Used Indexers for sale (1,152)

Condition: used, mileage: 48,847 km, power: 390 kW (530.25 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2024, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Sleeper Cab * Front chassis design: robust * Mechanical cab suspension * Exterior sun visor * Flexible cab step * Horns, 1 set * LED headlights and fog lights * Two LED headlights for the rear cab wall * Rotating beacons on the front cab, prepared * Handle and surround: black, side panels: cab color * Windshield with sun protection film * Rear window: double-glazed * DAF Corner View * Central locking, 3 keys, 2 remote controls * Leather steering wheel * Interior trim color: Luxury * Driver's seat: Luxury Air * Armrests on both sides of the driver's seat * Passenger seat: Cinema with fabric upholstery * Dashboard table * Center storage compartment * Cooler or refrigerator * Curtains (without divider) * LED interior lighting * Automatic cab climate control * Auxiliary heating with waste heat pump and timer * Driver's side roller blind * Electric roof hatch * FMS connector, extended and prepared * DAF Connect * Toll preparation * Digital tachograph, VDO 1C, version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB-prepared, radio, 2x mobile antennas GNSS Extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Lane Departure Warning System * Electronic Stability Control (VSC) * Reverse Alarm * Front: 8.00 t, parabolic, 167 N * Front axle 1, 8,000 kg, load index 156 * Rear suspension 21.0 t/Brakes 21.0 t * Rear axle load capacity 10.50 t + 10.50 t * Rear: 21.00 t, trapezoidal, HR1670T * Rear axle 1, 12,600 kg, load index 148 * Front leaf spring suspension, extra high * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Goodyear * Silver-gray steel disc wheels * Silver-gray wheel trim rings * MX-13 engine, 390 kW/530 hp Cab emblem: 530 * Euro 6 emissions class * ECO performance * Automatic idle shutoff, 5 minutes * Automated transmission, TraXon, 12 gears * 12-speed TraXon transmission 12TX2610 OD, 12.92-0.77 * Maneuvering mode * Automatic transmission with manual transmission, full version * Off-road use with rocking function * Rear axle ratio 3.61 * Mechanical differential lock * Traction control (ASR) * ZF Intarder * Pneumatic control for parking brake * Spring-loaded brake cylinder, first front axle * Spring-loaded cylinder on tandem rear axles 1 and 2 Hnodpfxoqgaizs Adwog * Parking brake assist * 2-cylinder compressor without clutch * Driven rear axle with drum brakes * Wheelbase 4.05 m/rear overhang 1.50 m tipper * Longitudinal member 310/7.0 mm, with internal adjustment front/rear * EAS unit right, vertical rear + 45 l exhaust tank left * Steel compressed air tank * 340 l aluminum fuel tank left, height 505 mm * Fuel tank left * Splash guard * Use with drawbar, type plate, up to max. GVW * Cross member D200 + Ringfeder coupling D200 * Pneumatic connection for trailer, swivel coupling * Trailer electrical connection 24V/15-pin Cable: 15-pin + EBS * CAN J1939 functions in the body connector * Air control preparation for tipper use * Side marker lights * First transmission PTO NH/4c-R-27/30 * 110 A generator, 2 x 230 Ah batteries * Heated fuel pre-filter * Dust shield * Powertrain Plus Warranty - 3 years - 200,000 km * Technical inspection before delivery BODY - MEILLER TRIGENIUS D316 - 200 mm higher, welded bulkhead with deflector adapted to the space available - Bordmatic left (1 Bordmatic cylinder) - Swinging right side panel with manually operated claw lock - Swinging

Condition: excellent (used), Year of construction: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 Including indicated tools and sub-spindle Control: Mazatrol PC Fusion CNC 640T Technical specifications: Max. swing diameter: 525 mm Max. swing diameter over saddle: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (freely configurable with stationary and driven tools) Turret indexing time – 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Hnjdsx Hgl Hepfx Adweg Travel: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000°/min

Condition: ready for operation (used), Year of construction: 2007, operating hours: 23,663 h, General Data Measurements width 4000 mm Measurements depth 6000 mm Measurements height 2500 mm Machine weight 10600 kg Control Unit Brand Siemens Model Sinumerik 840D Main Drive Number of axis 4 Movement Hnedex I S Shjpfx Adwsg X-Axis Movement 560 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Media Internal cooling Yes Additional Equipment 4 Pallets 400 x 400 included with machine, indexed 4th axis by 1 degree Workpiece probe Internal cooling Large coolant tank with automatically coated filter paper This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, Z movements of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12000 rpm. The machine includes a SK40 spindle taper, a 60-position tool magazine, and four 400x400 mm pallets with a 1-degree indexed 4th axis. Consider the opportunity to buy this DECKEL MAHO DMC 55H duoBlock horizontal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 1986, operating hours: 1,200 h, functionality: fully functional, total height: 1,520 mm, total length: 2,580 mm, total width: 1,440 mm, workpiece weight (max.): 200 kg, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,500 rpm, feed length X-axis: 2,120 mm, feed length Y-axis: 250 mm, feed length Z-axis: 150 mm, type of input current: AC, grinding wheel diameter: 250 mm, overall weight: 3,730 kg, grinding length: 280 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 2,600 rpm, center height in crank: 115 mm, center height: 115 mm, collet bore: 55 mm, grinding spindle speed: 2,600 rpm, feed rate X-axis: 12 m/min, pivoting range: 45 °, travel distance X-axis: 2,120 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 150 mm, center width: 280 mm, grinding spindle motor power: 3,000 W, table length: 2,800 mm, table width: 250 mm, power: 6.5 kW (8.84 HP), height adjustment type: mechanical, workpiece diameter (max.): 235 mm, grinding diameter: 250 mm, input frequency: 50 Hz, disc diameter: 250 mm, input voltage: 380 V, space requirement width: 1,440 mm, space requirement length: 2,580 mm, space requirement height: 1,520 mm, grinding wheel speed: 2,100 rpm, distance table to spindle center: 362 mm, tool diameter: 235 mm, workpiece length between centers: 280 mm, distance between centers: 280 mm, Hob Sharpening Machine 33C (ZZS) 3A662 (Gear hobbing cutter grinding machine) The 33C (ZZS) model 3A662 is a specialized hob sharpening machine designed for precise sharpening and regrinding of gear hobs and gear cutting tools. Manufactured by 33C (Soviet Union), this machine is intended for industrial tool rooms and gear manufacturing facilities requiring reliable accuracy and repeatable grinding quality. The machine is suitable for sharpening hobs with a maximum diameter of 235 mm and a maximum length of 280 mm. It supports hobs with 4 to 30 flutes and allows grinding of straight and helical flutes with a helix angle range from 0° to 45°, covering a wide range of gear cutting applications. The grinding spindle is designed for grinding wheels with diameters from 200 to 250 mm. Spindle speed is adjusted via step pulleys and offers four speed stages: 1500 / 1900 / 2100 / 2600 rpm, ensuring flexibility for different tool sizes and materials. The machine is equipped with a dividing mechanism and supplied with a complete set of change gears, allowing accurate indexing during the sharpening process. A hydraulically driven table provides smooth longitudinal movement and stable grinding conditions. With overall dimensions of approximately 2580 × 1440 × 1520 mm and a machine weight of about 3730 kg, the 3A662 features a rigid and robust construction, providing excellent vibration damping and long-term operational stability. The machine operates on three-phase AC power (380 V / 50 Hz) and is supplied with original factory documentation. Key Features: *Specialized hob sharpening machine *Max. hob diameter: 235 mm *Max. hob length: 280 mm *Number of flutes: 4 – 30 Hsdpjx Nprbefx Adweng *Helix angle range: 0° – 45° *Grinding wheel diameter: 200 – 250 mm *Grinding spindle speeds: 1500 / 1900 / 2100 / 2600 rpm *Hydraulically driven table *Dividing mechanism with full set of change gears *Rigid industrial construction (approx. 3730 kg) *Original technical passport and manual (Russian) Typical Applications: *Sharpening and regrinding of gear hobs *Maintenance of gear cutting tools *Tool room operations in gear manufacturing *Repair and refurbishment of worn hobs *Small- and medium-series gear production support

Condition: used, Year of construction: 1993, Automatic Aerosol filling and crimping machine. Spray bottle equipment. Cycle = Blowing / Product filling / Valve installation / Valve crimping / Gas filling / Pressure control / Pump installation / Cover installation – Aerosol 30 ml – Current format: 30 ml filling on bottles d.43 x h.86 mm, valve neck 20 mm – Dosing with Hibar pumps HDB-2B-CV – Cap / cover installation – RNA bowl feeding valves + caps – Double index – Capacity: approx. 70 units / minute – year 1993 – Continuous control by PLC– 18 position tray + technical file available on request – Plan entry/exit conveyor belt Perfect line for all pump spray product. Hedpfxox Rz Nze Adweng

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Hnedpfsxllcljx Adwjg

Condition: used, mileage: 32,510 km, power: 390 kW (530.25 HP), first registration: 11/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2025, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), navigation system, parking heater, FT XF 530 NGD PXP All-Wheel Drive Chassis front design: Floor plate Main mirrors LED daytime running lights Rigid cab entry Air-suspended cab Sleeper High Cab Two LED spotlights for cab rear wall Headlamp washers Signal horns, 2 sets LED skylights, additional LED lights on cab roof, pre-installed Rear-view camera, pre-installed DAF Corner View LED headlamps and fog lights Cab interior trim: Hexagon Cabin wall trim: textile Driver-side roller blind Dashboard table Dashboard design: Vision Auxiliary heater with waste heat pump and timer Electric window lifters Pollen filter Hnsdpfx Aoxitmgodwog Driver’s seat, fixed pedestal Color scheme of interior trim: luxury Passenger seat, fixed pedestal Central storage compartment Leather steering wheel Electrically operated roof hatch Driver’s seat: Luxury Air Passenger seat: Cinema & Table, fabric upholstery Door panels: loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Automatic cab climate control Safety nets on both bunks Curtains with partition curtain Refrigerator and drawer Armrests on both sides of driver’s seat Accessory power supply: standard + 2x 40 A LED interior lighting: luxury ECAS remote control with extended functions Adaptive Cruise Control with FCW and AEBS-3 DAF Connect Driver Performance Assistant Wireless charger Digital tachograph, VDO 1C, version G2V2 Toll system preparation Speed limiter setting: 90 km/h FMS connector, extended and pre-installed DAF Infotainment Luxury Plus, exclusive speakers Antennas: DAB-ready radio, 2x mobile, GNSS-extra: CB Electronic Stability Control (VSC) Alcohol interlock, pre-installed Lane change warning system Reversing warning device Turn assist system Main chassis switch Stabilink rear axle suspension Front leaf suspension: standard One ride height position, standard height Front axle 1, 8,000 kg, load index 156 Rear axle load capacity 13.00 t Axle load monitoring Front: 8.00 t, parabolic, 183N Rear: Air suspension SR1347 Rear axle 1, 13,000 kg, load index 149 Tire pressure monitoring system Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 Alcoa Dura-Bright aluminium wheels 32 mm F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB Maneuvering mode Automated transmission, TraXon, 12 gears Automated transmission with manual shift – full version ASR (traction control) Emission class Euro 6 Off-road use with rocking function Eco performance Rear axle ratio 2.69 Mechanical differential lock 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Compressor 2-cylinder, without clutch Driven rear axle with disc brakes Pneumatic parking brake control ZF Intarder Front underrun protection Left fuel tank Side members 260/6.0 mm, without internal reinforcement 620 l aluminium left fuel tank, height 620 mm Access step walkway left LED work lights Wheelbase 3.80 m / rear overhang 0.99 m Right chassis side clear, 1700 mm Long walkway with step Aluminium air tank LED tail lights Exhaust pipe vertical, high EAS unit right, vertical + 80 l AdBlue fender left Kingpin diameter 2 inch Operation of fixed (non-sliding) fifth wheel Pneumatic connection for trailer, turntable coupling Fifth wheel mounting dimension 670 mm SAF S36-20, cast iron, 185+40mm, low maintenance Electrical connection trailer 24V/15-pin cable: 15-pin + EBS Body connector on chassis Chassis prepared with hydraulic...

Condition: excellent (used), Year of construction: 2003, CNC machining center MORI SEIKI NH 5000/40 2003 Technical data: x-travel 630 mm y-travel 600 mm Hedpfx Adovuql Uowong z-travel 670 mm Tool holder BT 40 Spindle speeds - continuously variable 14000 rpm Pallet change with rotary indexing table 360x1 degree 2 Max. workpiece weight 500 kg Tool change device 60-way Table size 500 x 500 mm Total power requirement 56 kW

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] Hnedpfxjyacvte Adweg - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 30788 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information. Hnedpfx Ajx Imt Hjdweg Application Types Measuring

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Hnodpfx Ajxk T Igodwsg

Condition: used, mileage: 37,978 km, power: 330 kW (448.67 HP), first registration: 03/2024, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 03/2026, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, tail-lift, FA XDC 450 CRYSTAL WHITE Equipment: Drivetrain: - Off-road operation with rocking mode - Maneuvering mode - Emissions standard Euro 6 - ECO power - Automatic idle shutdown, 5 minutes - Automated TraXon transmission, 12-speed - Manual shifting, full version - Rear axle ratio: 2.71 - Mechanical differential lock - Traction control (ASR) - 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 - MX-11 engine, 330 kW/449 hp, cab emblem: 450 Cab, Interior: - Left-hand drive - Leather steering wheel - Black seatbelts - Electrically operated roof hatch - Driver’s seat: Luxury Air - Passenger seat: 'Kino', fabric upholstery - Driver’s seat, fixed base - Door trim: loosely woven fabric - Interior trim color: Luxury - Cab interior trim: Hexagon - Cab wall lining: textile - Passenger seat, fixed base - Automatic climate control and air conditioning - Armrests on both sides of the driver’s seat - Center storage compartment - Driver’s side roller blind - Dashboard table - Interior lighting - ECAS remote control with extended functions - Waste heat pump Chassis: - Wheelbase 4.00 m / rear overhang 1.70 m - Standard component layout - Steel air reservoir - Fuel tank left side - Taillights with bulbs - Exhaust pipe horizontal, low - EAS unit right, hor. + 45-l AdBlue tank left - 340-l aluminum fuel tank left, height 620 mm Operating Conditions: - Maximum ambient temperature 38°C - Front air intake - Dust shield - Heated fuel pre-filter Body and Body Preparation: Trailer Equipment: - Operation with drawbar, type plate, up to max. GCW - Pneumatic connection for trailer, swivel coupling - Cross member D200 + Rockinger coupling D200 - Electrical connection for trailer, 24 V/15-pin Paint: - Chassis color: Anthracite Grey - Cab color: E1980 Crystal White - Headlamp frame color: Crystal White - Bumper color: Grey - Lower cab step: Stone Grey - Mirror housing: black for Crystal White cab Gross Weight and Gross Combination Weight: - Technically permissible GVW chassis: max. 19,500 kg - Max. GCVW drive axle: 44,000 kg, class 2 - Max. GCW drawbar/coupling: 80,000 kg PTO: - First gearbox PTO NH/4c-R-27/30 Hnedpfx Adjxxfuzewjg Cab Exterior: - Front chassis design: robust - Mechanical cab suspension - Main mirrors - Central locking - Windshield with sun protection film - Rear window: double-glazed - Flexible cab step - Two LED headlights for rear cab wall - Headlamp beam pattern for right-hand traffic - DAF Corner View - Handle and covers: black, side trim: cab color - LED headlights and fog lights Braking System: - 2-cylinder compressor without clutch - Driven rear axle with disc brakes - Parking brake assistant - Pneumatic control for parking brake - MX engine brake Suspension and Axles: - Rear axle capacity: 13.00 t - Front leaf suspension, extra high - Single ride height position, standard height - Front: 8.00 t, parabolic, 167 N - Rear: air suspension SR1344 - Front axle 1: 8,000 kg, load index 156 - Rear axle 1: 11,600 kg, load index 145 Wheels and Tires: - Front axle(s): 315/80 R22.5 - Driven rear axle(s): 315/80 R22.5 - Steel disc wheels, silver grey Safety and Protection: - Reverse warning system - Lane departure warning system - Turn assist, prepared - Electronic Stability Control (ESC) - Standard immobilizer Communication and Driving Management: - Wireless charger - Adaptive cruise control

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] Hodpeyacvmofx Adwsng END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 32783 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional Hodpfjxizb Esx Adwjng ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: used, mileage: 15,848 km, power: 355 kW (482.67 HP), first registration: 04/2025, fuel type: diesel, next inspection (TÜV): 04/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FAN XF 480 NGD CRYSTAL WHITE Sleeper High Cab Laminated glass with sun protection film Central locking, 3 keys, 2 remote controls Windshield with sun protection film Rear window: Double glazed Horns, 1 set LED skylights DAF Corner View LED headlights and fog lights Mechanical cab suspension Rear view camera Handle and lamp surround: Black. Side panels: Cab color LED daytime running lights Adjustable short roof spoiler, Sleeper High Cab Black spoiler housing for cab suspension Crystal White CRYSTAL WHITE Lower cab step: Stone Grey Roof hatch with electric controls Integrated parking air conditioner Driver's seat: Luxury Air Passenger seat: Cinema and/or table, fabric upholstery Door panel: Loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Safety net on both bunks Refrigerator and drawer Armrests on both sides of the driver's seat Dashboard design: Plateau Accessory power supply: Standard 2x 40 A ECAS remote control with extended functions Parking heater with waste heat pump and timer Wireless charger Digital tachograph, VDO 1C, version G2V2 Antennas: Radio, 2x mobile radio, GNSS. Extra: CB DAF Infotainment Luxury with Exclusive speakers Adaptive Cruise Control with FCW and AEBS-3 Predictive Cruise Control Driver Performance Assistant Lane Departure Warning System Start-Off Assistant DAF Side and Turn Assist Electronic Stability Control (VSC) Speed Limit Detection DAF Drowsiness Detection Compliant with UN regulations R155 and R156 Alcohol interlock, ready Axle load monitoring Front leaf spring suspension: medium Front: 8.00 t, parabolic, 165 N Rear axle 2, 8000 kg, load index 156 Rear axle load capacity 13.00 t Trailing axle load 8.0 t Load limiter 11.5 t Hand-operated lifting device Lifting device Rear: 20.00 t, air suspension, SR1344 Front axle 1, 8,000 kg, load index 156 Hedpfxewg Npuo Adwong Rear axle 1, 11,600 kg, load index 145 Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 2nd driven rear/trailing axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA Tire pressure monitoring system ECO performance Rear axle ratio 2.64 Mechanical differential lock Traction assist 15.0 t 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 MX-13 engine, 355 kW/483 hp Cab emblem: 480 Emission class Euro 6 Maneuvering mode Automated transmission, TraXon, 12 gears Automatic transmission with manual transmission, full version Traction control (ASR) OBD-E Engine H6 Fuel B7 ZF Intarder 2-cylinder compressor without clutch Rear drive axle with disc brakes Pneumatic parking brake control EAS unit right, horizontal, 75 l fuel tank left Longitudinal member 310/7.0 mm, with internal reinforcement front/rear 620 l aluminum fuel tank right, height 620 mm Front underride protection Steel compressed air tank Cross member D137 Rockinger coupling D130 Use with drawbar, type plate, up to max. GVW Pneumatic connection for trailer, swivel coupling Electrical connection for trailer, 24 V/15-pin Plug connection for fixed engine speed control on chassis Hard-wired body signals and warnings ECAS control PTO engine rear, 1 o'clock, control without clutch, pump drive Battery energy monitoring Generator 130 A, batteries 2 x 210 Ah AGM Technically permissible chassis weight max. 27,000 kg Max. gross combination weight of drive train 50,000 kg Class 3 Max. GVW drawbar/coupling 53,000 kg Additional

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] Hedjyacvgopfx Adwjng - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 31941 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: excellent (used), Professional face mill from the renowned brand GARANT (Hoffmann Group), designed for high-performance machining. Overall diameter: 210 mm Mounting bore: 60 mm Equipped with indexable inserts – easy handling, suitable for heavy-duty industrial conditions. In very good condition, the tool is ready for use. An ideal choice for machining centers and industrial milling machines. Hjdpfx Adow Sav Usweng

Condition: used, mileage: 35,002 km, power: 390 kW (530.25 HP), first registration: 11/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2024, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, EQUIPMENT: * Day Cab * Heavy-duty front chassis design * Mechanical cab suspension * External sun visor * Flexible cab entry steps * Signal horns, 1 set * LED headlights and fog lights * Headlight beam pattern for right-hand traffic * Two LED work lights at rear cab panel * Rotating beacons on cab front, prepared * Handrail & surrounds: black, side panels: cab colour * Windscreen with sun protection film * DAF Corner View system * Central locking, 3 keys, 2 remote controls * Leather steering wheel * Interior trim: luxury specification * Driver's seat: Luxury Air Suspension * Armrests on both sides of driver’s seat * Passenger seat: Cinema style with fabric cover * Dashboard table * Central storage compartment * Refrigerator or cool box * Curtains, without partition curtain * LED interior lighting * Automatic cab climate control * Stationary/heater with waste heat pump and timer * Roller blind driver's side * Electric roof hatch * FMS connector, extended and prepped * DAF Connect telematics * Digital tachograph, VDO 1C, Version G2V1 * DAF Infotainment Luxury Plus, Luxury speakers * Antennas: DAB-prep. Radio, 2x Mobile phone, GNSS extra: CB * Adaptive Cruise Control with FCW and AEBS-3 * Lane Departure Warning System * Electronic Stability Control (VSC) * Reversing alarm * Standard immobilizer Hnsdpem Nhx Sofx Adweg * Front: 8.00 t, parabolic, 167N * Front axle 1, 8,000 kg, Load index 156 * Rear suspension 21.0 t / Brakes 21.0 t * Rear axle capacity 10.50 t 10.50 t * Rear: 21.00 t, trapezoidal, HR1670T * Rear axle 1, 12,600 kg, Load index 148 * Extra-high parabolic front springs * Front axle(s): 385/65R22.5 * Driven rear axle(s): 315/80 R22.5 * Goodyear * Steel disc wheels, silver-grey * Silver-grey wheel trims * MX-13 engine, 390 kW / 530 HP, cab emblem: 530 * Emissions class Euro 6 * ECO performance * Engine idle shutdown, 5 min * Automated transmission, TraXon, 12-speed * 12-speed TraXon gearbox 12TX2610 OD, 12.92–0.77 * Maneuvering mode * Full spec automated transmission with manual mode * Off-road mode with rocking/free movement function * Rear axle ratio 3.61 * Mechanical differential lock * ASR (traction control) * ZF Intarder * Pneumatic control for parking brake * Spring brake actuators, first front axle * Spring brake actuators, tandem rear axles 1 and 2 * Parking brake assistant * 2-cylinder compressor without clutch * Rear drive axle with drum brakes * Wheelbase 4.05 m / rear overhang 1.50 m, tipper * EAS unit right, vertical t. 45-l AdBlue tank left * Steel air reservoirs * 340-litre aluminium fuel tank left, 505 mm high * Splash guards * Cross member D200, Ringfeder coupling D200 * Pneumatic trailer coupling, turning head * Electrical trailer connection, 24V/15-pin cable: 15-pin EBS * CAN J1939 functions at body builder socket * First gearbox PTO NH/4c-R-27/30 * 110 A alternator, batteries 2x 230 Ah * Permissible chassis weight 2000 kg * Max. gross train weight drive config. 58,000 kg, class 2 * Heated fuel pre-filter * Dust shield * Plus Warranty Driveline – 3 years/200,000 km from first registration * CB radio * Rear-view camera * Wind deflector * Light Fix lamp bar BODY - MEILLER TRIGENIUS D316 - Front bulkhead raised by approx. 200 mm, permanently welded, with splash guard adapted to available space - Left sidewall Bordmatik (1 Bordmatik cylinder) - Swinging right side wall with manual claw lock - Swinging rear wall with automatic cam lock - Side walls with s...

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] Hodpfxoyacvao Adwjng GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 44456 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, mileage: 4,83,726 km, power: 355 kW (482.67 HP), first registration: 04/2022, fuel type: diesel, overall weight: 1,800 kg, next inspection (TÜV): 04/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SC LD Technically permissible maximum chassis weight: 19,500 kg Headlight beams for right-hand traffic Electric trailer connection 24V/15-pin cable: 15-pin + EBS Alternator 80 A, batteries 2x 230 Ah Maximum ambient temperature: 38°C Antennas: AM/FM, 2x mobile, GNSS Mechanical cab suspension Type plate: Standard (EC) Idle shutdown automatic, 5 minutes 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 OBD, Euro VI Step E Auxiliary heater with waste heat pump and timer Automated gearbox with manual mode – full version Front axle(s): 315/60R22.5 Kingpin diameter: 2 inches Rear: 11.5 t, air suspension, SR1344 Halogen headlights with height adjustment Emissions standard Euro 6 Top air intake Max. permissible combined weight (driven axle): 50,000 kg, Class 3 Traction control (ASR) Space Cab – driver cabin Aluminum fuel tank 400 l, height 580 mm Driven rear axle(s): 295/60R22.5 Drive rear axle with disc brakes Parking brake with test position Front underrun protection Convex main mirror Pneumatic trailer connection, swivel coupling Exhaust pipe horizontal, low Body power socket at cab front Cold foam mattress for lower bunk LED work lights AdBlue® tank 90 l Automated gearbox, TraXon, 12 speeds Eco-Fuel Interior trim color: Dark Sand DAF Connect Passenger seat: Basic Curtains, no partition curtain Fuel tank left Adaptive Cruise Control with FCW and AEBS-3 Front axle 1: 7,500 kg, load index 154 Type approval for complete vehicles (WVTA) Rear axle 1: 11,500 kg, load index 145 Steel air reservoirs Cab, interior decor Delta black Safety nets on both bunks Door trim: loosely woven fabric Soft-touch steering wheel, black Rear axle ratio: 2.05 EAS unit right, Low Deck Electronic Stability Control (VSC) Driver seat armrest Glass roof hatch, electric operation Operation of non-sliding fifth wheel Fog lights Lane Departure Warning System Electric windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS interface Driver Performance Assistant Storage compartment for trailer connections CO2 indicator: Y Central locking Longitudinal frame members 260/7.0 mm, with front internal reinforcement Lower side cover, cab step and fender grey Upper bunk Reverse warning system MX-13 engine, 355kW/483HP, cab badge: 480 ZF Intarder Front: 8.00 t, air suspension, 161 N Horizontal battery box and spare wheel holder right Fifth wheel lead: 670 mm Adjustable roof spoiler for Space Cab JOST JSK37ME, cast iron, 140 mm, D126-15t Wheelbase 3.80 m / rear overhang 0.87 m Cool box or refrigerator Chassis protection bar Alcoa aluminum wheels, brushed, 32 mm Speed limiter setting: 85 km/h Automatic cab climate control Predictive Cruise Control Radio/USB player, two speakers Truck phone ECAS remote control with advanced functions Driver’s seat: Luxury Air Hnjdpexthpqjfx Adwog Blind spot camera All information without guarantee. Subject to errors and prior sale.

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 44449 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer Hjdpfxsyacu No Adweng

Condition: used, mileage: 4,57,128 km, power: 355 kW (482.67 HP), first registration: 12/2021, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, FT XF 480 SSC BRILLIANT WHITE Electrical connection trailer 24V/15-pin cable: 15-pin EBS H3279/1 Brilliant White Automatic idle shutdown, 5 minutes 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 OBD, Euro VI Step E Auxiliary heater with waste heat pump and timer Front: 8.00 t, parabolic, 163 N Automatic. Full-size manual transmission Driven rear axle(s): 315/70 R22.5 Rear: 13.00 t, air suspension, SR1344 Traction control (ASR) Driven rear axle with disc brakes Convex main mirror LED worklight 90 l AdBlue® tank, on the left fender TraXon automated transmission, 12-speed Eco-Fuel Interior trim color: Dark Sand DAF Connect Passenger seat: Basic Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Rear axle 1, 13,000 kg, load index 149 Luxury speaker system with 6 speakers Soft-touch steering wheel, black Electronic Stability Control (VSC) Armrest Driver's seat Lane change warning system Electric windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Central locking Antennas: AM/FM, 2x mobile radio, GNSS Extra: CB Analog control for gearbox next door, no 1st gearbox next door Outside sun visor, green, translucent Air-suspended cab Jost JSK37CW, cast iron, low-maintenance, 150 12 mm MX-13 engine, 355 kW/483 hp Cab emblem: 480 Super Space Cab Turn assist ZF Intarder LED headlights Front axle(s): 385/55R22.5 Batteries in the rear Overhang, no spare wheel holder. LED taillights Prepared for compressed air system Aluminum fuel tanks 845, 430 l, step, height 620 mm Euro 6 emission class Fixed roof spoiler for Super Space Cab Side paneling Wheelbase 3.80 m / rear overhang 0.99 m Side fenders Coolbox or refrigerator Hsdpfxoww R D Ie Adwong Skylights Xtra Comfort mattress for lower bunk Automatic cab climate control DAF Night Lock Heated fuel pre-filter Truck phone ECAS remote control with advanced functions Driver's seat: Luxury Air Analog body signals and warnings Rear axle ratio 2.38 Tire pressure monitoring system Battery energy monitoring Lower bunk with drawer, 65 liters Fog lights and Cornering lights F1.385/55R22.5GO R1.315/70R22.5GO Parking air conditioning, roof variant, Bycool Slimcool Lift axle switch

Condition: used, TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Max. machining length : 190 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 15000 [rpm] - Spindle power : 4 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 3 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] - Live tools power : 1 [kW] END ATTACHMENT Hodpfoyacu Aox Adwsng - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] - Live tools power : 0.75 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2170 X 1140 [mm] - Machine height : 1890 [mm] - Machine weight : 2800 [kg] MACHINE HOURS - Number of hours under power : 48838 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11,S21,S51 - Rotating guide bush - Parts catcher - Ejection of workpiece - Parts conveying strip - Chips conveyor - Coolant tank : KNOLL * with high-pressure pump * with paper filtering unit - Bar loader : TORNOS SBF326-3.2M - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, mileage: 6,28,277 km, power: 390 kW (530.25 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 3 axles, color: black, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, FAT XF 530 SSC DEEP BLACK (46185) Riedler stake body Penz timber crane 15Z9.50 H1/B4 Grapple with chainsaw Central locking Electrical connection for trailer, 24 V/15-pin Rear axle 1: 315/80R22.5 Front mirror Automatic idle shutdown, 5 minutes Hodsxc R S Hepfx Adwjng Rear: 2 x 13.00 t, air suspension, SR1360T Parking heater with waste heat pump and timer Basic immobilizer Traction control (ASR) Rear suspension 26.0 t / Brakes 26.0 t Rear axle 2: 315/80R22.5g Spring-actuated brake chamber, first front axle Drive rear axle with disc brakes Interior trim color: Dark Sand Cab interior finishing: Piano Black Passenger seat: Basic Luxury sound system with 6 speakers Steel air tanks Adaptive cruise control with FCW and AEBS Electronic Stability Control (VSC) Driver’s seat armrest Glass sunroof, electric operation Lane departure warning system Electric windows Pollen filter Mechanical differential lock LED daytime running lights Universal FMS connector Driver Performance Assistant Upper sleeper bunk Exterior sun visor, green transparent Air-suspended cab MX-13 engine, 390 kW / 530 hp Cab emblem: 530 Reverse warning system Cab - Super Space Cab MX engine brake and ZF Intarder Auxiliary power supply: 12V/20A, 24V/2x15A + 2x40A Rear axle ratio 3.40 LED headlights LED rear lights Front axle 1: 385/65R22.5 16-speed manual transmission 16S25.. OD, 13.80-0.84 Emission class Euro 6 Front: 9.00 t, parabolic, standard, 183N Second transmission PTO NL/1b-Z Wheelbase 5.55 m / rear overhang 3.75 m Spring brake chamber on rear axle 1 & 2 First transmission PTO N.../10c-O-37/30 Cool box or refrigerator Skylights Xtra Comfort mattress, lower bunk Automatic cab climate control AdBlue tank 75 liters, left chassis side Truck phone ECAS remote control with extended functions Navigation preparation Driver’s seat: Luxury Air Analog superstructure signals and warnings Front axle 1, 9000 kg, load index 160 Axle load monitoring Steering wheel, leather, color black CAN J1939 functions in the body interface Lower sleeper bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Fog lights and cornering/turning lights R1, 315/80R22.5 R2, 315/80R22.5 SP, 315/80R22.5 F1, 385/65R22.5 Tank 750 L, left 2 rotating beacons on light bar 4 Hella roof spotlights Bycool compressor parking cooler, rear-mounted Light-Fix bar SSC E6 Switch in cab for constant power to truck reverse light Steering axle lock switch (trailer) Lift axle switch (trailer) Compressed air gun with cab mounting CB radio, 40 channel XXL storage table XF Euro6 Marlen

Condition: used, mileage: 4,78,000 km, power: 355 kW (482.67 HP), first registration: 02/2023, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XG 480 SAPPHIRE BLUE (CG258) Wheelbase 4.00 m / Rear overhang 0.99 m Rear: Air suspension SR1344 Pneumatic control for parking brake XG cab JOST JSK42, cast iron, 150 + 12 mm Armrests on both sides of the driver’s seat Rear axle load capacity 13.00 t 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 LED skylights Dashboard design: flat Front suspension: standard leaf spring Interior trim color: Exclusive Additional cab insulation Parking heater with heat pump and timer Cab interior trim: Hexagon Front: 8.00 t, parabolic, 163N LED interior lighting Dashboard table Automated gearbox with manual override – full version Digital tachograph, VDO 1C, version G2V1 Fifth wheel pin diameter 2 inches Stabilink rear axle suspension Driven rear axle(s): 315/70 R22.5 Emission class Euro 6 ASR traction control Driven rear axle with disc brakes Catwalk with step, standard Catwalk step, left Work lights, LED Automated gearbox, TraXon, 12 gears ECO performance Heated fuel pre-filter DAF Connect Rear axle ratio 2.38 Fuel tanks left and right Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load index 149 Hjdpfx Aoxpzq Hjdwjng Safety net on both bunks Door trim: loosely woven fabric Cab wall trim textile Electronic Stability Control (ESC) Lane departure warning system Electric windows Pollen filter LED daytime running lights Driver Performance Assistant CO2 display: Y R1, 315/70R22.5 F1, 385/55R22.5 Adjustable roof spoiler for XG cab Central locking Alternator 110 A, batteries 2 x 210 Ah AGM LED headlights and fog lights Electrical trailer connection 24V/15-pin cable: 15-pin + EBS ks: 765 step left + 430 right, H 620 mm Antenna: DAB prep. radio, 2x mobile phone, GNSS extra: CB Upper bunk Analog control gearbox PTO, no 1st gearbox PTO Side skirts with extensions at underside Cab air suspension Headlamp washer Reversing warning system MX-13 engine, 355kW/483HP cab badge: 480 DAF Corner View DAF Infotainment Luxury Plus, Luxury speakers Two LED headlights for cab rear wall Turning assistant ZF intarder Passenger seat, swivel base Steering wheel, leather Mechanical differential lock Auxiliary power supply: standard + 2x 40 A Xtra Comfort mattress for lower bunk Front axle(s): 385/55R22.5 Headlight trim color: cab color Bumper color: cab color Rear lights with LEDs External sun visor Preparation for air tool Parking brake assistant Refrigerator and drawer Cab color roof spoiler Side fender color: cab color SAPPHIRE BLUE (CG258) Curtains with separating curtain Storage compartment with drawer in center console Automatic cab climate control Lower cab step in cab color ECAS remote control with extended functions Driver’s seat: Super Air Passenger seat: Comfort Air Battery energy monitoring Aluminum air tanks Signal horns, 2 sets Side skirt color: cab color Stationary air conditioning, NGD DAF Cool Ultimate top cover stationary aircon NGD paint finish All information without guarantee. Subject to errors and prior sale.