Used Indexers for sale (1,199)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment Njdew I Uy Topfx Agfedd 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2001, Edge thickness 0.2 - 6 mm Workpiece dimensions Width min. 70 mm Height min. / max. 8 / 42 mm Length min. 150 mm (strip edges) Feed speed: 12 m/min Glue application roller Machine dimensions L x W x H = 3500 x 900 - 1300 x 1250 mm Weight: approx. 1130 kg Power consumption: approx. 6.0 kW, 400 V, 50 Hz Equipment: - Double top pressure with manual height adjustment - Automatic magazine for roll edges up to 800 mm DM - Rapid heating tank with application roller in synchronous and counter-rotating direction - Pneumatic adjustment and resetting of all work units - Pneumatic cross-cutting shears for strip edges up to 3 mm - Manually adjustable infeed ruler - Double cross-cut saw 2 HF motors 0.2 kW, 12,000 n 2 automatic Positions = 0 + 3 degrees - Milling/flush trimming unit with two HF motors 0.43 kW, 12,000 n. Two-sided scanning with two HF indexable cutter heads. Radius scraper, automatically controlled. Flat scraper, automatically controlled. Storage location: Nattheim Nsdpjvvkfqjfx Agfsdd

Condition: ready for operation (used), Year of construction: 2007, General Data Measurements width 2400 mm Measurements depth 2800 mm Measurements height 2800 mm Machine weight 5000 kg Main Drive Spindle speed range up to 10000 or 12000 Tool taper BT40 or CAT40 Movement X-Axis Movement 1067 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 1500 kg Ndsdpfxsxu Rxdo Agfjd Tools Number of index 24 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VMX42 vertical machining center was manufactured in 2007. It features a robust table size of 1,270 × 610 mm, supporting a maximum load of 1,500 kg. Equipped with a high-speed spindle capable of up to 12,000 rpm and a BT40 taper, it ensures efficient machining. The machine includes a 24-tool automatic changer and rapid traverse rates of 24 m/min. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1999, Working area 4000 x 1500 mm Max pressure 30 ton No. of stations in turret 21 pcs. No. of indexing tool stations 10 pcs. Max. material thickness 8 mm Max. sheet size 3061 x 1528 m Max. punch dia. 89 mm Control: Siemens Sinumeric 840 D Ndsdpfjxyiw Aox Agfjd Equipped with: 4 threading stations Automatic loading/unloading system

Year of construction: 2006, condition: used, functionality: fully functional, machine/vehicle number: E22SE06122086272, This listing is for a Rational SCC 202 Index E electric combi-steamer from the premium manufacturer Rational. The combi-steamer is the XXL format and offers capacity for 20x2/1 GN or 40x1/1 GN containers. The unit was manufactured in 2006 and has undergone a major inspection in our in-house workshop. As a precaution, both heating elements in the cooking chamber were replaced, and the unit is fully functional. The combi-steamer will be available from calendar week 49. Ndedpfx Aexykb Aegfsd You will receive an invoice with VAT stated. Our used equipment service for you: - 3-month warranty on all electrical parts - High-quality branded equipment at fair prices - Professional refurbishment / inspection and expert cleaning - Tested and fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 This combi-steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the unit independently determines the ideal cooking path for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing), as well as the size, loading amount, and product-specific requirements. Technical data: Dimensions (W x D x H): approx. 1084 x 996 x 1782 mm Minimum door opening dimensions for delivery (WxH): 1145 x 1900 mm Power supply: V: 400 / kW: 62 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SE06122086272 Year of manufacture: 2006 Condition: used, major inspection carried out, fully functional Additional features: - 100% hygienic fresh steam from steam generator - Intelligent cooking: the SelfCookingCenter 101 covers 95% of all common cooking applications - Simple operation for everyone, including unskilled staff - SelfCooking Control® – with 9 applications: large roasts, pan-fried items, poultry, fish, side dishes, potato products, egg dishes/desserts, baking, finishing® - Cockpit – Graphic overview of the current cooking chamber climate, expected course of cooking, history and preview, as well as end-of-cooking options - Combi-steamer mode with the following operating modes: steam 30-130 °C, hot air 30-300 °C, combination of steam and hot air 30-300 °C, finishing® - ClimaPlus Control® – precise percentage humidity measurement, 5-step adjustment and control - Manual steaming - Low temperature and overnight cooking - Central control dial with "push" function - Hand shower with automatic retraction - Core temperature probe - Cool-down function for rapid and safe chamber cooling - Halogen chamber lighting - Removable, easy-to-replace door gasket - Double glazing, swing-out for easy cleaning - Operating and warning indicators, e.g. for water shortage Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have questions, need advice, or want to inspect the item locally? You can reach us by telephone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460043, Technical specifications: # Machining workspace: X 300 mm; Y 500(725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis A (rotary table) and 2 rotary axes B (indexing divider head) with direct angular measurement system, max. rotational speed 50 rpm, accuracy ± 5" # Max. clamping/part size: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse speeds: X/Y/Z – 65/75/75 m/min; positioning accuracy Tp: 0.008 mm # Spindle center distance: 300 mm # Spindle speed: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2 x 32 tool positions / chip-to-chip average 2.5 sec # Maximum tool size: Ø75 mm / length max. 275 mm / 7.5 kg Electrical connection: # Voltage: 3x400V / 50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation area: approx. 3.6 x 6 x 3.7 m Ndjdpfxoxwvr Io Agfsd # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # Oil filtration system max. 80 bar: Knoll 550 K-1 450_2450 (can serve two machines simultaneously) # Cooling system for spindle, guideways, and control cabinet # 2 oil lubrication systems # Oil vapor extraction/recovery unit: IFS Vario E2000 (2,000 m³/h) # Fire suppression: Kraft & Bauer # Part presence detection: pneumatic detectors (low pressure) # In-process measurement: Marposs T25 # Tool breakage monitoring and length check: inductive sensor # Tool holder detection in spindle # Documentation: operating manuals only Machine condition: Operational / In production

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 2,000 kg, GF AgieCharmilles FORM 3000 Year of manufacture: 2008 C-type design, fixed table with lowering tank Travels (X/Y/Z): 600 x 400 x 500 mm Distance table to ram: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) ISPG generator with 60 Amps Best achievable surface finish Ra 0.10 µm AGIEVISION 5 operating interface 15” color LCD monitor, mouse or touchscreen, membrane keyboard, and manual control Including CAPA electrode changer: - 60 electrode positions Njdjxx Uqfopfx Agfjdd - 4 pallet positions Net weight of the system: 5900 kg Machine dimensions: 1790 x 2790 x 3110 mm The machine has already been cleaned, serviced, and thoroughly tested. We would be pleased to invite you for an inspection and test erosion. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, center height: 175 mm, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 Ndsdpfjxywhpex Agfed TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table x1 rotating wheel dressing unit (electrical) x1 3-jaw chuck Ø170 [mm] - MT5 x1 4-jaw chuck Ø170 [mm] - MT5 x1 magnetic chuck Ø170 [mm] - MT5 x1 2-point steady rest x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) More information upon request.

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2400 mm Measurements depth 2800 mm Measurements height 2800 mm Machine weight 5000 kg Main Drive Spindle speed range 12000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 1,067 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 610 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Ndjdpfsxu Rxkjx Agfed Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 1500 kg Tools Number of index 24 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VMX42i was manufactured in 2013. It features a robust table size of 1,270 × 610 mm with a maximum load of 1,500 kg. The spindle can reach speeds up to 12,000 rpm, supported by a 15 kW motor. It includes an automatic tool changer with a capacity for 24 tools. Ideal for high precision tasks, it also offers rapid traverse rates of 24 m/min. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2010, functionality: fully functional, CNC Lathe GILDEMEISTER DMG MSL 60/7 – Year of Manufacture 2010 Equipped with SIEMENS 840D Powerline Control & Comprehensive Automation Package The GILDEMEISTER DMG MSL 60/7 offered here is a precise, robust, and reliable CNC lathe designed for industrial applications in both series and single-part production. Thanks to high-quality components, powerful main and counter spindles, as well as state-of-the-art CNC control, this machine is ideal for demanding machining operations in the metalworking and supply industries. With an integrated bar feeder magazine, C-axis, coolant system, and chip conveyor, this machine set delivers high productivity with fully automated machining processes. Technical Specifications Spindle bore: 65 mm Bar capacity: 60 mm Max. main spindle speed: 5,000 rpm Counter spindle: present, 5,000 rpm C-axis: available, for milling and indexing operations Ndedpfx Agexxi Niefod Machine weight: approx. 3,500 kg Equipment & Accessories ✔ IEMCA Bar Feeder Magazine Master 880/33 HF – For bar lengths up to max. 3,200 mm – Ideal for automated 24/7 series production ✔ KSS Coolant Supply / Cooling Unit – Optimum cooling and extended tool life ✔ Hinged Belt Chip Conveyor – Efficient removal of metal chips, ideally suited for automated production — Special Features & Advantages • Precise CNC machining thanks to premium SIEMENS control • Flexible production options with counter spindle & C-axis • Ideal for complex, rotationally symmetrical, and demanding parts • High process reliability and reduced setup times • Suitable for high-performance and series production • Compact design and small footprint — Fields of Application • Mechanical engineering • Automotive and supply industries • Medical technology • Hydraulic/pneumatic component manufacturing • Contract manufacturing • Precision turned parts

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: DT1UE19035033062, This Rational UltraVent hood for Rational combi steamers, including connection kit, is compatible with CMP, SCC 61/101 electric combi steamers from model year 2011 to present (Index H+I). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Looking for a specific Rational device type? Contact us—we have access to a wide range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or iCombi Pro. Our used equipment service for you: • 6 months warranty on electrical parts, limited to the replacement of defective components, excluding labor costs for removal and installation • Professional refurbishment / inspection & expert cleaning • Tested & fully functional – or your money back • Flexible options for shipping or self-collection • Competent advice – before and after your purchase • Provision of operating manuals, wiring diagrams & spare parts • Safety inspection according to DGUV V3 Ndjdpfx Agexx Idljfed This UltraVent hood features patented condensation technology which captures and channels vapors and fumes, eliminating the need for elaborate exhaust installation. No external connection is required. Installation is simple and can even be done retrospectively. Technical data: • Dimensions (W x D x H): approx. 854 x 1226 x 470 mm • Power supply: V: 230 / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE19035033062 • Year of manufacture: 2019 Condition: used, fully functional Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain locations only by prior agreement Do you have questions, need advice, or wish to view the item on site? You can reach us by phone during our business hours: Monday-Friday 09:00-13:00 and 14:00-17:00. Sale is subject exclusively to our general terms and conditions (AGB).

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2460042, Technical Specifications: # Machining Area: X 300 mm; Y 500(725) mm; Z 375 mm # Axis Configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexable divider head, featuring direct angular measuring system, rotational speed up to 50 min⁻¹, accuracy +/- 5” # Maximum Part Clamping Dimensions: Ø 575 x 830 mm; Maximum weight 360 kg # Rapid Traverse Rate: X/Y/Z 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm Ndedsxwvlnspfx Agfjd # Distance Between Spindles: 300 mm # Spindle Speed: 1-17,500 rpm # Spindle Taper: DIN69893-HSK-A63 (with internal coolant) # Automatic Tool Changer: 2 x 32 tool positions / chip-to-chip average 2.5 seconds # Maximum Tool Diameter: Ø75 mm / Maximum Length: 275 mm / Maximum Weight: 7.5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Installed Power: approx. 85 kVA / 125A Dimensions: # Installation Footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment Includes: # CNC Control: Siemens 840D SL # Linear Axis Measuring System: Heidenhain linear scales # Chip Extractor: Knoll Type 550 K-1 # Oil Cooling System # Oil Filtration System, max 80 bar: Knoll 550 K-1 450_2450 (can serve 2 machines simultaneously) # Shaft, Guideways, and Switchboard Cooling System # 2 Oil Lubrication Units # Oil Vapor Absorption/Recovery Unit: IFS Vario E2000 (2,000 m³/h) # Fire Suppression: Kraft & Bauer # Part Presence P/Y: low pressure air detectors # In-process Gauging: Marposs T25 # Tool Breakage Detection System: BRK and length check via inductive sensor # Tool Support Detection System in Working Spindle # Documentation: Only manuals available Machine Condition: Fully operational

Condition: excellent (used), Year of construction: 2023, CNC Turning and Milling Center with Sub-Spindle, Y- and B-Axis Only 99 spindle hours Manufacturer: OKUMA Model: MULTUS U3000 1SW 1500 Year of manufacture: 12/2022 – Commissioned in 2023 Control: OKUMA OSP-P3000SA Operating hours, approx.: Spindle run time: 99 h, NC run time: 278 h (as of July 2025) Tooling system: Capto C6 TECHNICAL DATA: Turning diameter: 650 mm Turning length: approx. 1,500 mm Main spindle speed: 5,000 rpm Motor: 22kW, 427 Nm Nedpfx Aew U Ey Rogfedd Number of tools: 80 Spindle nose KK size 6, front bearing Ø 120 mm, spindle bore Ø 80 mm, 2-speed spindle, range shifting at full speed Sub-spindle: front bearing Ø 120 mm, spindle bore Ø 80 mm, 2-speed operation, range shifting at full speed, available on W-axis, spindle synchronization, programmable axial pressure for secure face contact, jaw cleaning with air C-axis 360°, positioning in 0.001° increments Y-axis travel +125 / -125 = 250 mm B-axis 240°, positioning in 0.001° increments Tool spindle (Okuma motor spindle) 22 kW / 120 Nm / 12,000 rpm SPECIAL FEATURES: • Enlarged main spindle KK size 8, front bearing Ø 140 mm, bore Ø 91 mm • Hollow clamping cylinder Ø 86 mm SMW VNK T2 200-86 with bore Ø 86 mm • Cylinder flange • Full-stroke cylinder SMW SIN-S 175 • Tooling system Capto C6 for H1-turret • External and through-tool spindle air supply for turning holders and rotating tools (switchable between air/emulsion) • Tool magazine with 80 positions • Coolant flushing via M-function, for main and sub-spindle • Hinge belt chip conveyor • Drum-type filter TMF 300 • Supply pump TC 160/740 pressure: 8 bar, TH428A690 pressure: 20 bar • Bar feeder interface • Programmable workpiece catcher • Robot-loader interface • Electric door automation • Automatic shutdown • In-process measurement, Renishaw probe • Y-axis measurement • Automatic zero-point shift in Z- and C-axis • Multifunction tool software for radially mounted indexable inserts • Control expansion kit KIT One-Touch IGF-N-D: – Dialog programming Advanced One-touch, automatic job planning – Circular arc tapping – Programmable tool life, call-up of sister tools by time in cut, quantity, correction addition, and tool wear EQUIPMENT: • Sub-spindle, turning length approx. 1,500 mm and H1 turret • Collision Avoidance System (CAS) • 19” color LCD TFT with multi-touch screen • Tool monitoring system • Tool measuring device • Handwheel • MacMan machine management • Part program memory 2GB • 2x USB 2.0 • Ethernet • Remote diagnostics prepared (service costs may apply) • Harmonic spindle speed oscillation via periodic speed variation • Tool height correction in Y for turning tools • Circular thread milling X/Z/Y/B (helical interpolation) including eccentric milling X/Y/C • Hi-Cut Pro high-speed control for rotating tools • 10 workpiece zero points • Coordinate transformation (shifting, rotation) • Electric spindle orientation +/- 0.1° New price: over €530,000 This used machine can be inspected under production conditions. All details are without guarantee – sale excluding any warranties or liability. Subject to prior sale.

Condition: like new (used), Year of construction: 2018, Panhans Mortising Machine Type: 116/10 - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Color: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Fixed table, smooth-running mobile drill motor Mobility kit for increased flexibility Cast iron table 700 x 380 mm, thick-walled and highly ribbed Smooth, backlash-free cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length restriction via adjustable side stops left and right Drill motor output 1.3 kW/1.8 HP with motor brake and convenient tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling system for row drilling with indexing roller: 16, 22, 25, and 32 mm, high-precision machined indexing, fixing via spring-loaded indexing bolt Detachable frame stop with index pin for positions: center, left, right CE-compliant GS certified Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available - Nsdpsxgu Tvjfx Agfedd

Condition: ready for operation (used), Year of construction: 2016, General Data Measurements width 2200 mm Measurements depth 2100 mm Measurements height 2600 mm Machine weight 3400 kg Main Drive Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 660 mm X-Axis Rapid Traverse 36 m/min Y-Axis Movement 406 mm Y-Axis Rapid Traverse 36 m/min Z-Axis Movement 508 mm Z-Axis Rapid Traverse 36 m/min Table Tslots size 14 mm Number of tslots 3 Table load 500 kg Tools Number of index 20 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VM10i was manufactured in 2016. It features a robust table size of 760 × 406 mm, capable of handling a maximum load of 500 kg. The spindle can reach speeds up to 10,000 rpm, supported by a 7.5 kW motor. It includes an automatic tool changer with a capacity of 20 tools. Ideal for precision machining with rapid traverse rates of 36 m/min. Contact us for more information about this machine. Application Types Ndjdpfxjxu Rxwo Agfsd Milling

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: ET1UE16015012747, This Rational Ultra Vent hood for Rational combi steamers, including connection kit, is suitable for the combi steamers CMP, SCC 61/101 electric from year of manufacture 2011 onwards (Index H+I). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. This Ultra Vent hood features patented condensation technology, which captures and channels steam and vapor. Extensive exhaust duct installations are a thing of the past. No external ducting is required at all. Installation is simple and can even be done retroactively. Technical data: Dimensions (WxDxH): approx. 854 x 1226 x 470 mm Electrical connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE17035018073 Year of manufacture: 2017 Type: 60.72.320 Nsdpfxexxzc Io Agfsdd Condition: Used, fully functional Shipping: Collection or delivery by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior agreement If you have any questions, require advice, or would like to inspect the item on site, you can reach us by telephone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale takes place exclusively under our general terms and conditions.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm Njdpsxwmvkofx Agfedd # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Njdpfxor Eli Tj Agfedd Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 2200 mm Measurements depth 2600 mm Measurements height 2800 mm Machine weight 4000 kg Main Drive Spindle speed range 12000 Tool taper BT40 Nedpfsxuwzfox Agfsdd Number of axis 3 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Number of tslots 3 Table load 750 kg Tools Number of index 20 Max weight 7 kg Max tool diameter 80 mm Max tool length 250 mm This 3-axis Hurco VMX30 was manufactured in 2019. It features a robust vertical machining center design with a table size of 1,016 × 508 mm and a maximum load of 750 kg. The spindle supports speeds up to 12,000 rpm with a power of approximately 11 kW. It includes an automatic tool changer with a capacity of 20 tools. If you are looking to get high-quality milling capabilities consider the Hurco VMX30 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: ET1UE18035024513, This Rational Ultra Vent Hood for Rational combination steamers, including a connection kit, is suitable for combi steamers CMP, SCC 61/101 electric from model year 2011 up to the current models (Index H+I). The hood has been tested in our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Nedpfx Agjxxy Atofedd This Ultra Vent hood utilizes the patented condensation technology, which captures and channels steam and vapors. Complex exhaust installation measures are no longer necessary. No external vent connection is required. Installation is simple and can even be carried out retrospectively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE18035024513 Year of manufacture: 2018 Type: 60.72.320 Condition: used, fully functional Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement If you have questions, require advice, or would like to view the item on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 & 14:00–17:00. Sale is exclusively subject to our general terms and conditions.

Condition: repair required (used), Year of construction: 2011, functionality: not functional, machine/vehicle number: 66101, Technical Specifications: Work Area - Maximum diameter of the clamping plate: 260 mm - Maximum turning diameter: 250 mm - Maximum machining diameter: 220 mm - Maximum workpiece length: 200 mm - X-axis travel: 626 mm / X-axis rapid traverse: 60 m/min - Z-axis travel: 250 mm / Z-axis rapid traverse: 30 m/min - Y-axis travel: +100/-90 mm / Y-axis rapid traverse: 30 m/min - Standard closed workpiece automation: Pick-up station from individual nests, conveyor system Main Spindle - Spindle according to DIN 55026: Size 6 - Maximum speed: 5,500 rpm - Power (continuous duty): 38 kW - Torque (continuous duty): 300 Nm Tool Holder with Driven Tools - Tool interface: VDI40 DIN 5480 - Number of positions: 12-station disc turret, all positions driven - Maximum speed: 6,000 rpm, Torque capacity: 70–100 Nm per driven station Electrical Equipment - Operating voltage: 2x400 V, 160A GL fuse - Connected load: 90 kW Dimensions - Overall dimensions: Length = 3,390 mm, Width = 2,850 mm, Height = 2,400 mm - Weight: 16,000 kg Main Features and Capabilities: - Vertical design: Optimized for efficient chip removal and straightforward loading/unloading - Control system: Siemens 840D SL Ndedpoxwk S Aofx Agfjd - High precision: Positioning accuracy in X, Y, and Z axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated systems for part feeding and removal - Live tooling (Sauter turret): Enables drilling and milling operations - Cooling & paper filtration unit: DGS System GMBH, 950 L - Chip conveyor: DGS System GMBH - Hydraulic unit: Rexroth Q = 13 l/min, pmax = 65 bar - Mist extraction units: IFS model IFM1000 - Documentation: Available Machine Condition: NOT WORKING - Pick-up pneumatic cylinder - Turret indexing motor - Door closing pneumatic piston - Door safety switch (Euchner) - Z-axis linear scale - Siemens power supply

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Ndjdexdttpspfx Agfsd Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Spindle motor power 35 KW Number of axis 4 Turret Nodpfx Agexxnc Ijfsdd Number of turrets 1 Tools Number of index 12 This 4-axis SPINNER TC 77 was manufactured in 2007. A robust horizontal turning machine, it offers precision and reliability for various turning applications. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 77 machine we have for sale. Contact us for more information. Application Types Turning

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops Ndodpfoxdttisx Agfod - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,243 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Number of axis 4 Tools Number of index 100 Type of tool holder HSK 63 Additional Equipment 40 bar IKZ This 4-axis DMG DECKEL MAHO DMF 300 was manufactured in 2003. It features a vertical machining center with 100 ATC tools, HSK 63, and a 40 bar IKZ. Consider the opportunity to buy this DMG DECKEL MAHO DMF 300 vertical machining center. Contact us for more information about this machine. Njdpfxexx Dzyo Agfodd Application Types Milling