Used Edge for sale (4,772)

Condition: excellent (used), Year of construction: 2019, operating hours: 4,733 h, functionality: fully functional, fuel: diesel, Three fraction air separator + additional suction fan for midfraction. One owner machine. Psdjv Aailspfx Ab Isrd

Condition: like new (used), Several pieces in stock Solar inverter, Inverter 5 kW, SolarEdge SE5K-RW0TEBEN4 Manufacturer: SolarEdge Pedpfxoxukbxs Ab Isrd Type: SE5K-RW0TEBEN4 Overall dimensions: 310 x 180 x 530 mm Built-in webserver with Ethernet connection for remote monitoring SetApp version – only the Wi-Fi antenna kit is required for communication High efficiency (max. 97.3%) Fixed conversion voltage Indoor and outdoor use (high protection class IP65) SmartGrid compatible Factory-installed MC4 connectors on the inverter 12-year manufacturer warranty, extendable up to 25 years for an extra fee Attention! The inverter operates only with SolarEdge-compatible smart modules or additional Optimizers! AC power

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 14,000 mm, total length: 17,420 mm, total width: 14,000 mm, total height: 4,850 mm, overall weight: 37,000 kg, New scalping screen available from stock. Edge S18 Dual Power. Prjdpfsv A S Nkox Ab Ijd See brochure with all (technical) details. Shaking sieve, scalping screen, vorsieb

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift truck Condition: As good as new Technical condition: New Front tires type: Polyurethane Rear tires type: Polyurethane Podpfovzzl Esx Ab Ijrd Support rollers, lithium-ion battery, 12 month guarantee

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, workpiece height (max.): 50 mm, workpiece length (max.): 200 mm, workpiece width (max.): 2,500 mm, rotational speed (max.): 18,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Panel width max.: 2,500 mm Panel width min.: 130 mm Panel height max.: 50 mm Panel height min.: 8 mm Panel length max.: 200 mm Panel length min.: 30 mm UNITS Sizing unit Unit: Trimming Unit: Corrections automatic engagement based on timer Motor power: 2.2 kW Pjdpfexxavtjx Ab Ierd Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Prefuser for polyurethane adhesive D4-e Edge pressure roller track Number of pressure rollers: 4 Edge processing unit 1 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 2 Unit: Top router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge processing unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge processing unit 4 Unit: Brush Number of motors: 2 Edge processing unit 5 Unit: Top router Number of motors: 1 Edge processing unit 6 Unit: Top router Number of motors: 1 MACHINE DETAILS Installed total power: 12 kW Adhesive system: PUR Pressure type: rubber-coated belts Number of units installed in sizing: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/003306, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, workpiece width (max.): 3,200 mm, TECHNICAL DETAILS Mobile shoulder opening: 3,200 mm Maximum panel width: 3,200 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Edge thickness (coil), minimum PVC-ABS: 0.3 mm Edge thickness (coil), maximum PVC-ABS: 3 mm Feed speed: 10 - 40 m/min Distance between retractable pins: 500 mm EQUIPMENT Motorized pressure rubber belt Support track with retractable pins CNI control unit in a separate control cabinet Rectifier unit with two motors (one for each side) Glue application unit with EVA glue premelter Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapping trimming group Staggered finishing unit with two motors Corner rounding unit with 4 motors Milling unit tiltable 0-90° Edge scraping unit Pjdpfx Aboxx N D Ho Isrd Brushing group

Condition: excellent (used), Tabletop Edge Bander JAROMA + Edge Trimmer with Cutting Unit Catalog No. 7729A Edge Bander Equipment: - Band plate Predpfjxa Eh Dsx Ab Ied - Glue tank (granulate) - Tape feeder - Guillotine – preliminary trimming of edging - Pressure rollers: 2 pcs - Min. width of workpieces: 50 mm - Thickness of workpieces: 10–40 mm - Min. internal radius: 50 mm - Edging at an angle with 1 mm thick tape: 0–45° - Edge thickness: 0.3–3 mm - Electric feed - Total power: 2 kW - Compressed air pressure: 6–7 bar - Dimensions (L/W/H): 1700x1300x1550 mm - Weight: 310 kg Edge Trimmer: - Min. width of workpieces: 50 mm - Thickness of workpieces: 16–40 mm - Edge thickness: 0.5–3 mm - Motor power: 1.1 kW - Air requirement: 6 bar - Extraction nozzle: 60 mm - Dimensions (L/W/H): 1900x850x1450 mm - Weight: 290 kg Cutting Unit: - Blade diameter: 150 mm - Table dimensions: 750x820 mm - Motor power: 0.12 kW / 2800 rpm – Polish manufacture – Unpainted – DTR documentation – Very good condition – Used edge bander Net price: 11,000 PLN Net price: 2,620 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Edge Sander Samco Unilev 200 Sanding height: 200 mm Two belt speeds Adjustable shoe Table adjustable from 0–30 degrees Adjustable sanding height Pneumatic sanding belt tensioning Pedpfx Asxyww Reb Iord Sanding belt oscillation Additional units adjustable at an angle Motor power: 2/3 kW

Condition: used, Year of construction: 2008, IDM Level HD is an industrial single-sided edgebanding center designed for edge processing in standard furniture manufacturing. The HD model features a more robust construction, making it suitable wherever consistent edge quality is required at higher feed speeds. This machine enables complete workpiece processing in a single pass—from pre-milling and adhesive application to the final edge refinement. Owing to its modular arrangement of working units, the machine can process ABS/PVC edges as well as veneer. The machine is pre-owned, fully cleaned, inspected, and ready for installation. Technical specification: • Pre-milling unit: 2 counter-rotating motors to trim the leading edge before edgebanding • Gluing unit: EVA glue pot, electronic temperature control • Pressure zone: main pressure roller + additional pressure rollers Podsxztmdspfx Ab Isrd • End trimming saws: 2 motors, clean trimming of edge ends • Top and bottom trimming units: profiling, precise trimming of ABS/PVC edge • Front corner rounding unit: radius machining of panel corners • Rear corner rounding unit: finishing of corners at workpiece outfeed • Radius scrapers: final smoothing of edge radius • Flat scrapers: finishing of edge surfaces • Buffing unit: 2 discs for final polishing of the edge • Complete extraction system: connection points for all working units • Pneumatic pressures and adjustments: secure workpiece hold and precise regulation • Manual fine adjustment: analog readout wheels and micrometric adjustments for precision set-up

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse Prjdpfx Aoxlz Nzob Ied

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, feed rate X-axis: 20 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 20 m/min Pjdpfx Absxxauce Ijrd Panel height min.: 8 mm Panel height max.: 60 mm Panel length min.: 150 mm Panel width min.: 65 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Pre-cutting unit Unit: Corrections Edge pre-heating lamps Glue application system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller track Number of pressure rollers: 6 End trimming unit Model: 08.415 Number of motors: 2 Motor power: 0.66 kW Max. speed: 12,000 rpm Top/bottom trimming unit Model: 08.0555 Number of motors: 2 Motor power: 1 kW Multifunctional unit Model: SKF-L Number of motors: 4 Max. machining speed: 20 m/min Motor power: 0.18 + 0.400 kW Speed: 12,000 rpm Edge scraping unit Model: 08.519 Glue scraping unit Model: 08.521 Buffing unit Model: 08.617-2 Number of motors: 2 Motor power: 0.18 kW MACHINE DETAILS Number of operating units: 8 Adhesive system: PUR Control system: WINDOWS EQUIPMENT Programming software for the machine: ICOS open TS CE marking

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: AH/105752, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, control type: PLC-controlled, TECHNICAL DETAILS Panel height: 10–60 mm Solid wood: 15 mm PVC/ABS: 3 mm Feed speed: 12–18 m/min Working height: adjustable via PLC MACHINE DETAILS Control: PLC EQUIPMENT Prsdoxx Nf Depfx Ab Ied Adjustable panel support guide Side roller conveyor with idler rollers for panel support Rectifier group Roller holder plate Gluing unit for EVA adhesive with premelter Edge pressing group Trimming group Scribing group with overlapping motors Tiltable copy unit Rounding unit with 4 motors Edge scraper unit Glue scraper unit Oscillating brush group

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included Prodpfx Absxa Egms Ijd – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Prodetvfmhepfx Ab Isd Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg

Condition: used, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 – 20 mm 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long, motor-driven adjustable infeed fence Pre-milling unit for panel edge preparation before the glue station, with 2 NC servo axes Syncro edge magazine, fully automatic for rolls and strips MOT3, with 2 motorized hold-down devices GLU-JET automatic glue application station; for cartridges and PUR bonding, thin film technology Glue height adjustment / touch nozzle Maximum edge height: 60 mm Pressure unit with 4 motor-pneumatically driven rollers, NC servo axis End trimming unit for rolls and strips up to 20 mm edge thickness, with electro-pneumatic adjustment of the trimming saws from 0–10° angle Flush trimming unit 20 mm MOT3, motorized horizontal adjustment Multifunction milling unit MOT6 with multifunctional milling technology Flush trimming 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy-milling unit MOT4, with automatic tool changer MOT2 and oscillating tracer, corner copying, postforming corners, with 4 NC-controlled axes; for top/bottom longitudinal edge milling and copy-milling of front/rear end vertical edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-scanning Usage-controlled, oscillating buffing unit for post-processing and edge polishing with 2 textile wheels Spraying units for infeed and outfeed, plus antistatic agent for pressure unit Infeed area electronically controlled separating agent spray device Pressure unit electronically controlled antistatic spray device Outfeed area electronically controlled cleaning agent spray unit with cleaning fluid Automatic chain lubrication Barcode scanner The machine is FACTORY-SERVICED and in TOP CONDITION Year of manufacture: 2021 / Leasing possible The machine is connected and ready for demonstration in the showroom Available from stock Lieboch Prodpfxexy Nxys Ab Isd

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, feed rate X-axis: 40 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 3,000 mm, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel height min.: 8 mm Panel height max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Format Cutting Unit Unit: Double top and bottom pre-milling unit Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Pre-melter for polyurethane adhesive Edge pressure roller conveyor Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling unit Number of motors: 2 Edge Processing Unit 3 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 4 Unit: Edge trimming unit Number of motors: 2 Edge Processing Unit 5 Unit: Top milling unit Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Prodpfxexxal Is Ab Isd Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 FEATURES PUR gluing system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 14 m/min, workpiece height (max.): 55 mm, controller model: TS 200 Touchscreen, TECHNICAL DETAILS Panel height: 55 mm Solid wood: 8 mm PVC/ABS thickness: 0.4–3 mm Feed speed: 14 m/min MACHINE DETAILS Control: TS 200 touchscreen EQUIPMENT Guide rail for panel insertion Side roller conveyor with idler wheels Roller holder plate Glue unit for EVA hot-melt adhesive with glue pot Edge pressure group for straight profiles with adjustable pressure rollers End cutting unit with 2 motors and tilt adjustment Fine trimming/trimming unit with 2 tilting motors Corner rounding unit with 2 multifunctional motors (Gleaner + Rounder) Edge scraper group Prsdpjxxy Hfjfx Ab Ijd Glue scraper group Brush unit Adjustable working height

Condition: excellent (used), CATALOG NUMBER: 7404 TECHNICAL DATA - Minimum workpiece thickness: 16mm - Maximum workpiece thickness: 60mm - Height to table surface: 920mm - Motor power: 1.2kW - Voltage: 400V - Disc – guillotine – feed rollers for tape – glue tank – 3 guide rollers (first one is the drive roller) - Worktable: 1600x670mm - Dimensions (L/W/H): 1600x1400x1100mm - Weight: 170kg ADVANTAGES – Polish manufacture – Suitable for edging both straight and curved edges – Used machine, in very good condition Net price: 5,900 PLN Net price: 1,400 EUR (based on 4.2 PLN/EUR exchange rate) Podpfx Aot H E Ikob Ijrd (Prices may change with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, feed rate X-axis: 25 m/min, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Podjxw U Easpfx Ab Isrd Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Operating Unit 1 Unit: combined roller/pad Roller material: rubber Operating Unit 2 Unit: vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Work table with fixed height Working level Feed belt

Condition: excellent (used), Catalogue number 7733 TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW Podpfx Asxdc Enjb Iord - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, workpiece width (max.): 1,300 mm, workpiece length (max.): 3,200 mm, Equipment: CE marking, TECHNICAL DETAILS Max. feed speed: 24 m/min Maximum panel thickness: 60 mm Minimum panel height: 10 mm Maximum panel height: 60 mm Minimum panel length: 320 mm Maximum panel length: 3,200 mm Minimum panel width: 150 mm Maximum panel width: 1,300 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Number of working units: 8 UNITS Trimming Unit 1 Function: Sizing Model: RT30 Motor Power: 3.5 kW Max. speed: 9,000 rpm Edge Processing Unit 1 Function: End Trimming Model: IT90-S Number of motors: 2 Max. processing speed: 28 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Psdpfxsxw T Tpj Ab Ierd Function: Edge Milling Model: RF10 Number of motors: 2 Motor power: 1 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Function: Multifunction Model: AR30 Number of motors: 2 Max. processing speed: 18 m/min Motor power: 0.65 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Function: Profile Scraper Model: RB40 Edge Processing Unit 5 Function: Glue Scraper Model: RC20 Edge Processing Unit 6 Function: Brushing Model: SZ30 Number of motors: 2 Motor power: 0.37 kW Max. speed: 1,400 rpm MACHINE DETAILS Installed total power: 25 kW Dimensions Conveyor length: 12,300 mm Width: 1,300 mm Length: 12,300 mm EQUIPMENT Jointing cutters Multifunction unit Top pressure Pressure via rubberised belts Panel support guide NC positioning Angled panel infeed system Automatic engagement by time Edge preheating lamps Coil magazine Hot-melt glue pot Hot-melt glue pre-fuser Edge pressure roller conveyor Spray unit SINTRA machine programming software Panel discharge via roller transfer conveyor Panel feed via motorised carpet belt Return system for left-side edge bander CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, feed rate X-axis: 25 m/min, edge thickness (max.): 3 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min MACHINE DETAILS Edge Processing Unit 1 Unit: End Trimming Model: WK13 Number of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Milling Number of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Psdpjxw T H Njfx Ab Isrd Edge Processing Unit 3 Unit: Multifunction Model: FK13 Number of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 Number of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush Number of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spraying unit Machine programming software PowerControl PC22 CE marking

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, rotational speed (max.): 10,960 rpm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum panel thickness: 50 mm Minimum panel height: 8 mm Maximum panel height: 50 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of positions: 1 Unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time: yes Motor power: 0.18 kW Speed: 10,800 rpm Unit 2 Unit: Edge milling Number of motors: 2 Automatic engagement by time: yes Motor power: 0.27 kW Speed: 10,960 rpm Unit 3 Unit: Edge scraper Control system: BFS MACHINE DETAILS Installed total power: 4 kW EQUIPMENT Upper pressure Pressure by spring-loaded rollers Panel support guide Magazine for the coil EVA glue system Podpfxjxw Tugj Ab Isrd Hot-melt glue pot Edge pressure roller track Number of pressure rollers: 3 CE marking

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, feed rate X-axis: 11 m/min, workpiece height (max.): 40 mm, edge thickness (max.): 6 mm, rotational speed (max.): 12,000 rpm, Equipment: CE marking, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. feed speed: 11 m/min Maximum panel thickness: 40 mm Min. panel height: 8 mm Max. panel height: 40 mm Min. edge thickness: 0.3 mm Max. edge thickness: 6 mm Maximum spindle speed: 12,000 rpm MACHINE DETAILS Trimming unit Unit: Format cutting Unit: Trimming Automatic engagement by time Motor power: 2.2 kW Edge heating lamps Coil magazine Number of positions: 1 Gluing system Hot melt glue pot Edge pressure roller conveyor Number of pressure rollers: 3 Podpexw Ttvefx Ab Ijrd Edge processing unit 1 Unit: End trimming Number of motors: 2 Automatic engagement by time Motor power: 0.18 kW Maximum speed: 12,000 rpm Edge processing unit 2 Unit: Top/bottom trimming Number of motors: 2 Motor power: 0.27 kW Maximum speed: 12,000 rpm Edge processing unit 3 Unit: Multifunction Number of motors: 1 Motor power: 0.35 kW Maximum speed: 12,000 rpm Edge processing unit 4 Unit: Scraper Edge processing unit 5 Unit: Buffing Number of motors: 2 Motor power: 0.1 kW Total installed power: 13 kW EQUIPMENT Control system: PC 16 CE marking

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, feed rate X-axis: 11 m/min, edge thickness (max.): 3 mm, plate height: 60 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum feed speed: 11 m/min Maximum panel thickness: 60 mm Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum panel width: 70 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm Number of working units: 5 Maximum rotation speed: 12,000 rpm MACHINE DETAILS Unit: Pre-trimming unit Unit: Finishing/Adjustment unit Automatic engagement by time: yes Motor power: 2.2 kW Edge pre-heating lamps Coil magazine Number of positions: 1 Adhesive system Glue pot for hot-melt glue Prefuser for hot-melt glue Edge pressure roller track Number of pressure rollers: 3 with NC positioning Edge processing unit 1 Unit: End trimming unit Number of motors: 2 Maximum processing speed: 11 m/min Motor power: 0.18 kW Pjdpfx Abexw Tngj Isrd Maximum rotation speed: 12,000 rpm Edge processing unit 2 Unit: Edge milling unit Number of motors: 2 with NC positioning Motor power: 0.55 kW Maximum rotation speed: 12,000 rpm Edge processing unit 3 Unit: Edge scraper Edge processing unit 4 Unit: Glue scraper Total installed power: 13 kW EQUIPMENT Control system: EASY CONTROL EC 10+ CE marking