Used Hss for sale (269)

Condition: as good as new (ex-display), functionality: not functional, Vertical drilling machine with feed gripper system for material positioning. WITHOUT control system and therefore not operational. Control cabinet is available but partially incomplete. Operating manual and circuit diagrams are available. WORKING RANGE Round material: 20 mm – 150 mm Square material: 20 mm – 140 mm Flat material (width): 20 mm – 240 mm Flat material (height): 5 mm – 140 mm DRILLING UNIT Vertical from above Min. drilling diameter: 6 mm Max. drilling diameter: 25 mm Tools: HSS drills only Spindle speeds: 380 rpm – 1,600 rpm Rapid traverse/return: max. 11,000 mm/min Drilling feed: 10 – 1,500 mm/min Drill slide positioning: max. 17,000 mm/min DRIVE POWER Frequency controlled (87 Hz characteristic curve): 2.6 kW MANUAL TOOL CHANGE Quick-change tool holder: MK3 WORKPIECE CLAMPING Horizontal: max. 5.6 kN FEED GRIPPER Stroke length: 670 mm Feed speed: 6 – 60 m/min Return speed: 60 m/min Iisdpfx Ajy At Iyogysh AIR CONSUMPTION Approx. 300 l/min MACHINE DIMENSIONS (L x W x H): approx. 1,610 x 1,120 x 2,400 mm WORKING HEIGHT above floor: 1,040 mm WEIGHT Machine without accessories: approx. 1,600 kg COMPRESSED AIR CONNECTION Customer side (for air cooling system): 6 – 8 bar

Condition: excellent (used), Year of construction: 1985, Ref:11083 . 1985 COMO 220 MC2 Guillotine. Swedish built heavy-duty guillotine for accurate cutting of paper and heavier substrates. Refurbished 2010 and upgraded to computer programme. Comprising; Right side table to facilitate rear loading of cutting bed Central air table Steel side tables Computer programme cut control, with keypad input of data Twin cut control buttons Variable pressure clamp control Swift knife change system and adjustment Powered variable speed back gauge I.R. light beam guarding to UK HSE spec. 2 x HSS knives Including knife change tools and accessories. Specification: Cut width, Max: 220 cm Cut depth, Max: 220 cm Clamp opening :18.5 cm Isdsy Awy Hepfx Agyoih Electrics: 415V, 30A, 50Hz

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Isdperzfh Hsfx Agyeih Very good condition

Condition: used, empty load weight: 9,290 kg, maximum load weight: 32,710 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2017, next inspection (TÜV): 07/2027, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 2 pairs of wheel recesses, lashing eyes, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Iedjz R Tidepfx Agysih

Condition: used, Year of construction: 1985, cutting diameter 340 mm dimensions of saw-blade 4860 x 32 x 1,1 mm cutting range square 340 x 340 mm cutting speed 17 - 120 m/min drive motor 4 kW weight of the machine ca. 2,5 t dimensions ca. 2600 x 2600 x 1650 mm ncl. chip conveyor and chip tray Hydraulic bundle clamping device incl. electrical circuit diagrams the previous owner only sawed at one speed Adjustable cutting pressure valve HSS bimetal saw band Hydraulic material and saw band tensioning with electrical monitoring Automatic height adjustment of the saw frame Automatic adjustment of the movable band guide arm Electrical piece counter Ijdpswyfa Aefx Agyoih Digital display of the dimension preselection Constant, hydraulic clamping of the carbide band guides

Condition: used, maximum load weight: 12,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2013, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 37 m³, total length: 8,650 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2013, Equipment: ABS, tail-lift, * Swivel-wall superstructure, Orten Topliner * Cargo area dimensions: 6,800 x 2,480 x 2,200 mm * Superstructure certified according to VDI 2700 and DIN EN 12642 Code XL * Beverage certificate Iiodpfx Ajzrqz Hegyjh * Draught beer certificate * 4 rows of cargo securing * 2,000 kg Bär tail lift * SAF axles * Air suspension * Extendable drawbar coupling * Tires: 385/55 R 22.5, 70-80% tread depth

Condition: excellent (used), Year of construction: 2015, Technical specifications: Welding robot with 3 axes Number of axes: 3 Travel range: Longitudinal travel: 4,200 mm Transverse travel: 1,200 mm Vertical travel: 1,000 mm Rotary head with motorised tailstock Centre height: 980 mm Centre distance: 4,500 mm Carrying capacity of 1 rotary device: 3,000 kg Iijdpfxoymnqpo Agysh Power source: FRONIUS Transpuls Synergic 5000 MIG/MAG Welding torch cleaning station: ABICOR BINZEL The seller assumes no liability for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any guarantee or warranty.

Condition: good (used), amount 1 STK Dimensions (HxWxD) 300 x 190 x 190 mm diameter 60 mm -> Gear hobbing cutter with HSS cutting material Iiodpfx Agjzuumrjyeh -> Module 18 20°1 gg Lks. -> HSS-C 70.251VF

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: MX7_990126, grinding spindle motor power: 38,000 W, power: 38 kW (51.67 HP), workpiece diameter (max.): 300 mm, disc diameter: 203 mm, 5-axis CNC tool grinding machine – available used or refurbished. High-performance production machine with a polymer concrete bed (ANCAcrete), directly driven 38kW spindle, 6-position disc changer, automatic pallet loading (max. 520 tools, 15s), and steady rest preparation. Ideally suited for the production of carbide and HSS tools in a production environment. !Offer only available in Europe, Africa, and the Middle East! Iedsq Sud Repfx Agyjih

Condition: excellent (used), HSS saw grinder LOROCH model Ekostar 760 year 2008 Iiodpfow Hrvqox Agyjh

Year of construction: 2004, condition: ready for operation (used), travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 810D Powerline, overall weight: 1,800 kg, total width: 1,800 mm, total height: 2,000 mm, spindle motor power: 4,000 W, product length (max.): 1,800 mm, spindle speed (max.): 8,000 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2004. This AVYAC NC240 features a maximum tool diameter of 40 mm and a sharpening length of 950 mm. It is compatible with HSS and carbide materials, equipped with an automatic touch probe for precise tool positioning. The machine also includes programmable indexing for variable teeth/flutes and an integrated oil mist extractor for effective mist control. If you are looking to get high-quality grinding capabilities, consider the AVYAC NC240 machine we have for sale. Contact us for further details. • A (workhead rotation): 360° continuous • B (pivot): -45° to +45° • C (grinding wheel incline): 360° • Workpiece capacity: • Diameter range: 2–40 mm • Max length: 300 mm • Grinding wheel diameter: 150 mm • Number of CNC axes: 4 (A, B, C, X) + 1 manual (Y) • Resolution: 0.001 mm / 0.001° • Positioning accuracy: ±0.005 mm • Utilities: • Power supply: 400 V / 50 Hz • Compressed air: 6 bar (87 psi) Isdpfx Aoyux T Regyoih • Coolant tank capacity: 150 L

Condition: good (used), amount 1 STK Dimensions (HxWxD) 280 x 190 x 190 mm Iodpszuumxjfx Agyoih diameter 60 mm HSS hob for high wear resistance

Condition: new, Year of construction: 2026, functionality: fully functional, grinding wheel diameter: 200 mm, grinding spindle motor power: 4,000 W, Saw blade grinding machine "Schmidt Tempo ECT 502 Retro" suitable for: - HSS and carbide saw blades up to 520 mm in diameter and 8 mm thick - completely overhauled mechanics and additional drive for automatic chip angle adjustment. - modern, mandatory safety devices - new control system, new software - operable via touchscreen display Iisdpfx Ajz Dhbfegysh - 4 kW grinding wheel drive motor in combination with a frequency inverter for variable cutting speeds of 24-60 m/sec. - definable grinding speed, 3 profiles - automatic chip angle adjustment / swivel angle - Autopos 4 - latest generation - adjustable via machine menu - freely definable special teeth, graphical control - remote maintenance and updates possible - extensive diagnostics and machine data menus - ...and many other features and functions - optionally with coolant system and necessary accessories

Year of construction: 1995, condition: good (used), Offer 22054 Technical data: - Drilling capacity - in steel: 15 mm - Drilling capacity - in aluminum: 18 mm - Drill spindle mount: MK 2 - Drilling depth: 70 mm Iiodpfjkt N Nljx Agysh - Spindle overhang / column: 180 mm - Drill spindle speeds: 80 - 4000 rpm - Drive: 400 V, 0.45 / 0.75 kW - Height-adjustable drilling table: 280 x 240 mm - Distance drill spindle / table: approx. 360 mm - Distance drill spindle / base plate: approx. 410 mm - Space required: approx. W 280 x H 1700 x D 600 mm - Weight: approx. 85 kg - Includes: - Quick-change drill chuck 1 - 13 mm - Machine vise - Assorted used HSS drill bits 5 - 15 mm

Condition: used, maximum load weight: 29,660 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 12/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,420 mm, total width: 2,550 mm, total height: 3,390 mm, Year of construction: 2021, Equipment: ABS, * Saddle height approx. 1270 mm * Foldable underrun protection * Towing hook at the rear * Camaro convertible top, electric drive with remote control * SAF axles, off-road version * Disc brakes, 430 mm diameter * Air suspension * 1st axle as a lift axle (automatic and can also be operated from the truck) * Lift axle with forced lowering and starting assist * Polished aluminum rims * LED lighting * Hydraulic system, low-pressure cylinder, 170 bar * Rear wall with hinged flap * Side wall, 4 mm thick, continuous * Floor, 4/5 mm thick * Dump body color: steel gray * Frame color: nova gray * Support legs, galvanized * Aluminum ladder, 3300 mm with bracket * Broom and shovel including bracket on the front wall * SP 06.2027 * And more * Subject to errors, changes, and prior sale Ijdpfjzvz Thsx Agyjih

Condition: used, maximum load weight: 28,760 kg, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 01/2008, loading space length: 7,670 mm, loading space width: 2,257 mm, loading space height: 1,420 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Steel hopper * Normal operation & paver operation * SAF axles with drum brakes * Wabco trailer EBS * Ladder access on the left Isdpfezah Syjx Agyeih * Storage box on the right * Wheel chocks ----* Tire size: 385/65R22.5 * Technical gross weight: 37,000 kg * Tare weight: 8,240 kg * Overall length: 8,450 mm ----Vehicle number: 11901----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. -----We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport. -----Your VTS Team

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement Iiodpfx Agezdz S Tsyeh - CE marking and relevant EU documentation The device i

Condition: used, maximum load weight: 78,380 kg, overall weight: 97,000 kg, axle configuration: > 3 axles, first registration: 06/2023, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt of the equipment, complete equipment list available upon request. Equipment: Iedpfx Aez Ifk Eegyoih * 2-inch kingpin * 12 t Broshuis SL axles * Extendable width extensions * 4 pairs of lashing points on the central beam, 10,000 daN * 1 pair in the fixed section in front of the telescoping section * 3 pairs behind the telescoping section * 9 pairs of lashing points in the outer frame, 10,000 daN * Holes in the outer frame for attaching lashing straps * Jost 2-speed geared support winch * 4 extendable, illuminated width extension panels * 3 plug-in side panels on the gooseneck (length approx. 2,400 mm) * Rear corner posts, plug-in/removable * 4 sets of shims with holders under the loading platform at the support legs * 1 pair of lashing points in the outer frame of the gooseneck, 10,000 daN * 3 pairs of lashing points in the outer frame of the gooseneck, 5,000 daN * NATO socket - NATO spiral cable - 2 x 7-pole electrical system * 1 x 7-pole EBS - 1 socket at the front and rear for auxiliary steering * 1 storage box on the gooseneck, spanning the entire width, with angled corners (45°) * Opening from above - doors in the corners can be locked (not continuous to the storage box in the middle) * 6 sets of plug-in uprights, approx. 1,200 mm high, incl. holder on the gooseneck * WADER container pockets for 1 x 20 ft and 1 x 40 ft - Brake connections, red/yellow - EBS WABCO * Rear support, telescoping * 2 LED reversing lights at the rear * LED lighting (DK round) * 1 LED rotating beacon * 8 pairs of upright pockets in the outer frame of the loading platform * 3 pairs of upright pockets in the outer frame of the gooseneck * Contour marking, yellow on the sides / red at the rear * Adjustable attachment rails for loading ramps * 3 LED flashing beacons at the rear of the vehicle * RAL 3002 carmine red * 2 ECE plates at the rear

Condition: good (used), Year of construction: 2009, 1 used induction shrinking device Manufacturer: BILZ Model: Thermo Grip ISG 3200-WK Year of manufacture: 04/2009 Serial number: 0461 Tool holder: Ø 54 mm Tools, carbide: Ø 3–50 mm Tools, HSS: Ø 6–50 mm Cooling: Water cooling Coolant tank: 30 liters, integrated Coolant: Emulsion Runout accuracy: < 0.003 mm Clamping system: ThermoGrip Operation: Control panel Dimensions (L × W × H): approx. 700 × 650 × 1,700 mm Weight: approx. 120 kg Connection: 3 × 400 V Frequency: 50–60 Hz Connected power: 11 kW Compressed air: 6–10 bar Cooling: Integrated water cooling Control: Digital control panel CE marking: Present Accessories and scope of delivery Various reducing rings and exchangeable discs Tool holders for different chucks Induction coil with height adjustment Integrated cooling unit Original operating manual from BILZ/KOMET, including EC declaration of conformity Iijdpfx Asz E Hmcjgyoh

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Classic 2S Year of manufacture 2001 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achieveable surface quality: Ra: 0.30 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 – 0.33 mm Water bath machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient setup AGIE HSS-C generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Iisdpfx Agjv Dkvreyeh Our machines are cleaned and overhauled after we receive the order. A test cut is then carried out with the best surface for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: used, empty load weight: 3,142 kg, maximum load weight: 14,858 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2021, suspension: air, tire size: 265/70R19,5, color: other, gearing type: other, front tire size: 265/70R19,5, rear tire size: 265/70R19,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Slider-type roll-off container trailer, pneumatic locking system for containers, -- subject to printing errors, mistakes, and changes, sample images --, more data available at: !, More Details: ! Isdpfez R Nf Uex Agysih

Condition: new, Year of construction: 2026, CORMAK CMS260 Multi-Function Machine The CORMAK CMS260 multi-function machine is an advanced 5-in-1 multifunctional machine combining the functions of a table saw, planer/thicknesser, spindle moulder and drill press. Designed to maximize functionality in a limited workspace, it is an ideal solution for professional woodworking shops, craftsmen and wood processing facilities looking for an efficient, precise and compact machine. Main Advantages of the CORMAK CMS260 5 functions in one machine – table saw, spindle moulder, drill press, planer and thicknesser. Three independent high-power motors – ensure continuous and efficient operation without compromise. Precision cutter block – equipped with three HSS knives, ideal for accurate surface finishing. Aluminium sliding fence – the triangular guide design increases cutting accuracy and repeatability. Saw blade angle adjustment from 0° to 45° – easy adjustment using a handwheel. Compact design – ideal for workshops with limited working space. CE compliance – complete technical and operating documentation (DTR) in Polish. Construction and Technology The CMS260 multi-function machine has been designed as a multifunctional woodworking machine in which the individual working modules operate independently, resulting in greater work efficiency and eliminating the need for additional adjustments. The machine is built on a solid steel base, ensuring stability even during intensive operation. Each function — including the table saw, planer/thicknesser, spindle moulder, etc. — has been optimized for operator safety and ergonomics. Protective guards, folding tables and an efficient dust extraction system all contribute to operator comfort and safety. Precision and Performance Thanks to the use of three separate motors (2.2 kW for the saw and planer, 1.5 kW for the spindle moulder), the machine enables intensive operation without a loss of torque. The spindle moulder offers four spindle speed settings (1,400, 4,000, 6,000 and 9,000 rpm), allowing the operating parameters to be optimally adjusted to the type of material being processed. Standard Equipment 254 mm diameter saw blade Cutter block with three HSS knives Aluminium sliding fence Folding planer tables Folding chip guard, Ø100 mm Optional Equipment Drill chuck (available for PLN 1,490 gross) Technical Specifications Table Saw Maximum saw blade diameter 254 mm Saw blade arbor diameter 30 mm Saw blade speed 4,000 rpm Saw blade tilting angle 0° to 45° Maximum cutting height at 0° to 45° 78 (63) mm Motor power 2.2 kW Power supply 400 V Planer / Thicknesser Cutter block diameter 70 mm Number of knives 3 pcs. Cutter block speed 5,500 rpm Feed rollers 32 mm Maximum planing width 260 mm Maximum planing depth 3 mm Fence tilting angle 0° to 45° Maximum thicknessing width 258 mm Maximum workpiece height in thicknesser mode 225 mm Maximum thicknessing depth 4 mm Feed speed 7 m/min Motor power 2.2 kW Main table size 920 × 410 mm Sliding table 238 × 1320 mm Dust extraction pipe diameter 100 mm Spindle Moulder Ijdpfov R Td Ejx Agysih Spindle diameter 30 mm Spindle speed 1,400 / 4,000 / 6,000 / 9,000 rpm Spindle clamping length 105 mm Maximum spindle travel 110 mm Maximum table opening 160 mm Motor power 1.5 kW

Condition: excellent (used), HSS saws chamfering machine EYAN Ijdpjhzcd Ujfx Agysih

Condition: used, empty load weight: 4,120 kg, maximum load weight: 13,880 kg, overall weight: 18,000 kg, first registration: 09/2005, loading space length: 6,300 mm, loading space height: 800 mm, suspension: air, color: white, fuel type: diesel, gearing type: automatic, driver cabin: other, emission class: none, Equipment: ABS, 2-axle Samro flatbed trailer First registered: 9/2005 Air suspension EBS, ABS BPW axles Disc brakes Tires 265/70 R19.5, dual tires Loading area: 6300mm Sideboards: 800mm Adjustable drawbar Unladen weight: 4,120 kg Iodpfozl El Hjx Agysih Export/net price: 3,900 Euro All information is subject to change without notice; errors and omissions excepted.

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Iiodpfxswk Dc Ro Agysh Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features