Used Intern for sale (9,096)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Lsdpfxofnlkwj Adworg The machine is CE certified.

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 Ledpfx Aefhgvwjdwjrg incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Lsdjwgc I Rjpfx Adwerg Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: used, Year of construction: 2005, functionality: fully functional, For sale is a complete shrink sleeve system consisting of an Etisleeve sleeve applicator and a multi-zone steam shrink tunnel Powersteam, both from the renowned manufacturer Sleever International. The system was in productive use until recently and efficiently processes shrink sleeves with high precision onto cylindrical containers. Machine Configuration: Sleeve Applicator Manufacturer: Sleever International Model: Etisleeve Type: 75 SL 2V 80 Year of manufacture: 2005 CE-compliant Steam Shrink Tunnel Manufacturer: Sleever International Model: Powersteam Type: MSA 250 Year of manufacture: 2005 Control & Operation – Integrated HMI control panel – Digital input of sleeve length – Performance display (products/min) – Cycle and process control – Safety monitoring (housing supervision, reset function) – Production and daily counters Technical Features: – Precise vertical sleeve application – Automatic sleeve film unwind – Centering station for precise positioning – Multi-zone steam shrink tunnel with stainless steel interior – Continuous stainless steel conveyor belt – Auger feed with interchangeable augers – Height- and format-adjustable guide rails – Full safety glazing with interlock system – Industrial-grade drives and robust mechanical components Formats & Performance: – Proven operation with 100 ml containers – Documented sleeve lengths (e.g., 155 mm) – Additional formats possible depending on configuration – Output depending on product approx. 40–80 containers/minute Lrodpfx Adex Tg Uboweg Condition: – Used – Complete and fully functional system Scope of Delivery: – Etisleeve sleeve applicator – Powersteam steam shrink tunnel – Integrated conveyor technology – Feed screws and visible format parts – Existing adjustment and format documentation The system is currently still fully assembled and available for inspection under production conditions. A live demonstration with product and sleeve film under power is possible by prior appointment. Location: – Berlin – Inspection possible Price: – On request

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control Lsdpfx Adewz Rfyjwerg

Condition: new, functionality: fully functional, New device (unused) MASS International Z-conveyor NDZ Inclined conveyor / belt conveyor Available at short notice Sample as shown: Height-adjustable inclined conveyor with adjustable angles Infeed section: 600 mm Inclined section: 1300 mm Discharge section: 500 mm Usable width: 250 mm External width: 305 mm (without motor) Height-adjustable discharge height: 700 - 1000 mm Adjustable angles for infeed and discharge sections Adjustable inclination PU belt Color: black L cleats Lsdpfoiz S Htex Adwsrg Cleat spacing: 500 mm Cleat height: 30 mm Belt speed: 3 m/min Standard control system with emergency stop / stop button Mobile on swivel castors with brakes Three-piece chute panels for infeed section

Condition: new, New machine Lrjdpfxsu Ti Tve Adwog MASS International Color Mixer / Batch Mixer Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.

Year of construction: 2014, condition: excellent (used), 4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. Lrsdpfeif Uglox Adwsg The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.

Condition: used, New: No Lodpfxjx Nvucj Adwjrg = Company Information = For further information, you can reach us on working days from 8:30 AM to 5:00 PM and on Saturdays from 10:00 AM to 3:00 PM via telephone. You can also email us at: See you soon!

Condition: new, Year of construction: 2026, Brand new installation from one of the world’s largest manufacturers, Dardi International / Flying Bridge design, 3x2 m cutting area, 2-D, linear guides with ball screw drives on all three axes, Yaskawa motors with controllers. Delivery time approx. 6–8 weeks, available directly in our showroom in Elsenfeld, with the following equipment: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. -- Other sizes available on request ---- Machine - 2x3m cutting area with stainless steel tank and wave-shaped replaceable steel supports - ESA PC control with WIN 11 - IGEMS 2-D CAD/CAM programming system including automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotary union - Automatic central lubrication - High-pressure supply via profile stand and shut-off valve - Allfi® abrasive feed system 1.3 t fully automatic - Allfi® abrasive metering system 2.0, stepless adjustment without pneumatics - KEYENCE light curtains for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. Lrjdpsx Ig Sijfx Adwsg We are the European distributor for Dardi International with 26 years of experience in high-pressure waterjet systems. At extra cost: - High-pressure pump BFT Ecotron 40.37+ - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional: Manual tilting head available at extra cost – see pictures.

Condition: excellent (used), IM Very good condition. Lsdpew Ebwuofx Adworg

Condition: used, Year of construction: 2005, Overview This sleeve applicator was manufactured in 2005 by the French company Sleever International. The model Powersleeve was used for applying shrink sleeves on two 1.5 L bottles in twin-pack format (2×1.5 L). The machine is still installed and connected but no longer in use, and will be available from December 20, 2025. Technical data Capacity: 12,000 bph Formats: Twin pack (2 × 1.5 L) Application: Cider, carbonated beverages, lemonades, sodas Machine dimensions: 1000 × 155 × 250 cm Power supply: 6 kW Condition: Good, functional when disconnected Lrjdpfx Adjxqn R Njwjg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors Lrjdpfx Asvwbvpjdwsg > Linear guides > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 5m, Used Machine Manufacturer: Mass International Model: NP / 042/71 Overall Dimensions: 5050 x 430 x 930 mm Lsdpov Dgrvsfx Adwerg Belt Size: 4750 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, Conveyor System, 6m, Used Machine Manufacturer: Mass International Ljdpfxsvvlkho Adwjrg Model: NP / 042/2 Overall Dimensions: 6000 x 480 x 1000 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min The conveyor is equipped with 3 fans, making the system ventilated/coolable. Electrical Specifications: 400 V

Condition: ready for operation (used), Conveyor Belt, INCLINED CONVEYOR BELT, Adjustable Conveyor Belt, Used Machine Manufacturer: Mass International s.r.l Model: NS00893 Overall Dimensions: 3590 x 690 x 950 mm Voltage: 380 V, 0.18 kW Height and inclination are adjustable Belt size: 3280 x 390 mm; horizontal side: 740 mm; inclined side: 2450 mm Lamella distance: 520 mm Lsdpfx Adsri Tk Iswsrg Protection and door structure above the belt are detachable

Condition: ready for operation (used), Conveyor Belt, Transport Belt, Running Belt 6m, Used Machine Manufacturer: Mass International Model: NP / 04270 Overall Dimensions: 6000 x 420 x 930 mm Belt Size: 5675 x 200 mm Belt Speed: 3.7 m/min Lrjdpfx Adov Dgndewsg The belt has 3 fans, and the track can be ventilated/cooled. Electrical Specifications: 400V

Condition: excellent (used), functionality: fully functional, Evaporative Condenser Baltimore Aircoil International VXC-250 Manufacturer: Baltimore Aircoil International Lrjdjxpxiajpfx Adwsg Model: VXC-250 Serial Number: H160220703 Dimensions: 3600 × 3530 × 5000 mm The BAC VXC-250 evaporative condenser is a high-performance unit designed for industrial cooling and HVAC systems. It operates based on the principle of evaporative cooling, which provides low energy consumption and efficient heat dissipation even under heavy loads. Robust construction and optimized fan efficiency ensure reliable operation and long service life. The VXC-250 model is adapted for operation in demanding industrial environments, offering high performance in a compact size.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment Lodpjv E Nwdsfx Adworg • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Lsdpfjxdimfsx Adworg Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination PU belt, super grip Belt speed: 3 m/min Lredpfx Aer A D S Eedwog Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Condition: new, New device MASS International Model NS1 Angle conveyor / L-conveyor / conveyor belt Available at short notice Adjustable angle conveyor NS1 with collecting plates in the feed section Example as shown: Feed section: 600 mm Incline section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and incline section Tilt angle variably adjustable Cleat height: 30 mm Cleat spacing: 500 mm Lredpfx Adsuip Ilewsg Belt speed: 3 m/min Mobile on lockable swivel castors Three-piece hopper plates for feed section Other angle conveyors available in different dimensions, see list image 4. Custom dimensions are no problem.

Condition: new, New device MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as shown: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm External width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles for the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel castors with brakes Side collecting plates in the infeed section Also available as an angled conveyor with supergrip belt and separator (see last two photos) Lrsdpfxed Tidxj Adweg Double roller separator with covered belt drive Covered with super grip Adjustable discharge chute

Condition: new, New device MASS International Angle Conveyor / Belt Conveyor L-shaped conveyor belt with fixed 35° angle Available at short notice Lredpfxohm Axgj Adwog MASS International Angle Conveyor NC1 Conveyor belt with fixed angle and collecting plates in the infeed section Example as illustrated: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Fixed angle between infeed and inclined section Inclination variably adjustable Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Mobile on swivel castors with brakes Optional: Dimensions to customer specification FDA-compliant belt Modified belt speed etc.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Lsdjhg Rcxjpfx Adwjrg Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /