Used Ink Station for sale (6,625)

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Hodpfx Afjxwcvmenjfl

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Hfsdpfx Asymazgefnol Manufacturer: Winkworth Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter

Condition: new, Brinkmann TA400/200+001 pump, serial number: 0411006766-60794001, unused, 100% functional, scope of delivery as shown in the photos. Hjdpfx Afjzkc T Esnsfl

Condition: new, Brinkmann TA400/200+001 pump, serial number: 080815245, unused, 100% functional, scope of delivery as shown in the photos. Hjdpfx Aezkc Ucsfnofl

Condition: used, Year of construction: 1995, A cap remover for removing crown caps from bottles in beer crates. Two crates are uncapped per cycle. The removed crown caps fall into a tray positioned beneath the machine. Additional title: Cap remover for crown caps with 2 uncapping heads Capacity filling line: 12000 Fl/h Formats: crown caps Running direction: left -> right Operation / Control: Simatic S5-95-U Position: in a footed stainless steel housing Base construction: straight-running Features: 2 uncorking heads, motorised crate transport, control cabinet with control buttons Hjdpfxozg Iy Aj Afnjfl

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 13778, Equipment: documentation/manual, Machine W&D 627 GS, Serial No. 13778 Hfedpfx Afozlh Nbensl • Manufactured from 1999 • 2 printing units for the outside • 1 printing unit for the inside • Gummed/Self-seal/Hotmelt adhesive application • Outer flap section • 1 window section • Drive controllers converted to Indra Drive Bosch REXROTH by W&D • Smallest product size: 83 x 120 mm • Largest product size: 185 x 330 mm • Bangtail station • Maximum output: 500 cycles

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Hsdpfx Afezfh Uqsnsfl Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below.

Condition: ready for operation (used), Brinkmann SFL1150/330-CM3+1841 pump with motor SN:1116020423 - 41314/2-IP 55F, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfedpfx Ast Sbmgefnol

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, loading space length: 7,700 mm, loading space width: 2,250 mm, loading space height: 2,480 mm, Equipment: ABS, tail-lift, Dinkel DTAKWLW 18000 Beverage Trailer with Swing Walls, SAF Axles, LBW For inquiries: 0726686 * Condition: Very good * First registration: 04/2019 Hodpfx Aozrirksfnefl * Permissible total weight: 18.00 t * ABS * Air suspension * Side swing walls * SAF axles Tail lift * Manufacturer: Bär * Load capacity: 2,000 kg Dimensions (loading area): Internal length: 7,700 mm Internal width: 2,250 mm Internal height: 2,480 mm Tires: 1st axle: 385 / 55 R 22.5, 25% air-sprung 2nd axle: 385 / 55 R 22.5, 25% air-sprung ----Price: 9,900 euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, Polish, and Russian Typographical errors, errors and prior sale excepted.

Condition: used, Separator for clarifying fruit juice Additional title: Plate centrifuge with self-emptying drum Hfodpfx Asztx S Nsfnol Drum speed: 5000 rpm Density liquid: 1000 kg/m³ Density solid: 1200 kg/m³ Features: Centrifuge, motor, sludge discharge, control cabinet

Condition: ready for operation (used), Steel angle / Clamping angle / Solid LxWxH 720mm x 650mm x 1550mm Thickness 65mm Weight 790 kg Hfodpfoztd U Aex Afnsl Errors and omissions excepted.

Condition: ready for operation (used), Brinkmann TA400/440+001 submersible pump, serial number: 1106017354-35087001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Hfodszirpgjpfx Afnjl

Condition: used, Year of construction: 2003, Technical details: Hsdpfx Afezcnq Ienofl weight of the machine ca.: 9,5 t

Condition: new, FLEXILINK XBTP 5A85 E conveyor chain – unused! – unused, in sealed original packaging, 100% functional, delivery as per photos Hfsdpfx Aoy Np T Esfnel

Condition: used, Three-phase motor, electric motor -Power: 0.85 kW -Speed: 2800 rpm -Shaft: Ø 14 x 27 mm -Construction: B14 Hfodpfx Aodzzilofnel -Dimensions: 245/175/H140 mm -Weight: 5.8 kg

Condition: good (used), Technical data for the pallet racking crossbeam: Racking system: Link 51 Type: Boltless XL Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: yellow Box profile: 80|53 x 45|25 mm Crossbeam type: 4 BST Step profile: H 28 mm, W 20 mm Clips: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of crossbeams: 900 kg, with evenly distributed load 02x Securing pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Hsdpokv Urwsfx Afnsfl Further information on the pallet racking crossbeam: Crossbeam type 4 BST is used to insert chipboard, steel panels, or similar materials, which then end up approximately flush with the top edge of the racking crossbeams. This prevents any height loss; furthermore, the front of the step crossbeam protects the floors or the insertion segments from damage. The crossbeams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, or similar items.

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Hodpfx Afslthgujnofl Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: used, maximum load weight: 14,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 09/2028, Year of construction: 2017, Internal vehicle number: G117 Available immediately on our premises in Kaufungen Hodpfx Aju D U U Aofnofl More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) 2 axles Permissible total weight 18,000 kg Unladen weight 3,490 kg Subject to errors. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Format 500 x 500 mm. Hfsdpfegt Unkox Afnel

Condition: excellent (used), Length: 25000 mm Hfsdpfx Ajh Rmthjfnol Width: 82 mm

Condition: excellent (used), Several pieces in stock. Size: 12,500 mm to 13,200 mm Hedpeh Rmt Nsfx Afnefl Width: 82 mm

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Hfsdork I D Rspfx Afnsl Clear width: approx. 730 mm L-profile: approx. 30 x 30 mm Top plate: approx. 95 x 60 x 6 mm Weight per unit: approx. 1.510 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data of the shelf rack: Shelving system: Dexion Type: HI280 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 2.630 mm Number of bays / shelf row: 02 pcs. á 1.290 mm Number of levels plus floor level: 04 pcs. Included in delivery: 03x shelf uprights, used Material color: sendzimir galvanized frame profile dim: 50 x 55 mm adjustment grid: 25 mm incl. cross and diagonal braces The uprights are pre-assembled 1.200 mm high 610 mm deep 08x shelves, used Material color: sendzimir galvanized dimensions: 1.275 x 575 x 30 mm weight / pcs.: approx. 4,78 kg max. load per shelf with evenly distributed load: 120 kg 06x shims, new type: HI280 U-PL. STD 42X50X1.2 VZ Material color: sendzimir galvanized Hodpfxepaihms Afnofl 08x shelf crossbars, used total length: 1.275 mm Z-profile: 50 x 25 mm number of hooks: 02 pcs. weight / pcs.: approx. 0,84 kg Material color: sendzimir galvanized 01x load plate with data of field and compartment loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm Remark: Since this is a used item, can be damaged, rusting or the like. may be present. General information about the item: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data: Manufacturer: BITO Pro Design: left-hand, 24310 Included in the scope of delivery: 1x Holder for push-through safety device, used Material color: Sendzimir galvanized Overall width: approx. 93 mm Overall depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (H x W) Hfsdpfx Afji El S Nsnol Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/piece: 0.189 kg

Condition: good (used), The scope of delivery includes: 1x used deep web beam Hfedpsi Dr S Eefx Afnel Material color: Sendzimir galvanized Overall length: approx. 1,020 mm Suitable for stand depth: approx. 1,000 mm Material thickness: approx. 2.40 mm Clear span: approx. 880 mm U-profile dimensions: 58 x 50 mm Crossbeam support: approx. 67 mm Weight/piece: approx. 2.870 kg General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope.