Used Injection 2000 T for sale (22,567)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 22,00,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN Pjdpfx Aasw U N Ixjhogu INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 61033935, clamping force: 4,500 kN, Equipment: documentation/manual, Krauss Maffei LRX 250 Robot Pgodpfx Aajw Dcppshsu Detailed specification in the attached file.

Condition: like new (used), Year of construction: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. distance between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Mould platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Pgedpew Aw Taofx Aahsu Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main drive power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated via the machine control panel Machine is in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical sectors). Machine is still powered, test possible. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operation video, technical documentation, and arrange a convenient date for a visit.

Condition: used, Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with support ribs -Length: 2000mm -Width: 1200mm -Groove width: 14 mm Pgedpfx Ast Uwx Reaheu -Total dimensions: 2000/1200/H230 mm -Weight: 1985 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 342363, clamping force: 1,000 kN, displacement volume: 2,000 cm³, injection pressure: 1,800 bar, mold height (min.): 60 mm, ejector stroke: 200 mm, plate length: 500 mm, plate width: 500 mm, total length: 5,650 mm, overall weight: 8,800 kg, number of injections: 1, power: 50 kW (67.98 HP), input frequency: 50 Hz, input voltage: 400 V, Horizontal rubber injection press currently in production at our plant in Sweden. Manufacturer LWB, model HCE 1000/2000, 1000kN clamping force and 2L injection volume with plate size 500x500. Press is sold because it will become empty due to product range disappearing and we need the space for another press. Pgjdpfxewtyftj Aahou

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 2000 mm -Length: 4000 mm Pjdohqt Hhspfx Aahsgu -Height: 255 mm -Plate thickness: 95 mm -Plate: with support ribs -Groove width: 42 mm -Groove spacing: 700 mm -Number: 2 clamping plates available -Price: per piece -Weight: 6600 kg/piece

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, Pjdpfekrgiqjx Aahogu -T-slot plate: clamping plate with solid base frame -Length: 3000 mm -Width: 2000 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 200 mm -Dimensions total: 3000/2000/H800 mm -Weight: 4500 kg

Condition: excellent (used), Year of construction: 2011, Arburg 570C 2000-800 / Operating hours: 4,403 in automatic mode Year of manufacture: 2011 Injection unit: Screw diameter: 45 mm Injection weight: 291 g Injection pressure: 2470 bar Dosage volume: 318 ccm Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Size of mounting plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Operating hours: 4,403 in automatic mode Euromap 67 Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 2 Injection unit hardened - bimetal Purchase of the machine by the first owner in 2012 Pedpfjxqyu Hex Aahegu Dimensions: Weight: 7,440 kg Length/Width/Height: 5.53x1.79x2.20 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2005, operating hours: 64,218 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, warehouse no.: 503128 manufacturer: ARBURG type: Allrounder 520 C 2000-800 controller: Selogica year of construction: 2005 operation hours: 64218 h clamping force: 2000 kN distance between tie-bars h x v: 520 x 520 mm size of mould plates h x v: 728 x 728 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface for handling Pgjdpfoxrz Rlsx Aahsu Schuko-socket 10A mould heating 12x measures of machine l x w x h: 5.45m x 1.95m x 2.1m total weight: 7300KG

Condition: excellent (used), Year of construction: 2014, operating hours: 29,497 h, functionality: fully functional, machine/vehicle number: 230240, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here, as a dealer specializing in injection moulding machinery, we are offering the following well-maintained used injection moulding machine: Naturally, we also purchase well-maintained injection moulding machines from model year 2010 onward. We have been a leading wholesaler of used injection moulding machines for over 25 years. Important notice – Tax advantage for used machines: From 01.07.2025, used machines can also benefit from a special depreciation scheme of 30% annually. In addition to the lower purchase price compared to new machinery, you can utilize the same depreciation allowances as with new machines (see: 'Growth Booster', (§ 7 paragraph 2 EStG-E)). Offered Machine: Arburg 1500T 2000-400 Vertical Rotary Table Machine Machine No. 225999 A full list of equipment is available in the downloadable documents (machine card). Control: Selogica Year of manufacture: 2013 • Total machine cycles: only 1,907,296 • Automatic operation hours: 42,160 Clamping Unit • Distance between platens: 700 mm • Clamping force: 200 t / 2000 kN • Mould installation height: 400 mm • Table diameter: 1500 mm • Rotary angle: 180° • Rotation time: 2.4 s min. • Maximum weight on rotary table: 1,050 kg • Ejector force: 45 kN / 175 mm stroke Injection Unit • Screw diameter: 40 mm • Shot volume: 201 ccm • Injection weight: 184 g • Injection pressure: 2,000 bar Extras Pgedpfx Aouuf Iaoaheu • 2-station rotary table, 180° forward/reverse alternating operation with servo-electric rotary drive and hydraulic locking pin for fine-centering of the rotary plate in end position; separating guard between clamping and loading areas, the height on the rotary plate adjustable to suit the mould bases, with media lines and connections for the mould bases • Rotary table diameter: 1500 mm • Max. clamping force: 2000 kN • Injection unit according to EUROMAP 400 • Screw diameter: 40 mm • Special ergonomic rotary table version with the following features: - Corrosion protection treatment for rotary table (VE 574/90) - Water connections: 2 circuits - 3 hydraulic connections for needle shut-off system - 3 core pulls - Per station: one core pull and 2 x tempering - 6 x mould temperature control - 12 control zones for mould heating circuits - 2 x Kistler cavity pressure sensors - Temperature monitoring for start-up components • Weight: 11,200 kg • Power: 22 kW motor – heating power 9.4 kW (5 zones) – connected load 100 A The machine is offered fully tested for functionality, fully operational with a start-up guarantee – tested before dismantling. About our company and offered machines: - We only sell our own machines purchased from current production, from our warehouse in Hannover. - All offered machines are tested before dismantling. - We DO NOT deal with insolvency goods – we are NOT brokers trading in third-party property. - All machines stem from successful businesses with a proven maintenance and servicing record. - All listed machines can be inspected at our warehouse.

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Condition: workshop checked Rigid milling spindle; new bearings Pgodpfx Asw I Uinsahou With table extension with extendable Frame support 2500 mm Motor 5.5 kW Speeds 3000/4500/6000/8000/10000 rpm Milling stop with 2 adjustment options; one overall stop and one rear removal jaw Suction hoods 120 mm Automatic motor brake Right-left rotation With Haffner feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Pgodpfjkwb Diox Aahsu Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2012, condition: ready for operation (used), This FANUC ROBOSHOT S-2000 i 150B was manufactured in 2012. A pristine electrical injection moulding machine, it has never been used, maintaining zero working hours. It features a 52 mm screw diameter. Consider the opportunity to buy this FANUC ROBOSHOT S-2000 i 150B electrical injection moulding machine. Contact us for more information. Pgedpjxmbwbofx Aahou Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production Line with Wemo 6-5 xDesign Robot / Machine in very good technical condition Year of manufacture: 2017 Injection Unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Shot volume: 226 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping unit: toggle lever Control: B&R touchscreen Pedpexqygiefx Aahsgu Additional Equipment: Hybrid machine: high-speed, energy-efficient, and extremely quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (for an additional charge) Injection unit is wear-resistant and corrosion-resistant Main drive motor: servo motor with inverter control Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for faster operation) Wemo 6-5 xDesign Robot Year of manufacture: 2017 4-axis robot: 3 axes driven by servo motors (electric) Robot safety package Robot supplied with adapter, Wemo WCS-R conveyor belt, and protective enclosure Purchase of robot and conveyor belt available at an extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating power: 11.3 kW Total power: 22.8 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: €25,000 net (price without robot)

Condition: excellent (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 20 mm, displacement volume: 31 cm³, ejector force: 25,000 N, ejector stroke: 175 mm, total length: 4,200 mm, total width: 2,100 mm, overall weight: 4,300 kg, type of input current: three-phase, input voltage: 400 V, turntable diameter: 1,200 mm, Equipment: documentation/manual, During the inspection, it was determined that the cylinder no longer met our quality standards. This means that you have the choice between a 25, 30, or 35 mm unit. This will be purchased individually for you and is included into our offered machine price. warehouse no.: 503459 manufacturer: ARBURG type: Allrounder 1200 T 1000-170 controller: Selogica year of construction: 2013 operation hours: 22420 h Pgedpjxrz Drsfx Aahju technical data clamping unit clamping force: 1000 kN min. mould height: 400 mm max. open daylight: 700 mm opening stroke: 300 mm round table diameter: 1200 mm equipment included 3x control for hotrunner screen text german CEE-socket 16A complact flash drive rotary table freely programmable inputs (2) and outputs (2) machine with material hopper machine incl. water flow regulator Hydraulically actuated needle shut-off-nozzle interface EUROMAP 67 Servomotor pump drive Energy-saving drive wear-resistant injection unit measures of machine l x w x h: 4.2m x 2.1m x 0m total weight: 4300KG

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle Pgjdpfew Tt R Isx Aaheu - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: used, Year of construction: 2013, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 405 cm³, injection pressure: 2,000 bar, injection weight: 397 g, mold height (min.): 300 mm, ejector stroke: 120 mm, opening stroke: 450 mm, type of input current: three-phase, pressing force: 200 t, For sale: Arburg 200T machine in very good condition. Podpfexqc Atox Aahjgu

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Pgodpfxjkv Uq Io Aahsu Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Pedpfx Aewugczeahegu Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Podpexqx E Dofx Aahjgu Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, operating hours: 56,000 h, For sale: Arburg 570-2000-800 injection moulding machine, year 2008. In very good technical and visual condition, operates very quietly, no oil leaks. Selogic control system. Bimetallic injection unit, 45 mm diameter. 1 x air, 2 x hydraulic core, robot interface. The machine is sold without material or colour additive feeders. Psdsukirbepfx Aahjgu

Condition: excellent (used), Year of construction: 2008, operating hours: 17,745 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, clearance between the columns: 630 mm, displacement volume: 570 cm³, ejector force: 58,000 N, ejector stroke: 200 mm, plate length: 1,050 mm, plate width: 995 mm, total length: 2,300 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 14,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, warehouse no.: 503469 manufacturer: KRAUSS MAFFEI type: KM 250-2000 CX controller: MC5 year of construction: 2008 operation hours: 17745 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1170 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 2x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 6.7m x 2.2m x 2.3m total weight: 14500KG Pedpfjxhg E Hox Aahegu technical data robot-system handling type: Linear manufacture: Krauss Maffei controller: LR 150 - 1577 X axis: 900 mm Y axis: 1400 mm Z axis: 2000 mm total weight: 395 kg

Condition: excellent (used), Year of construction: 2015, Netstal EVOS 5500-2000 Injection Molding Machine Year of manufacture: 2015 Very compact, hydraulic, three-plate clamping unit with encapsulated lubrication system, ensuring an oil-free environment in the mold space. High-precision and wear-resistant linear guides guarantee maximum mold longevity and increased machine availability. The hybrid injection unit features a modular design and a flexible performance package (metering, clamping, injection) that can be adapted to specific applications. The highest plasticizing performance and optimal melt quality are ensured by selecting process-appropriate components. Servo-electric metering drive and state-of-the-art valve technology guarantee energy-efficient operation. Technical parameters Certification: CE in accordance with EU Directive 2006/42/EC (EN 60204, etc.) Mold installation height: 600–1050 mm Injection unit drive: metering axis speed up to 420 rpm, torque 2400 Nm Injection unit Injection speed: maximum dynamics thanks to high-performance servo valve technology Screw: 62 mm diameter, 25.2D length, version B – Three-zone screw made of hardened, wear-resistant tool steel – Injection pressure: 2400 bar – Injection volume: 749 cm³ Clamping unit Ejector force: 123.2 kN Main drive: Eco Powerunit 55 kW – Dual pump system with hydraulic accumulator – High-efficiency synchronous drive – Adaptive control technology for maximum energy efficiency Oil cooling: supply water temperature 35°C Base Cylinder head with open nozzle, prepared for pneumatic control Guide bushing R = 35 mm, through-hole D = 5 mm Mold plate hole pattern: Euromap standard Centering and ejector system Centering on nozzle-side plate: D = 125 H7 x 20 mm (Euromap) Through-hole in moving platen: D = 80 mm Ejector hydraulics positioned on the operator offside Ejector hole pattern: Euromap Ejector controlled Mold hydraulics 4 hydraulic circuits for auxiliary functions (ejector, cores, nozzle pins) Electrically controlled check valves in circuits A + B Free configuration of functions with position protection Nozzle hydraulics with needle shut-off 4 hydraulic circuits Flow speed and pressure manually adjustable Open/close function Special software: cascade control Pneumatics and cooling Water cooling battery and hot runner circuit – 4-section, switchable Pneumatics: 2x 3/2 valve, capacity 890 l/min Location: on operator offside at nozzle-side platen Electronics / Software / Interfaces Frequency: 50 Hz Power supply: 400V, 3P + N + E, tolerance ±10% (transformer required for larger deviations) Surge protection Mold heating: – 4 circuits at 3.3 kW each – 8 circuits at 0.75 kW each Connectors: HAN 16E for power and sensors, Euromap 14 Sockets: – 2x 16A CEKON (main switch-controlled) Psdsxl Ul Ajpfx Aahogu – 1x 32A CEKON with RCD (FI) switch Interfaces: – Euromap 15 – full implementation (parts 1–5) – SPC (Statistical Process Control) – Euromap 66 (control of 5 heating/cooling units) – Euromap 67 (robot interface for ejector and hydraulics) External fault signals: 2 inputs in control cabinet Operator identification: PIN

Condition: used, Year of construction: 2007, Serial no. 204818, control unit, manufacturer Arburg, type Selogica, clamping force 2,000 kN, horizontal injection unit screw diameter 45, vertical injection unit screw diameter 35, extraction robot, manufacturer Hahn, type PL50CNC/A RMP, year of manufacture 2010, serial no. 20011557, powered belt conveyor, 4,000 x 600 mm, safety devices Pgsdpjxf A N Ajfx Aaheu

Condition: excellent (used), Year of construction: 2006, LWB Steinl VCRS-T 300/36 T / Machine like new Year of construction: 2006 Spraying unit: Metering volume: 36 ccm Clamping unit: Clamping force: 30t Ejector: hydraulic Clamping unit: hydraulic Control system: LWB ECO Additional equipment: Hydraulic core pull x 1 Control unit with air valve Pgodoxqxzlepfx Aahju The injection unit is made of bimetal Dimensions: Weight: 3000 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: On request