Used Internal Cylindrical Grinding Machine for sale (96,931)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Kellenberger 600 U – Universal Cylindrical Grinding Machine Year of manufacture: 1982 Condition: Functional / Ready for operation Bwjdpfoxfi Aisx Abzsw Equipment: 2-axis digital readout Automatic grinding wheel infeed Technical data: Grinding capacity: Max. grinding diameter: approx. Ø 250 mm Max. grinding length: approx. 600 mm Workpiece spindle: Mount taper: MK 5 Maximum table swivel: approx. 10° Speed range: approx. 20–400 rpm Grinding spindle: Speeds: approx. 1500 / 1700 / 2200 / 3600 rpm Tailstock: MK 3 Price on request. Errors and omissions excepted!

Condition: used, Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Bwjdpfoxtmv Njx Abzjw Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 30013012, 27.10 25: Machine currently in serial production. Shutdown planned for mid-2026. Please state your offer price. Sale only within Europe, including Turkey. ----- For technical data, see handout. Without packaging; any warranty rights are excluded. Bjdoth Sc Hspfx Abzjww Should you wish to dismantle the system yourself, please indicate this in your bid. We do not assume any liability for the accuracy of the technical data, the completeness of accessories and tool equipment, nor for compliance with all safety and environmental protection requirements as specified in accident prevention regulations.

Condition: good (used), Internal item no.: 25079 No VAT can be stated, as margin scheme applies. Cylindrical grinding machine Bwedpexl S Tdsfx Abzew Overbeck 250R + Operating manual + Three-jaw chuck (workpiece clamping) + Collet set (workpiece clamping) Technical specifications: Max. grinding diameter: 100 mm Max. clamping length: 280 mm Max. grinding length: 250 mm Workpiece spindle speed: 150 - 1350 rpm (infinitely variable) Centre height: 100 mm Swing diameter: 180 mm Grinding spindle speed: 2250 / 2750 rpm Grinding wheel diameter: 300 mm Grinding wheel width: 60 mm Workpiece spindle taper: MT4 Tailstock taper: MT2 Power requirement: 4.5 kW Dimensions (LxW): 2.5 x 2.9 m Weight: 1700 kg The machine comes from a training workshop at a rehabilitation clinic and is in very well-maintained condition.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h Bjdpfoxtdfbjx Abzjww EQUIPMENT Touch probe (on 4th spindle position)

Condition: like new (used), Year of construction: 1984, functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,500 mm, grinding diameter: 320 mm, Cylindrical grinding machine TOS BHU 32A/1500, grinding diameter 320 mm, grinding length 1,500 mm, after our complete overhaul in 2016, in perfect technical and visual condition. Bedpfx Absxf Hniozsww

Condition: excellent (used), functionality: fully functional, Herminghausen SR2 High-precision and conventional centerless cylindrical grinding machine. High machine stability thanks to a robust cast iron bed and hydrodynamic plain bearing support. Thanks to the low design height, there is excellent accessibility to all key functions. Quick and easy retooling for different workpieces and materials. Bodpfxexrg Tle Abzoww The machine is in very good mechanical and electrical condition and is ready for immediate operation. A vibratory conveyor for workpiece removal and a vibratory bowl feeder with a diameter of 620 mm including table are included. Electrical documentation is available. Partial overhaul August 2025 Workpiece diameter: 0.5 - 40 mm Grinding wheel dimensions (DxWxB): 290 x 100 x 150 mm Control wheel dimensions (DxWxB): 200 x 100 x 120 mm Hydrodynamic plain bearing support for both grinding and control wheel spindles Infinitely variable control wheel speed regulation with digital speed display Plunge grinding via cam-controlled plunge grinding attachment Through-feed grinding possible with separate feed jaws

Condition: used, center height in crank: 125 mm, workpiece diameter between centers: 1,300 mm, pivoting range: 9 °, Cylindrical Grinding Machine Kellenberger 51 HU Center height: 125 mm Distance between centers: 1200 mm Work table surface: 1590 x 140 mm Surface grinding: 1300 x 200 mm Table longitudinal travel, manual and automatic: 1300 mm Table swivel: 9° Workhead: Speeds, 5 steps: 50–400 rpm Swivel: 360° Internal taper: MT5 Tailstock: Internal taper: MT3 Quill stroke: 18 mm Grinding spindle head: Cross travel: 320 mm Swivel: 360° Spindle speeds, 3 steps: 2000, 2400, and 3650 rpm Grinding wheel: 300 x 25 x 127 mm Motor: 3.5 HP Internal grinding attachment: Spindle speed: 14,000 rpm Machine weight: 1950 kg Bwodpfx Aoxpif Esbzsw Ask quote with transportation !

Condition: used, Year of construction: 1980, Technical details: grinding diameter: 380 mm grinding length: 1000 mm Bsdpfx Aewy Ri Nobzeww centre height: 180 mm grinding wheel diameter: 400 mm max. workpiece weight between centres: 250 kg total power requirement: 10 kW weight of the machine ca.: 4,1 t dimensions of the machine ca.: 3 x 2 x 1,6 m with internal grinding attachment with fixed and swivelling headstock with coolant tank *

Condition: good (used), grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 2,500 mm, total height: 1,800 mm, workpiece diameter between centers: 200 mm, workpiece length between centers: 480 mm, grinding wheel width: 80 mm, spindle speed (max.): 500 rpm, spindle speed (min.): 65 rpm, overall weight: 2,000 kg, grinding wheel bore: 103 mm, tailstock quill mount: MK 3, tailstock quill stroke: 20 mm, Equipment: rotational speed infinitely variable, TRAVEL PATHS & FEED: Cross slide travel: 150 mm Longitudinal slide travel: 420 mm Bwsdpfewxrbksx Abzsw Longitudinal slide speed: 0 – 5 m/min Workpiece table swivel: ±9° Cross slide travel (handwheel): 45 mm Adjustment travel (hydraulic): 40 mm Feed (automatic): max. 1.2 mm / Ø Fine feed (automatic): max. 0.15 mm / Ø Stepwise feed (automatic): max. 0.005 mm / Ø EQUIPMENT: Including coolant system Including a set of various suitable accessories for the machine

Condition: excellent (used), with internal grinding attachment Bjdpfsiu E Trex Abzoww Center height 125 mm Distance between centers 600 mm Grinding wheel 400 x 40 x 127 mm Misc.accessories MARCELS MASCHINEN AG

Condition: used, _____ Description: Year of manuf. : 1999 Control : Heidenhain 1830 M - KELCO 110/120 Grinding length : 1000 mm Centre width : 1000 mm Workpiece headstock: Swivel range:-10°/+100° Speed:800 rpm Center height:175 mm Internal mounting cone:MK5 Bwodpfx Ajwz T Azobzsw Short taper external:DIN 55026 Workpiece weight max.:150 kg Grinding headstock: Design:Tandem grinding headstock B-axis:-210°/+30° Internal grinding device:Internal grinding spindle Grinding table (X-Axis): X-axis:320 mm Max. speed:7.5 m/min Resolution:0.1 μm Lower table (Z-axis): Center distance:1,000 mm Z-axis:1,150 mm Max. speed:15 m/min Resolution:0.1 μm Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Tailstock:MK4, stroke 50 mm Workpiece measurement I:Movomatic TMP 91 Workpiece measurement II:Movomatic TNU 91 Tool measurement:Marpos A 90 Set-up mode:Electronic handwheel Accessories:Various flanges, tips and chucks

Condition: used, Year of construction: 1973, functionality: fully functional, machine/vehicle number: 40715, total width: 2,000 mm, total length: 2,500 mm, total height: 2,000 mm, grinding length: 160 mm, overall weight: 2,100 kg, grinding spindle motor power: 6,000 W, power: 6 kW (8.16 HP), grinding wheel speed: 1,75,000 rpm, Used ID/OD grinding machine. Machine is in normal condition. Bodpsww Tv Tefx Abzsww

Condition: used, center height in crank: 180 mm, distance between centers: 1,000 mm, ChatGPT sanoi: Cylindrical Grinding Machine Schaudt A510 N1000 Center height: 180 mm Bwjdpfx Absxpidbezjw Grinding diameter: Ø 290 mm Distance between centers: 1000 mm Equipped with many accessories. Ask quote including transportation !

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 300 mm grinding length: 600 mm centre height: 190 mm z-axis: 865 mm x-axis: 250 mm clamping length: 1000 mm peripheral speed: 45 m/sec grinding slide swivable +/-: 8 ° grinding wheel width x diameter: 80 x 508 mm work piece spindle speed: 1 - 800 U/min weight of the machine ca.: 5 t Machine with SIemens 840 C control Bodpjvgbzdsfx Abzsww - coolant device - Marposs measuring device *

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Bsdpfx Absh U Rznozsww Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: refurbished (used), Machine totaly reconditioned Bwjdpfowhk Uuex Abzjw With DRO Center height 175 mm Distance between centers 1000 mm Grinding wheel 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speeds 1'500-2'200 rpm With internal grinding attachement Misc. accessories MARCELS MASCHINEN AG

Condition: repair required (used), Type AS - 900 Machine No. 74054 Centre distance 900 mm Bedpfx Aexguxfsbzjww Centre height 150 mm Max. grinding wheel 400 x 80 x 127 mm Centre height 150 mm Centre distance 900 mm ..... Condition: The machine cannot be switched on! The following applies to this machine: Condition unknown! Scope of delivery as per attached images ....

Condition: refurbished (used), Year of construction: 1987, operating hours: 200 h, functionality: fully functional, Please make your inquiry by email. Bwjdpoxmiqcefx Abzow

Condition: new, Experience unmatched precision and performance with ROBBI cylindrical grinding machines. Our machines offer grinding lengths starting from 600mm and are available in semi-automatic and CNC versions. With a grinding diameter of 300-1000mm, you have endless possibilities. Some machines are available from stock! Discover our extensive range of special accessories that make your cylindrical grinding machine even more versatile. Whether for complex workpieces or challenging tasks, our machines always deliver the best results. Trust in ROBBI's years of experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Our selection of conventional or controlled machines with grinding length up to 2m (further models available upon request): TECHNICAL MAIN DATA: Model Omicron CNC 60 or semi-automatic series Grinding diameter 595/695 mm Grinding length 1000 - 3000 mm max. workpiece weight between centers 1200 kg TECHNICAL MAIN DATA: Model Omicron CNC 36/32 or semi-automatic series Grinding diameter 320 / 355 / 455 mm Grinding length 630 - 2030 mm max. workpiece weight 120 (250/300 opt.) kg CONVENTIONAL MACHINES: TECHNICAL MAIN DATA: Model Omicron E Series Grinding diameter 360 - 430 mm Grinding length 630 - 1530 mm Workpiece weight between centers 200 - 300 kg ACCESSORIES (EXAMPLE FOR OMICRON CNC 60): CNC control: Siemens 840D Glass scales: in the X-axis Coolant system: with coolant collection tank Grinding wheel dresser: mounted on the tailstock (without diamond) Telescopic cover: for the fabric table Machine oil: 5l for the spindle Frequency converter: for spindle motor and workpiece drive (stepless) Hydraulic unit: for controlling the tailstock quill Ball screw in axes: X and Z Optimized cycle with geometric and operational parameters - CNC grinding machines meet the requirements for producing medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be equipped with automatic measuring systems. - It is possible to design the grinding wheel for geometries specifically created for the required production type. - High-precision machining can be carried out when the grinding machines are equipped with a third interpolated axis and specially designed software. EASY PROGRAMMING Complex programs can be created without the need for knowledge of ISO programming. Bwodpfxjgay T Do Abzow The input of parameters is facilitated by a series of messages and symbols that explain the meaning of the different parameters step by step. Programming of work cycles is done by entering the same cycle parameters. The order of execution of the various cycles can be changed quickly and intuitively. By the way, in addition to affordable new machines and tested used ones, you can expect more from us: • Consultation and problem-solving on-site at your location • Organization of transport of your machine to your factory • Installation, assembly, commissioning, and operational handover and more.

Condition: used, Year of construction: 1982, Technical details: grinding diameter: 600 mm grinding length: 3000 mm centre height: 315 mm workpiece weight max.: 3000 kg work piece spindle speed: 8 - 120 U/min grinding wheel motor: 25 kW Bsdpfxjvb Dl Uj Abzsww grinding wheel speed: 45 m/sec grinding wheel width x diameter: 750 x 80 mm table speeds: 30 - 4500 mm/min feeds of grinding head: 0 - 5 mm/min table swivelabel +/-: 7,5 ° total power requirement: 55 kVA weight of the machine ca.: 18 t dimensions of the machine ca.: 11,5 x 4 x 2,2 m - Internal grinding device - taper grinding up to 10,1° based on diameter - automatic grinding cycle - grinding wheels and flanges - dressing device - coolant attachment - dust exhauster, various steady rests *

Condition: used, grinding diameter 350 mm grinding length 600 mm centre height 175 (125) mm grinding wheel diameter max. 400 mm grinding wheel width max. 50 mm speeds of grinding spindle 1500 / 1700 / 2200 U/min power capacity - grinding motor 3,0 kW turning speed range - workpiece spindle 20 - 400 U/min adjustment autom. at table reverse 0,001 - 0,03 mm/Ø rapid- return speed 40 mm grinding spindle head - swivable 270° (3 x 90°) grinding head swivelling 360 ° workpiece spindle head: MK 5 hydraulic power unit 0,60 x 0,45 x 0,60 m voltage 400 V grinding table: swivable 10° Grad grinding wheel size Ø400 x 50 x 127 mm (links) grinding wheel size Ø 225 x 20 x 76,2 mm (rechts) drive capacity - spindle motor 3,0 kW tailstock quill taper MT MK 3 quill stroke 30 mm Bwsdpfxoxh Rwys Abzew weight of the machine ca. 2,2 t dimensions of the machine ca. 2,58 x 1,68 x 1,67 m

Condition: excellent (used), Center height 180 mm Bedpfx Abovhafdezsww Distance between centers 1000 mm Grinding lenght 650 mm Grinding wheel 500 x 80 x 127 mm + 250 x 32 x 127 mm With internal grinding attachement Misc.accessories MARCELS MASCHINEN AG

Condition: good (used), Year of construction: 1987, TSCHUDIN Type HTG-610 U660 TSCHUDIN Type HTG-610 U660 Cylindrical Grinding Machine, year of manufacture 1987, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. TECHNICAL DATA MAIN DATA Centre distance: 600 mm Centre height: 100 mm Total power requirement: 4-8 HP MACHINE TABLE Table travel max.: 620 mm Table speed, stepless up to: 5 m/min Reversal delay up to: 4 sec Chuck base swivels: 7° GRINDING SPINDLE HEADSTOCK Wheel diameter: 300 mm Wheel bore (with 300 mm diameter): 127 mm Motor power with 300 mm wheel: 2.5 HP WORKPIECE SPINDLE HEADSTOCK Swivelling range: 360° Spindle taper: MT 4 Spindle speeds, stepless: 65-500 rpm Motor power: 0.5 HP TAILSTOCK Quill internal taper: MT 3 Quill stroke: 20 mm INTERNAL GRINDING ATTACHMENT Spindle diameter max.: 80 mm Motor power: 1.5 HP COOLANT TANK Capacity: 100 litres Bjdpfsw Iqr Sjx Abzoww Dimensions (LxWxH): 2160 x 1200 x 1350 mm Weight: 2600 kg About the machine: We are offering a TSCHUDIN Type HTG-610 U660 cylindrical grinding machine with automatic cycle, year 1987, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Tschudin also operates very quietly at high speeds. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself. You can find further cylindrical grinding machines from reputable manufacturers on our website.

Condition: excellent (used), Center height 300 mm Distance between centers 3500 mm Bodpetpgnhsfx Abzoww Grinding wheel 760 x 305 x 100 mm With DRO With measuring control MARPOSS Misc.accessories MARCELS MASCHINEN AG