Used Industrial Polishing Machine for sale (85,084)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4650x2230x2135 mm Weight 5800 kg Total power requirement 19,8 kw Hjdjvz Epuspfx Aa Sjff

Condition: excellent (used), YUKI INDUSTRIAL SEWING MACHINE with 4 threads, cord sewing machine, with table and air assistance during operation. IN MINT CONDITION. Hfedpod Swvuefx Aa Sef

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 10258-1, Technical characteristics: - Payload Capacity: Basket size 180x170 mm, Height approx. 150 mm - Tanks capacity: 1 tank 775 L - Washing chamber capacity: 790L - Conveyor velocity: approx. 0.4 m/min - Average load weight approx. 50 kg; maximum 100 kg - Mechanical weight: 4500 kg Hsdpfx Ajxxkk Ioa Sjff Electrical Equipment - Operating voltage: 400Vx3 - Connection power: 35 kW / rated current 65A Dimensions - Machine Dimensions (L×W×H): 4000 × 2000 × 2000 mm Equipment consists of: - Main machine LPW, manual loading/unloading (Loading height approx. 930 mm) - Three-phase separator approx. 100 L/h for oil separation - Performance: Spray pressure max. 5.0 bar Machine status: WORKING

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Hfjdpfx Aajdzqn De Sef Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm Hfsdsdzqmhopfx Aa Sef working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: like new (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR Surplus to requirements with only 58 hours working time This machine has been re-configured to have one abrasive belt and two subsequent ScotchBrite barrel brushes ideal for processing smaller sheet metal profiles. 650mm processing width Tampico cleaning brushes on the back end of the conveyor also included. Dust extractor not included but options can be discussed Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) Hfedpfx Aownukmja Ssf For a full quotation, technical information or any questions you might have about this machine please contact us

Condition: good (used), Code: 0118 Brand: DE STEFANI Model: MV Automatic polishing machine for edges for polishing polyester, polyurethane and other paints Features: Track drive system with rubberized skids Manual upper presser with rubberized wheels Adjustable support bar for wide pieces Composition: 1° Group - N° 2 adjustable brushes - Motor Hp 4 2° Group - N° 1 Brush - Motor Hp 2 Working surface height mm 870 Feed speed 5 to 25 mt/min Working length min mm 150 Working height min/max mm 10/100 Working width min 50 Protection cabin Electrical cabinet Overall dimensions mm 2700 x 1000 x 1250 h Hsdpfx Aaewiv Dks Seff Weight kg 1500

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZBF03, overall weight: 650 kg, total width: 1,500 mm, total height: 1,500 mm, total length: 1,800 mm, tank capacity: 30 l, compressed air connection: 0.4 bar, transport height: 1,600 mm, transport length: 2,000 mm, transport width: 1,600 mm, Equipment: CE marking, This machine is mainly available to fill nail glue into various round and flat glass and plastic bottleswith the filing range from 5-20ml. High precision cam provides a regular plate to position, inner,brush and cap; accelerating cam makes capping heads going up and down; constant turning armscrews caps, peristaltic pump and pressure tank filling time measures filling volume; and touchscreen controls all action. No bottle no filling and no capping. lf there is no plug in the bottle, itmust not cap until having been detected plug in the bottle. The machine with advantage of highposition. Hsdpfx Aasxunhvo Sjff

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07758, We offer this Tonello 70 L1 ECOFREE 2 industrial washing machine in very good condition, year of manufacture 2018. Brand: Tonello Hfedpsyt Hcwefx Aa Ssf Model: 70 L1 ECOFREE 2 Year of manufacture: 2018 Condition: very good Category ID: 2065 Type ID: 1018 Type: industrial washing machine If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), functionality: fully functional, Brush sanding machine after lacquering RESINFER C-900 R Working width: 900 mm Hfsdpsx Uw Sgofx Aa Sof Working height: 160 mm Number of sanding units: 4

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Hodpoyrr Uvefx Aa Seff Very good condition

Condition: excellent (used), Filling machine TM Industry Belgium M 25 for filling liquids Filling range 0,5-30kg Hfodpfsiu H Uvsx Aa Sof Very good condition, directly from production!!!

Condition: good (used), Year of construction: 1997, Rust size: 700 x 650 x 1.100 mm (W x H x L) batch weight: 350 kg heating: electrical, 70 kW Hsdpfxeydlh He Aa Ssff temperature: max. 80°C

Condition: excellent (used), Continuous rotary table HAU R60 - 1800, with 60 workpiece spindles, mounted in a pitch circle diameter of 1800mm, 3 polishing units with 7,5 kW each, polishing shaft diameter of 50 mm, width of polishing wheel 2 x max. 400 mm and 1 x 280 mm, diameter of polishing wheel s max. 420 mm, motorized longitudinal and height adjustment of polishing units, machine equipped with liquid compound feeding system More pictures on demand Hfedem Nbubepfx Aa Sjf

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Hfjdelccvmopfx Aa Ssf Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Hfsdpeyglkyjfx Aa Sef Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 5 h, machine/vehicle number: 6178, Exhibition machine: ACETI ART.70 Belt grinding and polishing machine with 2 motors 4.4 kW, 400 volts including 2 inverters T2 The machine is in our test room in Kobenz. Machine is new and has not run! GRINDING UNIT (left) - Sanding belt dimensions: 50 x 2500 - 3000 mm - Drive roller: 50 x ø 250 mm - Belt grinding arm: 0° - 90° - Belt speed: 18 - 36 m/sec POLISHING UNIT (right) - for grinding and polishing wheels: 300 x 35 mm - Brush maximum external size: 300 mm - Brush maximum width: 75 mm - Motor shaft diameter: ø 35 mm - Circumferential speed: 22 - 44 m/sec Hfodpfxsi Hp Nre Aa Sof Size: W: 1650 x D: 600 x H: 2200 mm Volume: 73dB Weight: 295kg (without inverter)

Condition: ready for operation (used), Year of construction: 2001, ROTER BERG – Polishing Stand - Infinitely variable speed control 200 – 1100 rpm - Automatic brake - Chuck diameter 200 mm with interchangeable jaws - Center height 300 mm - Drive power 0.75 kW Hfjdpfxoyng A Hj Aa Sef - Connection cable Dimensions: LxWxH 0.6x0.5x0.4 meters / Weight: 95 kg Subject to errors and input mistakes.

Condition: used, machine/vehicle number: HR6-1200, Used rotary indexing table polishing machine HR6-1200 Manufacturer: Hau Rotary indexing table with 6 working spindles and 3 polishing stations equipped with high-pressure guns, 5.5 kW motors, Pneumatic clamping with Schunk PZN 100 clamping grippers, Schunk distributor. Hedpoyntrhofx Aa Ssff Control cabinet. Three rotary table polishing machines are available.

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Hfodpfog D Rfmex Aa Sef

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW Hedpfsdz Uzbsx Aa Sjff - speed 1420 U/min - working hight is 600 mm - conical shaft

Condition: like new (used), functionality: fully functional, power: 3 kW (4.08 HP), High-Gloss Polishing Machine / Polishing Stand Hjdpsym Atrefx Aa Seff Manufacturer: Bauerrichter Model: PM 88 This machine comes from a kitchen manufacturer and was used for, among other things, high-gloss fronts. The ultimate solution for stationary polishing! Motor approx. 3 kW, 230/400V Polishing shaft height / working height approx. 900 mm Polishing ring diameter max. 450 mm Usable polishing width 140 mm Storage table for e.g. polishing agents, tools... approx. 350 x 350 mm Execution - Stable, welded steel construction with mounting flange for floor fastening - One continuous polishing shaft, with polishing rings mounted on both right and left sides - Integrated storage table for polishing materials - Cover/protective hoods over the polishing rings Dimensions approx. 1600 x 1000 x 1200 mm (LxWxH) Weight approx. 400 kg Including brand-new pleated polishing mop set

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Hedpfx Aoxxaitja Soff

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis of 300mm is equipped with a 9kW electrospindle and 24000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots allowing manual clamping of irregular shapes. ATC - The machine is equipped with an automatic linear magazine with a capacity of 8 tools. The automatic cutter changer does not require manual tool changing by the operator. Within one process, the machine can perform a multitude of operations such as surface planning, milling and drilling with various tools. Reinforced HEAVY DUTY construction - the machine body consists of profiles with a wall thickness of up to 10 mm. The frame is welded in its entirety, then subjected to a stress-relieving process in special conditions, and finally milled. This sequence of the process ensures the achievement of excellent results in stiffness, stability and vibration resistance. INDUSTRY 2.0 is a must-have in production plants requiring maximum machine efficiency. Worktable size - X - 2100mm, Y - 4000mm, Z - 300mm Drive - Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) Drive transmission - The most precise NIDEC SHIMPO planetary reducers Runner system - PMI 25mm linear guides and carriages with helical inclined strips with maximum contact surface Electric spindle - 9kW, 24000 rpm on full ceramic bearings Guide lubrication system - Automatic Hfedpfxstvmcmj Aa Sjf Tool length measurement system - Automatic Control system - NK-105 G3 controller Cables - Fireproof, adapted to bending and protected against deformation Manufacturer: TechnologieCNC Model: 2140 INDUSTRY 2.0 ATC Max. working speed in free passes: up to 33m/min Max. working speed in material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (ramp entry function, automatic NESTING) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz A German vacuum pump BECKER VTLF 2.250 of the renowned BECKER brand with a capacity of up to 244m3/h is included in the standard equipment of the machine.

Condition: new, Year of construction: 2026, The INDUSTRY 2.0 series differs from the standard series by using the best and most precise engines in its class and drive transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis of 300mm is equipped with a 6kW electrospindle and 24,000 rpm on ceramic bearings. The machine's work table is made in hybrid technology - it has vacuum sections and subsections enabling automatic, non-invasive clamping of the processed material as well as T-slots enabling manual clamping. Included with the Milling Machine Becker KVT 3.140 Vacuum Pump Manufacturer: TechnologieCNC Model: 1530 INDUSTRY 2.0 Electric spindle: 6kW, 24000rpm on full ceramic bearings Max. working speed in slow passages: up to 33m/min Max. working speed in the material: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm Working surface X/Y/Z: 1500x3000x300mm - Hybrid table (vacuum+T-slot) Control: NK-105 controller Achieving high working speeds and machining stability is guaranteed by the Leadshine EASY-SERVO servo drives used in the machine with an encoder and drive transmission via a SHIMPO planetary reducer Software: CAD/CAM as standard: Artcam Open 2016 Power supply: 3PH, 400V, 50-60Hz Dimensions: For transport - 365 / 210 / 220 Machine assembled and ready to work - 365 / 245 / 230 Hybrid table, i.e. vacuum table enabling non-invasive element fixing, leaving the possibility of manual fixing of irregular shapes The machine frame is fully welded, stress-relieved and then milled, which ensures machining accuracy and stability of work Machine control using the DSP NK-105 controller A tool height sensor is included A central oil lubrication system for trolleys and guides as standard The drive is transferred via a reducer The machine moves on high-class guides and PMI 25mm linear bearings in all axes (X, Y, Z) Hfedpfetu S Srjx Aa Ssf Double LEADSHINE Easyservo servo drive on the Y axis Machine wiring made of high-class fire protection cables. The electric cables used to build the milling machine are adapted to bending and are protected against deformation