Used Italy for sale (1,405)

Condition: good (used), Code: 0242 Dsdpfx Agexykwkj Rekg Brand: MVM - ITALY Model: T 1500 - CE Standard Professional wood turning lathe with copying device for wood, plaster, composite materials and various - CE Standard Technical data: Single-phase motor 220 Volt - Kw 2,5 Copying device: the copying device is a unit mounted on the rear bench. It can reproduce weather with wooden samples or with metallic templates thanks to its modern view. It is a practical and manageable tool, it permits large time saving, in batch production or mass production, too. The feed is given by a confortable wheel rotation, the wheel is mounted on the machine fore side Distance between centres mm 1500 Height of centre mm 220 Tool support Spindle revolutions 4 speeds Spindle cone n° 2 Counter centre n° 3 Overall dimensions mm 2350 x 650 x 1200 h Weight kg 325

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 990 mm, rotor width: 650 mm, power: 110 kW (149.56 HP), For sale P.R.T. (Italian) Water Grinder used for shredding polyethylene film. 5x2 rotating knife 2x2 stationary knife. In good condition. With 110 Kw electric motor. Throughput 400-600 kg/h Rotor dimension W 650 x L 990 mm Please check our other machines (extruder, chiller, shredder...) Dodpfx Aox Rp S Rjg Rekg

Condition: ready for operation (used), Tripple effect evaporator Italian Brand Dksdpfxox Dc Nye Ag Rsg Very good Tripple effect evaporator 300 Ton/day including all pumps , pressure level transmitter, in line Brix Meter, Full automation PLC + Condensor + Big Colling tower 3 turbo Fan total 45 hp with all necessary tubes and cables most peripheral is new . Warranty one year . If needed sorting line and hammer , CB & Hb is also available if needed

Condition: ready for operation (used), Year of construction: 2022, General Data Measurements width 2300 mm Measurements depth 4000 mm Measurements height 1800 mm Machine weight 2000 kg This Waterjet Italy WL510 was manufactured in 2022. It's a waterjet cutting machine designed for precision in cutting a wide range of materials. Ideal for industries requiring detailed and accurate cutting work. Contact us for more information. Dkjdox D E R Hjpfx Ag Rjg Application Types Cutting

Condition: new, Year of construction: 2025, Working width: 600 mm Working height: 300 mm Minimum workpiece length: 250 mm Units: 2 brush units, centrally adjustable electrically with fine offset adjustment 1st brush: Metal brush, diameter 210 mm 2nd brush: Tynex brush, grit 80, diameter 210 mm Height adjustment: electric Dkedpfx Agexwnilj Reg Height display: mechanical counter Feed speed: 4 - 12 m/min Brush motor power: 2 x 4 kW Feed motor power: 0.37 kW Machine length: Machine width: Weight:

Year of construction: 2002, condition: like new (used), 28 T/D capacity Dkodpfx Agjid Syio Rsg

Condition: good (used), Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scoring blade motor 2,5 Hp (1.8 Kw) Scoring unit rotating speed 5000 rpm Dkjdpew Dfnhofx Ag Rsg Scoring unit blade diameter 220-300 mm Saw carriage forward speed 0-60 m/1' Saw carriage return speed 40-70 m/1' Positioner speed 0-25 m/1' Positioner return speed 40-60 m/1' Weight 2000 kg

Condition: used, Year of construction: 2003, functionality: fully functional, rotor length: 1,100 mm, For sale P.R.T. shredder used for pre-shredding polyethylene. Italian manufacturer. In good condition. Without standing knives. With hydro drive and with electric control cabinet and stand. Shredder dimension LxWxH 2550 x 1200 x 2460 mm Dksdpfx Agsx Rqacs Rog Stand dimension LxWxH 2450 x 1680 x 2700 mm Drive dimension LxWxH 1600 x 1200 x 1300 mm Rotor dimension LxW 1100x700 mm Please check our other machines for sale. (Extruder, grinder, chiller, washing line...)

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Type: TR 210 Overall dimensions: Width: 950 mm Depth: 950 mm Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm Dedpfx Aoxxk H Ajg Rjkg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,209 h, General Data Machine weight 3000 kg Measurements height 1800 mm Measurements depth 2300 mm Dkjdpfsx Enidex Ag Rsg Dimensions Machine Length 4500 mm Main Drive Number of axis 3 Movement X-Axis Movement 3400 mm Z-Axis Movement 200 mm Y-Axis Movement 1800 mm This 3-axis Waterjet Italy CLASSICA CL 510 was manufactured in 2011, featuring a cutting area with dimensions of 3400 mm by 1800 mm and a Z-axis height of 200 mm. It includes a high-pressure KMT SL-V pump and an ESA S510 controller. If you are looking to get high-quality cutting capabilities, consider the Waterjet Italy CLASSICA CL 510 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, PAVAN, Italy PASTA PRODUCTION PLANT, CONSISTING OF: 1. SPAGHETTI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1989 Control: CNC Specification Capacity 1250 kg/h Water consumption 400 l/h Overall dimensions L×W×H 48×7×7 m Line is consisting of Small mixer Large mixer Screw Djdpoxz Hm Rjfx Ag Rskg Pre-dryer Dryer ROTOTHERM®, completely overhauled and retrofitted “Night” store Foil packing machine Carton box packing machine 2. NEST PASTA LINE Manufacturer: PAVAN, Italy Year of manufacture: 1962 Control: PLC Specification Capacity 300 kg Water consumption 100 l/h Overall dimensions L×W×H 42×5×5 m Line is consisting of TRABATO press Pre-dryer Dryer Foil packing machine 3. MACARONI LINE Manufacturer: PAVAN, Italy Year of manufacture: 1970 Control: Conventional + PLC Specification Capacity 850 kg/h Water consumption 280 l/h Overall dimensions L×W×H 30×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine 4. COUSCOUS LINE Manufacturer: PAVAN, Italy Year of manufacture: 1960 Control: Conventional + PLC Specification Capacity 200 kg/h Water consumption 70 l/h Overall dimensions L×W×H 40×5×5 m Line is consisting of TRABATO press Elevators Pre-dryer Dryer Collection hopper Foil packing machine ----- All the lines are in very good used condition, full working order, still in use and visible under power. More pictures and videos available on request.

Condition: new, Year of construction: 2023, New cast epoxy resin dry distribution 3 phase transformer manufactured by SEA Italy, 800kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked. Dkjdpfendn Hrjx Ag Rog

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning Dedpfx Ajv A Ta Dsg Rjkg N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: new, Year of construction: 2023, Cast resin, epoxy dry distribution 3 phase transformer manufactured by TESAR Italy, 1 pc 1000kVA, 6000 ( ± 2 x 2,5 %) /400V; Dyn1/Dyn5/Dyn11, IP00, year of production 2023, ecodesign 2, project documentation and rutine protocol, manuals, unpacked, 2 years warranty. Dksdpsl Tm Uvjfx Ag Rog

Condition: good (used), Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Dkodpsx Ihulefx Ag Rjg Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250

Condition: used, Year of construction: 2001, Cast resin epoxy distribution transformer 630kVA manufactured by TESAR Italy, voltage ratio 10000 ( ± 2 x 2,5 %) /400V, Dyn5 or Dyn11 or Dyn1, IP23 or IP00, forced cooling AF, conductor Al/Al, temperature monitoring unit, functional,available 2 pcs. Dksdpfx Agoquwtxo Rog

Condition: good (used), Code: 0042 Brand: FRAVOL - ITALY Model: A 16 ACR - CE Standard Edge bander for pre-glued edges with trimming unit for straight and curved panels - CE Standard Djdev Ay Hkspfx Ag Rjkg Technical data Min/max panel height mm 10/60 Feed speed mt/min 3,8 Temperature regulator 0-500° Voltage 220 Installed power 3700 Watt Upper/lower trimming unit Overall dimensions mm 950 x 600 x 1000 h Weight kg 120

Condition: like new (used), Year of construction: 2015, furncace oil 3-phase transformer with series reactor - manufacturer TES Italy, 5122-10000kVA; 22000/210-410-450V; OFWF; OLTC; Yd(open); year 2015; very good condition - unused, complete electrical documentation. Dedpfx Agjwm Rz Sj Rskg

Condition: good (used), Code: 0035 Brand: MARTIN - ITALY Model: EURO 3 Dsdjvz A Eyepfx Ag Rskg Galvanized sheet metal covered dust collector with filter sleeves for wood, paint and various Technical data: Motor power Hp 3 N° 24 filter sleeves N° 3 collection bags diameter mm 500 Suction port diameter mm 400 Electrical panel Overall dimensions of mounted dust collector mm 2300 x 1000 x 4100 h Overall dimensions for transport mm 4100 x 2300 x 1000 h

Condition: good (used), Code: 0351 Brand: CABO - ITALY Model: 3200 Automatic double end tenoner with tilting blade and scoring unit for panels, furniture, custom-made furniture, kitchens, composite materials, aluminium, acoustic panels Technical data Maximum cutting width mm 3200 Maximum cutting length mm 3200 Minimum distance between blades mm 300 Dkedpfx Aex Hi Iwog Reg Maximum cutting height mm 100 Maximum diameter of blades mm 300 Maximum diameter of scoring unit mm 200 Blades inclination 0-45° Blade motor power Hp 5 each Automatic feed carriage with variable speed Automatic opening between blades Scoring motor power Hp 1 each Pneumatic workpiece clamping Overall dimensions of assembled machine: mm 4200 x 4500 x 1200 h Overall dimensions for transport: mm 4500 x 300 x 1000 h + mm 4200 x 1100 x 1000 h Weight kg 1700

Condition: good (used), Code: 0642 Brand: FBR - ITALY Model: L/93 - CE Standard Belt sanding machine with double goose neck for wood, metal, aluminium, composite materials and various - FBR - ITALIA L/93 - CE Standard Table length mm 3000 Table width mm 800 2 speed motor - Power Hp 3/4 Belt length max mm 7800 Belt width mm 120 Dodpjx Dk Hyjfx Ag Rokg Automatic belt lifting Pulley diameter mm 200 Suction motor Hp 1 Suction connection diameter mm 120 Weight kg 680

Condition: good (used), Code: 0253 Brand: LARI E LARI - ITALY Model: FR 20 - TA - CE Standard Working center for milling and boring on wood or plastic and composite materials, wooden doors, window frames - CE Standard Technical data: X-axis working stroke 3250 mm Y-axis working stroke with 90° cutter 130 mm Z-axis working stroke with 0° cutter 290 mm Dkedsx A Hdxjpfx Ag Rsg Z-axis working stroke with 90° cutter 175 mm X-axis working speed mt/min 40 Y-axis working speed mt/min 30 Z-axis working speed mt/min 30 Hinge boring inserting unit: Male/Female Speed control inverter Probe Tool holder collet ER 25 Power of anuba head drilling electric spindle 2,2 Kw Anuba head inclination -10 +90° Electric spindle for milling: 2,7 Hp at 18,000 rpm Collet chuck ER 32 Variable speed via inverter Inclination from 0 to 90° for both vertical and horizontal machining Machine computer: numerical control - Windows XP operating system - color video - alphanumeric keyboard - USB port - interpolation Work table with 3 sliding clamps for locking workpieces Installed power 12 Kw Suction mouth diameter 120 mm Compressed air 7-8 bar Overall dimensions for transport mm 4100 x 1500 x 2100 h Machine weight 1400 kg Electrical panel 250 kg

Condition: good (used), Code: 0037 Brand: OMC - ITALY Model: PL/CONVERSION-S - CE Standard Membrane press with loading on the front side - CE Standard Multifunctional air membrane press, allows extreme versatility in one machine only of all types of finishing of the panel It can be operated as: Cold press Hot press Membrane press for Pvc coating or veneer of shaped panels form one side only Membrane press for Pvc coating or veneer of indentations in the wood Technical data: Work platens dimensions 2500 x 1300 mm Perforated steel platens Dkjdpsv Ab Dwsfx Ag Rog Useful tank dimensions 2350 x 1180 x 50 mm N° 10 pistons - stroke mm 400 Pressure kg/cm2 6.5 Overall dimensions mm 3200 x 1800 x 2700 Weight kg 8000

Condition: good (used), Code: 0214 Brand: SICMA - ITALY Model: DT 530 Surface planer for carpentry, wood elements, plastics, composite materials, and various other materials Technical data: Work table width mm 530 Work table length mm 2900 4 knives cutterblock Shaft rpm 5000 Fence dimensions mm 1200 x 200 tilting up to 45° Motor power Hp 5,5 Dsdpfxjx Akgqj Ag Rekg Overall dimensions mm 2900 x 900 x 1050 h Weight kg 820

Condition: good (used), Code: 0243 Brand: FBR - ITALY Model: L 85/2000 - CE Standard Automatic belt sanding machine with double goose neck for wood, carpentry, paints, metals, aluminum, composite materials, and various other materials - CE Standard Technical data Table length 1950 mm Table width 700 mm Vertical stroke 750 mm Transversal stroke 700 mm Max belt length 5600 mm Max belt width 150 mm Three-phase belt motor 3 Hp Table lifting motor 0,5 Hp Pulley diameter 200 mm Guide on table Dkedpfx Agsxy Sl Nj Reg Suction inlet diameter 150 mm Overall dimensions mm 2900 x 1000 x 1500 h Weight kg 320