Used Injection for sale (1,802)

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Prodpfx Abeztzqzepea

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Prodpfx Abezvm E Aepoa Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Podpfx Abjzvmpnspora Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Prjdpfx Abjzt Ivdjpea Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Injection volume: 106 cm³ Injection shot weight: 94 g Clamping unit: Type: 60 / … Clamping force: 60 t Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data: Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 cc Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Podpozrngyofx Abpora Max. distance between mounting platens: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight: Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values: Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is generally functional but requires repair or maintenance. An inspection of the machine is strongly recommended. Further information on the condition can be provided upon request. Sale Location: [Insert location] Inspection possible by appointment Sale from the location Please contact us for further information, images, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Prsdpozvmxpefx Abpea Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Podpfxezvm Dle Abpora Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Podpfx Abszvm A Iepera Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Prsdpfxezvgu De Abpea Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Prjdszc Nwvopfx Abpoa Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Prsdpfx Aszvm T Tebpea Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Pedszvmx Nopfx Abpsra Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 3,50,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 2,04,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Psdpfx Abjznbqqopsra

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Prsdpfxezc Nywj Abpsa Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2014, condition: ready for operation (used), An ENGEL injection molding machine is offered. Clamping force: 1800kN, opening force: 96kN, max. opening stroke: 750mm, min. mold height: 300mm, max. platen distance: 1050mm, clear tie-bar spacing: tie-bar-less, mold mounting platens X/Y: 880mm/830mm, max. mold weight: 1500kg at center of gravity 230mm, ejector stroke: 180mm, ejector force forward/backward: 80kN/33kN, screw diameter: 55mm, metering stroke: 215mm, max. stroke volume: 510cm³, injection rate: 255cm³/s, max. injection pressure: 2050bar, nozzle stroke: 350mm, nozzle contact force: 67kN, injection unit heating capacity: 16.3kW, heating zones incl. nozzle: 5, barrel: M9 bimetallic barrel, integrated hot runner control zones: 24×220V, mold cooling circuits: 6×10l/min, hydraulic oil capacity: approx. 540l, operating hours: 67423h (as of 30.06.2026). The machine will be available from December. Machine dimensions X/Y/Z: approx. 6275mm/1888mm/2100mm, weight without mold: approx. 12200kg. Documentation available. An on-site inspection is possible. Prsdpfxszt Slps Abpsa

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm Pjdpjzn Ap Ijfx Abpsra 37,544 hours (25,846 net production hours) Note: Machine is part of an online auction!

Condition: used, Year of construction: 2005, Manufacturer: KRAUSS MAFFEI, Type: 1600-8100-1400MX, Year of manufacture: 2005, Serial No. 61007140, Control system: Krauss Maffei MC5, Clamping force: 1,600 t, 2 injection units, Minimum/maximum mold height: 700/1,600 mm, Platen spacing: 3,400 mm, Clear opening horizontal/vertical: 1,850/1,400 mm, 12 cascades, 48 hot runner nozzles, Core pulls hydr. 5 (DS) 5 (AS), Screw diameter: 105/60 mm, Injection weight: 4,100/600 g, Part removal robot, Manufacturer: Krauss Maffei, Belt conveyor, approx. 5,000 x 1,400 mm Prjdpfx Aszn Aqfsbpoa +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 Psdpfoycc N Ssx Abpera - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: used, Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible. Prodpfx Abszwgikspea

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production line with Wemo 6-5 xDesign robot, Wemo WCS-R conveyor belt, and safety enclosure / Machine in very good technical condition Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm Shot weight: 215 g Injection pressure: 1,984 bar Dosage volume: 226 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 510x510 mm Platen size: 740x740 mm Ejector: hydraulic Clamping system: toggle Control system: B&R - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner controller x 36 (available for an additional charge) Podpfezc Nrtjx Abpora Injection unit is wear-resistant and corrosion-resistant Main motor – servo motor with inverter drive Central lubrication Machine equipped with cylinder / battery with compressed nitrogen (extra charge for high-speed operation) Wemo 6-5 xDesign robot Year of manufacture: 2017 4-axis robot: 3 axes driven by electric servomotors Robot safety package included Robot with adapter, Wemo WCS-R conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 7,500 kg Length/Width/Height: 6.10 x 1.97 x 2.60 m Drive: Pump/motor: 11.5 kW Heating capacity: 11.3 kW Total power: 22.8 kW All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: 25,000.00 EUR net (price without robot)

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Predpfozpanwox Abpoa Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Prsdszub Hrjpfx Abpja Machine weight: 18,000 kg.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Pjdpfx Abjzc Nw Aepera Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 2,89,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 1,36,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Podjznll Sepfx Abpsra

Condition: good (used), Year of construction: 2014, 420 C 1000 - 290 Thermoplastic cylinder, complete, 35 mm, highly wear-resistant Standard screw coupling, coupling geometry, dual-edge Control system: Selogica direct Hydraulic system with 2 control pumps Anniversary model: GOLDEN EDITION For processing thermoplastics Open nozzle, 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blowing device 1 Selector unit, lateral installation, including connection Core pull 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket outlet: 1 CEE, 1 Schuko, in addition Interface for printer, serial USB CompactFlash interface for data set storage Operator authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Enhanced monitoring Equipment package: Enhanced traversing movements Equipment package: Production control Equipment package: Optimization / operator assistance Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and spare parts list Psdpfx Aezub Snsbpjra Elastic machine mounting on vibration dampers Connection for ejector plate securing Ejector quick-release coupling Control cabinet, water-cooled Socket outlet: 1 CEE, 1 Schuko Hydraulic ejector Protective device, open at the top