Used Irmer Mona Compressor for sale (3,722)

Condition: excellent (used), Year of construction: 2015, RENNER RSF2-45 screw compressor, equipped with a frequency converter and heat exchanger, recently serviced. Fpjdpfx Aezgdf Usatol Technical data: capacity: 6.83 m3/min (6830/min); engine power: 55 kW; pressure: 10 bar; Year: 2015 operating hours: 9691 h net price: 19200 gross price: 23616 Compressor in fully working condition. Service support provided.

Condition: as good as new (ex-display), operating hours: 39 h, power: 7.5 kW (10.20 HP), Elmag Profi-Line SILENT piston compressor PL-S 1100/10/270 - Compact unit incl. automatic condensate drain with connection accessories - Effective delivery rate 806 l/min - Suction capacity 1074 l/min - Max. Max. operating pressure 10 bar - Oil-lubricated Yes - Tank volume 270 l - Rated motor power 7.5 / 10 kW / PS Fpedpfeu Nhh Tjx Aatel - Electrical connection Voltage / frequency 400/50 V/Hz - Sound pressure level (4 m) 68 dB(A) - Compressor speed 1000 rpm - Air outlet 1/2 inch - Length 1520 mm - Height 1530 mm - Weight 291 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, operating pressure: 10 bar, Compressor system consisting of: Screw compressor: Atlas Copco GA11VSD+ Refrigeration dryer: Atlas Copco FD70 Pressure accumulator Öwamat 4 Oil-injected screw compressor with variable speed control Max. operating pressure: 10.0 bar Fpsdpfevu A Hdsx Aatjl Engine power: 11 kW Volume flow: 25.5-115.2 m³/h Control hours: 61,837 h Operating hours: 21,094 h Engine starts: 267,928 Load cycles: 315,576

Condition: new, volume flow: 1,994 m³/h, noise level: 67 dB, type of cooling: air, pressure: 10 bar, type of input current: three-phase, tank capacity: 500 l, Equipment: documentation/manual, Atlas Copco G15FF screw compressor, brand NEW! Specification: • capacity at 7.5 bar 1994 l/min • capacity at 10 bar 1740 l/min • main engine power 15.0 kW • 500 l tank • maximum operating pressure 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Additional information: • the photos shown show the actual condition of the item for sale Fjdpfx Ajq E Iraoatepl • possibility of switching on and checking the device on site. • meets CE standards • operating instructions in Polish and a complete set of documents for UDT • possibility of obtaining a manufacturer's warranty • available immediately or within 7 working days

Condition: good (used), For sale: a mobile Atlas Copco XAS 60 screw compressor with a Deutz F2L 511 diesel engine. The unit has only 613 operating hours since new. The engine is in very good condition – it starts easily and runs properly. The compressor was imported from Germany. It has not been used for about fifteen years, and the compressor's screw element has seized. We attempted to repair it, and the unit was reassembled, but it currently only generates a pressure of approximately 4 bar. For this reason, it is being sold as damaged, for further repair. It may be an interesting proposition for someone who will undertake the repair of the compressor, or as a source of parts, especially the well-maintained Deutz F2L 511 engine. Engine data: Fpsdszv Ei Hjpfx Aatol * Manufacturer: Deutz * Type: F2L 511 * Power: 25 kW / 34 HP * Speed: 2800 rpm * Operating hours: 613 hours * Engine is functional, starts and runs properly The visual condition is appropriate for the age of the unit – visible signs of use, storage, and localized corrosion.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, KAESER SM12T screw compressor with air dryer, recently serviced. Technical specifications: Capacity: 1.20 m3/min (1200/min); Engine power: 7.5 kW; Pressure: 8 bar; Operating hours: 4129 h; Year: 2014; Net price: 14,600 PLN; Gross price: 17,958 PLN. Fpsdpozcm Sksfx Aatsl The compressor is in full working order, and we provide service support.

Condition: excellent (used), Year of construction: 2008, For sale: Atlas Copco GA90 rotary screw compressor, year 2008. The unit is in full working order, well-maintained, and has been serviced regularly. Ready for operation, ideal for industrial and production applications. Technical data: - Manufacturer: Atlas Copco - Model: GA90 - Year of manufacture: 2008 - Type: rotary screw compressor - Motor power: 90 kW - Operating pressure: 7.5–13 bar (depending on setting) - Output: approx. 15–16 m³/min - Condition: used, very good - Power supply: 400V Advantages: - Reputable Atlas Copco brand – reliability and durability - Fully functional, serviced, ready for immediate use - High performance – ideal for large industrial plants - On-site inspection possible Fpsdjyggtijpfx Aatjl

Condition: like new (used), Year of construction: 2018, operating hours: 3,769 h, Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Fpedpfx Aasy T Icgjtol Price: 5000.-

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Fpjdpfx Asttucgoatel Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 Fedpfsvyrq Aox Aatepl 1998 Characteristics: Capacity 7.50 bar Power 245 kW Voltage 500 V

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 156694, total length: 1,200 mm, total width: 850 mm, total height: 1,100 mm, motor manufacturer: Sabroe, volume flow: 339 m³/h, Used Sabroe SMC 106 S reciprocating compressor for Freon. Complete with pressure switches/gauges and sight glass. The compressor has a displacement of 339 m³/h. Specifications Brand: Sabroe Fsdpfjx Ap Nksx Aatspl Model: SMC 106 S Refrigerant: Freon Displacement: 339 m³/h Year of manufacture: 2015 Weight: 925 kg Dimensions: 1200x850x1100 mm (LxWxH) Performance: (0ºC/+35ºC) – 308 kW (-10ºC/+35ºC) – 197 kW

Condition: excellent (used), Year of construction: 2010, PROD. ATLASCOPCO TYPE S/N API461445 YEAR 2010 POWER (kW) 22 CAPACITY (m3/min) 3.61 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no Fsdpfx Aaezi T Dxstepl EXCHANGER no COOLED (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no Fpodpfozq Aluox Aatel CONNECTION 1 1/2' NEW/USED USED

Condition: excellent (used), Year of construction: 2014, PROD. ATLASCOPCO TYPE GA160VSDFF S/N APF195117 YEAR 2014 POWER (kW) 186 CAPACITY (m3/min) 4.82-26.70 DISCHARGE PRESSURE (bar) 8.3 HOURS (RUNNING/TOTAL) 67773 FREQUENCY CONVERTER yes BUILT-IN DRYER yes AFTERCOOLER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no Fpodozl S Smopfx Aatjl CONNECTION 3 NEW/USED USED

Condition: used, Year of construction: 2007, ABAC Genesis 7.508 Air Compressor on Air Receiver Tank Working Pressure 8 Bar, Free Air Delivery 1.2m3/min, Power 7.5kW, Weight 390kg, Air Receiver Tank Cap 272 litres. S/No. 304263 001 (2007), Total Hours 7240, on Load 983. Country of Origin: Italy Fsdpfx Aajzn Uvtstspl Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: refrigerant dryer, Almig screw compressor flex 15 Drive (year of manufacture 2004) – including MDX 3600 air dryer (year of manufacture 2011) – well-maintained, inspected, and ready for use. For sale is an Almig screw compressor flex 15 Drive (year of manufacture 2004, 15 kW power) in well-maintained, technically flawless condition – including a matching MDX 3600 air dryer (year of manufacture 2011). The compressor has been regularly maintained and is in very good condition both visually and technically. It is fully functional, inspected, and ready for immediate use. The included MDX 3600 air dryer reliably provides dry, clean compressed air, thus protecting your downstream equipment and tools. With our comprehensive all-inclusive package, we can personally take care of the complete service for you – from delivery to commissioning of your new compressor. This includes unloading, installing, and aligning the system. Subsequently, our experienced service technicians will professionally commission the system, perform all necessary functional tests, and ensure that your Almig flex 15 Drive, together with the MDX 3600 air dryer, runs reliably and efficiently. In addition, we offer individual training sessions for your employees so that you can optimally utilize the system from the very beginning. We will also be happy to continue to support you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machinery. We place great emphasis on personal support and are always happy to assist you even after the purchase. You also have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come to our location and see for yourself the condition and functionality. With us, you are in the best hands – professionally, reliably, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG Fjdpfx Aezlgmfeatepl All information without guarantee.

Condition: excellent (used), Year of construction: 2006, Kaeser, 15 kW, 8 bar. Fpsdpeztb Tvofx Aatsl

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Fpjdex Uwtdspfx Aatol Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: good (used), overall weight: 5,100 kg, fuel type: diesel, fuel: diesel, Year of construction: 2005, PROD - ATLASCOPCO TYPE - XAS426 S/N - YA3-062854-50542371 YEAR - 2005 POWER (kW) - 166 PUMP. (m3/min) - 25 CIS (bar) - 7 Fjdpfx Aot Srw Aoatspl

Condition: good (used), Year of construction: 2018, Screw compressor BLITZ Monsun Fast 11-10, serial number iYD0099288, manufactured in 2018, output 11 kW, maximum pressure 10 bar. Fpodpfx Ajztcyqjatjl

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Fsdpfx Aaezh Nizetjpl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO GA26VSD+ screw compressor, equipped with a frequency converter, recently serviced. Technical specifications: Capacity: 5.15 m3/min; Engine power: 26 kW; Maximum pressure: 13 bar; Year: 2015; Fpsdpfxsy Idhnj Aatjl Operating hours: 9845 h. Price: 30,900 net. Price: 38,007 gross. The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support. Link to video below.

Condition: good (used), For sale: Fpjdpsua Dqiefx Aatsl - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: used, Year of construction: 2010, machine/vehicle number: 00100060311, Item No. 26090 Technical data: - Design: vertical - Max. operating pressure: 10 bar - Pressure vessel capacity: 270 l - Suction volume: 585 l/min - Delivery rate: 440 l/min - Compressor speed: 1200 rpm - Drive: 400 V / 4.0 kW Fjdpfxezd T S Ee Aatspl - Boiler diameter, approx.: 600 mm - Space requirement, approx.: W 800 x H 1850 x D 900 mm - Weight, approx.: 150 kg

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) Fsdpoy T Ibvofx Aatepl • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-