Used Hot Runner for sale (3,459)

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately Lredpfx Aiezph N Ae Hor We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Lredpfxovpqp As Ai Hsr Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Condition: new, functionality: fully functional, Year of construction: 2026, Asphalt Hot Box НВ-2 Lredst It Dvepfx Ai Hor With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. SPECIFICATIONS: - Capacity - 1,8 m3 TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Condition: new, Year of construction: 2026, Asphalt Hot Box / Asphalt Recycler НВ-1/Recycler Asphalt Hot Box / Asphalt Recycler HB-1 is designed to maintain the working properties and temperature of hot asphalt during its transportation from the asphalt plant to the place of work and in its process. High quality thermal insulating mineral wool, which is installed around the working tank, is used for thermal insulation. The unit also has the function of asphalt recycling with an infrared heater located at the top. The asphalt is heated on a grate. Lrsdpfx Ajvprxxsi Hjr SPECIFICATIONS: - Volume - 0,4 m3 - Capacity is 2-2.5 tons per 8 hours. - Propane fuel - Consumption - 3-4 kg / h (depending on the outside temperature) - Mechanical control (open fire ignition system)

Condition: new, functionality: fully functional, gearing type: other, fuel type: diesel, color: silver, emission class: none, mast type: other, brakes: other, suspension: other, Year of construction: 2026, Equipment: low noise, trailer coupling, TICAB HB 2 Asphalt Hot Box | Thermal Container for Hot Mix Transport The TICAB HB 2 is a professional thermal hot box engineered to transport and hold hot mix asphalt at working temperature from the plant to the job site with minimal heat loss. With premium insulation and an advanced diesel heating system, it ensures consistent mix quality for superior patching, resurfacing, and pavement rehabilitation. Lsdpfx Aijx Uqt Rs Hjrr Key Features High-efficiency thermal container with premium mineral wool insulation — heat retention up to 12 hours Beckett diesel heating system with automatic temperature control for stable mix temperature in cold weather Mountable on a truck body or trailer frame for flexible job-site mobility Heavy-duty construction for municipal roads, highways, parking lots, bike paths, driveways, and industrial areas Hydraulic lift unloading system and top loading hatch for fast loading and easy discharge Capacity: ~1.5–1.8 m³ (up to ~4 tons of hot asphalt) — ideal for medium to large repairs Applications Road and highway repair and maintenance Pothole patching and resurfacing Hot mix asphalt transport and thermal storage Pavement rehabilitation and paving preparation Supplying hot mix to asphalt pavers on site Why Choose the TICAB HB 2 Reliable temperature control, excellent insulation, and operator-friendly design make the HB 2 a dependable solution for contractors, paving companies, and municipalities that demand consistent hot mix quality and efficient road repair workflows. Contact us today for pricing, delivery options, warranty details, and full technical specifications. Ready for immediate deployment to boost your asphalt repair productivity.

Condition: new, functionality: fully functional, power: 45 kW (61.18 HP), gearing type: other, fuel type: gas, color: green, overall weight: 250 kg, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB HB 1 Asphalt Hot Box & Recycler The TICAB HB 1 is a compact, professional solution for efficient road repair, pothole patching, hot mix transport, and on-site asphalt recycling. Ideal for municipal streets, highways, parking lots, driveways, and industrial pavements. Designed for everyday field work, it keeps asphalt at the right temperature while turning reclaimed material into reusable mix—saving time and cutting material costs. Key Benefits 0.4 m³ capacity for practical, job-site productivity Infrared heating system with propane burner for consistent, even asphalt temperature Recycles old asphalt into workable hot mix, reducing waste and expenses Lrjdpox U Ap Defx Ai Hjr Mobile, durable construction for tough road conditions Simple operation for contractors, road crews, and municipalities Improve repair quality, minimize downtime, and make better use of existing asphalt. Contact us today for pricing, delivery options, and full technical specifications—and upgrade your asphalt repair and recycling efficiency.

Condition: new, functionality: fully functional, power: 4.3 kW (5.85 HP), gearing type: other, fuel type: gasoline, color: red, empty load weight: 150 kg, axle configuration: 1 axle, emission class: none, mast type: other, brakes: other, Year of construction: 2026, Equipment: low noise, TICAB Heat Air Lance HL-1 | Professional Asphalt Heat Tool – Road Repair, Crack Sealing & Surface Preparation Equipment The TICAB Heat Air Lance HL-1 is a high-performance gas-powered heat lance designed for asphalt surface preparation, crack cleaning, preheating joints, weed removal, asphalt softening, and bitumen reheating. A must-have asphalt heat tool for road contractors, paving crews, municipalities, utility companies, and surface maintenance professionals seeking efficient heat applications and improved bonding results. Key Features • Heat air lance / asphalt heat tool for asphalt warming, crack prep, and surface softening • Ideal for pre-repair heating, loosening old asphalt material, surface drying, and bitumen melting • High-temperature flame output for consistent heating of asphalt, bitumen, and sealing joints • Gas-powered design for mobile, flexible operation on job sites • Compact, lightweight, and easy to handle for precision work in tight spaces • Durable construction built for heavy-duty road maintenance applications Applications • Weed removal and surface cleaning ahead of maintenance • Asphalt surface preparation before crack sealing or patching • Preheating asphalt joints and edges for improved sealant adhesion Lrjdpfx Aisx U Ayvo Hsr • Softening old asphalt, bitumen reheating, and material conditioning • Municipal roads, highways, parking lots, driveways, sidewalks, bike paths, and industrial areas Why Choose TICAB HL-1: It is designed to improve sealant adhesion, accelerate repair workflows, and enhance overall pavement maintenance quality — making it a trusted choice for contractors and municipal crews focused on efficient, professional road repair results. HL-1 combines powerful heating performance, mobility, and precision to deliver superior asphalt surface prep and crack sealing readiness. Contact us now for price, delivery options, and full technical specifications. Boost your asphalt prep and repair workflow today!

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 11836, overall weight: 7,000 kg, stack height: 950 mm, type of input current: three-phase, total width: 3,600 mm, total length: 4,300 mm, total height: 1,900 mm, input voltage: 400 V, product height (max.): 2 mm, input current: 50 A, pressing force: 150 t, temperature: 200 °C, We offer this used Gietz FSA 790 hot stamping, embossing, die-cutting machine, year of construction 1989. Manufacturer: Gietz Model: FSA 790 Year of construction: 1989 Lrsdpfx Ajy Iy Uqoi Her If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Hot stamping machine Ledpezq Uuuofx Ai Herr Semi-automatic Mechanical sliding table Temperature and timer control Stamping plate size: 35 x 24 cm Various replacement plates In addition, inking unit included (disassembled)

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Ljdpfx Aezt N R Nji Herr

Condition: used, machine/vehicle number: 008695, Max working length: 2500 mm Max working width: 1300 mm Pressure Exerted: 2 Kg/cm2 No of Pressing cylinders: 4 Lrodpfeztkbpox Ai Hor

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 4,229 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, construction height: 2,395 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Not operational Technical condition: normal Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Battery capacity: 620Ah Battery year of manufacture: 2022 Description: NOT ROADWORTHY!!! NEEDS REPAIR!!! 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift. Ljdpfxozt T A No Ai Herr

Condition: good (used), Cauhe S-IV A 120×160 Hot Stamping Press The machine is fully operational, like new. Made in Spain. Format: 1200x1600mm Weight: 10,000kg Power supply: 380V Motor: 11 kW Impact force: 2 Tm/dm² Equipment: Lredszlaitopfx Ai Her – Pneumatic clutch and brake – Control panel – Full-format heating plate with 3 heating sections – 3 operating modes: continuous, time-delayed, manual – 3 independent foil feeds – Central automatic lubrication – Additional safety guards – Operating tools – Press plate

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Ledpfx Ajzt Iduoi Horr Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: ready for operation (used), functionality: fully functional, Boiler plant for production of hot water suitable for wood driers. Capacity : 1 MW Designed for solid fuel like, wood chips, sawdust, bark Lredpfszt Iycjx Ai Her Plant is available beginning of 2027

Condition: ready for operation (used), Year of construction: 2014, A hot stamping system is available for hot stamping the silver edge on instrument panels. Heating capacity: 5.6 kW, stamping force: 20 kN, max. pressure: 6 bar. Including laminar flow module Spetec Super Silent. Documentation available. On-site inspection is possible. Ledpeuyk S Asfx Ai Horr

Condition: ready for operation (used), Year of construction: 2020, Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible. Lredpfsu Rn Agex Ai Hor

Condition: ready for operation (used), Year of construction: 1965, Embossing pressure: 8000kg, embossing area X/Y: approx. 220mm/310mm, speed: 33rpm, table adjustment: 90mm. Equipment: 2 foil feeds, thermostat, automatic operation with timer for loading time, central lubrication, hand guard, continuously adjustable embossing time, several mounting plates. An on-site inspection is possible. Lrjdpfezukthjx Ai Her

Condition: used, first registration: 08/2012, color: other, Year of construction: 2009, nice and good tipper for asfalt and others. Lsdpfxjzvfv Te Ai Hjrr

Condition: good (used), Year of construction: 2018, Flame-Cutting Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point cross conveyor Number of carriages: 2 clamps NC feed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke cross conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with lowerable discharge table with chute into Lredovzrczspfx Ai Hjr material collection container for discharging small components. Filter unit incl. piping Powerful for the use of carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and V-scoring LANTEK license 11826ä Availability: immediate!

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. Lsdpfxjffc Ufe Ai Herr The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 Lrjdjv Akwgspfx Ai Her No of Pressing cylinders: 8

Condition: used, Year of construction: 2010, operating hours: 3,426 h, functionality: unexamined, pressure: 6 bar, power: 12,600 kW (17,131.21 HP), temperature: 110 °C, operating temperature: 110 °C, total height: 3,025 mm, total length: 6,315 mm, nominal heat output: 12,600 kW (17,131.21 HP), total width: 2,724 mm, insulation thickness: 100 mm, tank capacity: 18,300 l, We offer this Buderus S825L-12600 hot water boiler, in very good condition, manufactured in 2010. Type: S825L-12600 Ljdpfxjzlqb Tj Ai Horr Maximum permissible pressure: 6 bar g Test pressure: 9.6 bar g Maximum permissible temperature: 110 °C Nominal thermal power: 12600 kW Total volume: 11830 l Serial number: 31022150-00-106809 Month/year of manufacture: 08/2010 Manufacturer: Bosch / LI LA If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 1984, Romanian Hot Former AMP 20, AMP 30, AMP 50 lines Press Capacity: 220 tons, 230 and 400 Forming stations: 3, 3 and 4 Forming load: 900 kN, 2500 kN and 8000 kN Bar Diameter: 14 to 28 mm, 18-40, 28-55 mm Max. part outer diameter: 35 mm Cut-off length: 15 to 40, 20-72, 50-150 mm Ram stroke: 110 mm Ejector stroke: 55 mm Ljdpfxotaui Uo Ai Horr Die center distance: 110 mm Production per minute: 12 to 180 Weight: approx. 11, 36 and 90 tonnes Technical documentation: yes Video under power available

Condition: good (used), Year of construction: 2013, MARK ANDY XP 5000 / 13" - 4-color  Year: 2013  Webwidth: 330mm / 13" Equipment:  UNWINDER  4 x FLEXO PRINTING  BST CAMERA  UV-DRYER  HOT AIR  1 x DIE-CUTTING GAPMASTER  1 x DIECUTTING GAPMASTER  100% TUBE SCAN CONTROL  REWINDER  Web edge control  Control Panel  Lot off printing/magnetic cylinder  Anilox Please contact me if you have any questions. Lrodpfx Aijtubz Ue Her Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)