Used Notch for sale (355)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 4955 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 87 kg Hjdpfxsyui S Rj Agwoni The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5760 € Hnsdpfxeyui Sqs Agwei 111.17 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande Hnodpsyq Svdsfx Agwsi 788 € 3/4" 26,9 mm, 1" 33,7 mm, mm 3 mm 2.5 mm 8 kg The AL 1 can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1") and 42.4 mm (1 1/4"). The hand-operated machines can be easily wall h ALMI pipe notchers filing or milling pipes has become a thing of the past. The major benefit of this pipe notcher, compared to other notchers, is that one unit can be used to notch a series of diameters without needing to change parts for each diameter. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 1032 € 1 1/4" 42,4, 1 1/2" 48,3 mm 3 mm 2.5 mm 15 kg The AL 3 can be used to notch pipes with an external diameter of 42.4 mm (1 1/4”) and Ø48.3 mm (1 1/2”). Hnodpfxeyq Su Te Agwoi ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 951 € Hjdpfx Ajyq Su Hegwsni 1 1/2" 48,3 mm, 2" 60,3 m mm 3 mm 2.5 mm 15 kg The AL 2 can be used to notch pipes with an external diameter of 48.3 mm (1 1/2") and 60.3 mm (2"). ALMI products are subjected to stringent quality control inspections before they leave the factory. ALMI’s pipe notcher, in contrast to punch-cutting machines with separate auxiliary tools, is always available for immediate use. Moreover, the price is more affordable than the auxiliary tools for punch-cutting machines. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are available immediately, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 853 € 20 - 76,1 mm 3 mm 2.5 mm Hnjdpfxoyq Snyo Agwsi 7 kg The ALU can be used to notch a sink outflow in pipes with an external diameter of 22 mm to 76 mm. Since ALMI pipe notchers have a favourable price and high productivity they are an excellent investment. ALMI pipe notchers are available for cutting out venting slots in round and rectangular met pipes with an external diameter from 27 mm upwards and a wall thickness of a maximum of 3 mm. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are immediately available.

Condition: good (used), functionality: fully functional, Year of construction: 1998, Used notching machine from Euromac Hnodpfx Asyu H T Ejgwei Model: 220 6 S Capacity: 220 x 220 x 6 mm

Condition: excellent (used), Timber framing chain saw ZSX EC 400 HM - 14.1 kg - 3000 watts - Cutting depth: 400 mm - 230 volts Hnsdpfxoyty Exo Agwsi - with trolley and spare chain

Condition: used, Year of construction: 2012, gebraucht 2012 9690F prompt, Zwischenverkauf v China 690 € 1 100 mm 3 mm 90 ° Hedpfsynm Ddox Agwoni 90 kg Beidseitig verstellbare Anschläge Fingerschutz Ausrüstung gemäß CE Vorschriften

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Hsdpfxjrz Tutj Agwjni Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Year of construction: 1998, condition: ready for operation (used), machine/vehicle number: 31234, Precision Vee-cuts in aluminium and PVC profiles Pneumatic continuously adjustable saw blade feed for fast and precise sawing with rapid return Simple setting of cutting depth Equipped with connection for swarf extraction hose and swarf container as standard Cutting range for Vee-cuts: cutting depth 80 mm, profile height 100 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Hnodpfsyt Nitjx Agwji Power output per motor 0.9 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 44 l with spraying Length 980 mm, depth 800 mm, height 1,650 mm, weight 240 kg Machine is ready for operation saw blades were sharpened.

Condition: good (used), Year of construction: 2007, Blade length: 200 mm For plate thickness: 6 mm Hydraulically driven Variable angle Machine weight: 1,200 kg Hedpfxsyuyale Agweni

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Hedpfx Aoyupnxjgwjni

Condition: new, messurements (LxWxH): 0,80 x 0,85 x 1,20weight approx.: 0,610total power requirements: 4sheet thickness: 6Details: Hydraulic drive, 6 mm at 90° (fixed) Blade length: 200 mm Notching angle: 90° Hnodod Ab Icspfx Agwei

Year of construction: 2021, condition: ready for operation (used), A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible. Hnjdpfx Agoyugl Iswoi

Condition: used, Year of construction: 1999, plate thickness 4 mm Hnsdpjvy Iklsfx Agwoi plate length 200 mm total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm no. of strokes 200 - 1000 /min distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm power requirement 6,0 kW Hjdpfjw U Ekvsx Agwsni Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Hodoi Duh Iepfx Agwjni Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Hodorzfh Hspfx Agwjni Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: good (used), Year of construction: 1995, Automatic notching machine for cross joints (see attached prospect for technical data). Second-hand machine in good condition, tested in our workshop before delivery. Hedsyr A Umopfx Agweni

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020158, Variable notching possibilities for mullion and transom combinations, e.g. for curtain walls, conservatories, sky lights, and special designs Precise and safe notching is ensured because the workpiece is fixed and only the saw units move Both saw units are adjusted in height simultaneously by means of a hand wheel (analogue display on the hand wheel) The cutting depth is set using an analogue display Manual angle adjustment of the saw blades using a digital display of the tilting angles Support table with compound slide and pivoting back fence is manually adjustable for optimal use of the cutting range The angle of the pivoting back fence is shown on a digital display Horizontal and vertical profile clamping Automatic working cycle at a 90° pivoting angle (two-hand control when cutting special angles) Hydro-pneumatic saw feed Hjdpfx Agoyfhvpowoni Lower saw unit (vertical): Saw blade diameter 550 mm Tilting range from 45° forwards to 60° towards the rear Max. cutting height of 210 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Upper saw unit (horizontal): Saw blade diameter 500 mm Tilting range from 55° downwards up to 60° upwards Notching depth, max. 190 mm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW with motor brake Saw blade speed 2,800 rpm Manual tilting angle adjustment with digital display Travel 830 mm max. Support table with working height of 990 mm: Pivoting range from 30° left to 30° right, home position 0° Pivoting range manual with digital display Compressed air supply 7 bar Air consumption per working cycle 35 l without spraying, 45 l with spraying Length 3,000 mm, depth 1,420 mm, height 1,600 mm, weight 1,250 kg

Condition: excellent (used), functionality: fully functional, tool diameter: 450 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 400 kg, cutting height (max.): 153 mm, saw blade speed: 2,800 rpm, mount diameter: 40 mm, power: 0.003 kW (0.00 HP), Equipment: rotational speed infinitely variable, GRAULE Facade Saw type AS 450 Transport: 350 EUR Motors: 2x 400 V/3.0 kW Rotational speed: 2800 rpm Vertical blade diameter: 450 mm Horizontal blade diameter: 400 mm Blade mounting diameter: 40 mm Cutting height: 153 mm Hnsdpfxsthdrwo Agwoi Cutting depth: 110 mm Cutting width: 250 mm

Condition: excellent (used), Year of construction: 1999, power: 5.5 kW (7.48 HP), input voltage: 400 V, We offer this very well-maintained Indumasch VA 200/6 K notching machine, year of manufacture 1999. Hnsdjyrytmopfx Agwji Rated voltage: 400 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), overall weight: 1,200 kg, cutting length (max.): 200 mm, Selling our notching machine FIM Versa 206 Machine can be tested under power at any time. TECHNICAL DATA ; Capacity: 200 x 200 x 6 mm steel ; Hsdpfxovld Hyj Agweni Table dimensions: 1000 x 750 mm ; Blade length: 200 mm ; Angle adjustment: 30 - 60° / 60 - 135° Power: 4KW Total weight: approx. 1200kg

Condition: good (used), plate thickness 6.5 mm thickness at "Niro-steel" 5.0 mm angle adjustable from - to 30 - 140 Grad no. of strokes ca. 50 Hub/min table: 950 x 1030 mm Hnodsyk Dhfjpfx Agwji blade length 220 x 220 mm total power requirement 4.0 kW weight 800 kg range L-W-H 1100 x 950 x 1280 mm current new price approx. 20.000 euros good condition (!!) special price on request Equipment: - electro-hydraulic notching machine - multi-function machine with 2x work stations * 1x notching, 1x unit for radius rounding * including radius punching tools - manual angle adjustment 30 - 140 degrees * 2x handwheels for angle adjustment - large / stable work table - 2x new angle stop, adjustable - automatic cutting gap adjustment - 1x freely movable foot switch - connection cable + 16A plug - cutting performance: * 6.5 mm to 60° ST * 5.0 mm to 60° VA * 4.0 mm to 30° ST * 3.0 mm to 30° VA