Used Imagesetter Poland for sale (1,168)

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Djdpfx Ageymm D Ij Aeup Year of manufacture: 2008 – 2012 Working length: 3100 mm Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, What is controlled jacking? Controlled jacking is a trenchless technology that allows underground installations—such as water pipes, sewage pipes, power cables, electrical cables, telecommunications cables, fiber optic cables, water pipes, and sewage pipes—to be laid without the need for extensive excavation. The jacking machine is hydraulically driven and equipped with a pilot head that can be used to correct the path of the jacking. Thanks to measuring systems, the operator controls the depth and direction of the jacking, which allows for high precision, even with passages several dozen meters long, in situations where accuracy and precise avoidance of obstacles in the terrain are important in order not to damage the existing infrastructure and to safely bypass it. This solution is particularly valued in places where earthworks are difficult or impossible, e.g., under roads, lawns, tram tracks, parking lots, sidewalks, or urban areas. Why use controlled pipe jacking? Controlled pipe jacking is an alternative to traditional excavation, eliminating the need to dig up the surface. This method significantly reduces the time needed to complete the project, lowers the cost of restoring the site to its original condition, and minimizes the impact on traffic and the environment. The most important advantages of controlled pipe jacking technology: - no need to interfere with above-ground infrastructure, - the ability to work under obstacles (e.g., roads, sidewalks, lawns, property entrances, railroad tracks), - reduction of noise, - vibrations, and environmental pollution, - high route accuracy, - quick mobilization of equipment and short completion time, - lower risk of collision with existing installations. - no need to use bentonite slurry, - no spoil during jacking Thanks to these features, controlled jacking is commonly used in the construction of municipal networks, water and sewage connections, gas, fiber optic and cable connections. Application of controlled jacking Controlled jacking is ideal wherever installation is required without disrupting the surrounding area. The most common applications for jacking machines are: - crossings under roads and streets with heavy traffic, - jacking under railway and tram tracks, - crossings under watercourses and canals, -installations under sidewalks, parking lots, squares, and industrial areas, - connections to properties without digging up the entire area. With the ALUSTEER product, no drilling mud (bentonite) is used, which significantly reduces implementation costs and environmental impact. This technology can be used both in cities and in non-urban areas – wherever precision, speed, and reduced impact are important. Djdpfxexxhzwo Ag Aoup Accuracy and direction control Modern jacking machines use sensors that enable continuous monitoring of the head position. The operator tracks the parameters on the receiver and operator tablet and reacts in case of deviations from the planned route. Such solutions ensure: - high precision of the breakthrough, - safety for the existing infrastructure, - repeatability and predictability of results. In practice, deviations from the jacking axis are usually no more than a few centimeters, which is fully acceptable in most projects.

Condition: like new (used), Year of construction: 2020, For Sale: Brushing Machine CR24 Manufacturer: ELDRUT SYSTEM, Kielce, Poland Model: Brushing Machine CR24 Serial Number: 9/2020 Year of Manufacture: January 2020 Power Supply: 400V, 50 Hz Dodpowu Di Esfx Ag Aeup Certification: CE The machine is in very good condition, ideal for industrial brushing applications. Reliable construction according to European standards.

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 Duodsfy T H Ispfx Ag Aep 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 1,00,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 The same type as MPM 10000 Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. Dodpfslnllbox Ag Asup AHAT SK Ltd., Bulgaria +359 889 433449

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Dsdpfx Agjlnlmvs Asup

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 6 bar, total height: 1,270 mm, total width: 1,500 mm, pressure: 6 bar, type of input current: AC, empty load weight: 300 kg, input voltage: 230 V, heating capacity: 9 kW (12.24 HP), water tank capacity: 300 l, rotary table diameter: 1,000 mm, table load: 300 kg, table width: 1,000 mm, The ROT1000 rotary basket washer is a combination of modern technology and precision workmanship at every stage of the washer's development - this is, in short, the definition of an innovative design that will facilitate the process of washing large-size parts. The rich equipment of the device will provide us with high efficiency, economy and reliability at the workplace. A motor-driven rotary basket and spray nozzles increase the efficiency of the washing process. Parts undergoing the process are placed on a circular basket that rotates around its own vertical axis. The fully automatic control panel controls the work of the washer. STANDARD EQUIPMENT OF THE WASHER: - Sensor for disconnection of the closing lid when opening it during the washing process, - Liquid level sensor in the tank, protecting against dry operation, - Liquid temperature sensor, - One adjustable, stainless steel spray arm from the renowned spraying company System - Mechanically rotating basket, - Dual filtration, Dujdpfx Agoq I N S Ho Aop - Coarse insoluble impurities filter (1mm mesh filter), - Drain valve

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Dujdpfx Ajiimw Ajg Aep Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Small and medium format platesetting equipment (2-up and 4-up), using external drum technology. Plate type: Thermal aluminum plates with 830 nm sensitivity. Plate formats: Suprasetter A52: Maximum size – 670 x 530 mm. Suprasetter A74: Maximum size – 670 x 750 mm (sometimes listed as up to 680 x 760 mm). Dsdpfx Aoyb Tfusg Aoup

Condition: good (used), Year of construction: 2005, functionality: fully functional, Lighting prepress equipment Duedpfx Aeyb Tf Uog Aep

Condition: excellent (used), Year of construction: 2016, CTP System Screen PT-R 4600S Year of manufacture: 2016 32 fiber diodes Resolution: 2400 dpi Autoloader with one cassette (100 plates) Djdpfjyr Dg Rjx Ag Aoup Exposed plates: 280,000 Including Azura wash-out unit + stacker 1 Bit Tiff Shooter installed on PC

Condition: repair required (used), Year of construction: 1998, For Sale: 1. Heidelberg Herkules Elite imagesetter with Heidelberg Delta Tower computer. • Condition: Herkules Elite needs a new electronic block. Dusdpfsuhhgqex Ag Aep • Year: 1998 2. Glunz & Jensen 860 Multiline processor Condition: very good Year: 1998 Additional Information: • Sold directly by the owner • Viewing available on-site • Currently located in Kaunas, Lithuania • Terms: EXW (Ex Works) • Equipment is sold as a complete package, not separately

Condition: reconditioned (used), For Heidelberg Suprasetter A52/74 punching bar with Bacher punching modules. Complete. Dodpfx Aeyrbz Eog Aeup

Condition: good (used), Year of construction: 2005, functionality: fully functional, For sale: CTP platesetter Screen PT-R 4100 with interface (card + cable) Dedeykmy Repfx Ag Aoup

Condition: good (used), Year of construction: 2010, functionality: fully functional, For sale: Screen PT-R 4300S CTP platesetter with feeder/AGFA Avalon N4, GJ on-line processor, stacker, Apogee software with server. Djdpjykmywofx Ag Ajup

Condition: new, Year of construction: 2025, NEW CONTAINER / ONE WAY / Year of manufacture 2025 +Lock box +Forklift pockets Djdswu Uuxepfx Ag Aoup Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015

Condition: good (used), Year of construction: 2014, functionality: fully functional, Laser Moduls for Heidelberg Suprasetter, second hand, tested Duoded Aq U Uepfx Ag Aop 6 x GEN II, class 160 mW, 64 diodes, 2.540 dpi with various exposing hours prices and further information on request

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Screen PT-R4600 E/ Avalon N4-30 E S/N 462xxx, Djdpfx Aexlf Rvjg Asup 16 Fiber coupled ciodes, Plate count 10.792 Exposure time 1.045h Screen Blackbox Network Interface EP-B101 RIP on request. All offers subject to prior sale

Condition: used, functionality: fully functional, Laser head GEN II, various operating hours available Dusdpsyilydsfx Ag Ajp

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, The best imagesetter ever made: Screen Tanto 6120 (DT-R 6120) with online processor LD-M 1100 and Navigator v10 RIP with: TrapPro, Media Saving, Stochastic Screens (HDS), TIFF Output: I have both PC and Mac version. For Mac version it's older HQ RIP. Dedpfeyb A Nvex Ag Aoup Immaculate condition, in production and plugged in. I can make tests and record them.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Including: • Max. plate size: 940 x 1150 mm • 2 x DMD laserheads • Speed up to 21 plates per hour at 2400 dpi • 1 bit tiff loader Dedpfxjyf Egls Ag Aoup • Multi cassette loading • Plate count 251.000 • Extra spares: 1 x Laserhead, boards, punch • Printing plates stock included

Condition: good (used), Xcalibur 45s Elite with new laser, old laser is also still available. Djdpfx Agsxcurqj Ajup

Condition: used, Year of construction: 1990, Engine power: 2 hp Duodpfxjx Edl Ss Ag Asp

Condition: excellent (used), Year of construction: 2022, operating hours: 3,752 h, functionality: fully functional, Magnus 800 Plates 91251 Bacher die-cutter TFT PC Djdpfx Agjyarfws Aeup

Condition: excellent (used), Year of construction: 2011, Heidelberg Suprasetter 105 /SCL - 3 lasers, 2540 dpi–5080 dpi - Laser on time: 9818 hours - Bacher punching unit - 1 Bit Metashooter installed on Dell PC - Full maintenance contract with Heidelberg - Very good condition Dedpfxex Uq Alo Ag Ajup - Advand Stacker