Used Imagesetter Poland for sale (972)

Condition: good (used), functionality: limited functionality, overall weight: 11,000 kg, empty load weight: 11,000 kg, Year of construction: 2003, operating hours: 12,000 h, machine/vehicle number: OMB4258-OMB, Rogers sequential protective atmosphere brazing furnace (CAB) for heat exchanger production. Attached are the furnace description and all necessary technical details. All diagrams and documentation are available. The furnace is located at Loscar, Rabczyn, 64-440 Poland. This is a used furnace previously operated at (Bhera), now Mahle, in Stuttgart, Germany, for testing and brazing heat exchangers for 10 years, then taken out of service and stored under excellent conditions in heated warehouses. The furnace was disassembled in Stuttgart by Seco Warwick. Maximum dimensions of brazed heat exchangers: 1300mm x 1300mm x 400mm. Located at Loscar since 2021, available for physical inspection. We can provide all diagrams and technical documentation upon request. Iijdpfx Aasxn Ivyoboh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fuji Film LUXEL T-6500CTP S Thermal Platesetter (2017) – B2 Format Technical Details and Equipment List: A. CTP PLATESETTER – LUXEL T-6500CTP S ● Technology: Thermal CTP ● Year: 2017 ● Laser Head: 32-channel (S Version) ● Productivity (B2): Up to 21 plates/hour at 2400 dpi ● Max Plate Size: 830 x 660 mm ● Min Plate Size: 324 x 330 mm ● Imaging Area: 830 x 636 mm ● Plate Thickness: 0.15 – 0.30 mm ● Resolutions: 2400, 2438, 2540 dpi ● Power Supply: 200/240 V, 47/63 Hz, Single-phase 35 A / 5 kW ● Weight: 830 kg ● Dimensions (L x W x H): 1985 x 1315 x 1300 mm ● Condition: Used, in daily production. Available for immediate inspection and testing. B. RIP & SOFTWARE SYSTEM ● RIP Processor: FujiFilm XMF PROCESSOR V6 4UP BUNDLE ● Functionality: RIP for B2 format, standard screening, HR/LR output, ICC/DLP/CIP3 support ● License: XMF DONGLE ONLY security key included ● Computer: Dedicated PC for XMF Gateway C. PLATE PROCESSOR ● Model: FLH-Z 85CD Iijdpfxexm Td Ho Aabsh ● Max Plate Width: 850 mm ● Min Plate Length: 285 mm ● Plate Thickness: 0.15 – 0.40 mm ● Developing Speed: 15 seconds (dip to nip) ● Developer Tank: 30 L ● Weight: 364 kg (dry) Commercial Information: ● Availability: Machine is active in production. Reason for sale is an upgrade to a larger format.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 21,927 h, Control Unit Brand FANUC Model Series 21i-MB General Data Isdpfx Aaexfwxlsbeih Measurements width 2770 mm Measurements depth 4950 mm Measurements height 2804 mm Machine weight 15000 Main Drive Spindle speed range 8000-12000 Spindle motor power 22 kW Number of axis 4 Movement X-Axis Movement 850 mm Y-Axis Movement 700 mm Z-Axis Movement 750 mm Workpiece Workpiece weight 500 kg Table Outer length 500 mm Outer width 500 mm Tools Max weight 8 kg Max tool diameter 40 mm Max tool length 400 mm This HYUNDAI KIA HS500i Horizontal Machining center was manufactured in 2008. The 4 axis machine has a total of 21927 working hours. It operates through a FANUC Series 21i-MB control unit. The machine reaches a 12000 rpm spindle speed. It is in good technical condition, has full documentation and is ready for testing. Application Types Milling

Condition: new, Year of construction: 2025, Available in stock Worldwide delivery Diesel engine. Drum capacity (0,8 m3). Fuel tank for 50l (equipped with a fuel level indicator). Control panel with indicators. Iedod Swnvjpfx Aabjih Mixing of asphalt inside the tank. Front loading/unloading. More options: Bucket + trailer Trailer No trailer, no bucket

Condition: used, machine/vehicle number: 007965, Lifting capacity: 200 Kg Iisdpfx Aajw Ic Ryjbeh Work capacity: 8 Cycles/min Movement system: suction cups.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, total length: 3,000 mm, total width: 1,000 mm, grinding height: 150 mm, grinding wheel diameter: 300 mm, overall weight: 2,500 kg, grinding spindle motor power: 11 W, grinding wheel speed: 1,450 rpm, Equipment: documentation/manual, The GRAFS GRfix-1500e is a heavy-duty surface grinding machine designed for rough and high-performance grinding of steel plates. Developed and manufactured entirely in Poland, this model combines robust construction, long service life, and user-friendly electronic control. Iiodjxmhyiepfx Aaboh Main features: - Electromagnetic table 300×1500 mm, S-pole, holding force 120 N/cm² - Grinding motor 11 kW, high-quality Polish production - Segmented grinding wheel Ø300 mm, 6 aluminium oxide segments - Laser sensor for automatic workpiece height detection (as an additional option) - PLC control (Mitsubishi) with 7” HMI touchscreen – programmable grinding cycles (rough pass, automatic downfeed 0.001–0.05 mm, spark-out, pause, auto-stop) - Stepper motor feed with encoder for precise vertical adjustment - Mitsubishi inverter – variable carriage speed 1–16 m/min - Remote diagnostic support via Internet (Wi-Fi connection) - External coolant filtration system MS60 with rotary magnetic drum separator, 150 L tank, and 60 L/min pump - LED 24V working light and internal coolant pipe for table flushing - Powder-coated body: RAL7012 (frame) / RAL7021 (carriage) Mechanical design: - Extremely rigid welded steel body (10 mm thick plates, stress-relieved) - Carriage on PWTR precision rollers for smooth and silent motion - Replaceable hardened steel guide strips - Quick manual positioning of the carriage above the workpiece - Fast up/down movement of the spindle motor for easy tool change - Easy mounting system for the grinding wheel – only three bolts - Maximum workpiece height: 150 mm Optional equipment: - Accordion-type bellows covers - Alternative coolant filtration units (magnetic, paper, or combined) Advantages: - Perfect for rough surface grinding of large steel plates - Designed for high efficiency and long-term stability - Fully European components – Mitsubishi Electric control system - CE conformity, electrical inspection and Polish technical documentation (DTR) included Warranty: 12 months Technical data summary: Parameter Specification Grinding table: 300 × 1500 mm (electromagnetic, S-pole) Max. workpiece height: 150 mm Grinding wheel: Ø300 mm, 6 segments Spindle motor power: 11 kW Carriage speed: 1–16 m/min Downfeed: Automatic 0.001–0.05 mm Control system: PLC + 7” HMI Mitsubishi Coolant system: MS60 magnetic separator, 150 L tank, 60 L/min pump Weight: ~2800 kg (depending on configuration) Power supply: 400V / 50Hz Made in Poland The GRAFS GRfix-1500e is a professional surface grinder built for intensive, rough grinding applications where high metal removal rate and long-term precision are essential. A reliable, industrial-grade solution for steel fabrication shops, tool manufacturers, and service centers.

Condition: excellent (used), Year of construction: 2009, operating hours: 150 h, functionality: fully functional, power: 30 kW (40.79 HP), Chipper Shredder Teknamotor SKORPION 280EB/2 - manufactured in Poland - year of production 2009 TECHNICAL PARAMETERS: Material diameter 140 mm main motor 30 kW number of knives 2 pcs. length of knife 270 mm length of infeed transp. 2500 mm Iisdpfx Asxmif Hsabsh belt width 280 mm transport dimensions (length / width / height) 4100 / 1000 / 1550 mm weight about 1000 kg

Condition: used, Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production. Specifications: Power: 15 kW Iijdpfxsxdw I Re Aabsh

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand MITSUBISHI Model M720 SSS Main Drive Spindle speed range 15000 Tool taper ISO40 Number of axis 5 Movement X-Axis Movement 1140 mm Y-Axis Movement 610 mm Z-Axis Movement 810 mm Table Table load 850 kg Additional Equipment Air blast through spindle Rotary table with counter-support and hydraulic lock – 360° rotation Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes Coolant through spindle, 20 bar + low-pressure cooling system Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe Chip flushing system Chain-type chip conveyor Telescopic covers for X, Y, Z axes Full machine enclosure with safety door lock Central lubrication system with oil cooler This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Application Types Milling Isdpoxfwxxefx Aabjih

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 37,970 h, laser power: 5,000 W, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 2,400 kg, TECHNICAL DETAILS Travel distances Travel distance X-axis: 6000 mm Travel distance Y-axis: 2000 mm Travel distance Z-axis: 115 mm Laser power: 5,000 W Maximum workpiece weight: 2,400 kg Maximum positioning speed Parallel/Simultaneous X-axis: 200 m/min Maximum positioning speed Parallel/Simultaneous Y-axis: 282 m/min MACHINE DETAILS Laser type: CO2 TLF 5000 Electrical connection: 105 kVA / 400 V (± 10%) / 50 Hz (± 1%) / 3 Phase / 160 A Gas consumption CO2: 1 l/h Gas consumption N2: 6 l/h Gas consumption He: 13 l/h Operating hours Laser hours: 37,970 h Power-on hours: 66,500 h Iedpfxexnqcis Aaboih EQUIPMENT Automatic pallet changer Longitudinal belt conveyor PlasmaLine-PMS (Plasma Monitoring System) SprintLine Blowing Gas flushing Piercing Marking ContourLine AutoLas Plus PierceLine Note: The LiftMaster is not included in the scope of delivery or sale.

Condition: excellent (used), 167 USED stainless steel internal flour silos: 2 silos of 6 tons each, 1 silo of 8 tons (can increase silo capacity by approximately 50%). EXTERNAL DIMENSIONS (in cm): Iiodpjxl Taxofx Aabeh - width: 320, - length: 550, - height: 400. EQUIPMENT: - Flour unloading station for bowl no. 1 with flour/dust collector, - Flour unloading station for bowl no. 2, - Water mixer, - Overhead scale for weighing the dough bowl + computer, - IMPORTANT: Automatic water and flour dosing to the leaven generator, - Leaven generator with constant leaven temperature (heating, cooling), - Dosing of leaven to the bowl from the leaven generator, - 2 control panels. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 2700071001, type of input current: three-phase, input frequency: 50 Hz, nominal power (apparent): 1,600 kVA, Transformer from dismantling. Removed due to replacement with another one of higher power. Throughout its entire period of operation, the transformer underwent regular insulation resistance tests. Iisdpfsxm S Spex Aabjh The last test was valid until May 2025. TRANSFORMER AEG - MEFTA MEFTABLOK - used 1600 kVA TYPE: TZM 1600/15 No.: 2700071001 YEAR OF MANUFACTURE: 1997 POWER: 1600 kVA NUMBER OF PHASES: 3 FREQUENCY: 50 Hz

Condition: new, Year of construction: 2025, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Iijdpfx Aaoirmgfobsh Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: used, Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPa*s. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in food production. Iiedpjxdw Iwsfx Aabsh

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,772 h, Control Unit Brand HEIDENHAIN Model TNC 620 Main Drive Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Tools Type of tool holder SK40 Media Chip conveyor Yes Isdpjxfcpijfx Aabsih This 5-axis DMG MORI CMX 50 U was manufactured in 2019. It features a 500 mm X-axis, 450 mm Y-axis, and 400 mm Z-axis, complemented by a B-axis and C-axis for enhanced precision. Equipped with SK40 tool holders, a 30-tool magazine, and a chip conveyor, this vertical machining center is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 50 U machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2015, For sale: Complete robot milling cell with ABB IRB 4400, year 2015. The cell was built and commissioned in 2016 by RobMaxx (robot-machining.de). Usage: Exclusively used for milling prototypes from soft foam Very low operating hours: approx. 2,000–3,000 h Scope of supply: - ABB IRB 4400 robot, year 2015 Iijdjxn Dgbepfx Aabjh - Control panel - Control cabinet for the robot, automatic tool changer, air supply and extraction system, including cooling air conditioner - Cell constructed from aluminum profiles with double windows (presumably plexiglass) - ESTA 81200 EUROSOG-I-D ATEX extraction system, year 2016 - 360° aluminum rotary table - Robot base/table constructed from aluminum profiles with a fully machined aluminum plate (leveled with adjustable feet) - Automatic tool magazine for 22 tools - High-speed spindle 36,000 rpm by DIEBOLD, liquid-cooled with air support - Complete documentation - Invoice with 23% VAT or intra-community delivery (0%) Condition: Inspection required Damage: Display – F Price: €28,999 Pickup location: 58-500 Jelenia Góra, Poland Invoice available

Condition: new, Year of construction: 2025, 2040 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Iijdpfx Aajin Uilebsh Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 4100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Year of construction: 2020, condition: used, SPITZENBERGER & SPIES – On-Board Power Supply Simulation System PAS 15000/GN/KFZ/OPD The following tests can be performed according to the specifications: • Audi BDM LAH XXX.915.181.XX • ISO 7637-2 • ISO 16750-2 • ISO 21848 • LV 124 • SAE J 1113-11 • VW TL 80101 • VW TL 82066 • VW TL 82366 The system includes: Iisdpfx Asxn Dfdeabsh • Power Supply NT 15000/GN/Kfz • SyCore • Two-Quadrant Amplifier PAS 15000/GN/Kfz • Surge Protection Device OPD 15000/GN/Kfz Condition: Inspection required. Price: €8,999.00 Pickup location: 58-500 Jelenia Góra, Poland. Device weight approx. 1000 kg. Damage: Display – F VAT invoice included

Condition: new, Year of construction: 2025, 1525 ATC milling ploter THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 1525 ATC milling plotter is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. Iiedpfx Aein Eyveaboh CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1520 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist Iijdpfjin Eztox Aabjh - any size of the working table

Condition: new, Year of construction: 2025, 1020 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 2000 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table Iiodpfx Aaein Ezdobeh

Condition: new, Year of construction: 2025, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. Ijdoin Eu Hjpfx Aaboih SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 1012 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1000 x 1200 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump Iodoin Ewzepfx Aaboih - chip extraction system - oil mist - any size of the working table

Condition: new, Year of construction: 2025, 2030 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. Iiedjin Eqfjpfx Aabjh SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist

Condition: new, Year of construction: 2025, THE MACHINE HAS A TOOL STORAGE EQUIPPED WITH 6 ISO30 CONES !!! CNC 2030 ATC CNC Router is a precise machine constructed in Poland, it is used to process many engineering materials, i.e. wood, wood-based materials (chipboard, MDF, OSB etc.), plastics (plexiglass, PVC, HPL etc.), composites (dibond, carbon, alucobond), soft metals, etc. The ATC series machines have an additionally reinforced structure and the applied AC servo drives on each axis, coupled with an affordable price, leave the competition far behind. CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. Ijdpein Ek Dofx Aaboih WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table