tvedljt rapid traverse 30 m/min total power requirement 2,2 kW weight of the machine ca. 2,1 t Accessories: bar loader IEMCA, GENIUS 226-32 L, YOM 2002 (for bar dia. 2 - 26 mm and bar lengths 1500 - 3210 mm); chip conveyor, coolant

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Kedpfx Adsy Eb N Deledt

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Kdedpfex D N Ipsx Adljt Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand MITSUBISHI Model M70 Kdodjx D Iftopfx Adljt Main Drive Number of axis 6 Spindle Speed 4000 RPM Technical Specification Counter Spindle yes Driven Tools yes This 6-axis Quick-Tech i60 twin was manufactured in 2016, featuring a CNC turning center with B-axis and driven tools. It includes a main spindle bore of 60 mm, sub spindle bore of 42 mm, and a maximum turning length of 300 mm. The machine offers 4-axis simultaneous machining, full axis programming, and a Mitsubishi M70 control system. Consider the opportunity to buy this Quick-Tech i60 twin horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Oma lathe 1200 mm Genini 1200 mm lathe grinder Conveyor belts for unloading lathes and loading automatic grinders Kodjzfyzvepfx Adljdt

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm power 24 kW, chip conveyor Kodpfsx Irzvex Adlodt

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz Kodeib D H Ropfx Adledt - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed Kedpfow Uf Hwex Adljdt - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. Kedpfxsxyh Nqj Adljdt The lathe is locate in our warehouse and ready for shipment and any time.

Condition: excellent (used), We invite you to contact us for further information and to arrange a product presentation appointment Ksdpfx Adownxhpolodt

Condition: used, Year of construction: 2019, operating hours: 17,324 h, functionality: fully functional, machine/vehicle number: 06990000471, spindle speed (max.): 5,000 rpm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, input voltage: 400 V, overall weight: 6,500 kg, input frequency: 50 Hz, controller manufacturer: Siemens, controller model: 840d sl, For sale is a used DMG CTV 250 vertical turning center in good condition and ready for operation. The machine is equipped with driven tools, allowing for the economical complete machining of complex workpieces. The scope of supply also includes a parts conveyor belt with 30 shuttles for automated workpiece transport and efficient series production. Kedpfxezg Dy Ej Adledt If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 2620 mm Measurements depth 4865 mm Machine weight 11700 kg Kdodpfx Aox D R Rfodlst Control Unit Brand OKUMA Model n/a Main Drive Spindle speed range 3500 Tool taper ASA 8 Number of axis 2 Movement X-Axis Movement 230 mm Z-Axis Movement 670 mm Turret Tool taper VDI 40 This 3-axis Okuma LB 25 II-M was manufactured in 1998. A robust horizontal turning machine featuring an Okuma OSP 5020L control, it offers a spindle speed of 3,500 rpm and a 12-position tool turret. It handles a max workable diameter of Ø 420 mm and lengths up to 1,250 mm. Consider the opportunity to buy this Okuma LB 25 II-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter Kdjdezfiipopfx Adlst 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Kedpfx Ajku Aaaedledt Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x330x420 mm Weight 130 kg Total power requirement 1,1 kw Kjdpfxjv A Hwie Adlodt

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Kdsdpoy Rx A Sjfx Adlot Control type: Teach-in Control system: CNC EQUIPMENT Digital readout (Weiler) Documentation available CE marking

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Thickness: 105 mm Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Kjdpey Rxrtjfx Adljdt Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Four-jaw chuck Steady rest

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, CNC sliding headstock automatic lathe Make: STAR Model: SR-20 Year: 1998 Kodpfxoy Hg Hdo Adljdt with: FANUC 16-T control Back side machining Synchronised spindle Driven tools C-axis Bar feeder magazine FMB TURBO 3-26

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Year of manufacture 2018 Kdedpfxsy I Dq Ae Adljt Control: Fanuc TCM Further data to follow...

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500. Kdsdpfeycp Nljx Adljt

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,441 h, functionality: fully functional, machine/vehicle number: 6000816, turning length: 50 mm, spindle speed (max.): 12,000 rpm, bar passage: 12 mm, controller model: Mitsubishi TX-8i, counter spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 50 mm Main spindle Technology: Belt-driven spindle Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Bar capacity: 12 mm Travel in Z1: 50 mm Workpiece clamping: Collet chuck Counter spindle Technology: Belt-driven spindle Kodpfxox Hxv Ds Adlsdt Speed: 12,000 rpm Power: 4 kW Torque: 7 Nm Travel in X3/Z4: 222/139 mm Rapid traverse in X3/Z4: 15 m/min Workpiece clamping: Collet chuck Tool Carrier I (X/Y) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X1/Y1: 35/37.5 mm Rapid traverse in X1/Y1: 15 m/min Tool Carrier II (X/Z) Technology: Turret with 6 stations (fully driven) Tool holder: Ø25 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Travel in X2/Z2: 35/50 mm Rapid traverse in X2/Z2: 15 m/min Front Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 12,000 rpm, 4 kW, 7 Nm Number of driven stations: 4 Travel in X3/Z3: 222/139 mm Rapid traverse in X3/Z3: 15 m/min Rear Attachment Number of stations: 4 Tool holder: Ø28 mm Station pitch: 32 mm Driven tool speed: 8,000 rpm, 1.5 kW, 2.4 Nm Number of driven stations: 4 Travel in X4: 39 mm Rapid traverse in X4: 15 m/min MACHINE DETAILS Control system: Mitsubishi TX-8i Dimensions & Weight Spindle center height above floor: 1,050 mm Dimensions (L x W x H): 1,450 x 1,098 x 1,700 mm Dimensions (L x W x H) with standard coolant tank: 2,355 x 1,098 x 1,700 mm Weight with control cabinet (max. configuration): 2,000 kg Weight without control cabinet (max. configuration): 1,600 kg Weight with control cabinet (min. configuration): 1,200 kg Weight without control cabinet (min. configuration): 850 kg Operating Hours Power-on hours (control): 19,441 h Automatic mode 1: 7,607 h Automatic mode 2: 6,720 h Production time: 38,989 h Total counter: 50,536 h EQUIPMENT Chip conveyor Coolant pump Bar feeder FMB minimag 3200 Workpiece discharge device (tube) Mechanical interface prepared Various fixed holders Rinse gun

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 2560460122, Tornos Swiss GT13/6 - Sliding Headstock Automatic Lathe CNC Control: FANUC 31i-B, 6 axes, 13 mm capacity Basic Machine Equipment: - 6 linear axes - Independent main and counter spindle - Synchronously rotating guide bush - Adaptation for operation without guide bush - C axis for main and counter spindle - Adjustable pneumatic ejector incl. counter spindle coolant flushing - 3-color signal lamp (yellow, red, green) - Centralized lubrication - Electrical interface for Tornos bar feeder - Oil mist extraction interface - Interface for fire protection system - Interface for customer M-function (6 inputs and 6 outputs) - Compliance with CE and EMC standards Main Spindle: - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076) - Max. bar diameter without preparation: 10 mm - Max. bar diameter with preparation: 13 mm - C1 axis function Guide Bush: - Max. speed: 15,000 rpm - Max. diameter of synchronously rotating guide bush: 13 mm (with integrated motor), guide bush type: B (853) - Max. workpiece length in one clamping: 180 mm - Adaptation kit for operation without guide bush (max. travel: 30 mm) Tool System for Main Operations: - Tool holder for 5 turning tools 12x12 mm on the front of the carrier - Tool holder for 4 turning tools 12x12 mm on the rear of the carrier - S11 tool drive (10,000 rpm) for rotating tools mounted on the front of the carrier X1/Y1 - 1 drive module for cross machining with 3 spindles for ESX 16 collets (2 x 10,000 rpm and 1 x 6,250 rpm) - S21 tool drive (6,000 rpm) for up to 2 driven units mounted on the rear of the carrier X1/Y1 (driven units not included) - Tool carrier with 4 bores Ø 22 mm for stationary finishing tools Counter Spindle: Kdedpfxeyzigcj Adlst - Max. speed: 15,000 rpm - Adapted for F16 collets (76-1076), max. Ø capacity: 13 mm - C4 axis function Tool System for Secondary Operations: - Base carrier for 8 back-working tools; on the 4 upper positions, rotating and/or stationary tools can be mounted (rotating tools not included) - 4 lower positions with 4 fixed holders for ESX 16 collets - 2 stationary holders with Ø 22 mm bores (for upper positions) - S51 tool drive (6,000 rpm) for driving back-working tools (max. 4 rotating tools) ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing options to suit your requirements. Whether down payment, installment plan, or individual financing solutions – together we will find the right option for you. Upon request, we will also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and punctual process so you do not have to worry about a thing.

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 340 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 215 mm, spindle motor power: 30 W, turning diameter: 200 mm, turning height: 200 mm, rotational speed (min.): 4,000 rpm, Manufacturer: FAMAR Model: ERGO 250 Category: Vertical CNC Lathe Year: 2004 CNC Control: Siemens 840D Specifications Maximum turning diameter: Ø 350 mm Maximum machining diameter: Ø 200 mm Maximum machining height: 200 mm Spindle Integrated electric spindle Chuck: Ø 250 mm Spindle nose: ASA A2-6 Spindle speed: 6,000 rpm Spindle power: 30 kW Axes X-axis: 340 mm (820 mm total) Y-axis: 120 mm (±60 mm) Z-axis: 215 mm C-axis: 360° with 0.001° resolution Heidenhain optical scales on the axes Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 20,000 mm/min Z-axis: 30,000 mm/min Kedpfozdu Dpex Adlodt Turret 12 positions Powered tools Powered tool speed: 4,000 rpm Powered tool power: 8 kW Turning tools: 25x25 mm Boring bar: Ø 40 mm Equipment Automatic loading/unloading system Pallet shuttle with workpiece pallets Chip conveyor Coolant tank with high-pressure pump Fixed and powered tool holders Manuals and electrical diagrams CE declaration General Data Installed power: 50 kW Machine weight: 10,000 kg Dimensions: 5,200 x 3,200 x 3,200 mm (L x W x H)