Used International 400 for sale (37,813)

Condition: new, Year of construction: 2024, NDS 2 • Aluminum profile construction • Adjustable angle/tilt • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm Dsdpfx Aewktn Asbcjcn • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Year of construction: 1988, condition: used, Location Dcedpfx Abocrl Rlecon Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type negotiated Description Comments CARVING SIDED WITH MECHICZNYM FEED, TABLE Header 400 mm. The machine is equipped Pile GRADING AND FACE CUTTER control of the desktop, has a smooth ADJUSTMENTS FEED POSSIBILITY OF WORK CYCLE MANUAL AND AUTOMATIC MAIN ENGINE 5,5 kW MOTOR SAW GRADING 2.2 kW FACE AND FEED ENGINE 1.2 kW clamps on the table automatically tighten detail pneumatically. Fixing detail and The machine automatically releasing a very good stem diameter 35 mm HEIGHT 180 mm depth MILLING CUTTING MATERIAL SAW SAW CUTTING 140 mm.POSSIBILITY MILLING THE TABLE ANGLE

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with separator Dedjd Tidxspfx Abcscn available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Useful width 450 mm Outside width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt black with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m / min Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 48 kW (65.26 HP), type of input current: three-phase, ambient temperature (min.): -20 °C, input voltage: 400 V, noise level: 83 dB, Hitema International Unveils the APH.055: A Revolutionary Step in Sustainable Heating Hitema International is excited to unveil the APH.055, a cutting-edge air-cooled heat pump that redefines efficiency and environmental responsibility. With industries rapidly moving toward more sustainable practices, the APH.055 stands as a revolutionary solution for both heating and cooling. Perfect Timing for a Green Revolution: Dcodpfx Abjv Rmhqecjn The APH.055 uses R290 (propane), a natural refrigerant with an ultra-low GWP of just 3. As regulatory pressures increase on synthetic refrigerants, R290 is a forward-looking choice that offers unmatched sustainability without compromising performance. Dqxvon Innovative Features: Revolutionary Defrost System: This chiller boasts a patented defrost system, ensuring maximum efficiency in all weather conditions, even at ambient temperatures as low as -20°C. Versatile Operation: Whether cooling or heating, the APH.055 performs across a wide range of applications, delivering 48 kW of cooling and 60 kW of heating capacity. Unmatched Efficiency: The thermodynamic properties of R290 make this chiller more efficient than most synthetic refrigerants, reducing energy consumption and operational costs. Looking to the Future? As the market shifts towards natural refrigerants, the APH.055 represents the next step in sustainable heating and cooling technology TECHNICAL DATA: CHILLER COOLING CAPACITY 48KW Tin/out 15°C - 10°C HEAT PUMP HEATING CAPACITY 60KW Tin/out 55°C - 60°C

Condition: new, Year of construction: 2025, You can call us 24/7 for Primary Impact Crusher for Sale Our CPI series primary impact crushers offer a unique experience to their users by offering the highest efficiency and performance in stone crushing operations. CPI-1412, CPI-1415 and CPI-1620 models are designed to perfectly suit different needs and projects. Each of them has superior features with maximum feed sizes, crusher weights, motor powers and rotor diameters. The CPI-1412 model has an impressive crushing power with a maximum feed size of 900 x 900 mm and a weight of 23,000 kg. With its 250 kW engine power and 1.400 x 1.250 mm rotor diameter, it offers a production capacity of 200 - 250 tonnes per hour. As a stone crushing machine, it processes large pieces quickly and efficiently. Our CPI-1415 model draws attention with its 1.000 x 1.000 mm feed size and 28.000 kg weight. The 315 kW motor power and 1,400 x 1,540 mm rotor diameter support a production capacity of 350 - 400 tonnes per hour. This model is ideal for high capacity projects. Our largest model, the CPI-1620, with a feed size of 1,300 x 1,300 mm, is the perfect choice for crushing huge pieces. With a weight of 52,000 kg, dual 250 kW motor power and a rotor diameter of 1,600 x 2,000 mm, it reaches a production capacity of 400 - 600 tonnes per hour. This stone crusher provides reliable performance even on the most demanding projects. Our CPI series primary impact crushers can be used safely in all kinds of projects with their robust structure and high performance. Choose these stone crushers to achieve the best results and increase productivity in your projects. These crushers, which will meet all your needs with their high production capacity and powerful engines, will take your business one step further. Experience power and durability with CPI series. CPI-1412 Model Primary Impact Crusher Technical Specifications Maximum Feeding Size: 900 x 900 mm Crusher Weight: 23.000 kg Engine Power 250 kW Dcsdpfxoufg Ubs Abcsn Rotor Diameter: 1.400 x 1.250 mm Production Capacity: 200 - 250 t/h CPI-1415 Model Primary Impact Crusher Technical Specifications Maximum Feed Size: 1,000 x 1,000 mm Crusher Weight: 28,000 kg Engine Power 315 kW Rotor Diameter: 1.400 x 1.540 mm Production Capacity: 350 - 400 t/h Csmxtml2Xy CPI-1620 Model Primary Impact Crusher Technical Specifications Maximum Feeding Size: 1,300 x 1,300 mm Crusher Weight: 52,000 kg Engine Power 2 x 250 kW Rotor Diameter: 1.600 x 2.000 mm Production Capacity: 400 - 600 t/h

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: Dedpfefr Icuox Abcscn 1455 R.p.m. 400V 18,5 kW Shaft length 720mm Blade diameter 280mm For further data see type plate (photo)

Condition: new, Year of construction: 2025, MIXER Mod. MV2 • Steel construction, painted exterior (RAL 9006) • Capacity: 120 kg / 200 liters Dsdpfxowktm Eo Abcecn • Square frame: 700 x 700 mm • Adjustable height: from 1085 mm to 1385 mm (from the floor to the loading point) • Programmable control unit with emergency stop button (The customer can choose between manual mode - continuous operation - and automatic mode - with adjustable operating time and pause) • Geared motor: 0.5 HP / 0.37 kW, 220/380V, 50 Hz • Upper lifting door with hinges for loading material with safety microswitch • Lower lifting door for discharging material with safety microswitch • Side openings for connecting a suction hose • Mixer frame on adjustable telescopic legs with swivel wheels with brake

Condition: new, Year of construction: 2024, functionality: fully functional, The conveyor belt is for sale and has the following dimensions; infeed : 600 mm Ascending belt: 1300 mm Useful width: 450 total width: 505 mm Dsdpfolikx Ijx Abcjcn height adjustable: 750 - 1.050 mm Belt speed constant: 3m /min

Condition: new, New device MASS International Angled conveyor belt / Conveyor belt L - Conveyor belt with fixed angle 35° available at short notice MASS International NC1 angled conveyor belt Fixed angle conveyor belt with collecting plates in the feed section Example: NC 1 Feeding section 600 mm Rising part 1300 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable delivery height 750 - 1050 mm Fixed angle between feed and riser sections Variable inclination adjustment Djdpfxshm Axge Abcscn Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 320 kW (435.08 HP), type of input current: three-phase, overall weight: 3,843 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): -25 °C, input voltage: 400 V, volume flow: 55 m³/h, frequency: 50 Hz, total width: 2,210 mm, total length: 4,600 mm, total height: 2,500 mm, noise level: 65 dB, protection type (IP code): IP54, HITEMA INTERNATIONAL CHILLER TFVF.350 FREE COOLING CAPACITY 320KW Dcsdpev Rmdrefx Abcjn ATTENTION: > R-1234ze refrigerant type > This refrigerant is classified in group 2 'non-hazardous' according to the criteria of the Pressure Equipment Directive (PED) 97/23 / EC and 2014/68 / EC. According to IS0-817, the R-1234ze is classified in the A2L security group > Local codes the construction and safety standards must be respected > In the absence of local codes and standards, consult the guide to EN-378 (2017) (safety requirements for substances classified as A2L) or IS0- 5149 (2014) (for substances classified as A2L) > It is the responsibility of the installer to obtain approval from the local construction authorities

Condition: new, Year of construction: 2022, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 450 mm / total width 505 mm Dcjdpfxeg Arxvo Abcon - delivery height : min: 700mm max : 1000mm - cleats 30 mm high (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - frequency converter (485 €) - Corrugated edge (492 €)

Condition: new, New device MASS International Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Dcodpfx Ajh Nyp Uobcjn Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Condition: new, Year of construction: 2022, For sale is a CTM CT 200 tank from MASS. Dedpeip Ucnefx Abcjcn This is available in different sizes (see pictures).

Condition: new, New device MASS International Deposit conveyor NCRS1 available at short notice Adjustable angled conveyor belt, for picking up finished parts from handling or manual depositing and feeding of parts to working height or container Djdpfx Abjh Nytijcecn Example: NCRS 1 Feeding section 600 mm Descending section 1800 mm Effective width 350 mm Outer width 405 mm (without motor) Pick-up height feeding section 1000 - 1500 mm Discharge height of descending section 500 - 1000 mm Adjustable angle between feed and discharge sections Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: other sizes see standard list Dimensions on customer request FDA compliant belt Modified belt speed etc.

Year of construction: 2022, condition: new, Task: 600 mm Climbing belt: 1.800 mm delivery: 500 mm Dsdpfxsiq U S Te Abcscn useful width: 450 mm Total width: 505 mm Height: 1.000-1.300 mm

Condition: new, New device MASS International Deposit conveyor NPS Conveyor belt/deposit belt Available at short notice Deposit area without side wall Height adjustable, movable on steerable stop rollers Example: NPS 1 Length 1500 mm Useful width 250 mm Dcedpfeizi S Dox Abcen External width 250 mm (without motor) Deposit area without side wall, therefore full usable width Height adjustable Delivery height 200 - 400 mm PU belt Smooth, black Belt speed 3 m /min Movable on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Changed belt speed etc.

Year of construction: 2022, condition: new, - Delivery 500 mm - Climbing belt 1300 mm - Feed 600 mm - useful width 350 mm / total width 405 mm - delivery height : min: 700mm max : 1000mm - cleats 30 mm high Djdpfx Absf U Eu Hscscn (from a useful width of 350 mm the cleats are divided in the middle) - cleat spacing 500 mm Possible on request: - Special size - cycle control - Frequency converter

Condition: new, New device MASS International Z-conveyor belt NDZ3 Angle conveyor belt / conveyor belt Dcsdpfx Absiz S Htscsn available at short notice Description: Height-adjustable angle conveyor belt with adjustable angles Feed section 600 mm Rising section 1300 mm Discharge section 500 mm Useful width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable incline PU belt Color black L studs Stud spacing 500 mm Stud height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Year of construction: 2022, condition: new, Additional cost with corrugated edge : 374 € *Wavy edge is considered as optional equipment!* - mobile on steerable stop rollers - angle adjustable - incl. 3 collecting trays - task length : 600mm - ascending belt length : 1800 mm - belt speed : 3m/min - cleat height : 30 mm Dcedpfx Asf U Evgobcsn - spring assisted height adjustment

Condition: new, New device MASS International Z-conveyor belt NDZ1 Z conveyor belt/angled belt available at short notice Description: Height-adjustable angled conveyor belt with adjustable angles Feeding section 600 mm ascending section 1300 mm discharge section 500 mm Useful width 250 mm Outer width 305 mm (without motor) Height-adjustable delivery height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable inclination PU belt Color black L Cleats Cleat spacing 500 mm Cleat height 30 mm Belt speed 3 m/min Standard control with emergency stop / stop button Dodpfok Ixlmox Abcscn mobile on steerable stop rollers three-part hopper plates for feed section

Condition: new, New device MASS International Angle conveyor belt NC3 available at short notice Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Outside width 505 mm (without motor) Height adjustable discharge height 750 - 1050 mm Angle between feed section and rising section fixed 45° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section Dcedpek Ixluefx Abcsn

Condition: new, New device MASS International NS3 Speciale Angle conveyor belt with Supergrip belt and separator available at short notice Description: L-conveyor belt with double roller separator Feed section 600 mm Rising section 1300 mm Usable width 450 mm External width 505 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the feed section, as well as in the incline PU belt Black Supergrip Belt speed 3 m / min Dcedpfx Aolrqiujbcen Mobile on steerable stop rollers Side collecting plates in the feed section Double roller separator with covered belt drive Coated with Super Grip Adjustable discharge chute Can be ordered optionally: Belt with FDA approval Other dimensions etc..

Condition: new, New device MASS International Angle conveyor belt NS3 L-conveyor belt / assembly line available at short notice, Description: Feed section 600 mm Rising section 1300 mm Usable width 450 mm Djdpfor A D Ihex Abcocn Outside width 505 mm (without motor) Height adjustable Discharge height 750 - 1050 mm Angle between feed section and rising section adjustable 30 - 50° L - studs Stud height 30 mm Stud spacing 500 mm PU belt Color black Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable stop rollers Side collecting plates in the feed section

Condition: new, New device MASS International Angle conveyor belt NDS 2 L conveyor belt/conveyor belt available at short notice Angle conveyor belt with adjustable angles incl. paddle separator and collecting plates in the feed section Feed section 600 mm Dodjr A D S Espfx Abcecn Rising section 1300 mm Discharge section 800 mm Useful width 350 mm Outside width 405 mm (without motor) Height adjustable Discharge height 700 - 1000 mm Adjustable angles for feed section and discharge section Adjustable incline PU belt Super Grip Belt speed 3 m/min Mobile on steerable stop rollers Side collecting plates in the feed section Paddle separator separately controllable and height adjustable

Condition: new, New device MASS International Model NS1 Angle conveyor belt / L - conveyor belt / assembly line available immediately adjustable angle conveyor belt NS1 with collecting plates in the feed section Description: Feed section 600 mm Rising section 1300 mm Usable width 250 mm Outside width 305 mm (without motor) height adjustable discharge height 750 - 1050 mm Dodeuip Ilopfx Abcscn adjustable angle between feed section and rising section variable inclination adjustable Stud height 30 mm Stud spacing 500 mm belt speed 3 m /min mobile on steerable stop rollers three-part funnel plates for feed section Other angle conveyor belts can be ordered in other dimensions, see list in Figure 4. Dimensions according to customer requirements are no problem.