Used Hot Press Steam for sale (15,896)

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Voltage: 380V/50Hz & 230V/50Hz Chedpfxsz Td Ale Adled Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Self-dismantling and removal included.

Condition: used, Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Chjdswtw E Dspfx Adljd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. Chsdoz E Nh Nopfx Adlod The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: used, functionality: fully functional, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Cjdpfx Ae Ad Nkbedljhd Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters Chedo Ah El Sopfx Adljd In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Chjdpfx Adjzt N R Nsljd

Condition: good (used), Well-maintained Falch Trail Jet 15 500 bar 490 operating hours Cedpfouvd N Ssx Adlehd Year of manufacture 2021 Hot water Regularly serviced by Falch Various accessories available as options

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, Csdpfsz Rn Sfsx Adlshd 8-cylinder hydraulic pressing system. Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Chjdpfx Asz S Utlodlsd Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement.

Condition: like new (used), Year of construction: 2018, Dynajet 500th Pressure Washer Year of manufacture: 2018 Max. temperature range: 95°C Brand: Dynajet Mobile: yes Serial number: 62005720 Type: 500th Maximum working pressure: 500 bar With remote control; water tank 1000 l; unladen weight 1420 kg; approx. 30 m high-pressure hose; approx. 25 m filling hose; operating hours: 597 hours; Chedpoyigr Uefx Adljd tested and fully functional

Condition: like new (used), Falch Trail Jet 15, 06/2024, as new with warranty, 232 operating hours Chodpfewz Scaox Adljd

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 Codpj Aacybjfx Adlshd - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Falch Trail Jet 15, 300 bar, 24 l/min, 305 operating hours Chedpfx Aewlkrusdlod

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 540 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 Codpfx Adsz U U Dpolohd - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Chedps Af Hd Ujfx Adlod Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: reconditioned (used), Year of construction: 2023, shaft length under head: 200 mm, drawing speed: 75 mm/s, disc diameter: 14 mm, 2-shot cold press. FIDE EF-180 For the production of long screws Csdpfjqagpxjx Adlehd Range: Diam.14x200 mm. Ppm: 75 Overhauled to new by HBR Ltd.

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: VAN18-0015, power: 995 kW (1,352.82 HP), EX Diageo 2017 BINDER / HERZ Biomass-Fired Steam Boiler Plant – Complete System Boiler capacity: 995 kW, as stated on the manufacturer’s nameplate. Complete industrial biomass steam generation plant available from Rosemaund Farm Distillery in Herefordshire, UK. Installed and commissioned in 2017 and formerly operated as part of the Chase Distillery site during its period of Diageo ownership. The plant is now surplus to requirements following a change in production strategy. The installation is offered substantially complete and includes: • BINDER / HERZ biomass-fired steam boiler plant • Hydraulic walking-floor fuel hopper • Screw and inclined fuel conveyors / auger stoking system • Economiser • Flue gas and ash collection equipment • Ash removal conveyors and collection system • HERZ / BBSM plant control panel • Flue, fans and associated fittings • BYWORTH insulated steam accumulator, approx. 23m³ • Water treatment equipment • Steam blowdown vessel • Condensate recovery unit • Hotwell and associated pipework/platforms Boiler reference: VAN18-0015 Year: 2017 Steam accumulator: BYWORTH M847, 2018 The plant remains installed and can be inspected by appointment. An independent engineering inspection and functional test can be made available to serious purchasers. Sale basis: Ex-works, Herefordshire, United Kingdom. Purchaser to arrange dismantling, loading and transport. Chsdpfx Adez Ik Aajljd Full technical information, photographs and further documentation available on request.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: MINVAP VPXpert K 10c, Manufacturer: Grabner Instruments Messtechnik GmbH - Type: MINVAP VPXpert K 10c - Year of manufacture: 2017 - Technical data: > Measured temperature range: 0 to 120°C (user programmable) > Temperature stability: ±0.01°C > Temperature profiles: single temperature, stepped, or ramp mode > Pressure range: 0 to 1000 kPa (0 to 145 psi) > Pressure resolution: 0.1 kPa > Pressure tolerance: 0.1 kPa > Vapor-liquid ratio: 0.02/1 to 100/1, adjustable per selected method > Power requirement: 90-264 V AC, 45-63 Hz, 200W (mains supply) > Field application DC/AC power converter: 12V / 200W > Dimensions (W x H x D): 253 x 368 x 277 mm (10 x 14.5 x 10.9 in) > Weight: 9 kg (20 lb) > Precision data: Codpfx Adext H Hheljhd > Repeatability: ±0.3 kPa (0.04 psi) > Reproducibility: ±0.7 kPa (0.10 psi)

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm Codpez Sqiijfx Adlshd • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 5000 Kn

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 1,00,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Chsdpfx Aez Sqf Redlsd • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! Chjdpfezy U Uyox Adlsd For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm Csdpfjzrpt Usx Adlohd ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: ready for operation (used), Year of construction: 2011, stroke length: 280 mm, total width: 2,850 mm, total height: 4,800 mm, overall weight: 68,000 kg, product length (max.): 3,550 mm, Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details. • Press capacity: 400 ton • Rated tonnage point above B.D.C.: 7 mm • Strokes per minute: 35 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2600 x 1100 mm • Bolster area (L x W): 2700 x 1200 mm • Bolster thickness: 230 mm • Working height: 1200 mm • Side opening: 1100 x 700 mm • Main motor: AC 37 kW x 4 / VS 45 kW x 4 • Slide adjustment motor: 2.2 kW x 4 • Required air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 4000 Kn Chedpfxsz Stfyj Adlsd

Condition: ready for operation (used), Year of construction: 1965, operating hours: 5,128 h, functionality: fully functional, machine/vehicle number: 01123, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, table length: 1,000 mm, table width: 800 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS Speed range: 12.5–1,000 rpm Table dimensions: 1,000 × 800 mm Number of T-slots: 7 Travel range X-axis: approx. 600 mm Travel range Y-axis: approx. 500 mm Travel range Z-axis: approx. 600 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,300 mm Machine weight: 6,000 kg Cods Ahn Arjpfx Adlehd Operating hours (read): 5,128 h EQUIPMENT Tool holders WALTER dividing head Four-jaw chuck, diameter 200 mm Various clamping devices External reference: Frankenthal - Lot 391

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Chodpfx Adjzxcldeljd Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit EQUIPMENT Movable press cylinder Documentation CE certificate CE marking