Used Imagesetter Poland for sale (1,341)

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, feed length X-axis: 800 mm, feed length Y-axis: 450 mm, JUKI PS-800HB8045ZNZ – Programmable CNC Heavy Duty Sewing Machine – 800 × 450 mm For sale: JUKI PS-800HB8045ZNZ, an industrial, programmable CNC sewing machine in a Heavy Duty version, designed for precise sewing of technical fabrics, tapes, straps, and other textile products. The machine was manufactured in 2025 and has only approximately 200 operating hours. It is in very good visual and technical condition, practically like new. The unit is 100% functional, regularly serviced, and ready for immediate operation. The machine is located at our production facility in Gdańsk. It is possible to start it up, inspect it, and test it before purchase. Technical specifications * Manufacturer: JUKI * Model: PS-800HB8045ZNZ * Year of manufacture: 2025 * Operating hours: approximately 200 hours * Sewing area: 800 × 450 mm * Version: Heavy Duty – for sewing heavier materials * Control: electronic, programmable CNC * Automatic thread trimming * Sewing pattern programming * Control panel for operation and pattern programming * Possibility of importing patterns via USB * High accuracy and repeatability of sewing Additional equipment included in the price of the machine * Lower thread end sensor * Dedicated cassette / tooling for sewing MOLLE systems * Dedicated cassette / tooling for sewing mesh The additional tooling allows the machine to be used in the production of specialized textile products. Applications The JUKI PS-800HB8045ZNZ is ideally suited for the production of: * Tactical and military equipment * MOLLE systems * Backpacks, vests, and protective gear * Technical tapes and straps * Industrial textiles * Industrial filters Csdoz Dk Eyjpfx Aizjri * Mesh components * Other products requiring precise, repeatable sewing according to a programmed pattern Thanks to its large working area of 800 × 450 mm and the ability to program patterns, the machine is suitable for both serial production and the execution of specialized sewing operations. Technical condition The machine is used but is in near-new condition. * Fully functional * Very low operating hours – approximately 200 hours * Regularly serviced * Ready for immediate operation * Can be inspected during operation before purchase Location and sales conditions Location: Gdańsk, Poland The machine is available immediately. It is possible to view and test the unit at our production facility after prior arrangement. Sale is based on a VAT invoice. We can provide assistance with loading the machine. Additional photos and a video showing the machine in operation are available upon request.

Condition: good (used), Year of construction: 2018, The TREIF FALCON evolution is an advanced, high-speed industrial slicer and portion cutter for red meat, pork, poultry, and cheese – both bone-in and boneless. Introduced in 2018, the machine scans each piece with cameras, weighs it using an integrated scale, and automatically selects the cutting point to produce portions of a specified weight or thickness. This enables the production of consistent portions at high throughput and replaces manual portioning and weight control in processing plants. How does the TREIF FALCON evolution work? The product is placed on a conveyor and fed to a gripper, which guides it through the machine, while an upper clamp stabilizes the piece during cutting. Cameras scan the product from four sides, and an integrated scale measures its weight, allowing the software to combine anatomical and volumetric portioning. The blade is guided along the product’s contour and cuts slices or portions whose weight or thickness are automatically calibrated to the preset value. The portions are placed on the discharge conveyor and can be transferred to subsequent machines in the line, such as packaging, tray-loading, or freezing machines. The machine can be equipped with a pre-conveyor, a checkweigher, and sorting stations, which increase the accuracy and automation of the process. Key Benefits of the TREIF FALCON evolution The combination of high cutting speed, the 4D system, and stable product guidance delivers high throughput with repeatable precision, which limits portion giveaway and improves yield. The machine can divide product into portions in different weight categories at the press of a button, and optional software, including a Performance Pack that increases output and yield optimisation modules, lets the machine be matched to the plant’s requirements. The Premium-Hygiene-Design construction is open, and the opening mechanism and reduced accessory weight allow quick, easy cleaning and lower maintenance effort. An optional downstream check weigher (up to 300 weighing cycles per minute) with feedback control continuously regulates giveaway, while optional sorting, a robot for sorting and placement, a portioning separator, and a grouping unit reduce the need for manual work. Technical Specifications for the TREIF FALCON evolution Manufacturer: TREIF Model: FALCON evolution Type: Advanced, high-speed industrial slicer and portion cutter Year of manufacture: 2018 Power supply: 3-phase, 50/60 Hz Operating voltage: 380–480 V Control voltage: 24 V Rated current: 22–18 A Power cord fuse rating: 32 A Rated power: 11.3 kW Weight: 2,100 kg Technology: four-sided camera scanning, integrated scale, gripper, and pressure plate guiding the blade along the product’s contour Portioning modes: by weight or thickness, automatic cut calibration Maximum cutting speed: approx. 500 cuts/min Maximum product cross-section (W x H): approx. 260 x 180 mm Maximum length of the product being fed: approx. 800 mm Products: red meat, pork, poultry, and cheese, bone-in and boneless Included: double checkweigher, sorting station, outfeed conveyor, tool trolley, complete documentation Crodj Afxazepfx Aizji

Condition: good (used), Hang Piccolo 101-20 Eyeleting machine The machine is in perfect condition and ready to use. Made in Germany. Codpfs Ah Dcyex Aizjri Technical specifications: 1 head Eyelet diameter inside the hole: 4 mm. Maximum capacity: 20 sheets of 80gsm Front margin: 40 kg. Foot pedal operation The machine punches, feeds, and crimps the eyelet in a single pass.

Condition: good (used), Akebono OB-360 Banding Machine This machine is in very good condition and has been serviced. One of the most recognized machines in the world. The latest model. The machine operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it to create an elegant package. Ideal for wrapping business cards, flyers, calendars, and other materials. Cjdpe Ah Dc Iofx Aizsri Can be used with paper or foil tape. Technical specifications: Tape width: 29 mm Cycle speed: 28 cycles/min Frame dimensions: 420 x 210 mm Length: unlimited Weight: 40 kg. Made in Japan.

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, MBO Z2 is a fully mobile, independent knife folding unit mounted on a height-adjustable wheeled chassis. It is designed to perform an additional perpendicular fold on sheets coming from buckle folders, stitchers, or mailing lines. • 180° Rotating Knife Mechanism: Allows the knife unit to fold either upwards or downwards depending on the layout and sheet direction. • FW (Fenster-Weiche) Integration: Equipped with the synchronization interface required to communicate with automated gatefold (window fold) plates, ensuring precise timing and collision-free sheet processing. • Mobility: Independent drive and control system allowing easy pairing with multiple finishing lines. 2. Technical Specifications Parameter Specifications Infeed Length 80 mm – 320 mm Mechanical Speed Variable, 30 – 160 m/min Maximum Output Up to 15,000 cycles per hour Codpfxs Ahh Tzj Aizeri Maximum Product Thickness Up to 6 mm

Condition: excellent (used), Year of construction: 2011, Plate trolley for SCL (100 plates) - Screen 4000x - Agfa - Fuji Csdoy Rh Rlopfx Aizjri

Condition: excellent (used), Year of construction: 2014, Agfa Azura 125 CX Washout Station Csdpfx Ajwi Ilasizsri - Very good condition

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Credpfx Aslnlmvjizsi

Condition: used, Year of construction: 2000, • Max. imaging format: approx. 505 × 525 mm • Max. film width: approx. 530 mm • Material thickness: up to approx. 0.10 mm • Resolution: up to 200 lpi (256 grayscale levels), optionally up to 400 lpi with Delta Technology • Accuracy: ± 0.2 mil (0.005 mm) across the entire image area and with multiple films • Speed: up to approx. 1,320 mm/h film length • Interfaces: High-Speed Bitmap/SpeedWay Interface, RIP connection • Power supply: 100–240 V AC, 47–63 Hz (single-phase RIP), main unit 3-phase supply • Dimensions (L × W × H): approx. 1,200 × 750 × 1,100 mm • Weight: approx. 250–300 kg Codpowv Ea Uofx Aizori • Operation: daylight-loading, exposes film or RC paper, optional CTP plates (polyester)

Condition: excellent (used), CATALOGUE NUMBER 8145 Technical data: - max. blade diameter 370mm - spindle diameter 30mm - 2 pneumatic top pressure units - blade guard - pneumatic blade extension - max. cutting height 90mm - main motor 3kW - dust extraction nozzle diameter 100mm Cedpfx Ao Ah S Igoizeri - 2 roller tables - infeed roller table 2010mm - outfeed roller table 2040mm - roller table width 200mm - overall dimensions with tables (length/width/height) 4560x600x1070mm - weight 282kg ADVANTAGES – Made in Poland – 2 roller tables – Pneumatic blade extension – Used saw, very good condition Net price: 8900 PLN Net price: 2070 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: new, Year of construction: 2026, operating hours: 5 h, The NOMA NOWICKI MH-660 SAS is an advanced brine injector with servo-driven head and conveyor, fitted with 660 needles and designed for injecting red meat, bone-in and boneless, poultry, fish, and fillets. The machine, built in 2026, has multi-stage brine filtration with an FBN rotary filter, a head hygiene system, and touch-panel control. Documentation and tool trolleys are included. How does the NOMA NOWICKI MH-660 SAS brine injector work? The product is fed onto a conveyor that moves it under the needle head. The head and the conveyor have independent servo drive systems, and the conveyor drive is synchronized with the head, which allows many injection patterns. Conveyor speed is controlled electronically and head speed smoothly, so the injection is repeatable. The brine passes through a multi-stage filtration system: an internal filter with replaceable cartridges whose graduation is chosen to suit the needles, an FBN rotary filter with a slotted drum for the return brine, and a specially shaped filter bottom. The controller automatically monitors filter contamination. All injection processes are controlled and programmed from the touch panel. Key advantages of the NOMA NOWICKI MH-660 SAS brine injector A large number of needles and independent servo drives for head and conveyor give a dense, repeatable injection pattern and a high degree of control over the process. Exchangeable needle heads and a choice of needles and process settings allow the machine to be matched to different raw materials and recipes. Multi-stage filtration with automatic contamination monitoring, quick replacement of needle heads, and a head hygiene system that shortens internal washing time make it easier to keep the machine clean and running. The touch panel simplifies operation and process programming. Technical specifications of the NOMA NOWICKI MH-660 SAS brine injector Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector (SAS injector) Model: MH-660 SAS Year of manufacture: 2026 Credpfe Ahncwjx Aizoi Power supply: 3 x 400 V, 50 Hz Marking: CE, made in the EU Number of needles: 33 x 20 = 660 needles Needle diameter: 2 mm Belt width: 600 mm Dimensions with brine filter (L x W x H): 3000 x 2210 x 1870 mm Drives: independent servo drives for head and conveyor, conveyor synchronized with the head Conveyor speed: electronically controlled Head speed: smoothly adjustable Filtration: multi-stage, internal filter with replaceable cartridges, FBN rotary filter with slotted drum, specially shaped filter bottom, automatic contamination monitoring Head: quick replacement of needle heads, head hygiene system Control: touch panel, control and programming of all injection processes Documentation: included Tool trolleys: included

Year of construction: 2026, operating hours: 5 h, condition: new, functionality: fully functional, NOMA NOWICKI MHM-21/84 F is a brine injector designed for the uniform injection of fish and seafood, both boned and unboned, and – after a quick needle change – any other boned or unboned products, such as poultry. Manufactured in 2026, the machine features 21 needle sockets (84 quadruple needles), steel needles operating at a brine pressure of up to 3 bar, microprocessor control with a color touchscreen, and an AISI 316 stainless steel construction in food-contact areas. Replacement parts are included. Key Advantages of the NOMA NOWICKI MHM-21/84 F Brine Injector The machine ensures even distribution of brine in delicate products, such as fish fillets and seafood, and, after changing the needles, is suitable for injecting poultry and other products, whether bone-in or boneless. Smooth adjustment of pressure and head speed, 2-mm-diameter needles, and three-level pressure adjustment allow the injection process to be tailored to various raw materials and recipes. Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: brine injector Model: MHM-21/84 F Serial number: 01126803 Year of manufacture: 2026 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Installed power: 2.4 kW, maximum current 12 A Pump power: 1.5 kW Construction: AISI 316 stainless steel in food-contact areas, AISI 304 in other components; designed for use in the fishing industry Number of needle sockets: 21 Maximum number of needles: up to 84 (quad needles) for fish and seafood, or 42 for poultry Needle diameter: 2 mm Head: easily replaceable, with quadruple needles as standard, top-side needle loading Head drive: top-mounted, NORD gearbox with frequency converter, stepless speed control Number of head strokes: 21 – 44 strokes/min Maximum head stroke height: 110 mm Maximum product height before injection: approx. 90 mm (up to 110 mm after injection) Removal clamp: adjustable to 3 heights, prevents over-injection Conveyor: easy-to-clean plastic belt, 325 mm wide Conveyor feed per head stroke: adjustable, 16; 35; 75 mm/cycle Brine pressure: continuously adjustable from 0.5 to 3.0 bar (in 0.1 bar increments), up to 3 bar as standard Brine pump: centrifugal, high-efficiency, stainless steel, controlled by a variable-frequency drive Filtration: multi-stage, easy to clean, with an additional tubular filter for improved brine purification Brine tank: stainless steel, 80 L, with brine mixing (preparation) and drainage Injection rate for a single pass (salmon): up to 12% Controls: microprocessor-based HMI, MITSUBISHI color touchscreen, MITSUBISHI PLC, variable-frequency drives on the gearbox and brine pump Crodpfxj Aggiqo Aizei Throughput (approximate, for 1 pass): Herring fillets: injection rate approx. 10%, approx. 200 kg/h Salmon fillets: injection rate 8 – 12%, approx. 250 kg/h Poultry fillets: injection rate 25 – 30%, approx. 500 kg/h Chicken drumsticks: injection rate 20%, approx. 500 kg/h Chicken necks and wings: injection rate 12%, approx. 400 kg/h

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 40, Equipment: chip conveyor, Mikron VCE1000 pro Machining Center Year of manufacture: 2016 Control system: Heidenhain TNC 620 X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Tool magazine: 40 positions Maximum spindle speed: 16,000 rpm Spindle taper: HSK63 Table dimensions (mm): 1000 x 560 Machine equipped with Heidenhain linear scales on the XYZ axes Tool probe: Renishaw OMP40-2 Through-spindle coolant (IKZ) Codpe Afn Egjfx Aizori High-pressure pump with paper filter Chip conveyor Spindle operating hours: 7254 hours

Condition: like new (used), functionality: fully functional, Year of construction: 1999, operating hours: 24 h, overall weight: 1,200 kg, total width: 1,000 mm, total height: 2,500 mm, I am selling stainless steel MK2 M&P engineering onion peeler, machine is fully refurbished, after full service & ready to work. The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance. Link for video presentation by producer: Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion Cjdpfxjurb R Es Aizsri

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, The best onion peeler in the world, the most expensive but the hardest, the most simplest ! Fully services, we can offer full support for our clients, machine been fully refusrbishment and ready to work. Capacity of peeled product depending of onion size: Pjtx Eswb Uuxodn Dorc 50-70 mm +-250 kg/h 60-80 mm +-450 kg/h 70-90 mm +-750 kg/h 90mm+ +- 1000 kg /h Cjdpfxexta U Es Aizsri Machine is fully stainless steel ! Very little used after full service ready to work, we help you with technical support and with spare parts ! Machine require air screw compressor min 2700 l/m 5-8 bar We can help configurate your factory!

Condition: used, Year of construction: 1990, Engine power: 2 hp Crjdpfex Edl Sjx Aizji

Condition: excellent (used), Year of construction: 2001, I have a Deckel Maho DMU 60T machining center for sale. Control system: Heidenhain 430 Technical condition of the machine: Very good Year of manufacture: 2001 Country of origin: Germany Machine parameters: X-axis travel: 630 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Swiveling head Maximum spindle speed: 12,000 rpm Tool magazine: 24 tools (2 x 12 tools) Heidenhain linear scales on all axes Chip conveyor Central lubrication Hydraulic tool clamping Spindle taper: SK40 Complete programming manual Mechanical and electrical documentation Loading is included in the price Crodpfx Ais Ahdrvezei Stal-Com has been involved in the sale, service, and training for CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers throughout Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production at the customer's facility. We cooperate with many companies on a long-term basis, supplying them with additional machine tools.

Condition: used, functionality: unexamined, Boschert Profi 28/1400 CNC 28 tons Crodpfe Ahm Nnox Aizji working length 1400 mm year 2007

Condition: excellent (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work – after full service Crsdpfx Aio Af Nqnezei - motor: 2x 2.2 kW - saw blade diameter: 400 mm (cut-off blades) - max. cutting length: 3400 mm - pneumatic feed - vertical and horizontal pneumatic profile clamping - electronic cutting length display - support for longer profiles

Condition: reconditioned (used), For Heidelberg Suprasetter A52/74 punching bar with Bacher punching modules. Complete. Cjdeyrbz Ejpfx Aizeri

Condition: used, Year of construction: 2010, SMEC PL60A/3200, year 2010 Main operating parameters Credpfx As Ahh Nzoizei Fanuc control • Maximum turning length: 3200 mm • Maximum workpiece diameter: 900 mm • Cross-travel over the bed: 1030 mm • Maximum diameter of workpiece bar: Ø 140 mm • Chuck size: 21 inches (optional 24 inches)

Condition: new, Year of construction: 2026, machine/vehicle number: 3208, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 125 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, total length: 6,700 mm, total width: 4,670 mm, total height: 1,480 mm, overall weight: 815 kg, Equipment: CE marking, documentation/manual, saw blade guard, Piła formatowa LAZZURI FX 3200 przeznaczona jest do cięcia drewna oraz materiałów drewnopochodnych, takich jak płyty wiórowe, MDF i sklejka, przy zastosowaniu odpowiedniej tarczy. Maszyna sprawdzi się w warsztatach stolarskich, zakładach meblowych oraz przy produkcji elementów na wymiar. Stół formatowy o długości 3200 mm umożliwia obróbkę materiałów wielkoformatowych, a pochylany agregat pozwala na wykonywanie cięć prostych oraz pod kątem. Pilarka wyposażona jest w silnik główny o mocy 5,5 kW oraz podcinak napędzany osobnym silnikiem o mocy 0,75 kW. Trzy prędkości obrotowe tarczy głównej pozwalają dopasować pracę do obrabianego materiału i zastosowanego narzędzia. DANE TECHNICZNE: – producent: LAZZURI, – model: FX 3200, – typ maszyny: piła formatowa z podcinakiem, – moc silnika głównego: 5,5 kW, – moc silnika podcinaka: 0,75 kW, – maksymalna średnica tarczy głównej: 400 mm, – maksymalna średnica tarczy podcinaka: 120 mm, – prędkość obrotowa tarczy głównej: 3000 / 4000 / 5000 obr./min, – prędkość obrotowa tarczy podcinaka: 8000 obr./min, – maksymalna długość cięcia: 3200 mm, – maksymalna szerokość cięcia: 1250 mm, – maksymalna wysokość cięcia przy 90°: 125 mm, – maksymalna wysokość cięcia przy 45°: 85 mm, – zakres pochylenia agregatu: od 90° do 45°, – regulacja wysokości cięcia: ręczna, – regulacja kąta cięcia: ręczna, – średnica króćca odciągowego: 100 mm, – masa maszyny: 815 kg. STÓŁ I PROWADNICE: – aluminiowy stół formatowy o długości 3200 mm, – szerokość stołu formatowego: 418 mm, – stół prowadzony na prętach za pomocą systemu rolek, – rozsuwana przykładnica poprzeczna o maksymalnej długości 3200 mm, – dwa przesuwne ograniczniki na przykładnicy poprzecznej, – szkła powiększające ułatwiające odczyt skali przy ogranicznikach, – przykładnica równoległa z aluminiowym liniałem o długości 700 mm, – skala przykładnicy równoległej do 1250 mm, – blokowanie przykładnicy równoległej za pomocą szybkozacisku. WYPOSAŻENIE I FUNKCJE: – podcinak z osobnym silnikiem, – podwójnie łożyskowany wał piły, – trzy prędkości obrotowe tarczy głównej, – zmiana prędkości za pomocą pokrętła, – ręczna regulacja wysokości i kąta cięcia, – wskaźnik zegarowy przy regulacji, – elektroniczny licznik do ustawiania szerokości cięcia. WYMIARY WYMAGANE DO USTAWIENIA MASZYNY: – długość: 6700 mm, – szerokość: 4670 mm, – wysokość: 1480 mm. ZALETY MASZYNY: – długość cięcia 3200 mm, – szerokość cięcia 1250 mm, – możliwość cięcia pod kątem do 45°, – maksymalna wysokość cięcia 125 mm przy tarczy 400 mm, Cjdps Af If Tsfx Aizsri – podcinak z niezależnym silnikiem, – trzy prędkości obrotowe tarczy głównej, – możliwość obróbki dużych płyt i elementów meblowych.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, DEFUM WFM 100N CNC Horizontal Boring and Milling Machine | Siemens 828D | Rebuilt by METALEX in 2014 For sale: DEFUM WFM 100N CNC horizontal boring and milling machine with a rotary worktable and an extendable boring spindle. The machine underwent a complete overhaul, rebuild and modernization by METALEX in 2014. It is equipped with a Siemens SINUMERIK 828D CNC control and a Siemens SINAMICS drive system. Its heavy, rigid construction, 100 mm boring spindle and 1100 × 1100 mm worktable make it suitable for milling, drilling and boring housings, plates and other engineering components. TECHNICAL DATA Manufacturer: DEFUM, Dąbrowa Górnicza, Poland Model: WFM 100N Serial number: 8137 Year of manufacture: 1986 Complete overhaul, rebuild and modernization: 2014, METALEX CNC control: Siemens SINUMERIK 828D Drive system: Siemens SINAMICS Table and travels: – Table working surface: 1100 × 1100 mm – Transverse travel: 1200 mm – Vertical travel: 1000 mm – Longitudinal travel: 900 mm Csdpfxo Ahzavo Aizori Spindle and drives: – Boring spindle diameter: 100 mm – Spindle motor power: 18.5 kW – Feed drive power: 3 × 4.5 kW – Total installed power: 50 kW Dimensions and weight: – Length: 4610 mm – Width: 3620 mm – Height: 3110 mm – Machine weight: 11,000 kg EQUIPMENT – Siemens SINUMERIK 828D CNC control – Siemens SINAMICS drives – Rotary worktable with T-slots – Extendable boring spindle – Operator panel mounted on a swivel arm – Coolant supply system – Central lubrication system Key feature: complete overhaul and modernization carried out by METALEX in 2014, including a Siemens CNC control retrofit. Please contact us for further information about this offer.

Condition: good (used), Polar Mohr PW-4 ABV Pile Turner Ready-to-use. This is one of the most powerful turner models on the market. The machine features an aeration system, a shaking system, and a hydraulic lock for head rotation. Side margin. Technical specifications: Format: 1200 x 800 mm Stack height: 1350 mm Load capacity: 1000 kg Crsdpo Agq Ilefx Aizei Device weight: 1600 kg 380V power supply Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, small footprint.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Crodpfx Asfy T H Ijizsi Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡