Used Hurco Vmx 30 for sale (156)

Condition: excellent (used), HURCO VMX 24M VERTICAL MACHINING CENTRE FULLY INTERGRATED 4TH / 5 TH AXIS SIMULTANEOUS MILLING TABLE SIZE 760 X 510 MM YEAR 2010 WINMAX CONTROL 24 ATC THE 5TH AXIS UNIT CAN BE REMOVED FROM THE MACHINE IF NOT REQUIRED Cedpfxowaay De Addsrk EVERYTHING RUNNING AND WORKING AS IT SHOULD

Condition: used, Year of construction: 2014, 2014 built Hurco VM30i with single MAX screen Hurco Control. Note: Photographed on Site...more pictures to follow when the machines arrive in Bristol. Fitted with Max control, 10,000 RPM BT40 spindle. In super condition given their age! . Codpfxswzlupe Adderk Specification: X Axis stroke mm 1.270 Y Axis travel mm 510 Z Axis stroke mm 510 Spindle nose to table surface mm 100-610 T slot (WxDxN) mm 5x18 Working table area (LxW) mm 1.320x510 Spindle Speed rpm 10.000 Main motor kw 15 Motor torque Nm 102 X/Y/Z Axis cutting feedrate mm/min 24/ 24/ 24 Pull stud SK40 Tool storage capacity pc 20 Max. Tool Diameter mm 89 Max. Tool Length mm 250 Max. Tool Weight Kg 7 Machine weight Kg 4.245 Floor space (LxWxH) mm 4.083x2.743x2.576 Standard configuration Control: WinMax Spindle 10.000 RPM Swing arm type 20 tool ATC Pocket and island milling Rigid tap and tapping Remote Jogbox

Condition: not inspected (used), Year of construction: 1999, feed length X-axis: 760 mm, feed length Y-axis: 430 mm, feed length Z-axis: 500 mm, Ultimax 3 with 4th axis BT 40 spindle 8000 rpm spindle speed 760x430x500mm stroke 24-tool changer 860x508mm table Crjdpfx Adovgbrvodjk

Condition: excellent (used), Year of construction: 2016, operating hours: 23,163 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 2 m/min, torque: 118 Nm, controller manufacturer: Hurco, controller model: MAX5, total height: 3,298 mm, total length: 5,662 mm, total width: 3,921 mm, table width: 660 mm, table length: 1,676 mm, table load: 1,360 kg, rotary table diameter: 600 mm, rotational speed (max.): 100 rpm, overall weight: 10,900 kg, spindle speed (max.): 12,000 rpm, distance table center to spindle nose: 622 mm, spindle motor power: 36,500 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 249 mm, tool diameter: 75 mm, tool weight: 7 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 🔹 For Sale: 2016 Hurco VMX60SRTi 5-Axis CNC Machining Centre – Excellent Condition, Full Package 🔹 Crsdjuyt U Tjpfx Addjk Make: Hurco Model: VMX60SRTi Year: 2016 Machine Type: 5-Axis CNC Machining Centre Condition: Excellent Control System: Hurco WinMax with Touchscreen Location: Ireland 📌 Machine Overview: Available now is a Hurco VMX60SRTi 5-Axis CNC Machining Centre in excellent condition, fitted with high-performance features and Hurco’s flexible swivel-head + rotary table configuration. This 2016 model delivers outstanding part accessibility, powerful milling capability, and robust software for advanced 5-axis work. The large table space supports both full 5-axis and standard 3-axis machining, offering maximum operational flexibility for tooling, mold-making, aerospace, and general precision engineering. ✅ Key Features & Included Options: Touchscreen display with shaded 3D graphics (real-time) 2GB RAM | 120GB SSD | USB ports Ultimotion high-speed software (profiling & data smoothing) S-Curve Acceleration & Look-Ahead Finish Control Coolant Through Spindle (CTS) NC4 Laser Tool Probe Renishaw RMP60 Part Probe Software Add-ons: Mould Maker Suite (3D Swept Surface, Helical Entry, Rest Machining) DXF Import, Ultipocket, Adaptipath Ultimonitor + Ultinet (Networking/Remote Diagnostics) Conversational/NC Merge Swivel B Axis & C Axis Rotary Table Conversational or G-code Programming flexibility 🔧 Technical Specifications: Table Size: 1676 x 660 mm Rotary Table Diameter: 600 mm Max Load (Flat Table): 1360 kg Max Load (Rotary Table): 500 kg X Travel: 1524 mm Y Travel: 660 mm Z Travel: 610 mm B Axis Tilt: ±92° C Axis Rotation: 360° Spindle Nose to Table: 13–622 mm Spindle Speed: 12,000 rpm Spindle Taper: BT40 Spindle Power: 36.5 kW Spindle Torque: 118 Nm - 2,900 rpm Tool Changer: 40 Tools Max Tool Diameter: 75 mm Max Tool Length: 249 mm Max Tool Weight: 7 kg Rapid Traverse Rates: X/Y: 32 m/min | Z: 24 m/min Rotary Table Speed: 100 rpm Power Requirement: 70 kVA Machine Dimensions (LxW): 5662 x 3921 mm Height: 3298 mm Machine Weight: 10,900 kg 📈 Ideal For: Aerospace & Defence Components Mould & Die Work Complex 3D Surface Milling Multi-Side Machining in One Setup High-Precision Part Manufacturing Hurco VMX60SRTi for Sale 5 Axis CNC Machining Centre Used Hurco CNC Machine Hurco 5 Axis CNC Ireland CNC Machining Centre with Rotary Table

Condition: ready for operation (used), Year of construction: 2011, operating hours: 42,991 h, General Data Machine weight 4700 kg Main Drive Spindle speed range 12000 rpm Spindle motor power 9 kW Tool taper SK40 Number of axis 5 Movement X-Axis Movement 610 mm X-Axis Rapid Traverse 35 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 30 m/min Table Table load 1000 kg Cedpswg If Uofx Addjrk Additional Equipment 24-fold changer Chipping screw Electrical handwheel Incl. KITAGAWA round table IHK 30 bar This 5-axis Hurco VMX24t was manufactured in 2011. Ideal for complex and precise machining tasks, this vertical machining center offers advanced control technology and robust construction. Consider the opportunity to buy this Hurco VMX24t vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2004, HURCO VMX 64 X-axis travel: 1625 mm Y-axis travel: 865 mm Z-axis travel: 760 mm CNC control: Ultimax 4 table size: 1680 x 890 mm max. table load: 2000 kg spindle taper: SK 40 rapid traverse x/y/z: 18 / 18 / 13 m/min Cedpowyna Sefx Addjrk drive capacity – spindle motor: 15 kW tool magazine: 40 positions max. spindle speed: 10,000 rpm machine fully operational

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HURCO VMX 50 MI YEAR 2014 VERSION 9 SOFTWARE UPOC/HEL, NC MERGE, T&M LIB, UMON, AVG, ISNC/NCPP, RTAP,TCOPTI, SFQ, UMOT,DXF,3D/Swept surface YEAR 2014 XYZ TRAVELS - 1270 X 660 X 610 TABLE SIZE 1500 X 660 MM 24 ATC Cedpfxoxbglge Addsrk 40 TAPER SPINDLE - CAT 40 10,000 RPM STANDARD COOLANT SOME TOOLING WILL GO WITH THE MACHINE WEIGHT 9 TONS

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 2,135 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, controller manufacturer: Hurco, controller model: Winmax, table width: 865 mm, table length: 2,185 mm, overall weight: 17,500 kg, spindle speed (max.): 12,000 rpm, coolant supply: 40 bar, HURCO VMX 84 T40 Vertical Machining Center Year of manufacture: 2010 Control: WinMax (Version 08.01.09.23 ST) Technical specifications: Drive power: 18 kW Speed: 10 - 12,000 rpm Tool holder: SK 40 Number of magazine positions: 40 Internal coolant supply: 20 bar Cjdjv Sm Hvjpfx Addjrk Travel paths: X-axis: 2,135 mm Y-axis: 865 mm Z-axis: 762 mm Accessories: -Chip conveyor -External coolant system with 600-liter tank capacity -Spindle cooler

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Credpfx Asw Tdiusddjk Weight: approx. 4,800 kg Good condition

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Cedpfx Adjwzy N Iederk Tool magazine for 24 tools, SK 40 DCF software

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Credpjw Nklhjfx Addek Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Price: On request CNC Digital type: UNIMAX Number of axes: 3 Crjdpfswnhrwjx Addek Travel x: 1020mm Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - Table length [mm]: 1220 - Table width [mm]: 510 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 8000 - Options: Digital readout - └ Type of digital readout: UNIMAX Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm y-travel: 355 mm z-travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: Cjdpfsrxfxhsx Addork 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 2200 mm Measurements depth 2100 mm Measurements height 2600 mm Machine weight 3400 kg Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Crodpfexu Rxwjx Addjk Movement X-Axis Movement 660 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 406 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 508 mm Z-Axis Rapid Traverse 36 m/min Table Tslots size 14 mm Number of tslots 3 Table load 500 kg Tools Number of index 20 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VM10i was manufactured in 2016. It features a robust table size of 760 × 406 mm, capable of handling a maximum load of 500 kg. The spindle can reach speeds up to 10,000 rpm, supported by a 7.5 kW motor. It includes an automatic tool changer with a capacity of 20 tools. Ideal for precision machining with rapid traverse rates of 36 m/min. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2004, Hurco VM2 Very good condition! Table size: 1170 x 508 mm - Maximum table load: 544 kg Cjdpfx Aevxlvvsddork - Movement in X/Y/Z: 1020 x 457 x 457 mm - Main spindle speed: 8000 rpm - Main spindle taper: SK40 - Main drive power: 15 kW - Weight: approx. 4100 kg - Dimensions: 2500 x 2200 x 2590 mm

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 600 mm, Vertical machining center Manufacturer: HURCO Bebmmvyoubcvtjhwslf Type: BMC 40 / 50 Travel: X-axis 1020 mm Y-axis 762 mm Z-axis 600 mm Table load: 1500 kg Table size 1465 x 870 mm Spindle speeds 30 - 4000 RPM 30-station tool changer Tool-to-tool speed 8 sec. 2000 RPM Spindle mount SK 40 Voltage 400 Csdpowag Tqsfx Addjrk Drive power 11.2 kW Weight 8000 kg Dimensions L x W x H = 3860 x 3315 x 2775 mm

Condition: good (used), Year of construction: 2015, Table size 3000 x 1700mm, Traverses X Y Z 3200 x 2100 x 920mm, Table load 11,000kgs, spindle nose to table 164 – 1084 mm, spindle bored Din 50, spindle speed 6000 rpm, 40 station ATC, Crodpfswu Dlajx Addek Hurco Winmax 5 control. swarf conveyor

Condition: good (used), Year of construction: 2014, operating hours: 9,554 h, functionality: fully functional, machine/vehicle number: SL8-1620455DJAAH, turning diameter over cross slide: 300 mm, turning diameter: 256 mm, spindle speed (max.): 4,800 rpm, travel distance X-axis: 198 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 6,000 mm, total width: 2,200 mm, feed rate X-axis: 19 m/min, feed rate Z-axis: 24 m/min, overall weight: 5,500 kg, bar passage: 50 mm, bar diameter (max.): 32 mm, controller manufacturer: HURCO, controller model: MAX, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, operating hours of spindle: 2,027 h, HURCO TMM8i CNC Lathe Crodpsxw Sr Defx Addsk - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 40 A - Connection: 28 kW - Max. swing diameter: 525 mm - Max. diameter over cross slide: 300 mm - Chuck diameter: 200 mm - Acceleration: 0 - 3000 rpm - Turret type: VDI 30 - With a total of 12 stations - Max. spindle speed: 5000 rpm - Indexing time: 0.23 sec - Max. boring bar diameter: 32 mm - Tool shank cross-section: 19 mm - Including powered tool stations The machine is equipped with a bar feeder from BREUNING, type: ILS MUK 7012-III, year of manufacture: 2017. Also included are a chip conveyor, tailstock, and a three-jaw chuck with a diameter of 200 mm. Attention: The item must be collected firmly and bindingly between 19.01.2026 and 23.01.2026 on a date to be agreed. FCA D-76571 Gaggenau – loaded on truck.

Condition: as good as new (ex-display), Year of construction: 2023, Control : Sonstige Hurco Max 5 Spindle Speed : 12,000 U/min Power : 11 kW Holder : SK 40 Torque : 61 Nm In general Travel X : 660 mm Travel Y : 406 mm Travel Z : 508 mm Rapid traverse X/Y/Z: 28 m/min Crodpfx Adjlf E Aiedek Table : 762 x 406 mm Table load : 1,500 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2311151630, turning diameter over cross slide: 650 mm, spindle bore: 153 mm, turning length: 3,150 mm, turning diameter: 650 mm, turning diameter over bed slide: 650 mm, turning diameter over top slide: 410 mm, quill stroke: 150 mm, quill diameter: 100 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 30 rpm, spindle speed (max.): 1,600 rpm, center height over cross slide: 410 mm, feed length X-axis: 330 mm, feed length Z-axis: 3,150 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 6,261 mm, total width: 3,588 mm, total height: 2,375 mm, type of input current: three-phase, spindle motor power: 18,000 W, overall weight: 5,200 kg, rotational speed (min.): 30 rpm, rotational speed (max.): 1,600 rpm, torque: 1,050 Nm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 230 V, drill spindle diameter: 153 mm, nominal power (apparent): 21 kVA, number of spindles: 1, spindle nose: A2-11, tailstock quill diameter: 100 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine: EUR 149,500.00!!!!! The machine is new and immediately available. Subject to prior sale. Including hinged belt chip conveyor. Delivery of the machine in export packaging ex our warehouse. (Shipping costs to be borne by the buyer) Operating fluids to be supplied by the buyer. Commissioning and training by Milltronics possible. Leasing available (subject to credit approval) Machine details: • CNC control Milltronics 9000-DGI • 15" LCD color touchscreen • Ethernet interface • USB interface • Productivity software, DSA, MSV, bidirectional turning cycle, 9000-DGI Desktop • Connection for external keyboard • Electronic handwheels for manual operation, teaching, or automated processes • Custom macros available • Override potentiometer for axes and spindle • Spindle load monitoring • Key switch to lock the EDIT function • Indicator lights for operating status • Additional "M" function with CNC dwell channel • Constant cutting speed • Rigid tapping • Spindle speed 30 - 1600 rpm • Spindle motor 18 / 11 kW, 2-speed electronic gearbox • Spindle nose type A1-11 • Tool turret with 8 stations, 25 mm • One axial tool holder for standard tools 25 mm x 25 mm • One boring bar holder 38 mm • Automatic lubrication system • Full enclosure with sliding doors • Coolant system with pump • CE certification • Instruction manual, spare parts list, and wiring diagrams in digital format • Operation and maintenance manuals in digital format Cedpox Akm Rjfx Addjrk • Transformer for standard industrial power, 400 volts, 3-phase • Lifting brackets for craning the machine Optional accessories: Manual 3-jaw chuck 300 mm Hydraulic tailstock quill (only in conjunction with hydraulic chuck) Hydraulic 3-jaw chuck with hydraulic power unit (diameter 300 mm – bore 70 mm) Fixed steady rest with rollers, range 20 – 200 mm Fixed steady rest with rollers, range 180 – 410 mm Follow steady rest with brass supports, range 20 mm – 200 mm 38 mm boring bar holder for turret 25 mm axial tool holder Hinged belt chip conveyor instead of drawers Programming manual in paper format Machine manual in paper format Floor mat with Milltronics logo

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle speed range 8000 rpm Spindle motor power 18 kW Number of axis 3 Movement X-Axis Movement 760 mm Credpsxu Rv Nsfx Addek Y-Axis Movement 660 mm Z-Axis Movement 610 mm Table Table load 2x1350 kg This 3-axis Hurco VTXZ vertical machining center was manufactured in 2008. It offers robust construction and precision engineering, ideal for a variety of machining tasks. If you are looking to get high-quality milling capabilities, consider the Hurco VTXZ machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h Crjdpfx Asxtfz Doddjk In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 22 kVA, torque: 102 Nm, controller manufacturer: Milltronics, controller model: CNC 9000, total height: 2,565 mm, total length: 3,722 mm, total width: 3,210 mm, table width: 508 mm, table length: 1,168 mm, table load: 1,710 kg, overall weight: 4,125 kg, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 610 mm, spindle motor power: 15,000 W, spindle nose: Big Plus ISO 40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 240 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 230 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, => Price of the machine within Germany. => Machine available from stock. Transport from the warehouse in the Netherlands or Czech Republic by the buyer. Other machine sizes available including screw chip conveyor and all software options such as • Milltronics 9000-DGI CNC incl. all options for desktop, programming, milling strategies • 15" color LCD touch screen monitor • 120 GB solid state hard drive • 4 GB RAM memory • Two USB ports • Productivity software ChipBoss, DSA, MSV, 9000-DGI Desktop optional accessories: IKZ cooling through the spindle 20 bar, with rotary union and additional tank with filter Programmable air cooling through the spindle IKZ preparation for Milltronics IKZ system allows easy on-site installation of the Milltronics IKZ system IKZ preparation for ChipBlaster® IKZ system allows easy on-site installation of the ChipBlaster® IKZ system Programmable minimum quantity lubrication Programmable air cooling LCM 4th axis model TDE-MV-200 complete with controller and motors Codex Akgwepfx Adderk LCM 4th Axis Model TDE-MV-250 complete with controller and motors 5AX LCM-BSC-200 complete with controller, motors and cables 4th Axis Electrical Package with 1kW servo controller Milltronics M-170 (170mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-200 (200mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics M-250 (250mm) rotary table with servo motor and cable (Requires 4th Axis Electrical Package) Milltronics TS-A135 Tailstock For M-170 rotary table Milltronics TS-A160 Tailstock For M-200 rotary table Milltronics TS-B185 Tailstock For M-250 rotary table 180 mm three-jaw chuck with adapter flange (For Milltronics rotary tables only M-170 and M-200) 230 mm three-jaw chuck with adapter flange (only for Milltronics rotary tables M-250) Tsudakoma 4th axis model RNE-160R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-160R Tsudakoma 4th axis model RNE-200R with motor (4th axis electrical package must be ordered separately) Tailstock for Tsudakoma RNE-200R Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros OTS tool measuring probe with optical signal transmission and macros Renishaw OMI-2T interface included OMP40-2 workpiece probe with optical signal transmission and macros Renishaw OMI-2T included OTS tool measuring probe with optical signal transmission and macros Renishaw NC4-F300 contactless tool measurement DIN / CAT tool holders Hinged belt chip conveyor External keyboard uses 1 USB port Electronic spindle cooler Additional work light Additional "M" functions block of 4 Programming manual in paper format Machine manual in paper format

Condition: ready for operation (used), Year of construction: 2016, operating hours: 27,000 h, General Data Measurements width 6360 Measurements depth 9960 Measurements height 4724 Machine weight 35000 Control Unit Brand HURCO Model WinMax 5 Main Drive Spindle speed range 18000 Spindle motor power 35 kW Main motor power 187 KVA Movement X-Axis Movement 3200 mm X-Axis Rapid Traverse 15 m/min Y-Axis Movement 2100 mm Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 920 mm Z-Axis Rapid Traverse 10 m/min Table Outer length 3000 mm Outer width 1700 mm Min distance between vertical spindle and table 164 mm Max distance between vertical spindle and table 1084 mm Table load 11000 Cjdpfx Adexirfusdjrk Tools Slots in storage 40 Max weight 15 kg Max tool diameter 125 mm Max tool length 300 mm Additional Equipment Oversized linear guides and ultra-rigid roller linear guides Ball screws with double nut and automatic centralized lubrication system Screw chip conveyor and chip conveyor with scrapers Machine interior washing system with emulsion gun/compressed air Ring with emulsion nozzles in the shaft head Large side doors for access LED-illuminated workspace Heat exchanger in the electrical cabinet Premium remote control equipped with LCD display IKZ-20 Spindle cooling CTS20 (20 bar) This 3-axis Hurco DCX32-5Si vertical machining centre was manufactured in 2016. It features a large work surface of 3,000x1,700 mm, supports a maximum table load of 11,000 kg, and offers extensive travel distances with X at 3,200 mm, Y at 2,100 mm, and Z at 920 mm. Equipped with a high-speed main spindle capable of 18,000 rpm and a robust 40-position tool magazine, this machine is ideal for complex, large-scale machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter over cross slide: 475 mm, spindle bore: 65 mm, turning length: 1,600 mm, turning diameter: 300 mm, turning diameter over bed slide: 240 mm, quill stroke: 150 mm, quill diameter: 80 mm, rapid traverse X-axis: 13 m/min, rapid traverse Z-axis: 13 m/min, spindle speed (min.): 100 rpm, spindle speed (max.): 2,600 rpm, center height over cross slide: 240 mm, feed rate X-axis: 2 m/min, feed rate Z-axis: 13 m/min, total length: 4,703 mm, total width: 3,137 mm, total height: 2,388 mm, type of input current: three-phase, spindle motor power: 11,000 W, overall weight: 3,850 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 2,600 rpm, torque: 305 Nm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,600 mm, Turning diameter in gap: 710 mm, controller manufacturer: Milltronics, controller model: 9000 DGI, input voltage: 400 V, drill spindle diameter: 65 mm, nominal power (apparent): 24 kVA, number of spindles: 1, spindle nose: D1-6, tailstock quill diameter: 80 mm, tailstock quill mount: MK 5, tailstock quill stroke: 150 mm, number of slots in tool magazine: 8, Equipment: rotational speed infinitely variable, LIST PRICE of the machine incl. delivery and installation: €123,500.00!!!!! The machine is NEW and immediately available. Unloading and on-site positioning of the machine to be carried out by the buyer. Machine details: - CNC control Milltronics 9000-DGI - 15" LCD color touchscreen - Ethernet interface - USB interface - Productivity software: DSA, MSV, Bidirectional turning cycle, 9000-DGI Desktop - Connection for external keyboard Csdpfoxwy A Dox Adderk - Electronic handwheels for manual operation, teaching, or automatic mode - Custom macros available - Override potentiometer for axes and spindle - Spindle load monitoring - Key switch to lock EDIT function - Indicator lights for operating status - Additional "M" function with CNC wait channel - Constant surface speed - Rigid tapping - Spindle speed 100–2600 rpm - Spindle motor 11 kW - Spindle nose type D1-6 - 8-position tool turret, 25 mm - 1 axial tool holder for standard tools 25 x 25 mm - 1 tool holder for boring bars 32 mm - Automatic lubrication system - Full enclosure with sliding doors - Coolant system with pump - CE certification - Instruction manual, spare parts list, and wiring diagrams in digital format - Operating and maintenance manuals in digital format - Transformer for standard industrial power supply, 400 V, 3 phase - Lifting brackets for crane handling Optional accessories: - Manual 3-jaw chuck 300 mm - Hydraulic tailstock quill (only with hydraulic chuck) - Hydraulic 3-jaw chuck with hydraulic unit (diameter 300 mm, bore 70 mm) - Fixed steady rest with rollers, range 20–200 mm - Fixed steady rest with rollers, range 180–410 mm - Travelling steady rest with brass pads, range 20–200 mm - 38 mm boring bar holder for turret - 25 mm axial tool holder - Hinged belt chip conveyor instead of drawers - Programming manual (hard copy) - Machine manual (hard copy) - Floor mat with Milltronics logo