Used Kappa 550 for sale (2,809)

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 45°-750-550 IR700 RA1451 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 680 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2001 Optionally included: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Dujdpfok Aba Tox Acpsw For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2000, Transnorm belt curve conveyor left GKF 70°-730-600 IR600 RA1936 The Transnorm belt curve is fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 730 mm belt width (GuB): 550 mm height (BH): 210 mm Duodsk Ablpepfx Acpjw Inner radius (IR): 600 mm Conveying angle: 70° degrees support feet: optionally available Conveying speed (v m/s): freely adjustable with frequency converter between 0,032 and 1,17m/s, Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2000 Scope of delivery: without supports Optionally available: Supports Side guide one- and both sideds Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 1900-1800-550 RA1149 TYear of manufacture 2007 perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 / 1800 mm conveying length: 1900mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Dujdpfx Acjk Aa Eiepjw brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Duedjk Aa T Rspfx Acpsw Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 850 mm Conveying angle: 160° degrees support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 belt: double layer, green, smooth Year of construction: 2001 Characteristic / Accessories: Lateral guides included on both sides Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller conveyor turnout sorter switch diverter ejector 45° 2400-1300-550 RA1147 Type 356.10 year of construction 2007 Duodpfx Ajk Aa Ebjcpow perm. weight load: 30 kg/m dead weight: 40 kg/m roll width: 550 mm nominal/external width (NB): 610 mm push-off element: roller adjusted headroom: 680 mm conveying speed: 0,35 m/sec. Brake for dust operation on discharge track drive of discharge mechanism: electric dimensions of the conveyed material: l x w = 600 mm x 400 mm Optional: Adjusted height on your request Electrical attachments like light barriers, barcode sensors Control/Software Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2007, Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Dujdpfx Aek Aa Nbjcpsw Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GF 45°-750-550 IR700 RA1390 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 766 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 700 mm Conveying angle: 45° degrees support feet: optionally available Conveying speed (V m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz v380-500, kW 0.11 / 0.55 / S1 belt: double layer, green, smooth Year of construction: 2001 Optionally available: Supports Side guide one and both sides Dodpfok Aa T Hex Acpeuw Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 6,03,000 km, power: 353 kW (479.95 HP), first registration: 04/2004, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, loading space length: 6,300 mm, loading space width: 2,450 mm, Year of construction: 2004, Equipment: ABS, crane, parking heater, DAF CF 85.480 Platform 6,30 m + CRANE + JIB + REMOTE CONTROL / 8x4 Duodoy Eu N Repfx Acpow Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2004 ? MILAGE: 603 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ? AIRCONDITION PLATFORM: 630 x 240 cm (L x W) CAPACITY: 11 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 205/360/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING CRANE: EFFER 550 H 4/S + 4S + REMOTE CONTROL VIN: XLRAD85XC4E629068 TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr)

Condition: used, Cast bed Length: 2410 mm Dujdpfxjzg Huls Acpjw Width: 1500 mm Thickness: 550 mm 8 T-slots 50 x 27 mm with 2 opening (possibility to close them) 1 opening L 560 x W 500 mm 1 opening L 480 x W 360 mm Weight: approx 5 T

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,290 h, load capacity: 1,400 kg, lifting height: 3,160 mm, free lift: 1,350 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Automatic Condition: Refurbished, without warranty Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 48V Battery Ah: 625Ah Battery manufacturer: IBH Battery year of manufacture: 2022 Battery condition: 80 - 100% Description: Price includes a new UVV inspection (we use original Still parts), new paint (original Still), refurbished and tested battery from 2022 with a Kappa test result of 85% (value EUR 1,950.00 net), matching charger with plug. We can arrange cost-effective transport for you. Lease-purchase option available!!! Dodpjwct Tcsfx Acpsuw Side shifter, 3rd valve, rear work light, front work light, full free lift, CE certificate, Multi-directional control levers

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m Dodpfxou Ic Aio Acpsuw total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg *

Condition: used, Year of construction: 2017, Equipment: all wheel drive, Beautiful, clean machine – top-notch equipment! Machine handover to the customer: 08/06/2018 Every service performed by Liebherr – last service at 10,020 hours on 03/13/2025 Liebherr L 546 Z 2plus1, Chassis No. VATZ1560CZB045579 Year of manufacture: 2017 Operating hours: approx. 10,711 4-cylinder inline engine, 120 kW / 163 hp, water-cooled with turbocharger, emission stage 4 Operating weight: approx. 14,300 kg Length: 7,200 mm, Width: 2,500 mm, Height: 3,280 mm * Ride oscillation damper – boom dampening * Automatic climate control – maintains the set temperature * 3rd and 4th hydraulic control circuits for attachments such as high-dump bucket, grapple bucket, etc. * Ride oscillation damper BSS – boom dampening * Central lubrication system, factory-installed by Liebherr * Filter screen in front of the cooler prevents contamination * Cooler with coarse mesh for easier cleaning * Reversing fan for cleaning the cooler – reverse operation * Climbing aid in front of the windshield for easier cleaning of the windshield * Air filter with pre-separator “TopSpin” for pre-cleaning the intake air * Premium display with touchscreen * Driver's seat “Comfort” with pneumatic suspension, seat heating, and headrest * Adjustable steering column in height and inclination * Armrests on the left and right * Hinged window on the left in the driver's door * Radio * Lamp bracket for front headlights made of steel instead of plastic * 4 work lights on the roof of the driver's cab at the rear, LED * 4 work lights on the roof of the driver's cab at the front, LED * 2 auxiliary headlights on the hood at the rear Duedpfx Ajzfymlecpow * Reversing warning system (audible - beeper), can be switched off * Rear-view monitoring with camera * Tow hitch at the rear * Crane eyes at the front of the frame and at the rear * Tires 20.5 x 25 VA 2 x 40% * Tires 20.5 x 25 HA 2 x 40% * Windshield cracked!!!! Net price with permanently mounted 2.8 cubic meter bucket: 55,900.00 EUR net + VAT Optional equipment available at an extra cost: * Hydraulic quick coupler: 3,550.00 EUR * Grapple bucket, 3 cubic meters: 3,980.00 EUR * Volume bucket, 5 cubic meters: 3,990.00 EUR * High-dump bucket from 3-5 cubic meters: from 3,950.00 EUR * Pallet forks, 5 or 8 tons: from 2,190.00 EUR * Can also be supplied with a scale: * e.g. Pfreundt WK 50: 3,900 EUR * Also available with printer * All prices are net for export – plus 19% VAT for domestic sales. We can gladly offer the transport to your location. Sale only to businesses or for export. Sale in "as is" condition, as the machine stands. No guarantee or warranty. The stated mileage or operating hours are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided is not to be regarded as guaranteed characteristics. The description and the information contained therein serve only for general identification of the vehicle and do not constitute a guarantee in the sense of contract law. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment may be subject to separate charges.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK32 - Spindle power : 17 [kW] - Spindle speeds : 30-42000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 550/400/400 [mm] - Rapid traverses rates (X/Y/Z) : 30 [m/min] A ROTARY AXIS - Travel : 120 [°] (+/-) - Indexing precision : 0.0001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.0001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 32 TABLE - Table dimensions : 450 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1900X2580 [mm] - Machine height : 2260 [mm] - Machine weight : 7200 [kg] MACHINE HOURS - Number of hours under power : 12558 [h] - Number of working hours : 6602 [h] EQUIPMENT - CNC : INGERSOLL ANDRONIC - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - Electronic handwheel - Linear scales - 3 colors status lamp - Micro-lubrification coolant - Spindle cooling unit Dusdpfx Aouhbtkocpjw - Tool probe : BLUM

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, Equipment: rotational speed infinitely variable, H. Ernault.Somua lathe CE certification Cholet 550 model Newall DP 700 2-axis digital read-out system Completely retrofitted in 2020 Duodpfx Ajzb In Rjcpew Reference: E038

Condition: used, Używany kwasoodporny mieszalnik wstęgowy produkcji Winkworth (Anglia). Pojemność robocza około 550 litrów (zależnie od produktu). Komora mieszająca ma wymiary około 1140 mm długości x 815 mm szerokości x 1015 mm głębokości. Posiada pojedynczą przerwaną wstęgę wykonaną ze stali kwasoodpornej o średnicy około 800 mm, napędzaną przez przekładnię silnikiem elektrycznym o mocy 5 KM, 1440 obr./min, 380-440 V, 50 Hz. Posiada otwierane na zawiasach pokrywy wykonane ze stali kwasoodpornej z każdej strony i siatkę zabezpieczającą z jednej strony. Posiada otwór spustowy na dole, umieszczony niecentralnie. Dujdsykn T Sepfx Acpjw Specifications: Capacity: 550 ft³ Dimensions: 44.8819 x 32.0866 x 39.9606

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 1,00,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a dual miter saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all miter angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. Connection to window construction software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting - Crosscut Djdpfezav U Nox Acpouw - Automatic cutting - Connection to external software possible (Orgadata, Unilink, Wiktop... etc.)

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers Dodpsy Eyy Uofx Acpjuw

Condition: excellent (used), functionality: fully functional, The container was fitted with breakwaters to make it a viscous material promote mixing. Cool and heat the material using the jacket on the tank is done with liquid. Stainless still tank! Sizes: Height 1000 mm Diameter: 850 mm Volume: 550 l Electric motor: Manufacturer: Bauer 1,5kw 380v 50hz Type: D7300 Speed: 32u/min Dodpfsg Rcp Hjx Acpsuw Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 550 mm, total length: 7,500 mm, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, saw blade bore: 32 mm, Emmegi Twin 550 double mitre saw for aluminium and PVC. The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor from 45° (internal) to 22°30’ (external) with a precision of 240 positions per degree. The machine features the following accessories: -Preparation for a label printer, which enables labelling and assignment to the corresponding order -Retractable material support -Support for long profiles (roller conveyor) -Industrial PC with Windows Embedded -Additional tensioner on the roller conveyor -Pro software package -Overlength cut -Cross cut -Shortcut -Automatic cut -Connection to window construction software (orgadata / Unilink / Wictop...etc) possible Dedjzak Iqopfx Acpjuw Well-suited for precise and industrial processing of profiles in window and door manufacturing.

Condition: new, Year of construction: 2026, fuel type: diesel, power: 440 kW (598.23 HP), motor manufacturer: Iveco CURSOR13TE6, General information Field of application: Construction Weights Empty weight: 4.700 kg Functional Generator capacity: 550 kVA Dimensions of cargo space: 425 x 160 x 245 cm CE mark: yes Other information Fuel consumption: 72.5 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A47C Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Production country: CN Additional information Dujdpfx Ajxbwv Aocpjw Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm Dujdpozhn Txofx Acpow column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2010, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, An automatic saw with unloading chain conveyors Djdpfx Acoy Tl Sljpjuw

Condition: new, Year of construction: 2021, Technical Specifications – kappa 400 / x-motion: Saw blade diameter: 250–400 mm Cutting height: max. 133 mm (at 90 degree) Saw blade tilting: 0 – 45 degree Speeds: 3500 / 4500 / 5500 rpm Dusdoy Nc Dkopfx Acpsw Motor power: 5.5 kW (7.5 HP) Motor voltage: 3x 400 Motor frequency: 50 Hz Sliding table length: Standard 2500 mm Cutting width: 800 mm"X-Roll" system: (maintenance-free, roller bearing guidance) Control system: x-motion CNC control, 3-axis control Control panel: 5.7” (145 mm) TFT touch colour screen Features: Maintenance-free tilting segments: "Easy-Glide" Dust extraction port: Ø 120 mm (bottom) / Ø 80 mm (top) Weight: approx. 900 kgs The machine is in new condition and never has been used at all.

Condition: good (used), WALTHER CN 550 PN Trowal + RÖSLER Z300 Turbo Floc Centrifuge -Walther Trowal + Rösler Centrifuge -Coating in good condition -Rotational speed: 1460 RPM -Capacity: 550 liters -Motor: 3.5 kW -Pneumatic soundproofing cover -Control cabinet -SEPARATION UNIT -Dirty water / drainage system -Compound + 2 boxes of sliding stones -Documentation -Dimensions: L x W x H: 2 x 1.8 x 1.8 meters / Weight: 1500 kg Duodpfxoyh Ezls Acpow RÖSLER Z 300 TURBO FLOC / Centrifuge -Year of manufacture: 1996 -Rotor speed: 3160 RPM -Power: 4 kW -Max. throughput: 800 liters per hour -Documentation -Dimensions: L x W x H: 1.7 x 1 x 1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: used, Year of construction: 2018, Wood chip boiler Schmid UTSK 550, underfeed firing system with a moving grate, output 550 kW, year of manufacture 2018, including feed screw with backfire protection, including infeed screw, including pneumatic cleaning, including flue gas recirculation, including multi-cyclone separator, including ash removal system, including control system for Schmid boilers, including electrostatic precipitator from Meisterfilter, including control system – electrostatic precipitator, including ash removal system for electrostatic precipitator, including flue gas fan. Dismantling must be carried out by the buyer. Not included: - Bunker discharge system Duedpfx Acsvgcwmopjw - Chimney Information regarding the bunker discharge system: If you are interested in a moving floor or agitator discharge system, I can assist you.