Used Hydraulic Hacksaw for sale (14,489)

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Guodpfx Aey Rtg Eonxjb

Condition: reconditioned (used), Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. Guedpfx Anoyizxrjxeb The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Gedpjwkaaljfx Anxsub Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, sheet length: 2600sheet thickness: 6upper roll diameter: 190Side Roll: 170prebending: 4motor: 3messurements (LxWxH): 4450 x 1080 x 1160weight approx.: 3350 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: Gedpfod Ab Tnsx Anxsub - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: new, bending length: 4100sheet thickness: 9upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls Guedpfx Asd Ab S Hsnxob - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 10.250,00 We have many references!

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! Godpsy Rf T Rofx Anxeub . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed The cylinders are dry

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. Guodpoy Sbu Hsfx Anxeb The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: like new (used), Year of construction: 1998, Technical Data: Guodpfx Ansy Rxuzsxjb 2 hydraulically adjustable rollers 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Accessories: Various tools Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1984, machine/vehicle number: 65530, table height: 900 mm, back gauge: 750 mm, overall weight: 4,800 kg, total length: 3,510 mm, total width: 1,850 mm, total height: 2,030 mm, Equipment: type plate available, Max. cutting capacity at 45/70 kp/mm²: 6/4 Max. pressure: 200 bar Cutting angle adjustment: 0.5 - 3 degrees Strokes at cutting angle: 13/22 max./min Gedpjy Rh Idofx Anxsub Number of hold-downs: 18 pcs. Main motor: 7.5 kW Cutting length: 3050 mm

Condition: used, functionality: fully functional, Year of construction: 1991, LVD guillotine shear for sale in good condition. The machine can be inspected under power. It has only been used for thin sheet metal processing. Price on request. Gjdpfx Ansy Ry Ehexoub

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. Godpoq Nd Rbofx Anxsub 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: new, Year of construction: 2026, machine/vehicle number: H4-400_1, functionality: fully functional, power: 30 kW (40.79 HP), pressing force: 400 t, stroke length: 300 mm, operating speed: 100 mm/s, reverse speed: 80 mm/s, table width: 4,100 mm, throat depth: 400 mm, clearance between the columns: 3,600 mm, oil tank capacity: 180 l, total length: 6,150 mm, total width: 2,700 mm, total height: 3,400 mm, overall weight: 23 kg, Equipment: CE marking, documentation/manual, safety light barrier, Cone H4-400 Hydraulic Press Brake - DA-66S CoastOne - Finland Technical Specifications Cone H4-400: Bending force: 400 tons Bending length: 4100 mm Cylinder spacing: 3600 mm Stroke: 300 mm Width: 500 mm Throat depth: 400 mm Table height: 985 mm Length: 6150 mm Width: 2700 mm Height: 3400 mm Approach speed: 100 mm/s Return speed: 80 mm/s Bending speed: 10 mm/s Oil tank: 400 l Weight: 22.5 tons Main motor: 30 kW Standard Equipment: - CNC-controlled X, R, Z1, and Z2 axes - 2 backgauge fingers - Delem DA-66S Graphical Control - CNC-controlled crowning device type 1 - AMADA Promecam tool holder Guedpfsy Efczjx Anxob - LazerSafe LZ2 front safety laser + PLC + rear light curtain - Standard punch and 4V die - Integrated LED lighting on the ram as front lighting Delem DA-66S Graphical Control: - 24-inch high-resolution touchscreen - 2D graphical programming interface - 3D machine visualization in simulation and production - Supports 3- to 8-axis control - Includes offline programming software Profile-T Lite – T2D - USB and peripheral interfaces - User-specific application support in the control's multitasking environment - Interface for sensor bending and automatic angle correction

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 30 t, stroke length: 300 mm, table width: 500 mm, table length: 700 mm, clearance between the columns: 400 mm, total width: 2,292 mm, total height: 3,760 mm, Equipment: CE marking, This offer concerns a new machine that is currently still in production. - Control system: SIEMENS S7-1500 - Table specifications: T-slots/holes according to customer requirements - SIEMENS SIMATIC 9-inch LCD touchscreen - Electrical components from Siemens, Allen Bradley, Phoenix, Sick - Machine painting/finishing to customer specifications available Gsdpfxjy Rzchs Anxsub - 1-year warranty on electrical and hydraulic components - 2-year warranty on mechanical equipment and structure

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Godspbvqvepfx Anxjub Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, Year of construction: 2023, Dener XF 30125 - Hydraulic CNC Press Brake - Control unit (swiveling): ESA S640 CNC 15" 2D graphical display / touchscreen - CNC axes: Y1, Y2 and X Godpfxjy A Rc Us Anxeub - Motorized crowning system with CNC control - Hydraulic press brake valve with CE safety signals - MCS PLC safety control - Laser safety system - Backgauge X-axis: 500 mm (manually adjustable) - Upper tool clamping: L = 150 mm (Promecam) - Upper tool: Eurostamp 1260 / standard (835 & 805 mm, divided into 595 & 210 mm) - Lower die holder: standard width (Promecam) - Lower die: Eurostamp 2067 / standard (835 & 805 mm, divided into 100 mm left, 395 mm, 210 mm & 100 mm right) - 2 front supports, manually adjustable in height and lateral position - Power-on hours: 1184 h - Operating hours: 673 h - Year of manufacture: 2023 Technical data: - Press force: 125 t - Bending length: 3020 mm - Distance between uprights: 3050 mm - Number of axes: 3 - Oil capacity: 200 l - Total power requirement: 11 kW - Dimensions (W x H x D): 3660 x 2500 x 1340 mm - Weight: approx. 7000 kg

Condition: used, Year of construction: 1990, pressure 150 t Gsdpfx Aoy Erv Ijnxoub distance between table / ram 660 mm table surface area 1500 x 610 mm diameter of seal 150 mm range L-W-H 1,7 x 1,5 x 2,3 m C-frame press - hole in table Ø 120 mm

Condition: new, functionality: fully functional, Year of construction: 2023, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Gsdpfx Aowuykxenxsub

Condition: used, Punching force: 300 kN Godpfsy Epkgsx Anxeub Dimension(e) e.g. a 20 mm hole in 12 mm steel Stroke triggering via foot switch Support table with stops Assortment of tools is included in the price

Condition: excellent (used), mileage: 4,89,132 km, power: 345 kW (469.07 HP), first registration: 04/2018, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: brown, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 6,640 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2018, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking heater, power assisted steering, soot filter, traction control, trailer coupling, = Additional Options and Equipment = - Alarm system - Aluminum fuel tank - Brake booster - High beam - Speed limiter - Tipper hydraulics - Air conditioning - Leather interior - Leather seats - Air suspension - Air horn - Particulate filter - Radio/CD player - Reverse camera - Sleeper cab - Sideskirts - Sun visor - Stability control - Auxiliary heater - Body-colored bumpers - Preheater - PTO (Power Take-Off) = Notes = VOLVO FH 460 | Hydraulics | 6X2/4 | 489,132 km | 2018 | Smart Tachograph 2 | Full air suspension | Lift/steerable axle | Sliding fifth wheel | VEB+ | Parking air conditioning | Navigation | Refrigerator | Reverse camera | Air conditioning | ACC | Cruise control | Automatic transmission | Euro 6-C | TÜV/MOT/APK valid until 04-2027 | Belgian truck Chassis number: YV2RTY0C3JB859828 More about the truck Video of the truck (YouTube): EXPORT Road transport services: Austrian transit license plates with insurance for 21 days + €550 Sea transport services: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about GEERTS Trucks & Trailers YouTube channel GEERTS Trucks & Trailers: Instagram GEERTS Trucks & Trailers: Facebook GEERTS Trucks & Trailers: TikTok GEERTS Trucks & Trailers: LinkedIn GEERTS Trucks & Trailers: Follow us and subscribe to our channel to see our latest vehicles! No rights can be derived from errors in this advertisement. GEERTS Trucks & Trailers always strives to provide correct information. = More Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Steerable; Axle brand: BRIDGESTONE; Left tire tread: 60%; Right tire tread: 60% Rear axle 1: Tire size: 315/70R22.5; Lift axle; Max. axle load: 7,500 kg; Steerable; Axle brand: BRIDGESTONE; Left tire tread: 75%; Right tire tread: 75% Rear axle 2: Tire size: 315/70R22.5; Dual tires; Differential lock; Max. axle load: 11,500 kg; Axle brand: CONTINENTAL; Inner left tire tread: 95%; Outer left tire tread: 95%; Inner right tire tread: 95%; Outer right tire tread: 95%; Reduction: Single reduction Weights Unladen weight: 9,030 kg Payload: 17,470 kg Gross vehicle weight (GVW): 26,500 kg Interior Upholstery: Leather Maintenance, history, and condition APK (Technical main inspection): Valid until 04.2027 Technical condition: very good Visual condition: very good Further information Contact Olivier Geerts or Edwin Geerts for more information. Guodpfoy R Uvbox Anxjb

Year of construction: 2014, condition: ready for operation (used), A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible. Gujdpfx Ansy N Uwvexjb

Condition: used, Double column press - Hydraulic Manufacturer REPKON Model 2000/800 kN Condition used description Pressure 200 t Column width 1600 mm ram stroke - max. 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% mm/sec Pressing speed 20 mm/s at 100% mm/sec Die cushion pressure 800 kN Die cushion stroke 150 mm Die cushion speed to 68/ from 225 mm/sec Conversion year: 2001 Gjdpfx Aoudb Hcjnxoub

Condition: used, Various pistons / cylinders available. Cevoman bvba. Lenskensdijk 5 Guodey R Nu Espfx Anxeb 2200 Herentals Belgium

Condition: good (used), mileage: 1,71,823 km, power: 338 kW (459.55 HP), first registration: 11/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2023, Equipment: AdBlue, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, retarder, second fuel tank, spoiler, = Additional Options and Equipment = - Rear work lights - Front work lights - Heated mirrors - Windshield - Cabin - Tipping hydraulics - Auxiliary heater - Automatic pre-heating system - PTO (Power Take-Off) = Notes = Scania R460 Highline 4x2 - PTO/Hydraulic - Retarder - Night air conditioning - Twin tanks - Navigation MY: 13-11-2023 KM: 171823 YS2R4X20009332976 Hydraulic system 150-170-250 bar Parking cooler Smart 2 tachograph Fridge Retarder = Further Information = Technical Information Number of cylinders: 6 Transmission: I-shift, 12-speed, automatic Front axle: Tire size: 385/65R22.5; Max. axle load: 7500 kg; Steering; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf suspension Guodpfx Asyx Aw Aonxjb Rear axle: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11500 kg; Left inner tire tread: 40%; Left outer tire tread: 40%; Right inner tire tread: 40%; Right outer tire tread: 40%; Suspension: air suspension Weights Unladen weight: 8,419 kg Payload: 10,581 kg Gross vehicle weight: 19,000 kg Condition Technical condition: good Visual condition: good Further Information Contact VAEX The Truck Traders for more information.

Condition: good (used), mileage: 6,80,015 km, power: 485 kW (659.42 HP), first registration: 06/2009, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro4, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 10,500 kg, permissible axle load (axle 3): 10,500 kg, Year of construction: 2009, Equipment: AdBlue, central locking, = Additional options and equipment = - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Windscreen - Cab - Pre-heating system - PTO (Power Take-Off) = Remarks = Volvo FH16.660 Globetrotter 6x4 - PTO/Hydraulics - Hub reduction - Leather MY: 22-6-2009 KM: 680,015 YV2AUJ0D29A682779 PTO and hydraulics Hub reduction 3.20 m wheelbase Leather interior Etc. = Further information = Technical information Number of cylinders: 6 Engine displacement: 16,000 cc Gross vehicle weight: 30,000 kg Transmission Transmission: I-Shift, 12-speed, automatic Axle configuration Godpfx Ajy Rx Rpsnxoub Front axle: Tyre size: 385/65R22.5; Max. axle load: 9,000 kg; Steering axle; Tyre tread left: 40%; Tyre tread right: 40%; Suspension: leaf springs Rear axle 1: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,500 kg; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Reduction: outboard planetary axles; Suspension: air suspension Rear axle 2: Tyre size: 315/80R22.5; Twin tyres; Max. axle load: 10,500 kg; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Reduction: outboard planetary axles; Suspension: air suspension Functional Body manufacturer: Volvo Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 2,500 t, table width: 2,500 mm, table length: 5,000 mm, total length: 8,000 mm, total width: 8,000 mm, total height: 9,000 mm, overall weight: 55,000 kg, Equipment: safety light barrier, LOIRE SAFE Hydraulic Press – High-Performance System for Toolmaking and Heavy-Duty Forming This high-performance hydraulic press in a robust 4-column gantry design has been specifically engineered for demanding applications in toolmaking (tryout/spotting) as well as for large-format forming processes. The stress-relieved, annealed welded construction ensures maximum rigidity and long-term process stability. The machine is equipped with three main cylinders featuring multi-cylinder parallel control, achieving high repeat accuracy within ±0.1 mm. Its powerful hydraulic system, based on Bosch Rexroth components, operates at a maximum working pressure of approximately 450 bar, enabling precise and forceful processing. Control is provided via a Siemens S7-317F PLC, combined with servo-controlled axes (Rexroth MLC) and visualization via Siemens WinCC. This setup allows for fully programmable press cycles, storage of tool parameters, and user-friendly operation with diagnostics and fault monitoring. In terms of safety, the press is comprehensively equipped: light curtains at the front and rear (Category 4), ram parallelism monitoring, emergency stop with defined response time, and optional two-hand operation ensure maximum operational safety. The system is CE-compliant and meets current safety standards. Features include a hydraulic, three-section draw cushion, a hydraulic ram cushion, as well as a movable table with approximately 4,000 mm stroke. The machine is complemented by a DIN-standard ram plate and integrated cutting impact damping for challenging forming processes. Toolmaking (Tryout / Spotting) Guodpjyw Ah Eefx Anxob