Used Imagesetter Poland for sale (1,321)

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Duedpfszgdafox Acpow Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Dedpfxjzgc U Us Acpjuw Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Equipment: – Control panel with touchscreen PLC Dsdpfjzgc Uujx Acpeuw – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Format: 640x890mm Duodpfozgc Uhsx Acpew The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Djdpfx Acszgc Ubopjuw Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: good (used), Rigo Lamibind 340 HM Perfect Binder Machine in perfect condition, manufactured in 2016, with very low mileage. Ready to use. Hot Melt Binder Machine is very quick to set up – controlled via a touchscreen panel. Disc milling. External waste extraction. Instructions included. Technical specifications: Dusdpozgc Tqjfx Acpjw Capacity up to 290 cycles/h Binding thickness 40 mm Max. format 340 x 450 mm Min. format 80 x 80 mm Cover thickness 300 gsm Weight 300 kg Power supply 230V

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Automatic cover feeding and creasing. Dodpfx Aszgc Tkscpeuw The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Condition: good (used), Logitrans LL1000TE Mobile Paper Stack Lift This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery and charger. Battery-powered. Automatic and manual stack lifting and lowering cycles, fast operation. Load capacity: 1000 kg. Dedszgc Tdopfx Acpsuw Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: excellent (used), Year of construction: 2013, We offer a used KROMA GUTMASTER 1200 mackerel gutting and injecting line from 2013. This industrial processing line is designed for the automatic gutting, cleaning, waste extraction, and brine injection of mackerel in fish processing plants. The machine is suitable for fish weighing 200–500 g and combines several operations in one continuous workflow. The fish is manually placed in special conveyor pockets, head-first and belly-up. As it moves through the line, the machine measures the fish and automatically adjusts the knives to its size. The system opens the belly, separates the gills, removes the entrails using the VACMASTER 200 vacuum system, cleans the inside of the fish, removes kidney blood, and then transfers the product to the brine injection section. The line is equipped with the BRINEMASTER automatic brining module, located directly after the cleaning section. A special injection head with 50 needles, each 2 mm in diameter, injects brine into the fish. After brining, the product is transported by conveyor to an inspection table or directly into containers. The KROMA GUTMASTER 1200 is made of acid-resistant materials and AISI 304 stainless steel, ensuring durability, hygiene, and resistance to demanding production environments. The machine is also equipped with CIP and CWS cleaning systems, helping to reduce cleaning time and improve sanitary working conditions. If there is no fish in a conveyor pocket, the working units are automatically deactivated, which reduces wear and energy consumption. Technical specifications: Manufacturer: KROMA Model: GUTMASTER 1200 Year of manufacture: 2013 Application: mackerel gutting, cleaning, and brine injection Fish size: 200–500 g Capacity without brine injection: up to 50 pcs/min Capacity with brine injection: up to 35 pcs/min Total power: 8 kW Control: microprocessor-based PLC Vacmaster 200: automatic vacuum gut-removal system Brinemaster: 50 needles, 2 mm diameter Outfeed conveyor: yes CWS cleaning system: yes CIP cleaning system: yes Basic spare parts kit: included in the price Operating staff: 2–3 people Weight: approx. 1000 kg Dimensions: 5100 / 6100 mm with conveyor x 600 x 1600 mm Main advantages: Dodpfezkizvsx Acpeuw automatic gutting, cleaning, and brine injection in one line, high capacity of up to 50 fish/min without brining and up to 35 fish/min with brining, suitable for mackerel weighing 200–500 g, VACMASTER 200 vacuum system for entrail removal, BRINEMASTER brine injector with 50 needles, stainless steel and acid-resistant construction, CIP and CWS cleaning systems, PLC control, basic spare parts included in the machine price.

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Djdpfx Acowu Ackopeuw Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Year of construction: 2026, condition: new, functionality: fully functional, # Sheet Metal Beading Machine ETB 40 – Metal Technics Polska ## Professional Sheet Metal Beading Machine The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. ## Key Features * Maximum sheet thickness: 4 mm * Powerful 2.2 kW electric motor * Heavy-duty steel construction * 300 mm throat depth * Precise material guidance * Suitable for a wide variety of beading and flanging operations * Quick and easy roll replacement * Ideal for HVAC, tanks, enclosures, and steel fabrication * High manufacturing quality * Machine available from stock ## Technical Specifications * Model: ETB 40 * Maximum sheet thickness: 4 mm * Roller width: 165 mm * Throat depth: 300 mm * Roller speed: 15.3 rpm * Motor power: 2.2 kW * Dimensions (L × W × H): 1550 × 510 × 1180 mm * Weight: 341 kg ## Applications The ETB 40 is ideal for manufacturing: * HVAC ducts and fittings * Air-conditioning components * Cylinders and tanks * Machine enclosures * Decorative sheet metal components * Flanges, reinforcing beads and stiffening profiles * Components for the automotive and steel fabrication industries ## Heavy-Duty Construction Duodjzkubzopfx Acpjw The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. ## Easy Operation The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. ## Transport & Technical Support We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. ## Why Choose Metal Technics Polska? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, stroke rate (max.): 20 1/min, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 4 mm, table height: 740 mm, input voltage: 400 V, type of input current: three-phase, total length: 3,130 mm, total width: 2,030 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, type plate available, HYDRAULIC GUILLOTINE SHEAR 4×2500 + LASER 4 × 2500 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 4 mm Maximum cutting length: 2500 mm Blade rake angle: 1° 30′ Number of strokes per minute: 20 Back gauge travel: 600 mm (standard) Distance between side frames: 2650 mm Blade length: 2550 mm Table height: 740 mm Motor power: 5.5 kW Weight: 3800 kg Machine dimensions (L × W × H): 3130 × 2030 × 1600 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line (laser guide) Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual (English language) Delivery to the customer is possible. Transport cost is calculated individually by the transport company. Dsdpfx Aeyt E Aijcpouw If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 2013, We offer a used TREIF Twister G dicer an industrial machine designed for cutting food products into cubes, strips, slices and other formats, depending on the cutting set used. The machine is available with a conveyor and additional parts. The TREIF Twister G model is suitable for food processing plants that need repeatable and efficient product cutting. It is designed, among others, for cutting meat, fish and cheese into cubes, slices, strips, flakes or grated products. The TREIF Twister version offers high-performance cutting with a chamber size of 120 × 120 × 550 mm and a capacity from 800 kg to 3500 kg/h, depending on the product and settings. The TREIF Twister G dicer was designed for production environments where flexibility, cutting accuracy and quick product changeover are important. The large working chamber reduces the need for prior product pre-cutting, which can reduce manual work and improve process hygiene. The machine design allows convenient operation, while the use of appropriate cutting tools makes it possible to adapt the cutting format to the requirements of a specific product. The machine can be used for cutting fresh meat, bacon, ham, sausages, fish, cheese, delicatessen products and ingredients for ready meals. Thanks to the conveyor, the product can be efficiently discharged after cutting and transferred to the next stage of the process, such as mixing, packing, weighing or further processing. Duedpfx Acozkacdopsw Technical data: Manufacturer: TREIF Model: Twister G Machine type: dicer / cube cutter Year of manufacture: 2010 Power supply: 380–480 V Current type: 3-PE Frequency: 50/60 Hz Control voltage: 24 V Rated current: 13–11 A Protection: 20 A Power: 6 kW / 8.16 hp Weight: approx. 670 kg Country of manufacture: Germany Equipment: conveyor and part Main advantages: precise cutting of products into cubes, strips and slices suitable for meat, fish, cheese and convenience food products large working chamber 120 × 120 × 550 mm capacity up to 3.5 t/h, depending on product and settings conveyor included additional parts included reduced manual work during raw material preparation repeatable cutting format easier integration with a production line solid industrial construction renowned TREIF / JBT Marel manufacturer machine manufactured in Germany Applications: cutting meat into cubes cutting bacon and fat cutting ham and sausages cutting fish cutting cheese production of ingredients for ready meals production of delicatessen products convenience food production preparation of raw material for mixing preparation of product for packaging lines for portioning and cutting food products

Condition: ready for operation (used), The professional vacuum tumbler MA-3600PSCH from the renowned company Metalbud Nowicki is a device designed for intensive use in the meat industry. This model is ideal for tenderizing, marinating, and curing meat, as well as improving the structure and yield of the final product. The use of vacuum technology allows for deeper penetration of marinades and reduces weight loss. The robust stainless steel construction and intuitive operation make it the ideal solution for medium and large food processing plants. Technical specifications: Manufacturer: Metalbud Nowicki (Poland) Model: MA-3600PSCH Year of manufacture: 2006 Power supply: 3x400V / 50Hz Installed power: 5.3 kW Maximum current consumption: 13 A Device weight: 2000 kg Dimensions (L x W x H): 4 m × 1.75 m × 2.05 m ✅ Advantages of the NOWICKI MA-3600PSCH vacuum tumbler: High efficiency and large drum capacity – ideal for large-scale production Vacuum circulation improves meat quality and structure Acid-resistant construction – durability and easy to maintain hygiene Low energy consumption in relation to performance Simple operation and programmable parameters Dujdpfx Aowxxbqjcpew Complete technical documentation and electrical diagram included Proven quality of the Metalbud Nowicki brand – a leader in the field of machines for the food industry The NOWICKI MA-3600PSCH vacuum tumbler is available immediately – an ideal investment for plants looking for an effective and reliable solution for meat processing.

Condition: used, We offer a used KARL SCHNELL 119 FD 225 D emulsifier – an industrial machine designed for continuous cutting, emulsifying, homogenizing and grinding of food products. The machine is suitable for meat processing plants, fish processing plants, production of fillings, pâtés, sauces, pastes, delicatessen products and convenience food. The KARL SCHNELL 119 FD 225 D belongs to the FD series of inline emulsifiers. Machines of this type are used wherever a very fine, uniform and stable product structure is required. The FD series is designed for high-quality emulsification and can be adapted with suitable cutting tools and drive configurations depending on the processed product. The heart of KARL SCHNELL emulsifiers is the KS cutting system, which enables intensive product size reduction in a continuous process. Depending on the application, this type of machine can operate with different cutting tool configurations, including knife systems with perforated plates. This allows the machine to be adapted to products with different structures, viscosity and technological requirements. The inline cutter operates continuously – the product is fed into the working chamber, passes through the cutting system and is discharged as a finely cut or emulsified mass. This solution helps increase production efficiency, reduce manual work and achieve repeatable product quality in subsequent batches. The machine can be used as a standalone unit or as part of a larger technological line, for example after preliminary grinding, mixing or bowl cutting. The KARL SCHNELL 119 FD 225 D is a good solution for plants looking for an efficient inline emulsifier for industrial food production. Technical data: Manufacturer: KARL SCHNELL Model: 119 FD 225 D Machine type: emulsifier Power: 74 kW / 100 HP Power supply: 400 V Frequency: 50 Hz Motor speed: 2975 rpm Control cabinet operating voltage: 3 × 400 V / 50 Hz Control voltage: 230 V AC Construction: stainless steel Application: cutting, homogenization and emulsification of food product Main advantages: continuous inline operation high power of 74 kW motor speed 2975 rpm intensive cutting and emulsification of product possibility of obtaining a fine and homogeneous mass structure Duodpezi U Rmjfx Acpew suitable for fillings, emulsions, pâtés, sauces and pastes can operate as a standalone machine or as part of a technological line solid industrial construction stainless steel construction renowned manufacturer KARL SCHNELL solution for continuous production in food processing plants

Condition: used, We offer a used Poly-clip ICA 8700 Double-Clipper – an industrial automatic double clipping machine designed for closing casings in the production of meat products, formed hams, slicing products, large-calibre sausages and other food products requiring tight and repeatable clipping. The Poly-clip ICA model was designed for large calibres and formed products. The machine can be used with fibrous, collagen and plastic casings. Thanks to the iris separation system, the unit allows short and symmetrical product ends to be achieved, together with an aesthetic and repeatable closing result. Duedpfx Aezi U Ixecpjw The ICA 8700 Double-Clipper can operate together with vacuum fillers and ham pumps, creating an automated station for filling and closing products. After filling, the machine gathers the casing, separates the product and applies clips, which helps increase process efficiency and reduce manual work. The machine is particularly suitable for the production of formed hams, whole-muscle products, mortadella, large-calibre sausages, matured products, slicing products and products packed in casings requiring strong and tight closure. Poly-clip ICA is a machine designed for plants that need an efficient, hygienic and repeatable clipping system for industrial food production. The stainless steel construction makes cleaning easier, while ergonomic operation supports smooth daily production work. Technical data: Manufacturer: Poly-clip System GmbH & Co. KG Model: ICA 8700 Type: automatic double clipping machine Power: 2.8 kW Power supply: 3 × 400 V Frequency: 50 Hz Calibre range: up to 200 mm Capacity: up to 60 cycles/min in continuous operation Supported casings: fibrous, collagen and plastic casings Application: clipping of large calibres and formed products Main advantages: automatic industrial double clipping machine designed for large calibres and formed products suitable for fibrous, collagen and plastic casings iris separation system for short and symmetrical product ends repeatable and tight casing closure possibility of cooperation with fillers and ham pumps high clipping process efficiency stainless steel construction easier hygienic maintenance reduced manual work renowned manufacturer Poly-clip System solution for the production of formed hams, large-calibre sausages and slicing products

Condition: reconditioned (used), We offer a CARNITECH screw conveyor with feeding hopper – an industrial set designed for conveying, feeding and dosing raw material in food processing plants. The system is suitable for production lines where stable, controlled and efficient product feeding to further processing machines is required. The set consists of a feeding hopper and a screw conveyor, often referred to as an inclined screw feeder. This solution allows the product to be conveniently loaded into the hopper and then smoothly transported to the next stage of the process, for example to a mixer, grinder, bowl cutter, separator, forming machine, packaging machine or other production equipment. The CARNITECH screw conveyor and hopper are equipped with motors of 4 kW and 2.2 kW, ensuring efficient operation even in demanding production conditions. The control system is equipped with frequency inverters from renowned brands Fuji and Danfoss, allowing smooth speed adjustment and adaptation of the machine operation to the type of raw material and the capacity of the entire line. A major advantage of the system is the possibility of smooth speed regulation and reverse operation, meaning the direction of rotation can be changed. This gives the operator better control over the feeding process, helps reduce the risk of blockages and allows the machine to be adjusted to current production needs. The safety system is designed using components from the well-known and respected company Pilz, which increases operator safety during daily operation. The system can be used as a standalone conveying unit or as part of a larger technological line in meat, poultry, fish processing plants and convenience food production. Technical data: Manufacturer: CARNITECH Type: screw conveyor with feeding hopper Set components: screw conveyor / inclined screw feeder + feeding hopper Motor power: 4 kW and 2.2 kW Control: system with frequency inverters Frequency inverters: Fuji and Danfoss Speed regulation: smooth Reverse operation: yes Safety system: Pilz components Application: conveying, feeding and dosing of raw material Main advantages: stable feeding of raw material to the production line set consisting of a feeding hopper and screw conveyor 4 kW and 2.2 kW motors smooth speed adjustment possibility of reverse operation frequency inverters from Fuji and Danfoss safety system based on Pilz components efficient operation in demanding production conditions Dedpfx Aezi U H Uscpsuw possibility of integration with other food processing machines solid industrial construction solution for automation of raw material transport

Condition: excellent (used), Year of construction: 2008, We offer a used NOCK CB 501 skinning machine – an industrial machine designed for automatic skinning and removal of skin from meat products. The machine is suitable for meat processing plants, butcheries, cutting plants, ham production, bacon processing, pork processing and other applications requiring precise separation of skin from the raw material. The NOCK CB 501 model belongs to the group of industrial belt skinning machines operating automatically. The product is placed on the conveyor belt and then passes through the cutting system, where the skin is separated from the meat. This type of operation helps increase process repeatability, reduce manual work and improve production efficiency. NOCK skinning machines are known for their solid construction, hygienic design and solutions that make cleaning and daily operation easier. The machine can be used for various meat cuts, including flat products and higher pieces such as hams, bacon, neck meat and other elements intended for further processing. The NOCK CB 501 is a good solution for companies looking for a used industrial skinning machine to automate the skinning process. The machine can operate as a standalone unit or as part of a larger cutting or production line. Technical data: Manufacturer: NOCK Dsdszi U Edepfx Acpjuw Model: CB 501 Type: belt skinning machine / automatic skinning machine Year of manufacture: 2008 Cutting width: 500 mm Power: 1.1 kW Power supply: 400 V Current: 10 A Phases: 3 phases Frequency: 40 Hz Condition: used Main advantages: automatic belt operation precise skinning of meat products 500 mm cutting width suitable for various meat cuts reduced manual work repeatable skinning result compact industrial construction easier hygienic maintenance suitable for meat processing and cutting plants renowned NOCK manufacturer

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Co., Ltd, controller model: FSCUT 2000C, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: RFL-C3000, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 3 mm, table length: 6,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 6,000 mm, working width: 1,500 mm, working height: 120 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 128 m/min, feed rate Y-axis: 128 m/min, feed rate Z-axis: 30 m/min, cutting speed: 1,20,000 mm/min, positioning speed: 128 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,500 kg, input voltage: 400 V, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 4,500 kg, total length: 7,500 mm, total width: 2,500 mm, total height: 1,950 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, CNC Fiber Laser Cutting Machine 6000 × 1500 mm 3000 W – Metal Technics Polska Professional Fiber Laser Cutting Machine The Metal Technics Polska F6000×1500 3000W CNC Fiber Laser Cutting Machine is designed for precision cutting of carbon steel, stainless steel, aluminum, brass, and copper sheets. Equipped with a Raycus 3000 W fiber laser source, WSX auto-focus cutting head, and BOCHU FSCUT 2000C CNC controller with CypCut software, the machine delivers excellent cutting quality, outstanding repeatability, and low operating costs. Duedpfx Acszkq S Nepjw Its 6000 × 1500 mm working area allows efficient processing of large metal sheets, making it an ideal solution for manufacturers, fabrication workshops, and industrial production facilities. Key Features 6000 × 1500 mm working area Raycus 3000 W Fiber Laser Source WSX Auto-Focus Cutting Head BOCHU FSCUT 2000C Control System with CypCut Software Maximum positioning speed: 128 m/min Positioning accuracy: ±0.03 mm Repeatability: ±0.02 mm Schneider Electric servo drives Japanese THK linear guide rails S&A industrial water chiller Automatic centralized lubrication system Heavy-duty stress-relieved steel frame Designed for continuous 24/7 operation Machine available from stock Technical Specifications Model: F6000×1500 3000W Laser Type: Fiber Laser Laser Source: Raycus RFL-C3000 Laser Power: 3000 W Working Area: 6000 × 1500 mm Laser Wavelength: 1080 nm Cooling Method: Water Cooling Power Supply: 380 V / 50–60 Hz Machine Dimensions: 7500 × 2500 × 1950 mm Maximum Cutting Capacity Material Maximum Recommended Carbon Steel 22 mm 16–18 mm Stainless Steel 10 mm 8–10 mm Aluminum 8 mm 6–8 mm Brass 6 mm 4–6 mm Copper 3 mm 2–3 mm Maximum cutting thickness depends on the material grade, surface quality, and assist gas used. For continuous industrial production, we recommend operating within the suggested thickness range to achieve the highest cutting quality, maximum productivity, and excellent edge finish. Equipment The machine is equipped with a WSX Auto-Focus Cutting Head, Raycus Fiber Laser Source, BOCHU FSCUT 2000C CNC Controller with CypCut Software, THK linear guide rails, Schneider Electric servo drives, S&A industrial chiller, and an automatic lubrication system. Every machine includes installation, operator training, technical support, warranty service, and after-sales assistance provided by Metal Technics Polska specialists. Transport & Contact We organize machine transportation throughout Europe and to countries outside the European Union. Each transport quotation is prepared individually based on the delivery destination and machine configuration. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. If you would like to receive a quotation or learn more about this machine, please contact our sales department. Visit the Metal Technics Polska website to explore our complete range of CNC machines, watch demonstration videos, and discover our latest offers and promotions.

Condition: excellent (used), Year of construction: 2017, 378 USED Vemag bread divider, model Robot 500 - Filler. TECHNICAL DATA: - Weight range: 5 g - 30 kg - Capacity: 2500-2800 pcs/h depending on the weight. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Dodpey Szavjfx Acpjuw bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 FOR HELICAP 23 PRO: YOM 2019 VERSION 400v 9.000 RUNNING HOURS Duodpfeyynd Rjx Acpow NEW CONDITION THE MACHINE IS IN PRODUCTION TILL MAY 15TH.

Condition: like new (used), Year of construction: 2016, TETRA PAK CARDBOARD PACKER CBP 32 V400 NEW CONDITION, FOR MULTI CARTON FORMATS LAST VERSION 600V YOM 2016 5477 RUNNING HOURS ONLY!! NORDSON PROBLUE FLEX UNIT NEW CONDITION Dedpfx Acjylny Uspouw LOCATION - POLAND READY FOR SHIPPING

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, operating hours: 8,869 h, load capacity: 2,000 kg, lifting height: 4,500 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,750 mm, gearing type: mechanical, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), overall weight: 3,800 kg, empty load weight: 3,800 kg, total height: 2,750 mm, total length: 2,600 mm, total width: 1,240 mm, maximum load weight: 2,000 kg, fuel: liquid petroleum gas (LPG), Equipment: pallet forks, sideshift, We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. Dedszk Ig Repfx Acpouw ===== WhatsApp in English between 9.00 and 21.00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp in French language from 9:00 to 21:00. ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,012 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: diesel, mast type: duplex, construction height: 2,500 mm, motor manufacturer: Mitsubishi S4S, gearing type: automatic, fork length: 1,300 mm, tire condition: 90 %, overall weight: 5,110 kg, empty load weight: 3,500 kg, total height: 2,500 mm, total length: 2,800 mm, total width: 1,300 mm, maximum load weight: 3,500 kg, fuel: diesel, Equipment: lighting, pallet forks, sideshift, New price: 13,900 EUR // Old price: 18,900 EUR Mitsubishi IS IN VERY GOOD CONDITION We sell forklifts after a full service. Prepared for the end-user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. Duedpfx Acszk H I Tjpow WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке с 9:00 до 21:00. ===== We are a company specializing in 4-way forklifts, side loaders, and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklift industry in Poland, and we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and perform a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready for operation. In Poland, upon the customer's request, we can arrange for the equipment to be inspected and approved by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve their logistical problems. We know how to properly prepare the machine and ensure the customer is satisfied and recommends us to other customers. We invite you to contact us and make use of our services. Do you need a forklift supplier? Contact us.

Condition: like new (used), functionality: fully functional, Year of construction: 2013, operating hours: 10,447 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, motor manufacturer: Toyota, gearing type: automatic, fork length: 1,780 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 300x15, rear tire size: 7,00-12, overall weight: 7,098 kg, empty load weight: 7,098 kg, total length: 3,000 mm, total width: 1,400 mm, maximum load weight: 4,500 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, cabin, pallet forks, sideshift, Old price 18,900 EUR // New 16,900 EUR Wide fork positioner + sideshift We sell forklifts after comprehensive servicing. Prepared for immediate use by the end user. We can arrange transport within Europe and worldwide. ===== WhatsApp in English between 9:00 and 21:00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp на французском языке c 9:00 до 21:00. ===== We are a company specialising in 4-way forklifts, side loaders, and counterbalance forklifts. Our team consists of qualified professionals with over 20 years of experience in the forklift and construction machinery sector. We employ some of the best forklift mechanics in Poland and have many satisfied customers across Europe. We are also a manufacturer of EPAL EUR pallets, known for our outstanding quality and timely deliveries. Before handover, we test each machine and perform a full service inspection. All necessary repairs are completed, ensuring you receive a forklift ready for immediate operation. In Poland, at the customer's request, we can arrange for approval by the State Office of Technical Inspection. Our main goal is customer satisfaction and effectively solving logistical challenges. We know how to properly prepare your equipment, ensuring your satisfaction and recommendations to others. Dusdpfx Aszk H H Ajcpow Contact us today to learn more about our services and solutions. Looking for a reliable forklift supplier? Get in touch with us.