Used Infeed for sale (1,764)

Condition: excellent (used), Catalogue number 6393 TECHNICAL DATA - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal, 200 mm, 5.5 kW 2) Right vertical, 150 mm, 4 kW 3) Left vertical, 150 mm, 4 kW 4) Top horizontal, 200 mm, 5.5 kW - All cutterheads adjustable vertically and horizontally - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feed-in traction rollers, toothed (including 2 double) - 1 feed-out traction roller, rubber-coated From below: - Feed-in drive roller, toothed, steering, integrated in lower table - 3 side pressure rollers - Feed-out traction roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Height-adjustable table - Centralized lubrication system - Electric adjustment of planing thickness - Lift motor: 1.1 kW - Stepless feed speed control via inverter Fodpfx Ajymnqcodaefw - Feed drive motor: 3 kW - Feed via Cardan shafts - Fully enclosed in cabin - Extraction port diameters: 4 x 130 mm - Dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Approx. weight: 3,000 kg ADVANTAGES – Equipped with 4 cutterheads – Ideal for wet and dry timber – DTR operation and maintenance manual included – Used machine, very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7618 TECHNICAL DATA - shaft width: 500 mm - number of knives: 4 pcs - max thickness of workpiece: 230 mm top section: Fsdpfoymnm Dsx Adasfw - anti-kickback fingers - toothed, feed, swivel, sequential infeed shaft - pressure rollers - planing shaft - pressure roller - smooth feed outfeed shaft bottom section: - 2 slip rollers in the table - motor: 5.5 kW - manual table height adjustment - 2 feed speeds: 7.5; 13 m/min - extraction port diameter: 160 mm - dimensions (L/W/H): 1100x1000x1200 mm - weight: 600 kg ADVANTAGES – made in Italy – original paint (not repainted) – used thickness planer, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 PLN/EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm Fedpfsymm Itsx Adajfw - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7386 TECHNICAL DATA - max. saw blade diameter: 500mm - spindle diameter: 30mm - hydraulic clamp serves as blade guard - hydraulic blade stroke - max. cutting width: 550mm - 4 sliding rollers in the table - top feed roller, toothed and pressure type - max. cutting height (in the centre): 100mm - main motor: 5.9 kW - extraction port diameter: 100mm, 120mm - table dimensions: 700x630mm - table height from base: 830mm - infeed roller table - roller diameter: 350mm table size: - length/width: 4480x700mm - motor: 0.75kW - outfeed table (belt) - belt width: 510mm Fodsymm Hiepfx Adaefw table size: - length/width: 3130x800mm - motor: 0.75kW - machine dimensions (L/W/H): 890x910x1200mm - total weight approx.: 900kg – Infeed and outfeed table – Hydraulically adjustable blade – Used saw, in very good condition Net price: 24,900 PLN Net price: 5,930 EUR based on 4.2 EUR rate (Prices may vary with greater fluctuations)

Condition: excellent (used), CATALOG NUMBER 7186 TECHNICAL DATA - Max. planing width: 510 mm - Max. planing height, double-sided: 170 mm - Max. planing height, four-sided: 100 mm *Top section: - Infeed roller, toothed - Kickback fingers - Feed roller, toothed - Pressure bar - Planing shaft 510 mm, 4-knife (equipped with 2 knives) 4 kW - Outfeed roller, smooth *Bottom section: - Guide rail - Sliding roller – adjustable table with up/down roller Ffsdpfx Asx Sx S Nsdaow - Planing shaft 510 mm, 2-knife 4 kW - 2 smooth, sliding, adjustable rollers *Rear section: - 2 side spindles + pressure unit - 1) right vertical 100 mm 2.35 kW - 2) left vertical 100 mm 2.35 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Manual thickness adjustment - 4 feed speed options - Feed motor 1.5 kW - Overall dimensions (L/W/H): 1940 x 1320 x 1140 mm - Weight: 1330 kg ADVANTAGES – Ideal for processing beams, flooring, etc. – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs Fedeymm E Sepfx Adajfw - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Year of construction: 1989, condition: ready for operation (used), For sale: original 6m×4m infeed conveyor for Linck sawmill. Fedpfx Ajytbzujdaofw

Condition: used, Year of construction: 2016, Folding machine MBO K8 S-KTL/4 Year: 2016 Description: - 16 page folder - Colour monitor with touch screen - Semi automatic setting Feeder - Pallet feeder: K8-FP120 - Counter - Pump Folding unit MBO K8 S-KTL/4-FP120 - Parallel fold unit with 4 buckle plates: 66cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Delta 502 Year: 2007 - Vertical stack delivery with pressing - Banding device(s): 2 Infeed width: 17 -78 cm Fodpfxsyr Nype Adajfw Infeed length: 25 - 120 cm Max. mechanical speed: 10 - 230 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), Year of construction: 2020, operating hours: 80 h, overall weight: 1,000 kg, Wood Planer manufactured in 2020. This FORMAT4 EXACT 63 features a planing width of 630 mm and a table length of 1050 mm. It offers a thickness range of 3 – 300 mm with a maximum chip removal of 10 mm. If you are looking to get high-quality planing capabilities, consider the FORMAT4 EXACT 63 machine we have for sale. Contact us for further details. • Planing width: 630 mm • Table length: 1050 mm • Thickness range: 3–300 mm • Maximum chip removal: 10 mm Ffjdpfx Ajylkhzsdasw • Cutterblock: 4-knife system, diameter 120 mm, speed 4600 rpm, self-setting planer knives • Feed speed: stepless 5–20 m/min; feed unit with variable speed • Main motor: 10.0 kW • Electrical: 3 x 400 V, 50 Hz, duty type S6, star-delta start • Thickness height adjustment: electric with digital display • Position control: Digi Drive D1 with LED display for set/actual value; programmable positioning functions • Infeed roller: steel, spiral toothed, 630 mm • Outfeed roller: steel, 630 mm • Pressure bars: segmented at infeed; spring-loaded at outfeed • Side guiding strips on thickness table • Swiveling extraction hood • Machine weight: approx. 1000 kg • Control: conventional (non-CNC) Additional equipment • Table extension with workpiece roller, 630 x 570 mm

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Ffodpfoyaqmgex Adaow Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Year of construction: 2023, condition: ready for operation (used), travel distance X-axis: 600 mm, travel distance Y-axis: 498 mm, travel distance Z-axis: 640 mm, controller manufacturer: FANUC, overall weight: 6,000 kg, total width: 2,940 mm, total height: 2,203 mm, spindle motor power: 7,500 W, product length (max.): 3,400 mm, spindle speed (max.): 2,800 rpm, table length: 605 mm, table load: 1,500 kg, table width: 600 mm, number of axes: 3, This OKAMOTO ACC 64-6 CA-iQ was manufactured in 2023. It features a variable wheel speed up to 2800 min⁻¹, a spindle motor power of 7.5 kW, and a grinding wheel size of 405 x 50 mm. Ideal for precision surface grinding, this machine offers advanced control with its hydraulic and servo motors. Contact us for more information about this machine. • Feeds & speeds (common to all models) • X-axis (longitudinal) • Feed rate (hydraulic): 3–25 m/min (variable) • Handwheel feed: 47 mm per revolution • T-slots: 3 x 17 mm (optional) Fsdpfx Adjyfuv Ajajfw • Y-axis (vertical / grinding head) • Rapid feed: 2000 mm/min • Auto infeed (coarse): 0.001–0.03 mm (12 steps) • Auto infeed (fine): 0.0001–0.01 mm • Spark-out strokes: 0–5 • Handwheel division: µm • Z-axis (cross feed) • Continuous feed: 0–2 m/min • Intermittent feed: 0.5–20 mm • Rapid feed: 4 m/min • Handwheel division: 1 / / 50 µm • Grinding wheel & motors • Wheel dimensions (dia x width): 405 x 50 mm • Bore diameter: 127 mm • Wheel speed: 1–2800 min⁻¹ (variable) • Spindle motor power: 7.5 kW • Hydraulic pump motor: 2.2 kW • Vertical servo motor: 0.5 kW • Cross feed servo motor: 0.75 kW • Electrical requirements • Voltage/frequency: 400 V / 50 Hz • Connected load: approx. 24 kVA

Condition: ready for operation (used), Year of construction: 2010, This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for tact us for more information. Machine Benefits Technical Machine Benefits • Used drilling line with stacking system • Consisting of: infeed unit / throughfeed drilling machine / automatic stacking unit • Throughfeed drilling machine / 6 drilling supports from below / 4 drilling supports from above / throughfeed drilling machine / 5 drilling supports from below / 4 drilling supports from above • Note: the technical data and descriptions are taken from the order confirmation at the time. Data is for information purposes only and is not binding. Ffsdpfx Adjyap Uvjaew

Condition: ready for operation (used), Year of construction: 2019, overall weight: 2,000 kg, number of axes: 3, This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information. • Working area: 3000 × 2000 mm • Control: Automatic Mach3 CNC control (Hungarian user manual included) • Max speed: 10,000 mm/min • Milling unit: • 3 kW water-cooled milling motor • Milling tool diameter: 1–13 mm • Tool change system • Safety covers on motors (brush-type), included for milling unit • Saw unit: • Angle-adjustable circular saw with 4 kW motor • Pneumatic angle cutting method • Saw blade moves in Z direction • Max blade diameter: 400 mm • Protective cover above the saw blade • Table rotates with angle indicator in X–Y plane • Clamping: Pneumatic clamping • Measurement: Automatic length measurement • Safety: Optical emergency stop safety system • Included: Control computer and software • Installation & operating conditions: • Foundation: 10 cm thick concrete required • Rubber pads integrated into machine feet • Operating temperature: 10–30 °C • Hours: Used max. 700 hours Fjdpfoycv Axox Adajfw Additional equipment • Roller material infeed system: Front and rear, rollers on both sides • 5 m in front of the machine and 2 m behind • Chip/Dust extraction system: Dust extraction with four collection bags

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Fjdpfx Aex Rpdysdaofw Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: ready for operation (used), Year of construction: 2008, overall weight: 2,300 kg, cutting speed: 34,00,000 mm/min, This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details. • Cutting capacity round: 115 mm • Cutting capacity rectangular: 200 × 70 mm • Cutting capacity square: 105 × 105 mm • Saw blade diameter: 350 mm • Saw drive power: 6.5 / 8.0 kW • Control system: BEHRINGER PLC control • Lubrication: Micro spray system • Controlled zero stop (gesteuerte Nullkante) • Cutting gap extension (Schnittspalterweiterung) • Machine light • Vertical main clamping • Backstop lock (Rücklaufsperre) • Extraction system prepared Additional equipment Ffedpfx Adeykravjaew • Infeed roller conveyor: approx. 5000 mm (custom built)

Year of construction: 2005, condition: ready for operation (used), This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Additional equipment • Includes approx. 70 cutter heads Z4 • Several hundred new serrated-back knife blanks Machine Benefits Qualitative Machine Benefits • Groove guidance and hydraulic nuts Technical Machine Benefits • Working range (wxh): 230 x 120 mm • Number of spindles: 5 Fedpeyaihpefx Adaofw • Variable feed speed: 4 – 30 m/min • Spindle power output: bottom (infeed): 4 kw / right / left: 7. 5 kw each / top: 7. 5 kw / bottom (outfeed): 4 kw

Condition: ready for operation (used), Year of construction: 2013, total width: 1,750 mm, total height: 2,650 mm, overall weight: 1,200 kg, product length (max.): 6,700 mm, Panel saw manufactured in 2013. This STRIEBIG CONTROL 09 6224 features a cutting area of 5300 × 2240 mm and a maximum cutting depth of 80 mm. It includes advanced functionalities such as four-sided trimming, automatic top and bottom trimming, and a digital measuring system. Consider the opportunity to buy this STRIEBIG CONTROL 09 6224 panel saw. Contact us for further details. • Cutting area (L × H): 5300 × 2240 mm • Max. cutting depth: 80 mm • Motor power: 5.5 kW • Features/Options: • Four-sided trimming (4SB) • Automatic top trimming (ABO) • Automatic bottom trimming Fsdpfx Aeykrd Usdajfw • Scoring saw unit (VSA) • Digital measuring system (DMS) on both axes • Automatic saw beam locking with interface detection • Laser-assisted display of the horizontal cut • Automatic locking and swiveling of the saw unit • Automatic infeed and outfeed movement of the saw unit • Automatic fine adjustment of the saw motor • Full-surface birch plywood support wall with integrated small parts support • Selectable cutting cycle • 7.5" color touchscreen for visualization and operation • Condition: Good working condition (machine was only used for testing purposes)

Condition: ready for operation (used), Year of construction: 2022, This 5s LEADERMAC Compact LMC-530C was manufactured in 2022. It features a working width of 15 – 300 mm and a working thickness of 10 – 150 mm, making it suitable for various woodworking applications. With multiple spindles and a Schneider 5.7” EASYSET touchscreen control, this machine offers advanced capabilities. Consider the opportunity to buy this LEADERMAC Compact LMC-530C wood planer. Contact us for further details. • Ref.: e/haaaa/dc • Working width: 15–300 mm • Working thickness: 10–150 mm • Minimum workpiece length: 800 mm • Minimum consecutive length: 300 mm • Infeed table: 2500 mm • Pneumatic left side pressure roller • Two-piece pressure shoe • Schneider 5.7" EASYSET touchscreen control • NC control axis 3 (left radial) • NC control axis 4 (top radial) • NC control for pressure beam height adjustment • Feed motor: 7.5 HP, feed speed 6–24 m/min • 1st spindle: 15 HP, Ø50 mm, 6,000 rpm • 2nd spindle: 10 HP, Ø50 mm, 6,000 rpm • 3rd spindle: 10 HP, Ø50 mm, 6,000 rpm • 4th spindle: 20 HP, Ø50 mm, 6,000 rpm Fedpfeykbcasx Adaofw • 5th spindle: 20 HP, Ø50 mm, 6,000 rpm Additional equipment • Additional table for multi-rip saw • Anti-kickback device for multi-rip saw

Condition: used, Year of construction: 2003, Perfect binding line Consisting of Gathering machine Kollbus ZU 841.B Year: 2003 Description: - Hand feeding station: 1 - Number of gathering stations: 21 - Optical sheet control Reverse feeder Card gluer - Hotmelt glue unit: Nordson Problue 4 - Air center: Becker VariAir, 2005 - Set up element - Reject gate for incomplete products: AS 841 - Transfer into the binder Perfect binder Kolbus KM 410.B Year: 2003 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 20 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: Robatech ICS C 160 - PUR spine gluing unit, interchangeable (nozzle): EP 48V, 2008 - PUR premelter for PUR spine glue unit: Nordson DuraDrum DK 200, 2008 - Hotmelt side glue unit, interchangeable: 3 mm Ffsdjv N U U Nopfx Adaew - Premelter for side glue unit: Robatech ICS C 30 - Stream cover feeder: Non Stop - Na 400.B - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Description: - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed - Automatic hopper feeder for inline production - Counter stacker - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Description updated

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Release agent application Ffodpfxeyrfh No Adaow Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: excellent (used), CATALOG NUMBER 7902 Fodpsymfl Dsfx Adasfw Technical data: - max saw blade diameter: 450mm - spindle diameter: 30mm - top pneumatic hold-down - blade guards - blade guard also serves as hold-down - pneumatic blade stroke - max cutting width: 700mm - max cutting thickness: 110mm - main motor: 4kW - extraction outlet diameter: 120mm - table dimensions: 700x1030mm - 2 roller tables - infeed roller table with guide: 3000mm - outfeed roller table with guide + 3 pneumatic stoppers: 3000mm - roller width: 450mm - working pressure: 8 bar - overall machine dimensions (without roller tables) L/W/H: 940x780x1150mm - weight: 350kg ADVANTAGES – Manufacturer: MEBOR – Slovenia – 2 roller tables – pneumatic blade stroke – unpainted – used saw, excellent condition Net price: 28,900 PLN Net price: 6,880 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (If the exchange rate fluctuates significantly, the price may change)

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm - Weight: approx. 2000kg ADVANTAGES – Italian manufacture – Non-painted – Electric adjustment of body height – Used multi-blade saw, very good condition Fedpfxoymfg Ie Adaefw Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7134 TECHNICAL DATA - Max. planing width: 500 mm - Max. planing height: 190 mm Top section: - Anti-kickback fingers - Pulling feed roller, sequential - 2 rows of pressure rollers - Pull-in feed roller, sequential - 500 mm planing cutterhead, 4-knife, 7.5 kW motor - Pressure rollers - Smooth, pulling outfeed roller - Outfeed pressure roller Bottom section: - Adjustable infeed table + pressure roller - Smooth sliding roller - 500 mm planing cutterhead, 4-knife, 5.5 kW motor - 2 smooth sliding rollers - Side pressure roller Rear section: - Side spindles: 1) Right vertical 140 mm, 4 kW Fjdpfxsymfazs Adaefw 2) Left vertical 140 mm, 4 kW - Spindle diameter: 40 mm - Spindles adjustable up/down, right/left - Stepless feed speed adjustment: 8–30 m/min - Electric table lifting - Extraction port diameters: 2x145 mm, 2x160 mm - Dimensions (L/W/H): 2050 x 1700 x 1700 mm - Weight: 2100 kg FEATURES – Ideal for flooring production – Electric table lifting – Czech manufacture – Used planer, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on EUR rate 4.2) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7707 TECHNICAL DATA - Maximum saw blade diameter: 500 mm - Spindle diameter: 30 mm - Pneumatic material clamp - Pneumatic blade stroke - Maximum cutting width: 800 mm - Cutting height: 135 mm - Pneumatic control system Ffjdpfx Adoymd Nzoaew - Main motor power: 11 kW - Extraction port diameter: 2 x 110 mm - Table dimensions: 520 x 1550 mm - Table height from base: 810 mm Infeed roller table: - Dimensions (L/W/H): 2700 x 720 x 900 mm - Equipped with 3 pneumatic stops - Table fitted with guide rail - Roller size: 530 mm - 6 driven rollers, 1.5 kW Outfeed roller table: - Dimensions (L/W/H): 2050 x 700 x 800 mm - Roller size: 590 mm - 11 idler rollers - Equipped with 3 pneumatic stops Machine dimensions (L/W/H): 1900 x 1450 x 1600 mm - Total weight: 1500 kg ADVANTAGES - Supplied with two roller tables - Italian manufacture - Pneumatic control system - Pneumatic blade stroke (feed speed adjustable by handwheel) - Used saw in very good condition Net price: 33,900 PLN Net price: 8,070 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, Catalogue number S0232 - New machine, in stock Ffjdpfxoymd Nhe Adasw - CE certificate - Shaft width: 410 mm - 4-knife shaft - Protected cutter head Ø 125 mm - Planer knives: 410x35x3 mm - Cutting depth: 8 mm - Speed: 4700 rpm - Motor: 4.0 kW - Power supply: 3x400 V - Table length: 2650 mm - Infeed table length: 1500 mm - Outfeed table length: 1100 mm - Tilting fence 0°–45°, 1500x155 mm - Extraction port Ø 160 mm - Dimensions (L/W/H): 2650/900/1000 mm - Weight: 720 kg Net price: 21,000 PLN Net price: 4,900 EUR (based on 4.20 EUR exchange rate) (Prices may change due to currency fluctuations)