Used Hot Press Steam for sale (15,805)

Condition: used, functionality: fully functional, Knuckle joint / coining presses CINCINNATI HME K-360 tons (3 units) K-600 tons (1 unit) Cincinnati HME K360 360 Tons capacity Stroke 2.125" Speed 90-200 SPM Itedpfjypathex Abcsd Main Motor 22 kW Maximum Coin Diameter 34 mm Maximum Coin Thickness 3.5 mm Cincinnati HME K600 600 Ton Capacity, 4.5'' Stroke, 25 Strokes per min, 17.5'' Shut Height (SDAU), 9/16'' Top Tool Adjustment

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Iodpfxot Eq E Se Abcstd Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, Year of construction: 2009, operating hours: 10,000 h, functionality: fully functional, feed length X-axis: 4,500 mm, total width: 1,300 mm, Reconditioned Sonar brand generator, 60 kW. Pressing size: 4500 mm x 1500 mm (4.50 x 1.30 m). Equipped with an automatic gluing unit that applies glue independently. Itodjyvhl Tspfx Abced

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany. Itodpfx Aboyur E Hecsd

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs Itjdpfx Abjqxalxecod For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Ijdewd N Rmjpfx Abcotd Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Itjdpfx Abexgpaqjcod Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm Itsdpfx Abjyu Tp Tocsd - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Self-loading press for laminated wood Steton P111 3000×1300 Working length: 3000 mm Working width: 1300 mm Automatic material loading Shelves heated by oil Diameter of vertical pistons: 70 mm Diameter of horizontal pistons: 50 mm Year of manufacture: 2006 Itedpfxeyuah Ao Abcod Total power: 24.5 kW CE certificate

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Iodpfx Ajyuylnobcjtd Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: new, Year of construction: 2024, neu 2024 7296 prompt, Zwischenverkauf v Türkei 70300 € 1328.67 € 1 100 to 4.5 mm 700 mm 1000 mm 210 mm 1 - 132 mm 58 1/min 6 90 mm Itsdpfx Aowiqq Ssbcod 60 mm 300 mm 445 mm 7.5 kW 1650 mm 1545 mm 3011 mm 7000 kg Welded steel construction body frame Crankshaft made of AISI 4140 (42CrMo4) alloy steel, CNC grinded for max. precision SnBz-12 quality bronze to bearings, grinded for min surface resistance Ram supported from 6 sides Pneumatic counter-balancing of the ram 7" touchscreen Gears in oil bath Pneumatic clutch-brake combination PLC control for safety Photocell light barriers Motorized slide adjustable Mechanical overload fuse Two hand and foot pedal control Adjustable stroke (inverter) automatic centrallubrication Machine and equipment in conformity with CE-regulations (sample photos) OPTIONS: vibration pads € 192,00 bolster plate € 2.580,00

Condition: new, pressure: 320bending length: 6050column width: 5100daylight: 650stroke lenght (max.): 350column throat depth: 450weight approx.: 23.1004 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 30Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Itodpfx Abjd Ehh Tjcod

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electricity performance: 37,5weight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE!CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Itjdjvfy Sxopfx Abced Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: used, Year of construction: 2011, pressure: 400bending length: 4050column width: 3400electric current: 37,5 KWweight approx.: 25.000messurements (LxWxH): 5750 x 2110 x 3440STOCK CLEARANCE – UNBELIEVABLE PRICE! CNC Press Brake – DURMA AD-S 40400 (4 m x 400 tons) Now available at a special price ex works Böheimkirchen: only EUR 60,000!(Original price approx. EUR 170,000) Technical Specifications:Manufacturer: DURMA Model: AD-S 40400 Year of manufacture: 2011 Bending length: 4,050 mm Pressing force: 400 tons Axes: Y1, Y2, X, R + CNC-controlled crowning Motor power: 37 kW Features & Equipment:CNC crowning system, motorized adjustment via control Upper tool: 1010/A/75°, segmented and gooseneck-style Die: Multi-V die Backgauge: CNC-controlled 2 front sheet supports on linear guides CE-certified laser safety system (Lasersafe) mounted on the upper beam Machine fully complies with CE standards Condition: Very good Itjdpfx Abov Rtg Tscsd One-time offer – available immediately!Only 1 unit in stock – ready for fast delivery – no lead time!Take advantage of this rare opportunity to own a high-performance CNC press brake at a fraction of the original price.

Condition: excellent (used), From 2019, 15 kW, with container PM 32-E (32 m3) Itedpfx Ajyti Ipjbcod

Condition: used, Year of construction: 2009, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, Press container Husmann, with big feeding opening Ijdpfxjwampfe Abcjtd

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW Iedpfx Absfhb Tijcetd 400 V

Year of construction: 2010, condition: used, Static press ATS: 5,5 kW 400 V Itsdpfxohqb Nme Abced 32 A Container: 32 m3

Year of construction: 2011, condition: used, Capacity 20 m3 Itjdpfjiinryox Abced 5,5 kW 400 A Weight 5650 kg

Year of construction: 2021, condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Bending length: 3050 mm Pressing force: 320 t Maximum pressure: 280 bar Ijdpfjyhdrrsx Abcotd Motor power: 18.5 kW Oil tank capacity: 400 l Weight: 14,700 kg

Condition: excellent (used), Year of construction: 2006, Manufacturer: LVD Itjdpfx Aboyhdyijced Model: PPEBturbo 220 Type: PPEB-EFL 220/30 Year of manufacture: 2006 Serial number: 30494 Technical specifications: Max. press force: 2,200 kN (220 tons) Working length: 3,050 mm Clearance between uprights: 2,600 mm Max. ram stroke: 450 mm Max. table–ram distance: 685 mm Throat depth: 450 mm X-axis stroke: 600 mm Table width: 120 mm Speeds: Approach speed: 120 mm/s Working speed: 21 mm/s Return speed: 200 mm/s Drive and hydraulics: Motor power: 37 kW Power supply: 400 V Pump: variable Hydraulics: Bosch / Rexroth SYDFE1 Oil tank: 350 l Other data: Control: LVD Cadman CNC Noise level: 80 dB(A) Machine weight: approx. 14,500 kg

Condition: excellent (used), Year of construction: 1997, Manufacturer: AMADA Europe S.A. Model: HFB 80 Year of manufacture: 1997 Serial number: HFB0 80 25 R970112 Ijdpfjx H Sl Sjx Abcstd Pressing force: 800 kN Maximum stroke: 200 mm Power supply: 415 V / 50 Hz Number of phases: 3 Rated current: 171 A Machine weight: 5750 kg

Condition: excellent (used), Capacity: 2.5 tons Year of manufacture: 2017 Iedpfxow U Auro Abcetd Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Transport wheels included Tools not included in delivery

Condition: excellent (used), Year of construction: 2005, Year of manufacture: 2005 Serial number: 8293 Itedpfsxna S Hex Abcjd Press force: 120 t Bending length: 3100 mm Max. stroke: 260 mm Operating pressure: 240 bar Motor power: 11 kW Power supply: 400 V / 50 Hz / 3 phases Machine weight: 7,500 kg Machine dimensions (L x W x H): 3550 x 1800 x 2800 mm

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Heating system: Infrared Iedpfx Abow A Rdrecetd Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm