Used Hurco Vmx 64 for sale (141)

Condition: excellent (used), Year of construction: 2014, Hurco VMX42i vertical machining center Year: 2014 WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travels X-axis 1067 mm Y-axis 610 mm Z-axis 610 mm Tool holder SK 40 Spindle speed max 12000 rpm Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter Accessories/options: Hjdpfx Ajyuc Nveirsnk - Through spindle coolant - Tool holders - Documentations - Remote control - Swarf conveyor Under power in our warehouse!

Condition: used, Year of construction: 2016, x-travel 610 mm y-travel 510 mm z-travel 610 mm Control MAX5 distance spindle /table 150 - 760 mm Hnodpfx Aisyxhiqerek table surface area 760 x 510 mm T-slots (number x width x distance) 5 x 18 H8 x 100 mm table load 1.360 kg number of spindle speeds 12.000 spindle drive 9 kW torque 95 Nm tool taper SK-A 40 number of tool places 30 Pos. tool diameter 80 mm Tool diameter with free secondary positions 130 mm tool length - max. 300 mm weight of tools 7 kg auto power on hours ca. 17.626 h spindle hours ca. 900 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The main spindle was replaced a year ago. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Hnodpfjk Iugzsx Airjk

Condition: used, Year of construction: 2001, HURCO VMX 50 MACHINING CENTER MACHINE IS STILL UNDER POWER YEAR OF MANUFACTURE : 2001 ONLY 6.000 HOURS (approx. ) MEASURING PROBE FOR WORKPIECE POSITION DETECTION FROM TOOLMAKING: PROCEDURES : X : 1270 mm Y : 600 mm Z : 610 mm Size of the table: 1500 mm x 660 mm MAX. LOAD ON THE TABLE : 1300 KG. POWER : 15 KW SPINDLE SPEED : 10.000 RPM TOOL MAGAZINE : 24 STATIONS SPINDLE TAPER : SK40 WEIGHT : KG. 9.000Kg Only the machine no accessories Hodpfx Aisy A Iqpjrjnk

Condition: ready for operation (used), Year of construction: 2016, operating hours: 10,311 h, Main Drive Spindle speed range 10 to 12000 Spindle motor power 13 kW Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 510 mm Hedjx D I Tqepfx Airenk Z-Axis Movement 610 mm Table Table load 1000 kg Tools Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Media Chip conveyor Yes Additional Equipment Cooling Water System Main Cooling Chip Protection Cabin/Cover Machine Lamp Machine Base Machine Status Indicator Lamp This Hurco VMX 30i was manufactured in 2016. It features a robust table size of 1020x510 mm with a maximum load capacity of 1000 kg. Equipped with a high-speed range up to 12000 rpm and a rapid traverse rate of 35/35/30 m/min in X/Y/Z, it ensures efficient machining. Additional features include a cooling water system, chip conveyor, and protective cabin. Consider the opportunity to buy this Hurco VMX 30i vertical machining centre. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2003, x-Weg 1270 mm y-Weg 660 mm z-Weg 610 mm Steuerung Ultimax 4 Tischbelastung 1300 kg Hsdpfx Aeiv R Hleirenk Drehzahl 10.000 U/min Werkzeugwechseleinrichtung 24-fach Werkzeugaufnahme SK 40 Antrieb 15 kW Tischgröße 1500x660 mm Gesamtleistungsbedarf kW Maschinengewicht ca. 9 t Raumbedarf ca. 4,8x4,5x2,95 m

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Tool holder SK 40 Internal coolant 35 kVA Hedpfx Aiowtdzrersnk approx. 7550 kg Comprehensive tool package available separately

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Hjdpfjx Iikbsx Airsnk Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table width: 660 mm, table length: 1,670 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This HURCO VMX 60 Vertical Machining center was manufactured in the year 2008. It is equipped with a MAX control unit and has 3 axis. The machine has a spindle speed of 10000 rpm. Machine Benefits Qualitative Machine Benefits Hnedpsyi Ekxsfx Airek • Good condition Technical Machine Benefits • Tool turret 24 positions • Equipment various tools • Accessories chip evacuator

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine. • Table size: 1,670 x 660 mm • Tool turret: 24 positions Additional equipment • Various tools • Chip evacuator Hnodpfsygmtvsx Airsk Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 1,17,713 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, total height: 2,770 mm, table width: 3,750 mm, overall weight: 6,650 kg, product length (max.): 4,535 mm, This 3-axis Hurco VMX 42 was manufactured in 2007. It features an X-axis travel of 1,060 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 1,270 × 610 mm and a maximum table load of 1,100 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42 vertical machining centre we have for sale. Contact us for further details. • Spindle Nose to Table: 150 – 760 mm • Feed Rate Programmable: 3 – 7600 mm/min • Feed Rate via Console: 3 – 11400 mm/min • Rapid Traverse X/Y/Z: 35 / 35 / 30 m/min • Guideways: Linear guideways (X, Y, Z) • Positioning Accuracy: ±0.01 mm • Repeatability: ±0.005 mm • Table Size: 1270 × 610 mm • T-slots: 5 (DIN 650) T-slot • Width: 18 mm • Distance Between T-slots: 100 mm • Maximum Table Load: 1100 kg • Automatic Tool Changer Type: Drum magazine • Number of Tool Positions: 24 • Maximum Tool Diameter: 80 mm • Maximum Tool Weight: 7 kg • Maximum Tool Length: 300 mm • Tool Holder: SK 40 (DIN 69871) • Pull Stud: ISO 7388/II Type B • Coolant Tank Capacity: 340 liters • Machine-Specific Data • Spindle Drive Power (Continuous): 18.0 kW • Maximum Torque: 720 Nm • Torque at 1 min ED: 237 Nm • Spindle Speed Range: 10 – 12000 rpm • Mount Position (Assembly) Hjdpjynil Refx Aironk • Measuring System: Photoelectric • Standard: Rotary motor encoder • Central Lubrication System: 1 pump (X, Y, Z) • Electrical Connection: 38 kVA / 55 A • Voltage: 400 V • Compressed Air Connection: 6 bar / 0.3 m³/min

Condition: ready for operation (used), Year of construction: 2004, operating hours: 73,420 h, controller manufacturer: HURCO, controller model: Ultimax, This 3-axis Hurco VMX 24 was manufactured in 2004, featuring a robust CNC control system, HURCO Ultimax. It offers a table size of 760 × 510 mm with a load capacity up to 850 kg. The spindle can reach speeds up to 15,000 rpm, and the machine includes a 24-position automatic tool changer. Ideal for detailed milling operations. Contact us for more information about this machine. Hsdpsyb Da Aefx Aironk

Condition: ready for operation (used), Year of construction: 2006, operating hours: 63,442 h, controller manufacturer: HURCO, controller model: UltiMax, number of axes: 3, This 3-axis Hurco VMX 42 was manufactured in 2006. It features a tool tray with 24 positions, a chip conveyor, and a coolant tank with pump. Operating hours total 22,612.4, with spindle hours at 6,344.2. Consider the opportunity to buy this Hurco VMX 42 vertical machining centre. Contact us for more information. • Tool tray with 24 tool positions • Operating hours: 22,612.4 h Hodoyb Ryijpfx Airjnk • Spindle hours: 6,344.2 h Additional equipment • Chip conveyor • Coolant tank with pump

Condition: ready for operation (used), Year of construction: 2014, total height: 3,240 mm, overall weight: 8,880 kg, This 3-axis Hurco VMX 50i was manufactured in 2014, featuring a robust table size of 59 x 26 inches and a maximum spindle speed of 12,000 rpm. It supports a tool capacity of 40 with a rapid tool-to-tool ATC time of 2 seconds. Ideal for precise, heavy-duty machining with a maximum table load of 4,410 lb. If you are looking to get high-quality milling capabilities consider the Hurco VMX 50i machine we have for sale. Contact us for more information. • Table Size: 1500 x 660 mm • T-Slots: 6 x 18 mm Hnodpfx Aijx D E Eqersk • Maximum Weight on Table: 2000 kg • Spindle Nose to Table: 101 mm • Maximum Spindle Speed: 12000 rpm • Spindle Power (15 min/Continuous): 15 kW / 11 kW @ 720 rpm • Spindle Torque (15 min/Continuous): 198.9 Nm / 116.7 Nm @ 720 rpm • Tool Type: CAT 40 / Big Plus® • Tool Capacity: 40 • Maximum Tool Diameter: 76 mm • Maximum Tool Length: 300 mm • Maximum Tool Weight: 7 kg • Tool-to-Tool ATC Time: 2 sec Dimensions Machine Depth 5055 mm

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Hnodpfeyncfwex Airsk Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: good (used), Year of construction: 2006, Winmax control Travel X/Y/Z: 1270 x 660 x 610 mm Hnjdpfsynb T Hjx Airok Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Hjdjx D A Ddjpfx Airenk Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table length: 760 mm, table width: 510 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Hedev Tcfkepfx Airsnk Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: H-H20140, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 24, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm Hsdpfxjylk Eyo Airsnk Table size: 760 mm x 510 mm System: SK40 Speed: 15,000 rpm MACHINE DETAILS Machine weight: 4,700 kg Control: Ultimax EQUIPMENT 24-position tool changer Internal coolant supply (IKZ) Chip conveyor Electronic handwheel

Condition: used, Year of construction: 2003, MACHINING CENTER HURCO VMX 42 Hnodpoyup Urefx Airok YEAR: 2003 CNC: HURCO UltiMAX 4 Table: 1,270 x 610 mm Travels: X axis: 1,070 mm Y axis: 610 mm Z axis: 610 mm Spindle: ISO 40 DIN 69871 Speed: 10,000 rpm Power: 18 kW Tool magazine: 24 stations Complete with chip conveyor Assorted tool holders included

Condition: used, Year of construction: 2002, Technical details: x-travel: 1060 mm y-travel: 610 mm z-travel: 610 mm control: Ultimax 4 spindle speed:: 10 - 10.000 U/min tool taper: SK40 tool changer with: Trommelmagazin mit 24 Plätze places feed speed: XYZ: 3 - 7.000 mm/min rapid traverse:: XY: 30 m/min rapid traverse: Z: 20 m/min table-size: 1220 x 510 mm table load: 1,1 t air-pressure connection: für 6 bar bar Total power requirement: 30 kVA Weight approx.: 6,28 (ohne Anbauteile) t dimension machine xH: 2,82 x 3,2 x 2,7 m dimension swarf conveyor LxWxH: 3,0 x 0,65 x 1,5 The machine is currently in the technical department. delimited working area by chip splash guard cabin incl. cooling device with feeding (30bar internal coolant system) (size 1200x500x150mm) capacity for 340Liter Hnodpfxeu Iddnj Airsk spindle with internal coolant system Scraper belt chip conveyor control panel with two screens Attention! Tool gripper arm for tool change is missing on the machine! Is on sale with this limitation! i.D. *

Condition: ready for operation (used), Year of construction: 2004, A vertical CNC 3-axis machining center Hurco is available. Travel X/Y/Z: 610mm/510mm/610mm, table dimensions X/Y: 760mm/510mm, max. table load: 700kg, spindle interface: SK40, speed: 10000rpm, rapid traverse: 30m/min, feed rate: 15m/min. Machine dimensions X/Y/Z: approx. 3500mm/2000mm/2750mm, weight: approx. 4500kg, operating hours: 68619h. Documentation available. An on-site inspection is possible. Hnsdpeyq R Ekefx Airsk

Condition: excellent (used), Year of construction: 2003, Ultimax 4 control unit Travel X/Y/Z 760 x 510 x 610 mm Table size 1020 x 510 mm Hsdpfxjt Rubbj Airjnk Speed 12,500 min-1 Tool magazine for 24 tools, SK 40

Condition: used, Year of construction: 2007, Manufacturer HURCO Type VMX 50 year of construction 2007 Control ULTIMAX Machine weight approx. 10 t. Tool holder SK40 x-path 1,270 mm y-path 660 mm z-path 610 mm Speed range 10,000 1/min Table size 1,500 x 660 mm Number of tools in the magazine 40 Pl Hodpjtpczxjfx Airsnk

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Hnedsxy Iz Tjpfx Airjk Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco