Used Injection 2000 T for sale (75,312)

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm Lhsdpfxeu Ix Dce Akmjn centre distance: 2000 mm spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine approx.LxWxH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg Ljdpfjy Dvlqjx Akmjhn power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Lhodpfewztq Eox Akmen Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Condition: ready for operation (used), Year of construction: 2000, SAMSYS MUS 2000 / Bar Feeder Magazine -CE marking -Year of manufacture 2000 -Country of origin: Switzerland -Bar diameter: 5 - 80 mm -Bar length: 250 - 1550 mm -Longitudinal movement: 600 mm Ledpfx Ajz Eqwxekmehn -Height adjustment: 775 - 1175 mm Dimensions: L x W x H 2.2 x 1.1 x 1.7 meters / Weight 500 kg Subject to errors and omissions.

Condition: excellent (used), Year of construction: 2006, load capacity: 150 kg, arm reach: 2,700 mm, The KUKA KR 150 is a 6-axis industrial robot designed for high-precision and high-speed applications. With a 150 kg payload capacity and a wide working envelope, it delivers reliable performance in tasks such as welding, assembly, handling, and machining. Model: KR150-2 2000 Condition: Used Year: 2006 Included: Manipulator + KRC2 + KCP2 Teachpendant + All Wire Sets Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Ljdpfx Aew Nat Ijkmohn (Source: Kuka's Website)

Condition: good (used), functionality: fully functional, Year of construction: 2010, 2-axis: Programmable X, R axis Bending length: 2100 mm Lhjdpfx Akeya Dggsmsn Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Dimensions (LxWxH): 2900 x 1900 x 3050 mm Weight: approx. 5200 kg The machine can be inspected under power at any time.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, GF AgieCharmilles CUT 2000 Oiltech Year of manufacture: 2012 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Lhsdpfx Akoztp Ememon Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg AGIE IPG-VO generator Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.07 – 0.30 mm including option KIT 70 Water bath machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Includes AGIEJOGGER hand box for comfortable setup VISION 5 control 15" LCD color screen, jog control panel and mouse Includes AGIESETUP 3D Includes Fast-Threading option Dimensions (length x width x height): 2095 x 1950 x 2232 mm Net weight: 3600 kg The machine will be completely overhauled and tested by us. A customized test cut is also possible. We also offer commissioning and on-site training for this machine.

Year of construction: 2016, condition: used, overall weight: 4,500 kg, total length: 3,760 mm, total width: 3,000 mm, total height: 2,750 mm, Wire EDM System GF AgieCharmilles CUT 2000 with loading robot (WorkPartner) General Information Machine type: CNC wire EDM machine with automation Model: CUT 2000 Automation: GF WorkPartner loading robot Control: Vision 5 (Windows XP) Generator: AGIE IPG-V high-performance generator Operating Hours Power On:  91,716 h Work On: 17,889 h Working Area / Travels X-axis: 350 mm Y-axis: 250 mm Z-axis: 256 mm U/V Axes Travel: ±70 mm Workpiece Data Max. workpiece size (W × D × H): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (standard), 400 kg (optional / bath load) Working table: 700 × 450 mm Machining Parameters Taper: 30° at 100 mm workpiece height Available wire diameters: 0.10 – 0.30 mm Best achievable surface finish: Ra 0.05 µm Lodpez Ivcrsfx Akmshn Wire threading: automatic Dielectric System Dielectric capacity: 700 liters Flushing: coaxial flushing system Cooling: external cooling required Automation Loading robot: GF WorkPartner Automatic loading and unloading Depending on magazine configuration, total handling weight can be approx. 400–800 kg Description The system consists of a CNC wire EDM machine GF AgieCharmilles CUT 2000 equipped with an integrated WorkPartner loading robot. The machine is designed for high-precision contour cutting with excellent surface quality and stable process performance. Features such as the automatic wire threading system, integrated dielectric unit and coaxial flushing enable reliable unattended operation. The WorkPartner robot expands the machine into an automated manufacturing cell, allowing longer machining cycles and significantly increased productivity. Weight approx.: 4,500 kg Dimensions (LxWxH) approx.: 3760 x 3000 x 2750 mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: Free loading on truck under power: No

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Lsdpfexzq I Sox Akmjhn Water treatment system available at additional cost

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 360 kg, Dimensions WxHxD: 900 x 1180 x 750 mm Weight: 360 kg Operating principle: hydropneumatic Working pressure (pneumatic): 8 bar Air consumption: 40 liters/stroke at 8 bar Pressing force: 32 kN at 8 bar Air connection: R 1/4" Ljdpfx Ajzvz Dtskmshn Punch stroke: 17 mm Return stroke: 140 mm Maximum punching height: 150 mm Maximum profile height: 210 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2008 (Multiple Options Available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. Lhedpsq Hfahsfx Akmsn

Year of construction: 2019, condition: used, Henkovac TPS 2000 Automatic Traysealer – Excellent Condition – In Stock (Netherlands) We offer a very clean and well-maintained Henkovac TPS 2000 traysealer, equipped with a powerful 160 m³/h Busch vacuum pump, now available directly from stock at STC Food Solutions in Emmeloord, The Netherlands. This machine has been taken straight out of production, is in excellent working condition, and ready for immediate use. With 1/2 Gastro tooling; 325 x 265 (2x) ----- Key Features - High-capacity automatic traysealer for MAP and vacuum packaging - Equipped with integrated Busch vacuum pump (160 m³/h) - Dual mould system – seal two trays simultaneously for high throughput - Suitable for a wide range of food products (meat, ready meals, vegetables, etc.) - Quick and easy mould change system - Transparent cover for excellent accessibility and cleaning - Flexible operation with programmable tray formats - Designed for continuous industrial production ----- Technical Specifications - Machine dimensions: 4750 x 1180 x 1550 mm - Vacuum pump: 160 m³/h Busch - Cycle time: 10–15 seconds - Power supply: 400V / 3-phase / 50 Hz - Power consumption: ±10 kW - Air requirement: 6 bar (max. 400 l/min) - Weight: ±1100 kg - Max tray size: 2 × 350 x 260 mm - Max tray depth: up to 120 mm ----- Why This Machine? The TPS 2000 is built for efficient, high-volume packaging with maximum flexibility. Thanks to its dual mould system, it can double production capacity or run different tray formats simultaneously. ----- Availability - Location: Emmeloord, The Netherlands - Status: In stock – immediately available - Condition: Very neat, directly from production ----- Interested? For pricing, additional photos, or a video of the machine in operation, feel free to contact us. Lhedpfxoy Nagij Akmsn More photos and full specifications: /

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Anuba head with spindle speed control Lodpjzkwhdjfx Akmehn 3.3 kW electric spindle Dual Anuba screwing system Compatible with Anuba Ø 14 (double OTLAV shank) Inverter for 3.3 kW milling machine TECNOS numerical control system Integrated PC with multilingual operating system Masterwork software – Office version Safety guards in compliance with CE regulations Power supply 400 V – 50 Hz Weight approx. 2480 kg.

Condition: used, Year of construction: 1988, Complete Printing Screen Engraving equipment : STORL LASER ENGRAVING FOR ROTARRY PRINTING SCREENS Laser Engraver Make : Stork Lsdpjy D Tgxofx Akmehn Type : Laser Engraver STK 2000 YoC : 1988 Major overhauled 2006, after used of only few years, then preserved and stored for future use Screen dia : 64 cm Length : 310 cm Lacquer Coater Make : Stork Type : RSE 3100 / Q4B1/2000 With end ring gluing unit Make : Stork Type : SCR-85 With 2 screen drying units, screen washing - COMPLETE UNIT REQUIRED FOR SCREENS Professionally marked and REMOVED from mill floor , must be moved immediately

Condition: excellent (used), Year of construction: 2010, WEINIG HYDROMAT 2000 WITH FLOATING VERTICAL SPINDLES OPPOSED FEED MOTOR 22 KW FEEDRATE MAX 100 M/MIN 300MM WIDE MOULDER 1ST SPINDLE BOTTOM 30 KW WITH COUNTER BEARING 2ND SPINDLE TOP 30 KW WITH COUNTER BEARING 3RD SPINDLE LEFT 22 KW OPPOSED 4TH SPINDLE RIGHT 22 KW OPPOSED VERTICAL SPINDLES FLOATING VERTICAL SPINDLES OPPOSED SPINDLES 6,000RPM WORKING WIDTH 300 MM PLANING HEIGHT 160 MM NUMBER OF SPINDLES 4 BOTTOM SPINDLES 1 SPINDLE DIAMETER 50 MM CONTINUOUSLY VARIABLE INVERTER DRIVE FEED FEED MOTOR 22 KW MAIN MOTOR POWER 30 KW SPINDLE(S) WITH COUNTERBEARING SEPERATE MOTOR PER SPINDLE MOTORIC ADJUSTMENT PROGRAMMABLE CONTROLLER INFEED TABLE LENGTH 700 MM TABLE ROLLERS DRIVEN LUBRICATION PUMP AUTOMATIC SHORT INFEED WITH 220MM TOP FEED ROLLERS Lodpfjz Dnr Rox Akmohn CONFORMITY MARKING CE MARK TOTAL CONNECTION 126 KW

Year of construction: 2009, condition: used, Complete Cermaic production factory for sale ! Factory consists : 1 GLAZING ROBOT GAIOTTO GA2000, MODEL RAG-GA2000 AXES in 2007 2 STOVE TURBO COMPACT MC 16, MODEL MC16 SAFF FORNI, in 2006 Lhedpfxszbtvaj Akmsn 3 STOVE TURBO COMPACT 12F, MODEL MC12, SAFF FORNI, in 2006 4 DRYER JULIUS LIPPERT, MODEL KTRO, in 1972 5 PRESS GEBER NETZCH VPPS, in 1972 6 BATTERY MOLDING BLOWTHERM, MODEL IH/AR 125, in 2010 7 PRESS PALAZZETTI - VICENTINI, MODEL HPO 1400 in 2006 8 CHAMBER FURNACE SAFF - TURBO COMPACT 25M3, MODEL 25M3 SAFF FORNI, in 2007 9 GAIOTTO GA 900 GLAZING ROBOT, MODEL GA 900 EV, in 200 10 BRAGANTI DRYER 11 MODEL MCZ FOR THE PRES 1 DRYER SPANISH SACMI, MODELSACMI RRL 90 in 1999 2 AUTOMATIC GLAZING LINE (EN.CO), in 2013 3 SACMI HYDRAULIC PRESS, MODEL PH 557, in 1992 4 RULI FURNACE KEMAC EK 17, MODEL EK 17, in 1999 5 CHAMBER FURNACE SAFF FORNI TURBOCOMPACT 16MC, in1996 6 CUTTING TABLE FORNATON, in2012 7 BRICK TRANSPORT TROLLEY 8 CHAMBER FURNACE TURBO METANO 12M3, MODEL TURBO, 2006 9 HOLZKRAFT KSO 1500 WOOD GRINDER, MODEL KSO 1500, in1993 10 BRA CUTTER 1 PRODUCTION LINE FOR FIRE MAT.TECHNOLOGY OF DRY PRESSING in 1980 2 DRY PRESSING PRESS LAEIS HPF 400, MODEL HPF 400, 3 FURNACE REIDHAMMER HWU 10, MODEL HWU 10: 4 MIXER FOR MIXTURE PREPARATION 5 MIXTURE CONVEYOR TO PRESS 6 HYDRAULIC LIFT PLATFORM

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Lodpfjzaf Hnox Akmehn Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: excellent (used), Year of construction: 2006, load capacity: 130 kg, arm reach: 2,900 mm, controller manufacturer: KUKA, controller model: KRC2, This system is equipped with a KUKA KRC2 control unit and features the KR 150 L130-2 2000 robot model. The robot offers a payload capacity of 130 kg and a reach of 2900 mm. It is suitable for high-precision applications. Main application areas: Spot and arc welding Heavy-duty material handling Palletizing CNC machine tending Press automation The robot is designed for reliable operation in demanding industrial environments. Lhodpfx Asw Idw Iskmen Model: KR 210 L150-2 2000 KRC2 ed05 Payload: 130kg Arm Reach: 2900 mm Condition: Used & Tested Year: 2006 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabinet + All Wire Sets + Teach Pendant As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. ( Source : Kuka's Website )

Year of construction: 2023, condition: excellent (used), functionality: fully functional, TOP workbench AT 2000 with beech wood top and drawers Beech wood worktop with a raised edge at the back Drawer unit on the left Storage shelf on the right at the bottom Stainless steel design Dimensions approx.: 2000 x 800 x 980 mm, W x D x H Used equipment, cleaned Lsdpfoxiu I Eox Akmohn Quality from a specialist company! Benefit from over 35 years of experience Visit our large showroom!

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces 35x72) Coolant system adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Lhsdpfezka Hiex Akmen Tool positions: 40 Tool diameter at full capacity: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hrs Spindle hours: approx. 5,000 hrs The following items are not included in the scope of delivery: vices, tools, extraction system, tool cart. Further technical data can be found in the attached documents.

Condition: excellent (used), mileage: 5,22,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs - Beacon(s) - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = Number of doors: 2 Cab: single Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension GVW: 28.000 kg Crane: PALFINGER, year of manufacture 2000, behind the cab Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Lhsdpfx Aeznd Dgekmsn When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 5,22,907 km, power: 268 kW (364.38 HP), first registration: 11/2000, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: air, number of seats: 3, Year of construction: 2000, Equipment: ABS, crane, = Additional options and accessories = - 3 chairs - Beacon(s) - Lift Axle - PTO - Radio/CD player - Steering Axle - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10,60 m Capacity kilo: 6560 kg = More information = General information Number of doors: 2 Cab: single Technical information Number of cylinders: 6 GVW: 28.000 kg Axle configuration Front axle: Steering Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Functional Crane: PALFINGER, year of manufacture 2000, behind the cab Condition Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Lhsdpfx Akezndyzsmjn When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet Lodpfjm Nb Risx Akmohn >capacity through spindle 60 mm >max. piece length 340 mm

Condition: excellent (used), Professional milling machine / shot blaster for floor preparation from the renowned Swiss manufacturer Blastrac / Früh. This machine is designed for milling, removal of coatings, adhesives, paint, epoxy resins, and for preparing concrete surfaces prior to further processing. The device is in good technical and visual condition. It features a robust industrial-grade build, equipped with a powerful ABB motor and a milling drum. It is ideal for both renovation and industrial tasks. Technical Data: • Manufacturer: Früh / Blastrac • Model: RT-2000 EL • Machine type: concrete scarifier / milling machine • Power supply: 230 V • Frequency: 50 Hz • Machine power: 1.85 kW • Motor: ABB Motors • Motor speed: 2800 rpm • Working capacitor: 50 µF / 400 V • Protection rating: IP55 • Machine number: 4122 000007 Applications: • Removal of coatings and paint • Concrete milling • Floor preparation • Removal of adhesives and resins • Renovation of industrial surfaces Lhedpfx Aoz Sm Amekmsn Condition: used, fully complete. The machine shows normal signs of wear consistent with use.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total length: 2,000 mm, total height: 890 mm, total width: 800 mm, Work table / baker’s table with beech wood work surface robust with storage shelf underneath stainless steel version Dimensions approx.: 2000 x 800 x 890 mm, WxDxH Used equipment, cleaned Surface sanded and re-oiled We have many more tables in stock! Lhsdpfewv E N Ajx Akmsn