Used Injection Molding Machine for sale (65,922)

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Itodpfxozqdibo Acaok Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Itedpfx Acjzvgu Deask Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 50 - 100 AX injection molding machine Electric injection molding machine Year of production - 2011 Working hours 47799 Operator language: German, Romanian, Czech Closing unit - Mold closing force: kN 500 - Mold opening force: kN 39.9 - Dimensions of the mounting plate (hxv): mm 510 X 460 - Distance between columns (hxv): mm 410 X 360 Itodpfx Aov Hxgqjcask Injection unit - Screw diameter: mm 25 - Injection pressure: bar 2025 - Injection volume: cm3 49 - Injection weight for PS: g 45 Dimensions and weight - Net weight with control cabinet: t 3.9 - Machine dimensions (length x width x height): m 4.13 x 1.6 x 1.8

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate dimensions (h x v): 1,168 x 1,144 mm Clear tie bar spacing (width x height): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving platen: 3,800 kg Maximum weight on fixed platen: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Max. ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Max. injection volume: 891 cm³ Max. injection speed: 160 mm/s Max. dosing stroke: 315 mm Max. nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure over dosing stroke programmable Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Machine weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console on fixed platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: The special option includes: • Plasticizing cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication, emergency stop interface); Iodpfxjy Hmfys Acaotk • Software with functional display pages for controlling the MuCell function; • Adapted nozzle guard; • Position-controlled high-speed screw (analog ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours.

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Ijdpfxeyak Ecj Acastk Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Steuerung: MC6 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 133477-100, clamping force: 1,100 kN, screw diameter: 40 mm, clearance between the columns: 470 mm, displacement volume: 201 cm³, injection pressure: 1,735 bar, injection weight: 183 g, mold height (min.): 250 mm, ejector stroke: 140 mm, opening stroke: 500 mm, plate length: 670 mm, plate width: 670 mm, total length: 4,500 mm, total width: 1,400 mm, total height: 2,000 mm, overall weight: 4,500 kg, heating capacity: 11.4 kW (15.50 HP), pressure: 275 bar, pump power: 18,500 W, power: 38 kW (51.67 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 80 A, Model: HM 110/350 UNILOG B6E Machine No.: 133477-100 Year of construction: 2011 Iedpfx Acjyw Udxeaetk Weight: 4500 kg Hydraulic system pressure: 275 bar Wiring diagram No.: HMB6E133477-100 Largest motor FLA: 33.4 A Control voltage: 24 V DC Electrical: 400 V, 80 A

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Itodpfx Acozkanyoaok Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Isdpfx Ajzc I Uaocastk Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Battenfeld TM Xpress 350/2250 injection molding machine Control system: B6P Year of manufacture: 2014 Operating hours: 47,000 hours We offer a Battenfeld TM Xpress 350/2250 injection molding machine in very good technical condition. The machine is regularly serviced, fully functional, and ready for immediate operation. Technical specifications Clamping unit Clamping force: 3500 kN (350 t) Platen dimensions: 1030 × 1140 mm Distance between columns: 710 × 710 mm Minimum mold height: 300 mm Maximum mold height: 710 mm Maximum opening: 1380 mm Centering ring diameter: 160 mm Ejector stroke: 200 mm Injection unit Screw diameter: 65 mm Injection volume: 1171 cm³ Injection shot weight (PS): 1078 g Maximum injection pressure: 2070 bar Maximum injection speed: 600 mm/s Equipment 4 × pneumatic valve Itodoziulwjpfx Acaok 1 × hydraulic core Dimensions and weight Length: approx. 6.9 m Width: approx. 1.9 m Height: approx. 2.4 m Weight: approx. 13,000 kg

Condition: used, Year of construction: 2015, Operating hours: 48039 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t Iodezlfmwepfx Acaetk

Condition: used, Year of construction: 2015, Operating hours: 52873 Clamping force: approx. 180 t Number of components: 2 Horizontal screw diameter: approx. 35 mm Vertical screw diameter: approx. 18 mm Core pull: 4 Itjdpfx Acozlgu Neaek Special equipment: Rotary table / indexing plate Hot runner zones: 28 Frequency: 50 Hz Supply voltage: 400 V Weight: approx. 10.1 + 0.6 t

Condition: good (used), Year of construction: 2014, 420 C 1000 - 290 Thermoplastic cylinder, complete, 35 mm, highly wear-resistant Standard screw coupling, coupling geometry, dual-edge Control system: Selogica direct Hydraulic system with 2 control pumps Anniversary model: GOLDEN EDITION For processing thermoplastics Open nozzle, 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blowing device 1 Selector unit, lateral installation, including connection Core pull 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket outlet: 1 CEE, 1 Schuko, in addition Interface for printer, serial USB CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Enhanced monitoring Equipment package: Enhanced traversing movements Equipment package: Production control Equipment package: Optimization / operator assistance Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and spare parts list Elastic machine mounting on vibration dampers Itedszub Snspfx Acask Connection for ejector plate securing Ejector quick-release coupling Control cabinet, water-cooled Socket outlet: 1 CEE, 1 Schuko Hydraulic ejector Protective device, open at the top

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Itsdpfxjx Eiq Ho Acaok Serial number: 173062 Control system: Arburg Selogica Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Iedpfx Asx Eitbocaotk Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Ijdpfx Acjx I Rqceaotk

Condition: used, Year of construction: 2017, Operating hours: 22,800 Frequency: 50 Hz Supply voltage: 400 V Itsdpjzlfc Eofx Acaek Weight: approx. 26.8 t

Condition: excellent (used), Year of construction: 2001, Injection moulding machine: Krauss Maffei KM 800-5000 MC Year of manufacture: 2001 Operating hours: 70,000 h Isdpjxqh I Iofx Acajtk Configuration: Machine with robot, safety cage and conveyor belt Availability: Two identical machines available Clamping unit: Clamping force: 8,000 kN Maximum mould opening force: 356 kN Moving platen opening force: 98 kN Moving platen closing force: 92 kN Mould platen dimensions (H x W): 1,610 mm x 1,530 mm Distance between tie bars (H x W): 1,120 mm x 1,000 mm Mould opening stroke: 1,400 mm Minimum mould height: 600 mm Maximum mould opening: 2,000 mm Hydraulic ejector stroke: 250 mm Injection unit: Screw diameter: 90 mm L/D ratio: 23 Injection pressure: 1,742 bar Injection volume: 2,863 cm³ Shot weight (PS): 2,605 g Dimensions and weight: Machine dimensions (LxWxH): 10.5 x 2.86 x 2.89 m Weight: 43 tonnes

Condition: used, Year of construction: 2017, machine/vehicle number: 244489, Machine as new. Very little used, only for sample production. Machine is fully equipped: see dokuments Machine houers 22039. Itjdpfox H Npusx Acask

Condition: used, Year of construction: 2000, (1) Injection Moulding Machine, Handling: Wittmann | WX142-0325 | 2023 Miscellaneous: 1x protective enclosure 1x handling system, Wittmann Series 9 1x conveyor belt incl. box-changing function 1x V2A reject chute Itjdpfey N R Uqjx Acajk 1x Euromap 12/67 conversion 1x external hot runner unit, Mold Masters M1-06-12 (year of manufacture 2016), 12 zones 1x conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 196 Current 2 (A): 110 Current 3 (A): 86 Current 4 (A): 67 Weight (t): 9.7 Pressure (bar): 190 Flow rate (l/min): 190

Condition: used, Year of construction: 2006, machine/vehicle number: 61008535, This KraussMaffei KM950-6100 MX large injection molding machine will be auctioned off online as part of our industrial auction / machinery auction – Wirthwein Friedberg GmbH – machines, packaging, and other materials. You can find this and many other items on our platform. Isdpfszqymisx Acaetk

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 132386-100.1, clamping force: 650 kN, clearance between the columns: 420 mm, column diameter: 65 mm, mold height (min.): 200 mm, ejector force: 22 N, ejector stroke: 150 mm, opening stroke: 450 mm, plate length: 630 mm, plate width: 630 mm, installation height: 650 mm, total length: 3,650 mm, total width: 1,350 mm, total height: 1,950 mm, overall weight: 3,100 kg, power: 11 kW (14.96 HP), Manufacturer: Wittmann Battenfeld Model: HM 65/130 Machine type: Injection molding machine Year of construction: 2010 Clamping force: 65 tons Weight: 3000 kg Hydraulic system pressure: 275 bar Largest motor FLA: 20.8 A Itodpfxoyw Ug Tj Acask Control voltage: 24 V Electrical: 400 V / 50 Hz Control system: Unilog B6S Country of origin: Austria Applications Suitable for: • plastic parts manufacturing • automotive plastic components • packaging products • electronics plastic housings • technical plastic parts • household plastic products • industrial plastic components

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Iodpfxjnfu I Ij Acaetk Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: excellent (used), Tederic D680 Injection Molding Machine Model: D680 Year of manufacture: 2019 Robot: SW7315DS Robot year of manufacture: 2019 Technical data Parameter Value Clamping force 6,800 kN (680 tons) Column spacing 1010 × 1010 mm Diameter of centering ring (injection side) 250 mm Diameter of centering ring (ejector side) None Minimum mold height 450 mm Maximum mold height 1100 mm Distance between platens 2250 mm Maximum opening stroke 1800 mm Injection volume 2531 cm³ Hydraulic ejector Yes Number of hydraulic circuits 3 Core pulling capability Yes Short cooling circuit Yes Isdpfxezilfbe Acastk Euromap / robot preparation Yes Screw diameter 85 mm Ejector stroke 300 mm Screw type Standard Motor power 53 kW Heater power 37 kW Equipment • SW7315DS linear robot • Hydraulic ejector • 3 hydraulic circuits • Euromap interface • Automation preparation • Short cooling circuit Operating history • Machine year of manufacture: 2019 • Total operating time: 31,272.6 h • Operating time in automatic mode: 9,990.2 h

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Itodozhwl Rjpfx Acask Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 - Mold opening stroke: mm 400 - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 - Number of cylinder heating zones: - 4 - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96

Condition: excellent (used), Year of construction: 2021, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 248760, clamping force: 40,000 kN, screw diameter: 70 mm, displacement volume: 1,212 cm³, injection pressure: 1,650 bar, injection weight: 1,030 g, mold height (min.): 450 mm, ejector force: 9,64,000 N, ejector stroke: 250 mm, opening stroke: 1,000 mm, plate length: 1,450 mm, plate width: 1,200 mm, plate height: 1,100 mm, installation height: 3,650 mm, total length: 7,740 mm, total width: 2,340 mm, total height: 2,300 mm, overall weight: 25,600 kg, heating capacity: 29 kW (39.43 HP), pressure: 200 bar, number of injections: 1, pump power: 56,000 W, power: 118 kW (160.44 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 213 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition, having been well-maintained. The machine comes with a Viper12 robot, which was originally supplied with it and can be seen in the accompanying photos. The robot’s control system is not integrated with the machine, so the robot can be removed and used separately, or another robot can be installed in its place. The machine has three air valves and two hydraulic valves, Euro map signals, and a signal for the dispensing unit’s rotation speed. The machine also has a strip guard, which is not included but can be arranged separately. The extruder’s heating elements are insulated with thermal insulation. Due to the guard, the machine can operate with the rear door open. It also has a water tank with 8 zones and two additional blocks with 8 outlets each. The machine has 8 zones for heating the tooling. Only PS material has been injection molded on this machine. Itjdpfx Acezqbk Neask