Used Hq 500 for sale (15,958)

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x Cedpfx Acj Ahgrtjqjhd MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, rotary table diameter: 450 mm, position of the milling head: Schwenkbar (45°), table diameter: 450 mm, total length: 5,600 mm, gear diameter: 500 mm, total height: 3,100 mm, total width: 3,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 340 rpm, table bore: 125 mm, spindle speed (min.): 80 rpm, travel distance X-axis: 325 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 14,800 kg, distance table to spindle center: 350 mm, tool diameter: 200 mm, controller manufacturer: Siemens Sinumerik 840D sl, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A Pfauter PE 500 for the economical production of straight and helical spur gears up to module 12 and 500 mm in diameter – completely overhauled by SerWeMa with Siemens Sinumerik 840D sl, equipped with a gripper unit and a 32-position workpiece storage for unmanned operation. The machine is ready for operation in our hall in Chemnitz: you can inspect it under power, and if desired, we will mill your own sample part and you can take delivery of the machine here. No delivery time, no risk. Sold by Serwema Retrofit Solutions, the company that carried out the overhaul and knows the machine inside out. The general overhaul included complete geometric overhaul by grinding and scraping, new roller bearings in the main drive and in the milling head, measuring and reconditioning the worm gear, overhauled or new ball screw drives, overhaul of hydraulics, lubrication and coolant system, and new electrical equipment with Sinumerik 840D sl, Sinamics S120 and new axis motors. An electronic generating gear controls all generating and single-part machining processes, and an NC-controlled crash recovery protects the tool and workpiece in the event of a power or phase failure. New paint in RAL 7035/5015 with oil and coolant resistant two-component paint, acceptance of geometry according to SerWeMa protocol based on DIN ISO 6545. Chsdpfx Acez Et E Esqsd The machine controls six CNC axes: X radial, Y tangential, Z axial, A milling head swivel, B milling cutter drive and C table drive. The SerWeMa gear cutting software guides you through workpiece and tool data via masks, without the need for programming: up to three position-oriented gearings per workpiece, each with its own tool, up to three cuts per gearing with simultaneous or counter-rotating movement, form corrections for convex, conical and convex-conical profiles, lead-in and lead-out phase correction, chamfer milling, dimension correction via tooth width, two-roll or two-ball gauge, measuring stop, shift strategy with defect management per generating cutter and cutting force monitoring with automatic retraction. Technologies: generating milling, single-part milling and worm gear milling both radially and tangentially. A hand-held device with a handwheel allows setup directly in the working area. Technical data: max. workpiece Ø 500 mm, max. module 12, max. milling cutter Ø 200 mm, max. milling cutter length 240 mm, shift travel 200 mm, milling cutter speed 100–450 rpm, swivel angle +25°/−45°, travel radial 325 mm (axis distance 25–350 mm), travel axial 400 mm (310–710 mm), table diameter 450 mm, table bore 125 mm, connection power approx. 60 kVA. Installation dimensions incl. automation approx. 7.2 × 4.5 × 3.3 m, weight approx. 16.8 t. Equipment: machine enclosure, chip conveyor, gripper unit with two grippers, workpiece storage with 32 positions, preparation for emission extraction (150 mm nozzle, Harting connector on the machine roof). Documentation complete in German: operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagrams. Serwema optionally offers: trial part milling in our factory, additional milling arbors, assembly and commissioning at your location, operator training and a control system upgrade to Sinumerik ONE. Spare parts and service come from a single source, worldwide, even after the purchase.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs Csdpfxox Adn Uj Acqohd ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: good (used), Mosca RO-M-P5 Fusion 650×500 Strapping Machine The machine is 100% functional and ready for production. Manufacturer: Mosca, Germany. An indispensable piece of equipment for shipping departments, ideal for securing heavy packages such as those containing leaflets or catalogs. The 5mm PP (polypropylene) strap reinforces the packaging and creates a handle, making it easy to grip and transport the package. Control panel Adjustable strap feed length and tension force Chjdsz S Uqdepfx Acqod Power supply: 230V Weight: 240 kg

Condition: good (used), Fetzel TLM 500 V4 Laminating Machine The machine is 100% functional and in perfect condition. This is an advanced, high-performance automated system, well-suited for commercial lamination services. Manufactured in Austria. Technical specifications: Max. sheet size: 520 mm x 720 mm Min. sheet size: 200 mm x 290 mm Min. paper weight: 120 gsm Cjdpfx Acjz S Uyxsqjhd Max. paper weight: 400 gsm Operating temperature: 80–130°C Max. operating speed: 35 m/min Feeder stack height: 600 mm Weight: 700 kg Power supply: 380 V Installed power: 7 kW Requires an additional 6-bar air supply. Features a large-diameter, chrome-plated steel cylinder that ensures a stable temperature. Equipped with pneumatic pressure, sheet separation, and an automatic high-pile feeder. Sheet feeding accuracy: ±2.0 mm. The feeder unit can be moved aside, providing excellent access to the cylinders. Includes an expanding shaft for film rolls, mounted on a swing-out arm. Features a color touchscreen control panel for easy operation. Includes a sheet-straightening module.

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 3,500 kg, fuel type: electric, – Year of manufacture: 2015 – DTR, CE – Capacity up to 20 m³/h Chsdpfe Ah Eanox Acqod TECHNICAL PARAMETERS: – Width of feeder inlet: 500 mm – Height of feeder inlet: 180 mm – Diameter of knife shaft: 450 mm – Width of shaft: 515 mm – Two knives – Knife length: 515 mm – Toothed draw roller at the bottom – Power of motor for the bottom toothed draw roller: 2.2 kW – Toothed draw roller at the top – Power of motor for the top draw roller: 2.2 kW – (Length / width) of the feeding conveyor belt: 5000 x 520 mm – (Length / width) of the discharge conveyor belt: 10500 x 220 mm – Power of motor for the discharge conveyor belt: 3 kW – Belt feed forward / backward Transverse chain feeder / buffer for the shredder: – Overall length: 10600 mm – Width of feeder: 1750 mm – Distance between outermost chains: 1650 mm – Distance between chains: 550 mm – Height of feeder from base: 1500 mm – Motor power: 4 kW – 4 chains Transport dimensions: – Length: ~1300 cm – Width: 240 cm – Height: 225 cm – Weight: ~3500 kg

Condition: good (used), Rilecart Linea F-500 Perforator This machine is in very good condition and ready to use. Electric drive, foot pedal control. Includes a 3:1 perforation tool, 4x4mm hole and a cutout for the hanger. The tool is divided into 3 independent modules. Manufacturer’s description: Perforating machine with a working width of up to 530 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (2.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a cutout for the hanger 380V power supply Weight: 195 kg Chedpjz Sluzofx Acqod

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Cjdpfxoz Icznj Acqshd Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system.

Condition: used, functionality: fully functional, Year of construction: 2007, table height: 1,050 mm, overall weight: 1,090 kg, total length: 1,350 mm, total height: 1,824 mm, HYDRAULIC PUNCHING MACHINES PUMA 55 Technical data: Punching force 55 tons Max. punching capacity Ø 40×10 mm Sheet size S / SD 500 / 750 mm Working height S / SD 1060 / 810 mm Used, fully functional punching machine Chjdpe Ahp Aiofx Acqed I flange 100-300 mm I web 100-500 mm U flange 100-300 mm U web 120-260 mm Motor power 5 kW Cycles per minute (20 mm stroke) 37 Maximum stroke 60 mm Includes a comprehensive set of punches and dies. The punching machine can be inspected while powered up until November 17, 2026; after that date, it can only be inspected without power. Manual available in German, with diagrams for the electrical connection.

Condition: excellent (used), Price quoted per unit. For sale: Karl Tränklein ZW 500 adhesive roller coating machine. This device is designed for the uniform application of adhesive to paper, cardboard, corrugated board, leather, fabrics, and other sheet materials. Thanks to its precise roller arrangement, it ensures an even layer of adhesive and high-quality results. Chodpfx Ajz Sm Uwocqsd The machine features a robust, German-made construction and adjustable pressure and adhesive application rate. It is ideal for bookbinding shops, printing plants, and packaging production. Technical specifications: Manufacturer: Karl Tränklein GmbH Model: ZW 500 Year of manufacture: 1990 Serial number: 8083 Working width: 500 mm Power supply: 380 V / 50 Hz Motor power: 0.25 kW Adjustable adhesive application rate Chrome-plated working roller Stable, cast iron construction Made in Germany Visual condition as shown in the pictures.

Condition: excellent (used), Year of construction: 2009, operating hours: 18,493 h, functionality: fully functional, Base machine CTX alpha 500, driven tooling, G-axis, measuring probe in X-axis Control system: Siemens CNC control system SIEMENS 8400 ERGOLine Options Opposing spindle ISM as. C, Y-axis, instead of tailstock Coolant and chip disposal Coolant system 8/20 bar, 600 L, band filter Coolant spray gun Equipment for bar machining Package for bar machining CTX alpha 52 mm Main spindle reducing sleeve Short bar loader magazine, IRCO, ILSRBK 100/12 Clamping device for main spindle 3-jaw chuck, BBD 21066, manufacturer SMW Collet chuck KSZCC 60, manufacturer SMW Cjds Ahi Ngjpfx Acqehd Clamping device for opposing spindle Collet chuck KSZCC52, manufacturer SMW 3-jaw chuck, BBD 170-52, manufacturer SMW Documentation Documentation, delivery list, technical documentation DMG Powertools DMG Netservice - on board Special designs Swiveling scraper for chip conveyor, manufacturer Bürener, SP63/30225 Tool spindle, 90° angular geared double spindle head, 2 pieces, 105465 Drill bar holder, 6 pieces, 085822 Multiple holder, form 2, 1 piece, 114008 4-fold holder for Y-machine, 1 piece, 1530200Y Multiple holder, form D130x20, 4 pieces, 114013 Reducing sleeve, 8 mm, 2 pieces, 100244 Reducing sleeve, 10 mm, 2 pieces, 100245 Reducing sleeve, 12 mm, 2 pieces, 100246 Reducing sleeve, 20 mm, 3 pieces, 100248 Reducing sleeve, 25 mm, 2 pieces, 100249 90° adapter, left, 2 pieces, 0E5390 90° adapter, right, 2 pieces, 085407 Cylindrical shank holder, form E230X25, 1 piece, 113985 Tool holder with cylindrical shank, form E3/E430x25, 4 pieces, 113880 Actuating key for dovetail, nut ER25, 1 piece, 105762 Collet chuck holder d=32, ER25, 2 pieces, 107846

Condition: excellent (used), For sale: Bernardo KFM 500 M edge chamfering machine, designed for precise chamfering and deburring of parts made of steel, stainless steel, aluminum, and other metals. This machine is ideal for preparing parts for welding, removing sharp edges, and creating even chamfers. Its robust construction and adjustable chamfering angle ensure accurate and repeatable machining. The machine is sold with the operating manual and a set of cutting blades, as shown in the pictures. Technical data: Manufacturer: Bernardo Country of manufacture: Austria Model: KFM 500 M Year of manufacture: 07/2019 Machine number: PWA-190707 Type: edge chamfering machine Motor power: 0.55 kW Power supply: 400 V Frequency: 50 Hz Rated current: 1.48 A Recommended protection: C16 Chedoz Sm U Tjpfx Acqod Weight: 33 kg Application: The device is designed for: chamfering edges, deburring parts, preparing material for welding, machining steel, stainless steel, and aluminum, creating precise chamfers for welds. Included: Bernardo KFM 500 M chamfering machine, operating manual, set of cutting blades (shown in the pictures), other items shown in the pictures. Condition: The device is used and in good visual condition. Normal signs of wear and tear are visible, consistent with its use. The machine is sold exactly as it is and with all the components shown in the pictures.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1, total height: 3,000 mm, total width: 3,000 mm, total length: 40,000 mm, overall weight: 40,000 kg, type of input current: three-phase, input voltage: 360 V, year of last overhaul: 2026, transport length: 12,000 mm, noise level: 70 dB, protection type (IP code): IP46, transport width: 2,500 mm, Equipment: documentation/manual, 21-STAGE LINE FOR PET BOTTLE RECYCLING, INCLUDING SORTING, WASHING, CLEANING, DEGREASING, LABEL REMOVAL, SHREDDING, AND DRYING. Chedpfx Acsz Sypljqod

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 EDM machine – in excellent technical and visual condition The machine has been thoroughly and professionally overhauled in our workshop and is in very good condition both technically and visually. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check using a laser measuring system were performed. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine is also in a very well-maintained visual condition. The generator and control unit were cleaned and technically inspected. The air conditioning unit of the generator was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is immediately ready for operation and is ideal for reliable production. Technical data: Ingersoll (OPS Ingersoll) EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of construction 2014 Control system EAGLE Powertec PC/NC 3060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld device Manual eroding with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Chodpfxs Afg H Ne Acqed Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 04.11.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: Cedpfx Acsztxt Hsqohd - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Lead screw and feed spindle lathe Manufacturer: Konventa Model: 500 x 2000 mm Year of manufacture: 2001 Center height: 250 mm Turning length: 2000 mm Rapid traverse 1 closed steady rest 1 open steady rest Chodpfj Ahkc Nox Acqod Lighting Tailstock, MK 5 The machine is still very accurate.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition. Swinging diameter over the bed: 500 mm Distance between centers: 780 mm X-axis travel: 200 mm Y-axis travel: 80 mm Csdpfs Abxwfox Acqshd Control system: Siemens 840 Total operating hours: 26,501 h Max. turning length: 500 mm Maximum turning diameter: 200 mm Turning diameter over the bed (max): 500 mm Distance between centers: 780 mm Maximum spindle speed: 6000 rpm Workpiece weight: 45 kg Weight: 4500 kg Filtration system Includes a CNC Spacesaver SS 2500 bar feeder (2018) Inspection in operation is possible by prior arrangement.

Condition: reconditioned (used), functionality: not functional, clamping force: 500 kN, screw diameter: 25 mm, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 375V 500-100 injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Csdpfx Aj Ah R T Ujcqshd Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 Csdpfx Aco Afnc Esqehd - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: new, TECHNICAL DATA: - Base area: 20,000 x 15,000 mm [other configurations available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm [customizable] - Flooring: chipboard 38 mm P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice, powder-coated - Condition: new The mezzanine platforms can be extended within the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Support columns - Main and secondary beams - Cross bracing - Flooring - Fixing materials Price examples: 25 m² | Area: 5,000 x 5,000 mm | €2,445.00 net, plus transport and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,335.00 net, plus transport and VAT 75 m² | Area: 5,000 x 15,000 mm | €6,170.00 net, plus transport and VAT 100 m² | Area: 5,000 x 20,000 mm | €8,035.00 net, plus transport and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,945.00 net, plus transport and VAT 150 m² | Area: 10,000 x 15,000 mm | €11,415.00 net, plus transport and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,985.00 net, plus transport and VAT 300 m² | Area: 20,000 x 15,000 mm | €21,425.00 net, plus transport and VAT 400 m² | Area: 20,000 x 15,000 mm | €28,155.00 net, plus transport and VAT 500 m² | Area: 20,000 x 25,000 mm | €33,935.00 net, plus transport and VAT Other configurations available Optional accessories: - Handrail - Flush wall connection - Staircase - Transfer station - Impact protection - Diagonal braces instead of cross bracing (at extra cost) YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ INDIVIDUAL PLANNING & CUSTOM MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to surface area, load capacity, installation height, and intended application. Our planning department will prepare a customized, non-binding offer based on your specifications. Whether a new build, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the product. This item is available for collection. Delivery or shipping is available at additional cost. Extra charges depend on the delivery location and shipment size and can be quoted individually. PAYMENT TERMS Payment terms to be agreed upon when ordering. The price is quoted per unit/net price or as stated in the description text (plus VAT). You will of course receive an invoice indicating VAT. Cjdsxpii Ropfx Acqjhd ✅ Four wins – The DLK success factors – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 20,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm [customizable] - Floor covering: 38 mm particle board, P6 grade, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The mezzanines can be extended in the specified grid as standard. Other sizes and heights available upon request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: 25 m² | Area: 5,000 x 5,000 mm | €2,345.00 net, plus transport costs and VAT 50 m² | Area: 5,000 x 10,000 mm | €4,135.00 net, plus transport costs and VAT 75 m² | Area: 5,000 x 15,000 mm | €5,835.00 net, plus transport costs and VAT 100 m² | Area: 5,000 x 20,000 mm | €7,645.00 net, plus transport costs and VAT 100 m² | Area: 10,000 x 10,000 mm | €7,555.00 net, plus transport costs and VAT 150 m² | Area: 10,000 x 15,000 mm | €10,985.00 net, plus transport costs and VAT 200 m² | Area: 10,000 x 20,000 mm | €14,175.00 net, plus transport costs and VAT 300 m² | Area: 15,000 x 15,000 mm | €20,515.00 net, plus transport costs and VAT 400 m² | Area: 20,000 x 20,000 mm | €26,675.00 net, plus transport costs and VAT 500 m² | Area: 20,000 x 25,000 mm | €30,035.00 net, plus transport costs and VAT Further versions available. Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection Codpfjxpic Rsx Acqshd - Diagonal struts instead of bracing crosses, at extra cost YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. The additional costs depend on the place of delivery and shipping volume and can be quoted individually on request. TERMS OF PAYMENT Terms of payment must be agreed upon in the event of an order. The price is per unit/net price or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us if you have any questions. 'Vier gewinnt' – The four success modules of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), For sale: an industrial deburring machine from the German company Rolei Eisenblätter GmbH, model PEF 500. This device is designed for the precise removal of burrs, chamfering, and preparing the edges of steel, aluminum, and other metal parts. Manufacturer: Rolei Eisenblätter GmbH, Germany Model: PEF 500 Robust, steel construction V-shaped work table, ideal for guiding components Electric drive with safety switch Application: edge finishing, chamfering, weld preparation, burr removal after cutting and machining Cjdpfx Asz Slc Escqshd The machine is in good working order and technical condition. The construction is very stable, making it ideal for workshops, metalworking shops, tool rooms, and serial production.

Year of construction: 2017, operating hours: 29,259 h, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Type: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Csdpe Ahkfnofx Acqjhd Technical data: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Operating hours: approx. 29,259 h Spindle hours: approx. 7,351 h Condition: Used Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping device, Ø 77 mm - Differential pressure clamping for the main spindle - 16-station disc-type turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter unit (filtration fineness 40 µm) - Level monitoring - Connection port for oil mist separator - Coolant spray gun - TurnPlus Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Price quoted per unit. Professional LeCroy 9354AL digital oscilloscope designed for advanced measurements and diagnostics of electronic circuits. The device is equipped with 4 measurement channels, a 500 MHz bandwidth, and a high sampling rate, making it suitable for research laboratories, electronics service centers, industrial automation, and R&D departments. Technical specifications: • Manufacturer: LeCroy Chjdpfx Acoz Sm Eusqjd • Model: 9354AL • Type: digital oscilloscope • Bandwidth: 500 MHz • 4 measurement channels • Sampling rate up to 2 GS/s • Acquisition memory up to 8 Mpts • BNC inputs • Built-in CRT screen Condition: Used device, fully functional. The oscilloscope starts up correctly and displays waveforms. Normal signs of wear and tear are visible, resulting from use and storage. Note: One of the plastic housing elements at the back has a crack. The damage is purely cosmetic and does not affect the device's operation or performance parameters.

Condition: excellent (used), For sale: Mannesmann Dematic AG electric chain hoist, model DKUN 5-500 K V2. A robust, industrial-grade hoist manufactured in Germany, designed for lifting loads. The set includes a chain and hook, as shown in the pictures. Technical specifications: Manufacturer: Mannesmann Dematic AG Type: DKUN 5-500 K V2 Lifting capacity: 1/1 – 0.50 t / 2/1 – 1.00 t Lifting speed: 15.0 / 7.5 m/min Chain length: 11 m Motor power: 1.40 kW Power supply: 380–400 V Frequency: 50 Hz Current: 4.00–4.20 A Chsdpfx Acsz Sny Ejqjd Motor speed: 2720 rpm Protection rating: IP55 Chain: 5.3 × 15.2 8DK Factory number: 63159709 Ident-No.: 836 334 44 Year of manufacture: 2000 Weight: approx. 39 kg Country of manufacture: Germany Condition: Used hoist, in the condition shown in the pictures. Important information: one of the mounting bracket/ear elements is partially broken, which is clearly shown in the pictures. This damage does not affect the operation or performance of the hoist. Sold exactly as shown in the pictures. PRICE INDICATED IS FOR 1 UNIT.