Used Irmer Mona Compressor for sale (3,696)

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) Isdpfx Ahez Ab A Ajneig - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: like new (used), Year of construction: 2007, power: 5.5 kW (7.48 HP), For sale is a Solid Air piston compressor (2-cylinder version, 5.5 kW, 2007) in excellent, technically flawless condition – including a matching 500 L compressed air tank (2007). A special feature of this compressor: it was used exclusively as an emergency unit, so it has hardly been run. Accordingly, it has very few operating hours and is in almost new condition, both technically and visually. The compressor has always been regularly serviced, is fully functional, has been inspected, and is ready for immediate use. The included 500 L compressed air tank ensures a consistent, pressure-stable air supply and, by reducing the number of switching cycles, also protects the compressor. Technical data: Isdozlhp Uspfx Ahneig - Type: Piston compressor, 2-cylinder - Motor power: 5.5 kW - Compression pressure: 10 bar - Displacement flow rate: 916 l/min - Operating speed: 850 min⁻¹ - Compressed air tank: 500 L (included) - Operating hours: very low (used only as an emergency unit) With our comprehensive all-inclusive package, we will personally take care of the complete service for you – from delivery to the commissioning of your new compressor. This includes unloading, setting up, and aligning the system. Our experienced service technicians will then professionally commission the system, carry out all necessary functional tests, and ensure that your Solid Air compressor, together with the 500 L tank, runs reliably and efficiently. In addition, we offer individual training for your employees so that you can use the system optimally from the start. We will also continue to be available to you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we will ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machines. We place great value on personal support and will be happy to assist you at any time, even after the purchase. In addition, you have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come and see the condition and operation of the system for yourself. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Iodpfxew Rcgte Ahnoig Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: ITJ371074, overall weight: 431 kg, total length: 195 mm, total width: 65 mm, total height: 170 mm, space requirement length: 195 mm, space requirement width: 65 mm, space requirement height: 170 mm, operating pressure: 10 bar, pressure (max.): 10 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, protection type (IP code): IP55, Equipment: documentation/manual, refrigerant dryer, type plate available, Schneider screw compressor 4152009631 - Durable, V-belt driven compressor units - Motor and compressor protection against overheating - With integrated refrigerant dryer / ready-to-use system - Compact dimensions - Low noise due to sound-insulated housing - Integrated direction of rotation control Iiedpjziukyjfx Ahnog The machine was purchased as a replacement unit in 2020 and is new and has not been used to date. The machine has never been used in production and was only stored. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with the exclusion of any warranty for defects in materials and workmanship. Liability for intent, gross negligence, and damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 2017, operating hours: 20,300 h, functionality: fully functional, overall weight: 350 kg, total length: 1,110 mm, total width: 800 mm, total height: 1,110 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 2,970 m³/h, operating pressure: 10 bar, noise level: 65 dB, protection type (IP code): IP55, ALUP Allegro 15 – 15 kW variable speed screw compressor For sale: ALUP Allegro 15 industrial screw compressor with variable speed control. Thanks to the variable speed control, the compressor automatically adjusts its speed to the current compressed air demand. This makes it an energy-efficient solution, especially for fluctuating compressed air consumption. Specifications: Iodez Ahkmepfx Ahneig Manufacturer: ALUP Type: Allegro 15 Power: 15 kW Type: Screw compressor Control: Variable speed / variable speed Control system: ALUP air control 4 Condition: In good working order Professional industrial design Asking price: €4,250.00 (excluding VAT).

Condition: good (used), Year of construction: 2005, operating hours: 50,000 h, functionality: fully functional, overall weight: 850 kg, Equipment: refrigerant dryer, Screw compressor, 22 kW, with built-in refrigerated dryer; disassembled but in good condition. Iiodpfxezb Drxo Ahnsg

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Iedpezudabofx Ahneig Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: excellent (used), Year of construction: 2006, S015361 MANUFACTURER: KAESER TYPE: SK24 SERIAL NUMBER: 1353 YEAR: 2006 POWER (kW): 15 CAPACITY (m3/min): 2.02 PRESSURE (bar): 8 HOURS (RUNNING/TOTAL): 42413 FREQUENCY CONVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no Iisdpfxsz Dgvue Ahnsg COOLED BY (AIR/WATER): air ON-BOARD TANK: no DOCUMENTS: no CONNECTION: 1" NEW/USED: USED

Condition: excellent (used), Year of construction: 2009, PROD. KAESER TYPE ASD47 S/N 1150 YEAR 2009 POWER (kW) 25 CAPACITY (m3/min) 1.07-5.27 PRESSURE (bar) 8.5 Ijdpfx Aoz Dg Hashnoig HOURS (RUNNING/TOTAL) 67466/78928 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: used, Well-maintained firstAIR FAS37 rotary screw air compressor (Eucomp Germany airend, ALMiG Kompressoren GmbH brand). Technical specifications: Iijdpfx Ajz Anybohneg Type: FAS37 (rotary screw compressor) Year of manufacture: 2020 (01/2020) Motor power: 37 kW / 400V / 50Hz Free air delivery: 5.10 m³/min (180 CFM) Max. working pressure: 10 bar (10.5 bar) Net weight: 880 kg Dimensions: 1000×1250×1310 mm Motor: Smotor IE3, three-phase asynchronous, 2955 rpm

Condition: good (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: refrigerant dryer, Almig screw compressor flex 15 Drive (year of manufacture 2004) – including MDX 3600 air dryer (year of manufacture 2011) – well-maintained, inspected, and ready for use. For sale is an Almig screw compressor flex 15 Drive (year of manufacture 2004, 15 kW power) in well-maintained, technically flawless condition – including a matching MDX 3600 air dryer (year of manufacture 2011). The compressor has been regularly maintained and is in very good condition both visually and technically. It is fully functional, inspected, and ready for immediate use. The included MDX 3600 air dryer reliably provides dry, clean compressed air, thus protecting your downstream equipment and tools. With our comprehensive all-inclusive package, we can personally take care of the complete service for you – from delivery to commissioning of your new compressor. This includes unloading, installing, and aligning the system. Subsequently, our experienced service technicians will professionally commission the system, perform all necessary functional tests, and ensure that your Almig flex 15 Drive, together with the MDX 3600 air dryer, runs reliably and efficiently. In addition, we offer individual training sessions for your employees so that you can optimally utilize the system from the very beginning. We will also be happy to continue to support you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Iisdpfxjzlgmfj Ahnjg Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machinery. We place great emphasis on personal support and are always happy to assist you even after the purchase. You also have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come to our location and see for yourself the condition and functionality. With us, you are in the best hands – professionally, reliably, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: used, Year of construction: 2015, operating hours: 49,800 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 9.8 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Product description: Atlas Copco GA75FF A 10 APB 400 50 Product number: 0000090580 | 00000502 | 8153587723 Date of manufacture: 03/19/2015 Maximum permissible operating pressure: 9.75 bar Volume flow: 190.5 l/s or 11.43 m³/min Brand: Atlas Copco Brand: Atlas Copco (01ATLAS_CO) Commercial power: 75 kW (75KW) Cooling: Air cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Ijdpezvqpfofx Ahnsig Frequency: 50 Hz (50HZ) Integrated dryer: Yes (Y) Mk5 expansion module: Yes (Y) Model variant: Workplace Full Feature (W_FF) Regulation: Elektronikon standard (MK5STD) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Already equipped with the following special equipment as standard: - Integrated cooling dryer - Integrated heat recovery - Expansion module Current operating hours: approx. 49,800 hours Functional, no backlog of maintenance or repairs, last maintenance at 48,600 operating hours in 12/2025 Used machine, no warranty

Condition: used, Screw Air Compressor with Integrated Dryer Power: 37 kW (Variable Speed Drive) Manufacturer: ALMiG (Germany, since 1923) Model: ALUB blue S plus / Variable Drive, AirControl P Premium controller Iijdpfsz Anrkjx Ahnsg Year: 2013

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Ijdpfx Aezzbyfjhnjig Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support.

Condition: excellent (used), Year of construction: 2012, operating hours: 5,735 h, functionality: fully functional, power: 90 kW (122.37 HP), volume flow: 840 m³/h, pressure (max.): 7.5 bar, type of cooling: water, Oil-free screw compressor, Atlas Copco ZR90 90 kW 7.50 bar 14 m3/min Year of manufacture: 2012 Iijdszqvvaspfx Ahnog Operating hours: 5735

Year of construction: 2008, condition: used, Receiver capacity 90 l 750 L/min Motor output 4,0 kW Ijdpfx Asz Dkzzshnoig Used Machine Year of Manufacture: 2008 Features and Technical Specifications: - Motor Connection: 400 V - Motor Power: 4.0 kW - Tank capacity: 90 L - Suction capacity: 750 L/min - Effective flow rate: 560 L/min - Cylinders: 2 - Speed: 1,450 rpm - Max. pressure: 11 bar - Weight: approx. 103 kg

Condition: used, Year of construction: 2005, operating hours: 39,119 h, functionality: unexamined, Equipment: refrigerant dryer, KAESER AIRTOWER 6 with Aquamat 2 Oil-Water Separator Under the name Kaeser Airtower 6 (often based on the SX 6 compressor stage), Kaeser offers a compact, ready-to-connect compressed air station that consists of a screw compressor and an integrated refrigeration dryer. Performance Data & Function Motor Power: 4.0 kW Flow rate (Delivery rate): At 8 bar operating pressure: approx. 0.49 m³/min (490 l/min) At 11 bar operating pressure: approx. 0.37 m³/min (370 l/min) Integrated refrigerated dryer function: Provides dry compressed air directly from the station (dew point +3 °C) Control: Equipped with the electronic monitoring system, Sigma Control. Ijdpfx Asz Abp Ashnjig The KAESER AQUAMAT 2 is a classic oil-water separator for legally compliant treatment of compressed air condensate from compressor systems.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Iiedpjzzp N Iofx Ahnsg Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Volume flow: 3455 dm³/min Ijdpfx Ahjxygblonoig Motor power: 22 kW

Condition: used, Bitzer compressor rack chiller -Type: 2 x HSK 6461-60, 2 x HSK 7451-70 -Volume: 2 x 165 m³/h, 2 x 192 m³/h -Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C -Dimensions: 4300 x 1200 x 1500 mm Iodpfjy Sk Ntsx Ahneig -Stock quantity: 1

Year of construction: 2015, condition: used, Used Machine Year of Manufacture: 2015 with refrigerated dryer Features and Technical Specifications: - Pressure: 10 bar - Suction capacity: 660 l/min - Speed: 1025 rpm - Tank volume: 270 l - Noise level: 78 dB(A) - Effective flow rate: 520 l/min - Air outlet: 3/4"i - Drive power: 4 kW - Air intake capacity: 660 (l/min) - Drive type: V-belt - Tank design: vertical - Power (kW): 4.0 - Voltage (V): 400 V - Starting method: Direct-on-line (DOL) - Compression type: 2-stage - Dimensions: 750x705x1800 mm - Weight: 170 kg With DK 985 Eco refrigeration dryer: Iedszk Nqkopfx Ahnsig - Airflow at pressure dew point 3 °C: 600 l/min - Power consumption: 0.3 kW - Pressure drop: 0.25 bar - Voltage: 230 V - With automatic condensate drain - Dimensions: 325 x 263 x 745 mm - Weight: 25 kg Availability: available shortly Storage location: DE-63934 Röllbach

Condition: new, PROD. ATLASCOPCO TYPE G11FF S/N ITJ1078585 YEAR 2026 POWER (kW) 11 CAPACITY (m3/min) 1.51 PRESSURE (bar) 9.75 HOURS (RUNNING/TOTAL) 0 INVERTER no BUILT-IN DRYER yes, R513a 0.5kg Isdpfx Ahoz Diquensig HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK yes, 500 L DOCUMENTS yes CONNECTION 1 NEW/USED NEW

Condition: excellent (used), High-quality RENNER industrial piston air compressor, manufactured in Germany, complete with 270 L air receiver and RENNER RKT+ 0035 refrigerated air dryer. Ideal for woodworking shops, CNC machines, automotive workshops and industrial applications requiring clean, dry compressed air. Specifications • Brand: RENNER Kompressoren • Year: 2019 • Air receiver: 270 Litres • Maximum pressure: 11 Bar • Motor: WEG W22 Premium IE3 • Motor power: 4 kW (5.5 HP) • Power supply: 380–400 V, 3 Phase • Integrated refrigerated air dryer: RENNER RKT+ 0035 • Made in Germany The RKT+ 0035 dryer provides compressed air drying with an airflow of up to 0.58 m³/min (35 m³/h) and is designed specifically for RENNER compressor installations. Condition • Complete unit. • Good working condition. • Ready for immediate use. • Inspection and testing are welcome. Iedpezmub Tjfx Ahnoig

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition!!! The electronics have been completely replaced!!! Only 2029 operating hours. For sale due to downsizing of the machine park!!!!...Completely overhauled, including filter replacement. Iijdpfxsz Ah Uxj Ahneg

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Permissible maximum operating pressure: 10 bar Volume flow: 184.1 l/s or 11.05 m³/min Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Iisdpozvqp Sofx Ahnjg Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Equipped ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours The compressor is functional. It has no outstanding maintenance or repairs. The last maintenance, according to the manufacturer's specifications, was performed in 02/2026 at 70,500 operating hours. The compressor was overhauled in 2018 at 33,000 operating hours and received a new compressor element. Used machine, sold as is, without warranty.