Used Injection for sale (1,793)

Condition: excellent (used), Year of construction: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticizing Unit Complete plasticizing unit designed for thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: Yes Nozzle type: Open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen size (H x V): 1270 × 1230 mm Tie bar clearance (H x V): 800 × 800 mm Max mould opening stroke: 1020 mm Min mould height: 580 mm Max platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward/backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw rotation speed: 285 rpm Plasticizing rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Nominal pump motor power: 75 kW Installed heater capacity: 29 kW Itodeyugkwepfx Abcjd Number of cylinder heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Max mould weight: 6700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with an ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to the actual demand during the production cycle. Key Benefits: - Reduction of electricity consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven industrial technology - Reduction of energy losses during idle runs - Lower heating of hydraulic system - Extended life of hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color monitor integrated with the control console Iodeyugfzopfx Abcotd Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (horizontal × vertical): 2,210 × 1,910 mm Tie bar spacing (horizontal × vertical): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Minimum mold height: 600 mm Maximum mold height: 1,200 mm Platen opening stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical-Hydraulic Equipment Rated drive motor power: 132 kW Installed heating capacity: 82 kW Number of barrel heating zones: 7 Dry cycle rate (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions & Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection molding machines. The system controls the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the current production cycle requirements. Key Benefits: - Reduction in electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Less heating of the hydraulic system - Increased longevity of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Ijdpfjyugctsx Abcotd Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum distance between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with the modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor’s rotational speed to the current demand during the production cycle. As a result, electrical energy is consumed only during the actual machine demand. Key Advantages - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Longer service life of hydraulic components - Possibility of installation on existing hydraulic injection moulding machines The ESS system enables a significant reduction in machine operating costs while maintaining full production parameters.

Condition: good (used), Year of construction: 2001, Injection Molding Machine NETSTAL S 6000-5500E Basic Information Manufacturer: Netstal Model: S 6000-5500E Itodpfx Absyugcgscjd Year of Manufacture: 2001 Operating hours: 88,933 h Clamping Unit Clamping force: 6,000 kN Mounting plate dimensions (H × W): 1,620 × 1,550 mm Tie-bar spacing (H × W): 1,020 × 1,020 mm Minimum mold height: 500 mm Maximum mold height: 1,000 mm Maximum mold opening: 1,950 mm Centering ring diameter: 160 mm Maximum ejector stroke: 280 mm Injection Unit Screw diameter: 90 mm L/D ratio: 27 Injection volume: 2,290 cm³ Shot weight (PS): 2,196 g Maximum injection pressure: 2,410 bar Maximum injection speed: 4,453 cm³/s Machine Dimensions and Weight Clamping unit dimensions: 7.21 × 2.40 × 2.50 m Injection unit dimensions: 4.60 × 2.61 × 2.50 m Total machine weight: 62,000 kg (62 t) Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system that enhances the energy efficiency of hydraulic injection molding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to the actual requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Benefits of the ESS System - Up to 30% reduction in electricity consumption - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for significant reduction of machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED Iedpfxoyugalj Abcjtd 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 Injection Moulding Machine Basic Information Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h Clamping Unit Clamping force: 2,300 kN Platen dimensions (horizontal × vertical): 2,900 × 2,500 mm Tie bar clearance (horizontal × vertical): 2,000 × 1,600 mm Minimum mould height: 700 mm Maximum mould height: 1,890 mm Maximum opening stroke: 3,800 mm Injection Unit Screw diameter: 135 mm Injection volume: 8,870 cm³ Shot weight (PS): 8,071 g Maximum injection pressure: 1,600 bar Machine Dimensions and Weight Net machine weight: 113 t Control cabinet weight: 18 t Total weight: approx. 131 t Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, which enhances the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor with a frequency inverter that adjusts the motor speed to match the current demand during production cycles. As a result, electrical energy is consumed only when it is actually required. ESS System Benefits - Reduction of electrical energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Prolonged service life of the motor and hydraulic components - Retrofit capability for existing hydraulic injection moulding machines The ESS system allows for significant reduction in machine operating costs while maintaining full production parameters. Ijdsyuf Tdopfx Abcstd

Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI Injection Moulding Machine KM 4000-24500 MC with optional ESS Energy Saving System Basic Data Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3,315 × 2,920 mm Tie bar clearance: 2,240 × 1,800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Maximum mould height: 2,000 mm Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Max. injection pressure: 1,843 bar Shot volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electro-hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS Energy Saving System (Energy Saving Systems) Ijdpfx Ajyuf N Ejbcstd The machine can be equipped with a state-of-the-art ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency converter, adjusting the motor speed to match the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is actually needed. Key Benefits of the ESS System - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy consumption during idle operation - Lower hydraulic system heat generation - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines without modifications to the machine’s structure The ESS system offers a modern solution to considerably reduce the operating costs of the injection moulding machine while maintaining full production capacity.

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) Itjdpfsppigdsx Abcjd delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iedpfx Aswd Udljbcstd

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, ejector stroke: 100 mm, overall weight: 5,900 kg, FANUC ROBOSHOT Alpha S220iA – 220T Electric Injection Moulding Machine Description FANUC ROBOSHOT Alpha S220iA all-electric injection moulding machine for sale. Itodpfx Aboytfwtscod The machine is known for high precision, energy efficiency and reliable performance in plastic injection moulding production. The machine is in good technical condition and can be inspected by appointment. Technical specifications Manufacturer: FANUC Model: ROBOSHOT Alpha S220iA Machine type: All-electric injection moulding machine Clamping force: 220 T Screw diameter: 52 mm Tie bar spacing: 650 × 650 mm Condition: Good working condition Location: Hungary

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 32 mm, clearance between the columns: 410 mm, column diameter: 60 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, ejector stroke: 100 mm, opening stroke: 350 mm, overall weight: 4,400 kg, FANUC ROBOSHOT Alpha S100iA Injection Moulding Machine for Sale For sale: a FANUC ROBOSHOT Alpha S100iA, fully electric injection moulding machine with 100 tons clamping force. The ROBOSHOT series is known as one of the most reliable industrial solutions for precise and energy-efficient plastic injection moulding. Key data: Clamping force: 100 tons Type: FANUC ROBOSHOT Alpha S100iA Fully electric drive Precise and energy-saving operation Good technical condition The machine has been removed from production / currently in working condition. Viewable by appointment. Isdpoytfmbjfx Abcotd 📍 Location: Komárom, Hungary If interested, I can provide further information, photos, and technical specifications upon request.

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Itjdpfxst A Ui Aj Abcsd Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table The machine has operated for almost 33,107 hours in automatic mode.

Condition: excellent (used), Year of construction: 2008, operating hours: 58,001 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Equipment: documentation/manual, Engel E Max cleanroom machine, year of manufacture 2008, including GEKU SR 500 ST linear robot. The machine has operated for just under 58,000 pump hours in automatic mode. It comes from a reputable producer in the pharmaceutical industry, which means both the machine and the handling system have been subject to very strict maintenance management and are in excellent condition. Iodpfjt A Ufwex Abcjtd

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding Itsdpfx Aox D Dkxebcjd

Condition: ready for operation (used), Year of construction: 2003, operating hours: 72,069 h, Injection Unit Screw diameter 90 mm Itsdpex D Ebljfx Abcjd Clamping Unit Clamping force 5500 kN This Engel CL 4550/550 was manufactured in 2003. It features a screw diameter of 90mm, a closing force of 5500kN, and an opening distance of 700mm. Mold installation height ranges from 250mm to 850mm, and the plant size is 1200x1200mm. Includes a robot but excludes water temperature control equipment and conveyor belt. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Isdpfx Abex D Nc Hecetd Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN Iodpfx Abjx D Ea Iecetd This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Screw diameter 55 mm Clamping Unit Clamping force 2500 kN Iodpfjx D Ecvox Abcstd This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 1989, Machine located in Germany Iodpoytpcyefx Abcjtd

Condition: good (used), Year of construction: 1990, Machine located in Germany Iodpfxsytpcao Abcetd

Condition: good (used), Year of construction: 2004, Machine located in Germany Itedpfx Abjytpbvjcod

Condition: good (used), Year of construction: 2001, The machine is located in Germany. Isdpfxeytpa Se Abcstd

Condition: good (used), Year of construction: 1997, Injection moulding machine – the machine is located in Germany Iodpfoytn U Uox Abcjtd

Condition: used, Year of construction: 2005, Demag System 200/500 This DEMAG injection moulding machine System 200/500-440, built in 2005, is being auctioned in our industry auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is taking place on our RESTLOS online platform. Further details on the machine: Complete injection moulding system with robotic automation, consisting of Demag injection moulding machine, Yaskawa 6-axis robot, laser marking system, screen printing station, conveyor technology, and temperature control units. Technical data Injection Moulding Machine Manufacturer: Demag Ergotech Model: System 200/500-440 Year of manufacture: 2005 Clamping force: 2000 kN (200 t) Injection unit: 440 Control unit: Ergocontrol C-Dias Connection: 3 × 400 V / 50 Hz Machine weight: approx. 7.7 t Operating hours cannot be read (counter unit was not powered) Industrial Robot Manufacturer: Yaskawa Motoman Model: MH6 Year of manufacture: 2010 Payload: 6 kg Control unit: DX100 Laser Marking System Manufacturer: Robot Technology GmbH Model: FLACS.MARK 30W Year of manufacture: 2018 Scope of supply - Demag injection moulding machine - Yaskawa Motoman MH6 robot with control - Robot safety cell - Laser marking system - Screen printing station - Conveyor / part handling technology - 2 temperature control units - Stäubli quick-change system QMC 121 - Kistler mould pressure measuring system - Industrial vacuum cleaner Itjdpfsynzx Nox Abced Notes - Please use the inspection date - Without tools, materials, and decoration unless expressly mentioned - Dismantling and loading by purchaser - As pictured, functionality untested - Without any other items possibly shown - Completeness unverified.

Condition: used, Year of construction: 2005, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, load hours: 40,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Itjdpfx Aeynbcnebcjd