Used Hot Runner for sale (3,540)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902017848, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2015, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, The images are archive images! The vehicle may be in use! Fine-grained steel welded construction in lightweight design, kingpin plate with 2 replaceable kingpins, outer frame slightly angled with load-lock profile for attaching lashing straps. Note: to attach the straps in conjunction with the side walls, the side walls must be opened. 24-ton, 2-speed landing gear, single-side operation, with straight lower section, without lateral thrust compensation, door latch on the side, support wedges with holder, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support foot distance or free rear swivel radius approx. 1930 mm, quarter-shell fenders in front of and behind the axle unit, with anti-splash flaps only on the last axle, rear impact protection, pallet stop on both sides approx. 20 - 25 mm high, in bolted design, loading height is reduced by approx. 20 - 25 mm. BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, actuation 3x brakes (with starting assist up to max. 25 km/h). Floor: Sieve-printed plates approx. 30 mm thick, crossbeams with omega insert, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Bodokyrmiepfx Apaslp Front wall/corner posts at the front: 2,480 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, hydraulic lifting roof with hand pump at each corner post, can be raised by 400 mm. Can be driven with the raised roof, adjustable by 4 x 50 mm upwards. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with the tarpaulin.

Year of construction: 2000, condition: used, Year of manufacture: 2000 Bjdpfx Apet Ag Udeaolp ROTOFLOW 170-N rotary blasting machine from OMSG, featuring an automatic feed tower, manufactured in 2000. Used rotary blasting machine. Continuous belt blasting machine for shot blasting/sandblasting of aluminum die castings, brass or steel forgings, screws, and bolts. Automatic feed tower. Turbine inverter. Special two-position valves. Filter.

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan Blsdpfxew I Uizj Apaop · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: used, Year of construction: 2023, Standard observers: 2° (1931) and 10° (1964), standard illuminants: D65, D55, F11, A, C, color spaces/values: XYZ, Yxy, LCh*, Luv*, ΔE CIE Lab*, ΔE CIE94, ΔL*, Δa*, Δb*, yellowness index according to DIN 6167 or whiteness metrics, spectral range: 400-700nm, spectral resolution: 10nm (internally 3.5nm), spectrometer: holographic grating spectrometer, display: relative values, absolute values or customer-specific values, repeatability: ΔE = 0.05 CIE Lab, repeatability test: 10 measurements of the supplied white standard, memory: non-volatile, more than 1,500 measurements without a PC, ambient temperature: 15-35°C, max. relative humidity: 85%, non-condensing, PC interfaces: USB, RS232, current output: 4-20mA, length: 235mm, width: 220mm, height: 60mm, weight: 1.85kg, including original operating manual, USB flash drive with installation file for "ColorDaTra_IPM" software version 1.94, installation file for update to version 1.95 and license key, last calibrated in 2025. On-site inspection is possible. Bodpfx Apsz R Uwpsaolp

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, Bedpfszw T Sxex Apaelp * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Year of construction: 2012, operating hours: 25,967 h, condition: used, functionality: fully functional, machine/vehicle number: 2525, We offer this used COGEIM TA 30 drum granulator, manufactured in 2012. Machine type: TA30-2892 Serial number: 2525 Year of manufacture: 2012 Minimum air pressure: 5 bar Maximum air pressure: 8 bar Bsdpfozrwy Nsx Apaslp Weight: 18000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. Blodpfx Aoz Dfuvopaep It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation.

Year of construction: 2019, condition: used, KOLBUS EVA-HOTMELT SPINE GLUING UNIT Year: 2019 Configuration: - With rollers - With level control - Technical specifications: Bljdpfs Ahgfcjx Apaop Compatible with: KOLBUS KM 600 perfect binder Suitable for: EVA hotmelt glue

Condition: used, Dust separator, dust extractor, suction unit, dust cyclone, used equipment Overall Dimensions: Width: 1200 mm Depth: 600 mm Height: 1560 mm Inlet Size: 90 mm Bjdpfx Apsyzmiheajlp Outlet Size: 115 mm Equipped with a pneumatic valve

Condition: excellent (used), mileage: 6,69,400 km, power: 316 kW (429.64 HP), first registration: 01/2020, fuel type: diesel, tire size: 315/60 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,000 mm, total width: 2,500 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, hill-start assist, onboard computer, parking heater, power assisted steering, power mirror, second fuel tank, soot filter, spoiler, tachograph, traction control, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Alarm System - Aluminum Fuel Tank - Outside Temperature Display - Heated Mirrors - Passenger Seat - Hands-free Kit - DAB Radio - Sunroof - Roof Spoiler - Differential Lock - Digital Tachograph - Speed Limiter - Air Conditioning - Air Suspension - Air-Suspended Seats - Particle Filter - Radio/CD Player - Sleeper Cab - Side Door - Sun Visor - Lane Keeping Assist - Stability Control - Auxiliary Heater - Automatic Heating System = Additional Information = General Information Number of Doors: 2 Year of Construction: 2020 License Plate: BD-239-T Technical Information Number of Cylinders: 6 Engine Displacement: 12,419 cc Axle Configuration Brakes: Disc Brakes Suspension: Air Suspension Front Axle: Tire Size: 315/60 R 22.5; Max. Axle Load: 7500 kg; Steered; Tire Tread (left): 50%; Tire Tread (right): 50% Rear Axle: Tire Size: 295/60 R 22.5; Dual Tires; Differential Lock; Max. Axle Load: 11500 kg; Tire Tread (left, inner): 70%; Tire Tread (left, outer): 70%; Tire Tread (right, inner): 70%; Tire Tread (right, outer): 70%; Reduction: single reduction Weights Unladen Weight: 7,944 kg Payload: 11,056 kg GVWR: 19,000 kg Functional Body Manufacturer: ZF Interior Number of Seats: 2 Maintenance APK (Technical Inspection): valid until 12/2026 Bjdpfxjzzqxke Apaelp Condition Technical Condition: very good Optical Condition: very good Damage: none

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. Bjdpfx Apsvkf Agoaslp The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: good (used), functionality: fully functional, Processing plant for (track) ballast Blodpfxjtpamgj Apaop 40 cbm feed hopper with push cart OMT 120 kW impact mill with feed and discharge chute Double-deck screening plant 1,400 x 4,000 m with conveyor and stockpile belts Complete electrical installation

Condition: new, 0 1170 x 580 x 580 mm Blsdpfjupxd Djx Apajp operating pressure 2,2 - 8,0 bar dimensions 1,22 x 0,93 x 1,70 m air consumption at 6 bar 350 l/min weight of the machine ca. 0,15 t

Condition: excellent (used), Year of construction: 1996, grinding length 600 mm Bodpfxex Harye Apaslp grinding width 350 mm total power requirement 7,5 kW Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 635 - Z CNC year 1996 Grinding length max. (table movement 660 mm) 600 mm Grinding width max. (cross movement 360 mm) 350 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 600 x 350 mm Table size 820 x 350 mm Max. table load 400 kg Table speed 5 – 35.000 mm/min Cross movement, intermittently 3 – 40 mm Cross-/Vertical quick feed 5 m/min Grinding wheel measurements 300 x 50 x 76,2 mm Grinding spindle speeds, variable 1.000 – 3.000 rpm Grinding spindle-drive approx. 7,5 kW Total electrical load approx. 15 kW - 400 V - 50 Hz Weight approx. 2.600 kg Accessories / Special Features: • SIEMENS CNC control model 840 D with comprehensivel GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming also of complex grinding wheel profiling and easy linking of grinding cycles. • All standard grinding-programms and cycles as surface and multiple surfaces grinding with roughing-finishing-sparkout- return, plunge in grinding, automatic dressing cycle with compensation, etc. • electronic handwheel for 3 axis; cross feed (Z) and infeed (Y) effected by ball screw drive. • Table movement is actuated by belt drive (Z), which allows both very high and very low table speeds and is also ideal for profile grinding. • Hydraulically upwarding diamond dressing device mounted on the left side of the table (also for profile dressing); additional fixed dresser with automatic dressing cycle, including compensation. • Mounted sinus tilting magnetic plate 600 x 200 mm, fine pole division. • Separate paper band coolant filtration unit, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: ready for operation (used), functionality: fully functional, Used take-away conveyor from BVM Brunner, removed operationally from a process. Ready for immediate use. Bedpoxzzlbefx Apaslp

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 15 h, Precise Profile Measuring Instrument | Excellent Condition | Ready for Immediate Use For sale is a Chotest SJ-5760P, a high-precision contour measuring instrument designed for geometric profile analysis in quality management, toolmaking, mechanical engineering, and research. This unit provides accurate measurements with extended travel ranges and features a stable granite base for reliable results. — Condition • Pre-owned, technically inspected • Fully operational • Very well maintained — Technical Highlights – Chotest SJ-5760P Travel Ranges • X-axis: 0–200 mm • Z-axis: 0–450 mm • Device dimensions: 800 × 450 × 1100 mm • Weight: 220 kg — Bledpfx Ajx Db Stopaop Profile Measurement (SJ-5760P) • Measuring range Z1: ±25 mm • Resolution: 0.001 µm • Measurement direction: Top / Down • Measuring speed: 0.05–5 mm/s • Positioning speed: X/Z up to 20 mm/s • Measuring force: 10–150 mN, adjustable • Guideway deviation: ≤1 µm / 200 mm Accuracy • X-axis indication error: ±(0.5 + 0.015L) µm • Z1-axis indication error: ±(0.5 + 0.05H) µm • Distance: ±(0.8 + 0.02L) µm • Radius: ≤(1 + R/15) µm • Angle: ≤±45’’ — Key Features • Ideal for precise contour and profile measurements • Extremely high vertical resolution (0.001 µm) • Very stable granite base for low-vibration operation • Large travel ranges for diverse component geometries • User-friendly and reliable measuring technology • Suitable for micron-accurate form measurement in both laboratory and production environments

Condition: excellent (used), machine/vehicle number: 3.278-870805-1, Part No.: 42.35.53 Technical data and description: see pictures Bsdpeh Eii Tsfx Apaslp

Year of construction: 2021, condition: new, Fiber delivery cable with instalation ( splicing )on your IPG, Maxphotonic , Raycus, GW.... laser source. We are doing reparation IPG laser module in your place with warranty. Bodpfsg D Urgjx Apajlp Speaking English and Serbian language.

Condition: used, New: No Part suitable for: trucks Price: On request Blsdpfxjytfdge Apajp VAT/margin scheme: VAT deductible

Condition: used, This listing is for a Beckman Coulter DU 800 UV-Vis spectrophotometer. The unit is in full working condition and is ready for immediate release. The Beckman Coulter DU 800 UV-Vis Spectrophotometer is a versatile and high-performance instrument designed to meet the needs of a variety of scientific applications, including complex analyses as well as routine measurements. Its capability to operate across a broad wavelength range makes it a valuable asset in fields such as life sciences, biotechnology, academia, and pharmaceuticals. Key Features: Wide Wavelength Range: The DU 800 operates efficiently between 190 to 1100 nm, accommodating a broad spectrum of applications in UV-Vis spectroscopy. Narrow Bandwidth: With a bandwidth of ≤ 1.8 nm, it offers high-resolution measurements, crucial for accurate qualitative and quantitative analyses. Focused Micro-Beam Design: This innovative design results in a wide linear range and improved performance, particularly beneficial when working with small volume samples or precious materials. Bledpoxxz R Ssfx Apaop Enhanced User Experience: The integrated interface improves usability, allowing for immediate access to system functions and continuous display of status and method parameters, ensuring users can monitor their assays effectively. Efficiency Boosting Schedulers: The inclusion of a source scheduler automatically switches between UV and visible lamps at designated times, enhancing the efficiency of the instrument during long-term operations. Technical Specifications: Dimensions: 69 cm (27 inches) width x 53 cm (21 inches) height x 26 cm (10 inches) depth, making it a compact solution for lab environments. Weight: Weighs 37 kg (81 pounds), providing a solid and robust build suitable for laboratory use. Line Voltage: Compatible with a range of 110 – 240V +10%, allowing for global use without the need for voltage converters. Frequency: Operates at standard frequencies of 50/60 Hz. Power Consumption: Typical power usage is 200 watts, making it relatively energy efficient. Operating Temperature Range: Can function optimally in a temperature range of +15 to 40°C (59 to 104°F). Humidity Requirements: Maximum relative humidity of < 85%, not to exceed 32.5°C WBT, ensuring device longevity and performance stability. Benefits: Versatile Applications: The DU 800 is capable of handling a diverse range of applications, from routine quality control to research and development tasks in laboratories. Precision and Reliability: Its advanced optics and design ensure precise and reliable measurements, making it ideal for quantitative analyses in various scientific disciplines. User-Friendly Design: The intuitive user interface contributes to ease of operation, reducing the learning curve for new users, while providing seasoned researchers with efficient access to controls. Cost-Effective: Designed for longevity and reliability, the DU 800 is an investment that can enhance laboratory productivity without exorbitant running costs.

Condition: excellent (used), Year of construction: 1990, Description to follow! Blodoxzk Ilspfx Apajp

Condition: used, Year of construction: 2006, functionality: fully functional, The PowerShot allows for large quantities of chocolate to be deposited, with or without pre-mixed ingredients. In addition to its top quality, the PowerShot impresses with its performance in dot, band, or one-shot depositing. The working width is 1300 mm. Key data: • Type: Bühler depositor PowerShot, one-shot/drop depositor • Working width: 1,300 mm • Year of manufacture: 2006 • Bühler commercial number: 064200.010 • Design: complete V4A stainless steel, weight approx. 1,000–1,500 kg • Condition: mechanically complete; currently not connected, without software/control (display missing). With connection and programming, it is likely to be functional according to our assessment. • Control cabinet/machine: untouched – nothing has been removed or modified. We have deliberately removed the covers so that no pests can nest and we can regularly inspect everything. • Location: Upper Austria (AT), loading on site possible. Bedexdt Dhepfx Apajlp No modifications have been made to the control cabinet or the machine; the covers have been removed to prevent pests from entering and to allow us to regularly inspect everything.

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Ersa Hotflow 3/20 Year of manufacture: 04/2011 Refurbished in 2024 Dimensions: Length: 6,265 mm Width: 1,201 mm Bsdpfxeyf N Uye Apaslp Height: 1,375 mm Weight approx. 1,900 kg Conveyor System: Working width: 45–516 mm, automatically and steplessly adjustable Clearance height: +35/-37 mm Center support, automatically and steplessly adjustable Conveyor speed: 20–200 cm/min Pin chain conveyor available with 3 / 4 / 5 mm pin length options Process Zone: Process length: 4,840 mm Heated length: 3,725 mm Cooling length: 1,115 mm Heating System: Up to 20 convection heating cassettes (Preheating zone up to 14 cassettes, reflow zone 6 cassettes) Airflow per module adjustable up to 500 m³/h Nominal power per module: 3.3 kW Nominal power last module: 4.5 kW Cooling: Up to 2-level cooling zone (ambient air) Electrical Data: 400 V, 3 phases, N, PE, 50/60 Hz Continuous operating power: approx. 12–16 kW Exhaust: Extraction capacity: Chimney at system inlet 300 m³/h; chimney at system outlet 400 m³/h, both with monitoring function

Condition: new, Year of construction: 2025, Laser Engraving Software PhotoGraV, current software version 3.1 Software for the preparation of photo data for laser engraving Blsdpfxocwgq Nj Apajp With "PhotoGraV" you prepare your photos optimally for the laser output and optimize these with regard to the material to be engraved in advance, before you send the file to the laser. The software provides optimal results and this without time-consuming detours and special knowledge in image processing. Delivery range: PhotoGraV software, PDF manual, bonus seminar as PowerPoint presentation and more. applications Delivered as a download (on request on DVD, plus shipping costs). Upgrade from version 2.xx available for: 173, - Euro plus VAT

Condition: good (used), Power cable, solar cable -Energieflex: PV1-F PV1000-F -1x4 mm³: 0.6/1 kV -Dimensions roll: Ø 390/300 mm Blsdpfxjfdvp Ae Apasp -Weight: 28 kg