Used Hydraulic Workshop Press for sale (40,850)

Condition: new, pressure 30 t stroke 400 mm daylight longitudinal/sideways 740 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 7,5 mm/sec feed up 12,5 mm/sec Motor output 2,2 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,35 x 0,85 x 2,1 m High-quality, hydraulic press can be used either by hand or by motor operate. Cylinders can be moved sideways. Safety valve at cylinder end position. Djdpfxeitt S Te Adkeku CE marking

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, ITALMACCHINE hydraulic press brake Year of manufacture: 2000 CE CNC control: ESA S 530 Controlled axes: 4 (Y1-Y2-X-R) Bending length: 3050 mm Pressing force: 100 tons No. 4 rear stop reference fingers Tool clamping: Promecam type Safety barriers Dedpfx Ajw T Thtjdkeku Weight: 7200 kg Motor power: 7.5 kW.

Condition: new, Year of construction: 2025, pressing force: 100 t, stroke length: 300 mm, – Capacity 100 tons – Cylinder stroke 300 mm – Working width 1070 mm Dkodpowg Smiofx Adksu – 2 speeds – With V-blocks/pressure plates – Pressure gauge – Emergency stop – Documentation – 400 V

Condition: excellent (used), Technical specifications: Pressing force: 500 tons Distance between uprights: 4,300 mm Dimensions (length x width x height): approx. 5,100 x 900 x 4,300 / 5,600 mm Dksdpoxgblljfx Adkeu For transport (in two parts): Dimensions: 2 x 5,100 x 900 x 3,050 mm Weight: 1x 15,700 kg – 1x 13,200 kg (total 28,900 kg) The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 1992, condition: excellent (used), Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: Djdpfxsh U A Ibo Adkoku - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: STHP 80KN, total height: 1,320 mm, total width: 510 mm, total length: 200 mm, pressing force: 8 t, table width: 300 mm, overall weight: 110 kg, 1 Hydropneumatic press type STHP 80 kN Bmcbfntr with two-hand operation - floor model with and base frame The compact and handy table model has a hydropneumatic drive with pressure intensifier, which can increase the punching force by up to 5 times. The punching cylinder is pressurized with oil by the pressure intensifier during the working stroke and therefore has a purely hydraulic punching stroke. The return stroke is performed directly with compressed air. The adapter that can be screwed into the piston rod of the working cylinder makes it possible to install special tool holders. Dedot Rhb Iopfx Adksku

Condition: new, pressure 60 t stroke 400 mm daylight longitudinal/sideways 820 x 300 mm dayligth 900 mm liter capacity 6,5 l feed down 6,1 mm/sec feed up 10 mm/sec Djdpjgg Nn Sofx Adkoku Motor output 2,2 kW weight of the machine ca. 0,675 t dimensions of the machine ca. 1,46 x 0,85 x 2,1 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking

Condition: good (used), Hydraulic spindle press Djdpswrazfofx Adkeku AGEO 40/650 Pressing force 40T Very good condition and immediately ready for use Price free loaded onto the truck

Condition: used, functionality: fully functional, machine/vehicle number: 71737, total width: 640 mm, total length: 1,575 mm, total height: 1,970 mm, overall weight: 645 kg, input voltage: 3,000 V, pressing force: 40 t, pressing speed: 5 mm/s, The hydraulic two-column assembly and pressing press with a force of 40t OKS 1671M is designed for straightening parts, pressing in and out of sleeves, bushings, bearings, gears, as well as other pressing works during the repair of tractors, cars and agricultural machinery. The press can be used for cutting, bending, drawing and other operations. Maximum force, kN (tf) – 392(40) Maximum working pressure in the hydraulic system, MPa (kgf/cm2) – 20(200) Piston stroke, mm – 250 Piston speed during the working stroke, mm/s – 5 Maximum distance between the table and the piston, mm – 1000 Dsdpjwbz Irsfx Adksku Maximum table travel, mm – 750 Dimensions of clearances between the posts, mm: from front to back – 250 from left to right – 1000 Dimensions of the table support plates, mm – 400х450 Working fluid – industrial oil I20A GOST 20799-75 Pump type – eccentric three-plunger Feed, l/min – 5 Nominal speed, rpm – 1500 Power consumption, kW – 3 Overall dimensions, mm – 1575х640х1970 Weight, kg – 645

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm Dksdovzxphopfx Adksu throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: new, pressure 200 t stroke 400 mm daylight longitudinal/sideways 1300 /450 mm dayligth 900 mm tank capacity 75 l liter capacity 22 l Dkedpfofm T Hgox Adkeu feed down 6,9 mm/sec feed up 12,6 mm/sec Motor output 7,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,0 x 0,75 x 2,8 m Presses can be operated both by hand and by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l Dodpfewvva Sex Adkjku power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: new, pressure 10 t stroke 180 mm daylight between the columns 335 x 115 mm dayligth max. 340 mm 56 mm diameter of piston 40 mm weight of the machine ca. 0,05 t dimensions of the machine ca. 0,75 x 0,53 x 1,6 m Our frame presses are officially CE certified according to the latest rules. Almost all presses offered in this area are not CE certified. - with manual hydraulics - Move the cylinder sideways - Pressure gauge Dksdpfxsupxc Hj Adkju - 2 press documents

Condition: used, Year of construction: 1985, pressure 40 t Dsdovzxrpepfx Adkoku stroke 500 mm throat 360 mm dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, pressure 200 t stroke 400 mm Dkedpovxw Hgofx Adkou daylight longitudinal/sideways 1490 /400 mm dayligth 900 mm liter capacity 22 l Motor output 7,5 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,67 x 1,0 x 2,5 m Presses can be operated both by motor. Cylinders can be moved sideways. Safety valve with cylinder end position. CE marking 2 year guarantee

Condition: used, pressure 25 t stroke 500 mm throat 355 mm dayligth 800 mm table surface area 500 x 500 mm table height over floor 700 mm ram surface 250 x 250 mm power requirement 7,5 kW Dodpsvzxq Sefx Adkjku Weight 2,1 t dimensions of the machine ca. 1,45 x 0,9 x 2,55 mxmxm hole in the table 180 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive as is where is, WITHOUT putting into operation, in given condition

Condition: used, pressure 100 t stroke 400 mm daylight longitudinal/sideways 1010 x 300 mm Motor output 4,0 kW liter capacity 11,0 l dayligth 900 mm Djdpfxevu E Uwj Adksku table surface area 1010 x 560 mm feed down 6,1 mm/sec feed up 10,0 mm/sec weight of the machine ca. 1,0 t dimensions 1460 x 850 x 2400 mm Manual and motor operation. Side-sliding cylinder.

Condition: used, Year of construction: 1978, pressure 100 t Djdpfovzxp Uox Adkoku stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: new, pressure 80 t stroke 400 mm table surface area 920 x 540 mm Motor output 2,2 kW Dedpfx Aevu E T Hodkoku liter capacity 9,0 l dayligth 800 mm tank capacity 31 l daylight between the columns 920 x 300 mm weight of the machine ca. 0,725 t dimensions of the machine ca. 1,45 x 0,85 x 2,45 m Hand and Motor operated. Side-sliding cylinder.

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm Dkodpfx Adjvuuflskou oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m year of manufacture 1979 - overhaul 1993 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation press can be inspected in running condition in our warehouse - can also be offered with new control on request

Condition: used, pressure 75 t stroke 250 mm daylight longitudinal/sideways 800 x 215 mm dayligth 170 - 885 mm Dsdpfjupxr Ujx Adkjku working pressure 7,5 - 8.5 bar weight of the machine ca. 0,45 t dimensions 1,2 x 0,8 x 2,1 mm Hydraulic/pneumatic workshop press Cylinder can be moved sideways pneumatic foot pedal Winch for table height adjustment 2 pcs. pressing blocks CE marking

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm Dkodpfxovuucke Adkou dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, pressure 2 t throat 150 mm stroke 150 mm distance table/ram, max. stroke up, adjustment up mm table surface area 310 x 250 mm Dkjdpetzv Hmefx Adkeu hole in the table mm table height over floor mm power requirement 2,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 1,7 m Single column press - with table base - various press accessories

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm Dkjdpfxjvut Rmo Adksu table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, pressure 8 t throat 150 mm stroke 255 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 400 x 320 mm power requirement 3,0 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,2 x 0,8 x 2,25 m Single-column press Dkjdow In A Uepfx Adkju - Two-handed shutter release - Emergency stop device - Adjustable limit switch