Used Horizontal Wood Grinder for sale (22,115)

Year of construction: 2019, operating hours: 3,728 h, condition: ready for operation (used), Control Unit Iedpfx Abjxxdrxe Ija Brand HAAS Model NGC Main Drive Spindle Speed 4000 RPM Spindle bore 88.9 mm Number of axis 4 Spindle motor power 149 kW Movement C-Axis Movement 360 º X-Axis Movement 213 mm Z-Axis Movement 572 mm Y-Axis Movement 51 mm Tools Slots in storage 12 Technical Specification Max. Bar Diameter 64 mm Driven Tools yes This HAAS ST-20Y lathe, manufactured in 2019, features a Y-axis, tailstock, automatic tool probe, and chip conveyor. With a spindle speed of up to 4000 rpm and driven tools supported by a C-axis, it offers strong capabilities for complex machining. If you are looking for a high-quality turning solution, consider the HAAS ST-20Y we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1972, functionality: fully functional, travel distance X-axis: 290 mm, travel distance Y-axis: 170 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, overall weight: 1,200 kg, x- travel: 290 mm y-travel: 170 mm z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 Ijdpjxz Eb Tjfx Ab Isa max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Iodpewp Rqfsfx Ab Ija Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 30,000.00 EUR (VAT is not included)

Condition: excellent (used), Year of construction: 2007, Control: Siemens 840D powerline Ijdexy S Aujpfx Ab Ija Travel paths X/Y/Z: 630/630/630 mm 2-fold pallet changer Spindle speed: 10,000 rpm Knoll coolant system with paper band filter Tool holder: SK40 Tool magazine with 80 stations

Condition: excellent (used), Year of construction: 1986, machine/vehicle number: 815, total height: 1,900 mm, total length: 1,400 mm, total width: 900 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 2,000 rpm, overall weight: 600 kg, table length: 500 mm, table width: 200 mm, Equipment: rotational speed infinitely variable, TECHNICAL DETAILS: - Serial number: 815 - Operating voltage: 380 V - Frequency: 50–60 Hz - Rated current: 14 A - Table dimensions: 500 x 200 mm WORKING RANGE & CAPACITY: - Universal dividing head center height: 170 mm - Tailstock center height: 120 mm (with intermediate support: 170 mm) - Max. workpiece length between centers: 336 mm - Workpiece diameter with unsupported mounting: approx. 600 mm - Max. center length: 950 mm - Internal taper of indexing spindle: Morse 4 / Unified 40 - T-slots: 12 mm (machine base), 8 mm (additional elements) TRAVEL & ADJUSTMENTS: - Sharpening stroke: 190 mm - Cross travel of tool holder: 100 mm - Vertical movement of grinding head: 325 mm - Tool holder: 230 mm - Indexing device on tool slide: 330 mm ROTATION / SWIVEL RANGES: - Grinding head mounting / tool holder / grinding head / universal headstock: 360° Isdpfx Aswxrfpsb Iea DRIVE & SPEEDS: - Three-phase motor: 0.7 / 0.85 kW - DC motor: 1.3 kW - Spindle speed: 4000 / 8000 rpm (dual speed) - Stepless DC: 2000 – 10000 rpm ACCESSORIES: - Includes two-axis digital readout - Extensive accessories set suitable for the machine

Condition: used, Coffee Grinder Manufacturer: Schärf MAZZER Model: xmill-Protect Iedpfxoxzp Sco Ab Iea Precision grinder with conical solid steel burrs Slow rotation for optimal grinding quality Robust stainless steel housing Power supply: 220 – 230 V / 50 Hz / 900 W (Suitable for standard household power) Safety marks: GS and CE Weight: 25 kg Dimensions (W/H/D) approx.: 285 x 820 x 400 mm Ideal for professional use in the catering industry.

Year of construction: 2020, operating hours: 2 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series Oi-TF General Data Machine weight 20000 kg Main Drive Spindle speed range 1800 rpm Spindle motor power 30 / 37 kW Spindle bore 132 mm Tool taper MT5 (built-in) Number of axis 2 Movement X-Axis Movement 350 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 3130 mm Z-Axis Rapid Traverse 10 m/min Isdpfx Ajxxdumob Ija Workpiece Workpiece drm over bed 775 mm Workpiece drm over support 630 mm Turret Number of turrets 1 Tail Stock Pinol diameter 160 mm Tools Number of station 1 Additional Equipment Electric Power Supply Required: 59 / 220 kVA This SMEC SL 4500 L was manufactured in 2020. It features an 18" chuck, a maximum turning diameter of 690 mm, and a machining length of 3,055 mm. The spindle supports speeds up to 1,800 rpm with a motor power of 30/37 kW. It includes a 12 station turret and a tailstock with a MT5 taper. Consider the opportunity to buy this SMEC SL 4500 L horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: good (used), Year of construction: 2000, grinding wheel diameter: 750 mm, grinding width: 180 mm, controller manufacturer: SIEMENS, controller model: 840 D, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE (DOUBLE DISC GRINDER) .. Grinding wheel diameter: 750 mm .. grinding width max. - throughfeed grinding: 180 mm .. material thickness max. - throughfeed grindin: 30 mm Iodexzy Nfspfx Ab Ioa .. grinding width max. - plunge cut grinding: 300 mm .. material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 .. drive power: 48 kW GRINDING SPINDLE 2 .. drive power: 48 kW COMPONENT-FEEDER .. Feeder Design: rotary Feeder .. feeder velocity max.: 20 mm/min .. feeder velocity min.: 240 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4900 mm .. space requirements -front/back-: 5000 mm .. total height: 3100 mm .. total weight approx.: 13000 kg with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

Condition: used, Year of construction: 2018, operating hours: 2,900 h, functionality: fully functional, Perfect machine, for example, for the production of artillery shell housings according to NATO standards or ideal for industries like oil and gas, construction, aerospace and shipbuilding. Very good condition and immediately available. The machine has seen very little use and is in absolutely like-new condition. 21" Doosan Puma 600L 3200 CNC lathe with steady rest (automatically adjustable steady rest) Year of manufacture: 2018 Including steady rest Machine operating hours: 2,036 hours Technical specifications: CNC control: Fanuc 32i-MA Max. turning diameter: 900 mm Max. turning length: 3,200 mm Chuck size: 21" Iedpfx Ajxz Hbuob Ioa Spindle bore: 152 mm Number of tool stations in turret: 12 X / Z travels: 940 mm / 3,200 mm All further information available on request. The machine can be demonstrated under power at any time on site.

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Paper filter Isdpfx Abewrt Rmj Ija Chip conveyor

Year of construction: 2014, condition: ready for operation (used), Control Unit Isdjxxdu Hjpfx Ab Ioa Brand FANUC Model Series 3i-B Main Drive Number of spindles 2 Spindle speed range 3000 Number of axis 5 Movement Y-Axis Movement 300 mm This 5-axis DOOSAN SMX 3100 was manufactured in 2014, featuring a multi-tasking turning center with high rigidity and precision. It offers a maximum turning diameter of 660 mm and a length of 1540 mm. The machine includes a Y-axis stroke of 300 mm and a B-axis rotation of ±120°. It supports a main spindle speed up to 3000 rpm and a milling spindle speed up to 12,000 rpm. If you are looking to get high quality turning capabilities consider the DOOSAN SMX 3100 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 1998, Fanuc System 16 MC control Travel paths X/Y/Z 800/750/770 mm Spindle speed 20,000 rpm Iodpfewwkh Tsx Ab Ija Tool magazine for 132 tools HSK A-63 Dual pallet changer 630x630 mm Knoll system with internal coolant supply Chip conveyor

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3700 kg Main Drive Spindle speed range 24000 Spindle motor power 8.5 kW Number of axis 3 Ijdpfsxxduyox Ab Ija Movement X-Axis Rapid Traverse 80 m/min Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 250 mm Z-Axis Rapid Traverse 12 m/min Tools Type of tool holder HSK 63F Additional Equipment Remote Control Pendant Z-axis Tool Length Sensor 4 Vacuum Suction Cups // 4 Additional Positioning Pins (long) Automatic Dust Shoe Height Adjustment // Automatic Part Pushing System Receiving Table for Finished Parts (2800 x 2070 mm) Loading Table (2800 x 2100 mm, 2000 kg Capacity, 500 mm Stack) CNC Control System TPA – WSCM Straight-line Nesting Software (Included) Pneumatic and Electrical Preparation for Drill Head Upgrades ECO Mode for Energy Saving This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine. Application Types CNC Wood Machining

Year of construction: 1997, condition: good (used), Control uni-Pro CNC 90 Travel X/Y/Z 800/800/710 mm Spindle speed 4500 rpm Tool magazine for 52+120 tools SK 50 Indexing table 1° Iedpfx Ajlkgfaeb Iea 4-fold pallet changer 500x630 mm chip conveyor

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1950 mm Measurements depth 3860 mm Measurements height 1905 mm Machine weight 5550 kg Control Unit Brand FANUC Model 21iT Main Drive Spindle speed range 50–4200 Spindle motor power 15 kW Movement X-Axis Movement 189 mm Workpiece Workpiece drm over bed 520 mm Additional Equipment High-speed tailstock Parts catcher Bar feed interface This HARDINGE Quest 51 SP was manufactured in 2001. It features a swing over bed of 520 mm, a maximum turning diameter of 356 mm, and a spindle speed up to 4200 RPM. The machine includes a 12-station live tooling turret with integrated C-axis and Y-axis for multi-axis machining. Control is managed via a 21iT CNC system. Consider the opportunity to buy this HARDINGE Quest 51 SP horizontal turning machine. Contact us for more information. Application Types Turning Isdpfexuw E Rox Ab Isa

Year of construction: 2006, operating hours: 5,241 h, condition: ready for operation (used), This UNTHA LR 630 was manufactured in 2006. A robust used shredder with a power of 18.5 kW and a hopper opening of 630 x 800 mm. It has accumulated 5241 operating hours, ensuring reliability and efficiency for your shredding needs. Consider the opportunity to buy this UNTHA LR 630 shredder. Contact us for more information. Application Types Other Woodworking Machinery Iedpfxoxzvrio Ab Ija

Year of construction: 2015, operating hours: 12,244 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D-SolutionLine General Data Measurements width 1440 Measurements depth 2730 x x Measurements height 1620 mm Machine weight 4200 kg Main Drive Spindle speed range 4500 Spindle motor power 11 kW/ 16.5 kW Number of axis 2 Movement X-Axis Movement 230 mm X-Axis Rapid Traverse 15 m/min Z-Axis Movement 740 mm Z-Axis Rapid Traverse 24 m/min Workpiece Workpiece drm over bed 425 mm Turret Number of turrets 1 Tool taper DIN 69880/30 mm Tail Stock Pinol diameter 80 mm Iedpsxn Dm Usfx Ab Iea Tools Number of station 12 Media Oil tank 30 liters Additional Equipment Full splash guard cladding + coolant unit Work area light + pneumatic equipment Panoramic window for optimum visibility into the work area This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 4 Iodpfxsxzvtgj Ab Ioa Movement X-Axis Movement 560 mm Y-Axis Movement 610 mm Z-Axis Movement 560 mm This 4-axis Okuma MA-40HA horizontal machining centre was manufactured in 2001. It features a robust OSP 100U control system and a generous automatic tool changer with 60 magazine slots (ISO40). Ideal for complex machining tasks with its 560 mm travel in X, Y, and Z axes. Contact us for more information about this machine. Application Types Milling

Year of construction: 2018, condition: ready for operation (used), Control Unit Brand MAZATROL Model Mazatrol SmoothG CNC Main Drive Iodpfx Abjxya Aie Isa Number of spindles 2 Spindle speed range 5000 Movement X-Axis Movement 234 mm Y-Axis Movement 100 mm Z-Axis Movement 625 mm W-Axis Movement 585 mm Workpiece Workpiece drm 695 mm Turret Number of tool slots 12 This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports up to 5000 rpm, while the second spindle reaches 6000 rpm. A great opportunity to buy this Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Application Types Turning

Year of construction: 2007, operating hours: 48,820 h, condition: ready for operation (used), General Data Machine weight 2500 kg Measurements height 1750 mm This 4-axis Index ABC horizontal turning machine was manufactured in 2007. It features a spindle clearance up to 65 mm, spindle diameters up to 100 mm, and a maximum spindle speed of 7500 rpm. The machine includes two turrets, each with rapid traverse rates of 27 m/min and 36 m/min for the X and Z axes, respectively. It supports bar diameters up to 52 mm and has a coolant system with a flow rate of 60 l/min. Consider the opportunity to buy this Index ABC horizontal turning machine. Contact us for more information. Application Types Turning Iodpfxsxzlquo Ab Isa

Year of construction: 2006, operating hours: 64,831 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model SINUMERIK 840 D Main Drive Spindle bore 165 mm Workpiece Workpiece drm over bed 1200 mm Workpiece weight 6000 kg Tail Stock Iedpfxjxzlv Rj Ab Ija Pinol diameter 140 mm Pinol way 300 mm Pinol tool taper MT 6 This Weiler E120x2000 was manufactured in 2006. It features a robust 400 V operating system, a power rating of 55 kVA, and can handle workpieces up to 6000 kg. With a maximum swing over bed of 1200 mm and a center distance of 2000 mm, it's ideal for large-scale turning tasks. Includes a chip conveyor and three-jaw chuck. Contact us for more information about this machine. Application Types Turning

Year of construction: 1991, condition: ready for operation (used), Control Unit Brand FANUC Model 15T This Monforts RNC 3 horizontal turning machine was manufactured in 1991. It features a three-jaw power chuck, hydraulic hollow clamping device, manual tailstock, and a Fanuc control system. Additional highlights include a chip conveyor with a discharge height of 1200 mm and a manual swing-in measuring probe for tool measurement. If you are looking to get high-quality turning capabilities, consider the Monforts RNC 3 machine we have for sale. Contact us for further details regarding this machine. Application Types Iedpfexzlq Uox Ab Isa Turning

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand SIEMENS Model 840D sl Ijdpjw Tnn Uofx Ab Ioa Main Drive Spindle speed range 9000 Stroke 200 mm Number of axis 3 This 3-axis HELLER PT 16 was manufactured in 2016. It features a multifunction spindle driven by a compact servo motor, achieving speeds up to 15 m/min and a maximum of 9,000 rpm. The machine offers a 200mm stroke in 3 axes with ball rail guides and screws for enhanced precision. Consider the opportunity to buy this HELLER PT 16 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Year of construction: 2021, condition: ready for operation (used), Control Unit Brand FANUC Main Drive Number of axis 3 This 3-axis CMZ TTL-66-66-TTY-T2Y was manufactured in 2021, offering advanced horizontal turning capabilities. Ideal for complex and precise metalworking tasks, this machine ensures efficient production with its robust design and modern technology. If you are looking to get high-quality turning capabilities, consider the CMZ TTL-66-66-TTY-T2Y machine we have for sale. Contact us for more information. Application Types Turning Iodpfx Aexzluasb Isa

Condition: ready for operation (used), Year of construction: 2019, General Data Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min Iedpfx Aexzltcjb Iea This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)