Used Horizontal Turning Lathe for sale (15,591)

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Cedsztducepfx Afzehd

Condition: like new (used), Year of construction: 2023, operating hours: 12,147 h, functionality: fully functional, spindle motor power: 3,700 W, spindle speed (max.): 10,000 rpm, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Citizen A20-3F7 + FMB Minimag 20 bar FEEDER Year: 2023 7 axes: X1, X2, Y1, Z1, Z2, C1, C2 Removable guide bushing: can be used in both Swiss-type (sliding headstock) and fixed-headstock configurations. Maximum main spindle speed: 10,000 rpm Machining length: 200 mm X2 axis with linear guides Simultaneous C-axis control on both the main and sub-spindle, with back-working driven tools Short cycle times thanks to the advanced CNC control (Fanuc FS32i) Maximum machining diameter: 20 mm (standard) Machining length per chucking: 200 mm, or 2.5 × D in fixed-headstock mode Main spindle: 10,000 rpm, 3.7 kW Sub-spindle: 8,000 rpm, 1.5 kW Gang-type driven tools: 6,000 rpm, 0.75 kW Chsdpfx Afsz D Tx Nszsd Back-working driven tools: 6,000 rpm, 0.75 kW Compact footprint: approx. 2.5 m² Polygon turning function Equipped with an FMB Minimag 20 bar feeder.

Condition: good (used), functionality: fully functional, Center height 110 mm Center width 160 mm Spindle bore 23 mm 3 speeds for clockwise rotation Cjdpfx Ajz E A D Dofzehd and 3 speeds for anti-clockwise rotation

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Codpfeytn Emox Afzohd Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: used, total height: 1,700 mm, total length: 1,400 mm, total width: 2,400 mm, Year of manufacture: 1997 Colour: Green Empty weight: 3.000 kg - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout Codpfxjwnh I Se Afzjhd - Type of digital readout: Weiler - Control: CNC - Transport dimensions: 1400mm x 2400mm x 1700mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface Chjdpfxexxifks Afzed # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 119, spindle motor power: 5 W, turning length: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 99 rpm, turning diameter: 16 mm, overall weight: 2,300 kg, type of input current: three-phase, bar passage: 16 mm, total width: 1,340 mm, total length: 1,850 mm, total height: 1,685 mm, input voltage: 380 V, number of driven tool stations in tool turret 1: 6, number of driven tool stations in tool turret 2: 6, Equipment: documentation/manual, rotational speed infinitely variable, I am offering my lathe for sale, complete with the accessories shown in the pictures. Cedjy Udcfopfx Afzjhd It includes a bar feeder and a chip conveyor. The machine is controlled by a Yasnac CNC system. The machine has two turrets, allowing for multi-axis and multi-group control.

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: MW144, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3000 rpm - Power at 100% duty cycle: Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle: - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower servo turret, all stations driven - Maximum speed: 4500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Mains voltage: 400V 3-phase - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design: optimized chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load monitoring and automatic force analysis via OSP-P300L-R - Workpiece detection at sub-spindle: Low-pressure compressed air monitoring - Spindle cooling system - Documentation: Electronic / Hard copy available OPTIONAL Bar feeder: TOP Automazione, model FU 352 - Bar feeder (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine Condition: NOT WORKING - Turret disassembled for repair - X-axis ballscrew to be replaced - Heat exchanger / lubrication unit to be replaced - Hydraulic unit to be replaced - Sub-spindle to be repaired Cedpfx Aoxxidasfzshd - Spindle position encoder to be replaced - Chip conveyor to be repaired - Set of bar clamping guide and accessory kit - Set of bearings for pusher head

Condition: excellent (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & SBF326-3.2M Bar Feeder Csdpsz H U I Refx Afzjhd Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: used, BIGLIA B 470/YSM is a CNC turning lathe engineered for precision machining, delivering high accuracy and reliable performance. Capacities: turning diameter 210 mm, bar diameter 65 mm, turning length 300 mm, Y axis 110 mm; two turret slides (2) with 12 positions each and 12 driven tools per turret. Key specifications: max speed 4000 t/min; power of back spindle 11 kW; spindle motor 26 kW; voltage 50 Hz 3x 400 Volt; machine weight about 6150 kg; time under power 74536 Heures, operating time 24651 Heures, working time 8588 Heures. Accessories: bar feeder LNS HYDROBAR SPRINT. Capable of achieving tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool industries Cedpszqbh Isfx Afzjhd

Condition: good (used), Year of construction: 2018, functionality: fully functional, The equipment is as shown in the pictures. All tools visible in the pictures are included. Csdpfx Afjx Na Sljzehd

Condition: good (used), Technical specifications: * Over bed – 270 mm * Center height – 125 mm * Maximum distance between centers – 500 mm * Spindle bore – 28 mm * Collet type B32 * Longitudinal travel of the carriage – 440 mm * Cross travel – 130 mm * Travel of the small tool-holding carriage – 90 mm * Travel of the tailstock sleeve – 100 mm Equipment: * 3-jaw chuck, 125 mm diameter Cjdpfx As Afu Inofzehd * Multifix A turret * 3 Multifix A tool holders * Quick-change tool system * 1 steady rest * 1 rear carriage

Condition: good (used), Year of construction: 2002, The machine is in good condition, equipped with Fanuc Series 16i-T control and FMB Turbo 5-42 bar feeder. Chedjy Eb N Dspfx Afzjd

Condition: good (used), functionality: fully functional, Technical data: Center height 110 mm Center distance 160 mm Spindle bore 23 mm Chodpfxez I Dk Re Afzod Motor power 1.7 kW Speed adjustable via potentiometer, approximately 100 – 2,300 rpm 3 preset speeds or 3 gear stages. Equipment: • Operating modes: Manual + Automatic • Pneumatic clamping device • Tilting tailstock with 2 spindles for collet chucks K 12, with switch for changing the direction of rotation (for thread cutting) • Hand lever cross slide with stops, consisting of transverse and longitudinal slides. • Multifix steel tool holder, size A • Collet chuck with collets • Mounting elements and machine light

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Bar capacity 38mm, X axis stroke 480mm, Z axis stroke 285mm, spindle speed 6,000 rpm, power 5.5Kw, Cjdpfx Afowb A Hcezohd swarf conveyor.

Condition: like new (used), CNC Swiss-type lathe Weco S 206 E II Machine Bar feeder Tools The machine has 7,000 operating hours Cedpfsy A Sghex Afzehd

Condition: good (used), Year of construction: 2011, functionality: fully functional, Mitsubishi controller, tapping spindle, Codpfoz Ryz Eox Afzshd loading magazine.

Condition: used, total length: 10,560 mm, total width: 1,710 mm, total height: 1,400 mm, Colour: Green Empty weight: 9.000 kg Price: On request - Drive system: Conventional - Power [kW]: 22.0 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 360 - Distance between centres [mm]: 6000 - Bed width [mm]: 700 - Spindle bore [mm]: 62 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 1180 Cjdpfsyg Hi Rsx Afzshd - Options: Digital readout - Type of digital readout: Sony - Transport dimensions: 10560mm x 1710mm x 1400mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total width: 110 mm, total height: 1,700 mm, Year of manufacture: 1985 Colour: Grey Empty weight: 1.000 kg - Year: 1985 - Serial number: 315.928 - Drive system: Conventional - Centre height [mm]: 750 - Swing over bed [mm]: 1500 Chjdpfx Aozrxgwjfzod - Distance between centres [mm]: 600 - Transport dimensions: 1800mm x 110mm x 1700mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Lathe SCHAUBLIN 102N80, serial number 277444. Chsdpfxeztc Dvj Afzsd

Condition: like new (used), LATHE FOR WORKSHOP USE For sale: a HAGER HDE-59 BIG lathe with a distance between centers of 1,000 mm. This lathe, which was used in a workshop setting, is in excellent condition. Csdpfx Ajz Ngb Nsfzjhd Technical data: - Motor: 2.2 kW / 3 hp / 400 V - Speed ranges: 100-450 rpm 300-1,100 rpm 750-2,700 rpm - Center height: 250 mm - Distance between centers: 1,000 mm - Tool rest: 350 mm - Direction of rotation switch - Spindle: M33 x 3.5 mm with ASR (Euro) safety slot - Spindle and tailstock taper: MK3 - Hollow spindle diameter: 20 mm - Main spindle: 4-bearing - Quill travel: 150 mm (with scale) - Overall length: 1,780 mm - Weight: 235 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: lathe, turning machine, turning lathe, wood turning lathe, turning, lathe tools, woodturning, turning, machine, Hager Reference: R-A0117

Condition: used, Year of construction: 2016, turning speeds 0 - 8.000 U/min hollow 20 mm control FANUC - 31i B Turning Automatic Lathe - swiss lathe | ML20C5 - 2016 equipped with bar feeder and chip conveyor. Codpfoz Dbynox Afzjhd The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ML20C5 | ML-20C5 | ML-20 C5 | ML 20 C5

Condition: used, spindle passage 12 mm Control Fanuc type LB 2 bar loader FMB weight of the machine ca. 1,4 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Csdpfxoyt R Has Afzjhd About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2010, bar material dia. 20 mm spindle passage 24 mm turning length 350 mm turning speeds 10.000 U/min Control CNC Siemens 840Di/Yaskawa c-axis 0,01° ° gripping station 20 mm speeds 10.000 U/min Chodpfxjzrh Eco Afzod c-axis 0,01° ° rapid traverse 20 m/min turret (x-stations) 3 x 8 + (3x Y-Achse) total power requirement 5,5 kW weight of the machine ca. 4.850 t dimensions of the machine ca. 3,2 x 1,75 x 1,9 +FMB m CNC sliding headstock automatic lathe Star ECAS 20T (12 axes) with 2 spindles, 3 turrets and barloader FMB.

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Csdpfx Afey Avyxezshd Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations